How can i make iphone mobile website, database in Sql Server 2005 ?

how can i make iphone mobile website, database in Sql Server 2005 ?
Thanks & Regards
Jamshed Ali
Email id: [email protected]

You need to be a little clearer in what you're asking.
You can't make any web site in SQL Server - it's a database engine, not a website tool.
What you can do is create web sites that pull data from a back-end SQL Server, but the SQL server doesn't handle the client connection at all (that's handled by a web server such as Apache, IIS, or similar).
There are many ways to build such a site including .NET, PHP, Perl and more (although I don't know all the options for Windows servers because they're not as common outside of corporate/enterprise networks).
In either case, given your choice of development language (HTML, plus one of the PHP/Perl/.NET/etc. options), plus your database (SQL Server) plus your web server (IIS, Apache, etc.) you can make any web site you like (or, at least, you're capable of developing).
If you want to opimize that web site for iPhones then there are many references on how mobile browsing differs from the desktop. I'd recommend this book as a reference (and, yes, I understand the irony of linking to a paperback book for web design guidance ). Googling mobile web design (or iPhone web design) might yield more results.

Similar Messages

How can I make sure that in RAM our sql server is not facing any mermory crunch issue?

The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks

The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks
The best way to make sure you are not facing memory pressure is to use perfmon counters and monitor various memory counters
For SQL Server 2005 - 2008 r2 use below counters
SQLServer:Buffer Manager--Buffer Cache hit ratio(BCHR): IIf your BCHR is high 90 to 100 Then it points to fact that You don't have memory pressure. Keep in mind that suppose somebody runs a query which request large amount of pages in that
case momentarily BCHR might come down to 60 or 70 may be less but that does not means it is a memory pressure it means your query requires large memory and will take it. After that query completes you will see BCHR risiing again
SQLServer:Buffer Manager--Page Life Expectancy(PLE): PLE shows for how long page remain in buffer pool. The longer it stays the better it is. Its common misconception to take 300 as a baseline for PLE. But it is not,I read it from
Jonathan Kehayias book( troubleshooting SQL Server) that this value was baseline when SQL Server was of 2000 version and max RAM one could see was from 4-6 G. Now with 200G or RAM coming into picture this value is not correct. He also gave the formula( tentative)
how to calculate it. Take the base counter value of 300 presented by most resources, and then determine a multiple of this value based on the configured buffer cache size, which is the 'max server memory' sp_ configure option in SQL Server, divided by 4 GB.
So, for a server with 32 GB allocated to the buffer pool, the PLE value should be at least (32/4)*300 = 2400. So far this has done good to me so I would recommend you to use it.
SQLServer:Buffer Manager--CheckpointPages/sec: Checkpoint pages /sec counter is important to know about memory pressure because if buffer cache is low then lots of new pages needs to be brought into and flