How can i make changes from the user in TabBar with more button persistent? I´m using the Storyboard.

I have build an App with more than 5 Tabs, the user can change the order of the items, but this is not persitent.
How can i fix this on iOS 7 and i´m using the Storyboard.

Can I do it afterwards ?
Yes. In addition to what Bee Jay said, here are some other tips.
First record a pattern that's a few bars long, and don't tweak any knobs while you're doing this. Set a Cycle Range, because we want to play this pattern over and over again. Press A to make Automation visible (although there isn't any yet).
Find the channel strip for this track, either in the Inspector or in the Mixer window. Just above the meter, look for the button that says "Off." Hold down this button and a menu will appear. Select "Touch." Press Play. As the pattern plays the first time, pick a knob in the ABL2 window, and mess with that knob. At the end of the pattern, let go of the knob, and then watch what the knob does as the pattern plays again. Then as the pattern plays some more, mess with another knob. You'll notice that curves are being drawn in the Arrange window as you mess with the knobs.
This should help get you started.

Similar Messages

How can I make Microsoft Wireless Intellemouse Explorer 2.0 horizontally scroll my LabVIEW block diagrams using the tilting wheel?

I bought this expensive mouse in high hopes that I could use the tilt wheel left/right to scroll horizontally, but it does not do it! Vertical scrolling works great. LabVIEW 7.0. Please help! I'm tired of going to the horizontal scroll bar on my block diagrams!

This doesn't exactly answer your question, but if you use the auto tool, press and hold and you get the Scrolling Tool. That will let you drag the diagram or panel around quickly.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

HT4527 i just copied some music from my external hard disc to my macbook . how can i make all that music be shown in my iTunes without having double copies of the music??

i just copied some music from my external hard disc to my macbook . how can i make all that music be shown in my iTunes without having double copies of the music??

Hello Sudhanshu Mishra,
Thank you for using Apple Support Communities!
You can have iTunes reference the content where ever it is on your HDD without copying the content to the iTunes library, thus using twice the space.
If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
From: Adding music and other content to iTunes
http://support.apple.com/kb/HT1473
Additionally if you want the content to then ALSO be located in your iTunes Library folder so everything is all kept together nice and tidy, use this:
Consolidate your files in the iTunes folder
Depending on how you imported items into iTunes, some items in your library might be stored in different locations (in another folder or on another hard disk, for example).
You can consolidate all the files in your library in the iTunes folder—for example, to make it easier to move your library to a new computer.
Choose File > Library > Organize Library.
Select “Consolidate files.”Files remain in their original locations, and copies are placed in the iTunes folder.
To create folders (Music, Movies, TV Shows, Podcasts, Audiobooks, and so on) inside your iTunes folder, and place all your imported media files in the appropriate folders, select “Reorganize files in the folder ‘iTunes Media.’”
From: help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePath=English.lproj# itns2999'
Cheers,
Sterling

How can I make albums from events then delete events without deleting the album?

Hey, just need a little help!
How can I make albums from events then delete events without deleting the album?
Many thanks

You'll be more likely to get help with this if you ask in the iPhoto forum:
https://discussions.apple.com/community/ilife/iphoto
You'll need to tell people what version of iPhoto you have so they can give you correct advice.
Regards.

How can i make still from 16:9 film tot bitmap without distortion?

how can I make stills from my 16:9 movie to bitmap without having distortion?
! work with Adobe Premiere Elements 10

Bernard Bussemaker
If you really have a 720 x 576 Standard Widescreen Video 16:9 (PAR = 1.4587) and you want a jpg still capture from it using Premiere Elements 10, then I suggest the following:
Premiere Elements 10
Project Preset = PAL DV Widescreen
Place the Timeline Indicator to the frame that you want as a jpg image.
Go to
Share
Computer
Image
and there set Presets = DV PAL SD (it is long story, but you do not have much choice at that level), so
you could experiment with JPEG - HD 1920 x 1080 but no sure how that is going to look going from 720 x 576 to 1920 x 1080, so
Under the Advanced Button/Video Tab of that preset, set
Frame Width 1024 or 1050 pixels
Frame Width 576 pixels
Aspect = Square (1.0)
("or" relates to....if you just want a 16:9 jpg still, then 1024 will do fine. If you want a 16:9 jpg still that will present in a Premiere Elements project to fill the Edit Mode monitor, then 1050.
1024 x 576 is the square pixel version of the non square pixel version 720 x 576 widescreen which is stretched for display after encoding.
Image can resize downward if necessary. More details on that later.)
If the details of what I have suggested are too much, then just try the suggestion step by step and then let us know if it works for you. If any questions or you need clarification on anything written, please do not hesitate to ask.
If you are really dealing with a 720 x 576 4:3 standard video, we can go through that next.
But the answers are in the details.
Thanks.
ATR

How can 1 make an object of user defined class immutable?

Hi All,
How can one make an object of user defined class immutable?
Whats the implementation logic with strings as immutable?
Regards,

Hi All,
How can one make an object of user defined class
immutable?The simple answer is you can't. That is, you can't make the object itself immutable, but what you can do is make a wrapper so that the client never sees the object to begin with.
A classic example of a mutable class:
class MutableX {
    private String name = "None";
    public String getName() {
        return name;
    public void setName(String name) {
        this.name = name;
}I don't think it's possible to make this immutable, but you can create a wrapper that is:
class ImmutableX {
    private final MutableX wrappedInstance;
    public ImmutableX (String name) {
        wrappedInstance = new MutableX();
        wrappedInstance.setName(name);
    public String getName() {
        return wrappedInstance.getName();
    // Don't give them a way to set the name and never expose wrappedInstance.
}Of course, if you're asking how you can make your own class immutable then the simple answer is to not make any public or protected methods that can mutate it and don't expose any mutable members.
Whats the implementation logic with strings as
immutable?
Regards,I don't understand the question.

How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

If your "older" MBA has a Thunderbolt port then it isn't that old. See Target Disk Mode about how it's used. Note that without a monitor you won't be able to tell from the screen when it has fully started, and if it succeeded in starting in TDM. If it did, then the hard drive should appear on the Desktop of your new computer. You can then access it to transfer your files. You can even use Migration Assistant or any backup utility to transfer data. Just don't try to transfer system files.

How can I remove "invitations" from a shared iCloud calendar when I am not actually invited to the event?

How can I remove invitations from a shared iCloud calendar when I am not actually invited to the event?
My wife and I share our calendars and she uses it very frequently. Every time she enters a new event on her calendar I get a notice (invitation?) in the Calendar app, even though I am not invited to the event she created.
I would like to continue being able to share our calendars but I do not want the hassle of an Invitation popping up every time she enters an event.
Thanks!

You can sync photos and itunes content with one and only one computer at a time. When you sync to another, it will erase the current content and replace with content from the new computer.

In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

Hi,
I don't know of a preference, but have you used ⌘-T in iCal?
Best wishes
John M

How can I make my Apple tv remote stop interacting with my MacBook and my iMac? Everytime I press the reote, the sound will go up or down on my computers or they will wake up.

How can I make my Apple tv remote stop interacting with my MacBook and my iMac? Everytime I press the reote, the sound will go up or down on my computers or they will wake up.

Welcome to the Apple community.
If you don't want to use a remote with your computer the easiest thing to do is just to turn the IR off. (System Preferences/Security/General)
If you still want to use your computer remote then you must pair your computers remote with the computer AND the Apple TV remote with the Apple TV.
To pair a remote with a device hold down the menu and FF buttons together for six seconds or until you see a chain icon on screen (best take the computer into another room, or turn it off, when you do this)

How can print a report from form 6i, when I press a button?

hi Friends,
How can print a report from form 6i, when I press a button?
When i press a button from Form 6i, the report should print through printer.
I have done it by using report parameter DESTYPE Printer but problem is that when I press a button printer dialogue box appear and then I give command Print to printer, I don’t want to show Printer dialogue box.
I want when I press a button form Forms 6i , printer will print my report directly.
Please send me the solution of this problem.
Best regards,
Shahzad

Hi
If You are using Client server application then to passing to Add all Print Parameter in the Host Command.
Means Print command in unix to Host(lp.............) and Other Parameter to file name of the report to print.
If You not Use Client Server Application the Also Passing a Host Command in Button-Pressed Event and Run.

How can i stop firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages

How can i stop Firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages
i use Firefox 22.0 on windows 7
it's about one week that it ask for "Network Connections" when i'm offline and disconnected from the internet even when i don't open a save page and just opening Firefox with a blank page
Image of the Error:
http://home.sums.ac.ir/~rowshansh/firefox.png
http://www.sums.ac.ir/~rowshansh/firefox.png

Did you check the network setting?
Sounds that you have set to connect automatically when a connection is not available.
*http://kb.mozillazine.org/Autoconnect
*http://kb.mozillazine.org/Browser_attempts_to_connect_when_already_connected

How can I make music (mp3) play automatically in one Scene (NO buttons)?

How can I make an mp3 play automatically in one Scene (NO buttons)? I have been searching the net for answers for over 10 hours with no answer... My movie will not be for the web, it needs to be portable (CD or flash drive)...
PLEASE HELP!!!!!!!
thank you!

You just need to look in Help for the Sound class and possibly SoundChannel... if you have an MP3 in your library - right click it, and go to properties. Set the sound to export for ActionScript - and give it a class name - mySound will work. Then you can make it play with something as simple as:
var a:SoundChannel = new mySound().play();

HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

HT201365 Now that I have upgraded to iOS 7, how can I make it so that I don't need a password every time I use my iPad?

Now that I have upgraded to iOS 7, how can I make it so that I don't need a password every time I use my iPad?

In v6 airport utility "Join a wireless network" is not available once the TC is setup.
You must reset to factory and try again using the selection options.. and it can fail or not come up.. This is an extremely poor way to setup a TC.. and you should NEVER EVER DO IT.. that is why apple removed it. Since you are joining wireless it makes no difference where the TC is located.. since it would become a dumb AP and turn off its ethernet ports.
Place it right next to your main modem router, plug in by ethernet, and select bridge mode and create a wireless network. Never use Join a wireless network..
However for completeness here is the method.
How do I setup my time capsule with wireless internet?
Never ever do it.
If you need internet by wireless and backup to the TC.. then simply plug the TC directly into the Mac.
Run dual network.. Setup explained here.
Using Time Capsule hardwired to Mac for back-up only.

How can i make changes from the user in TabBar with more button persistent? I´m using the Storyboard.

Similar Messages

Maybe you are looking for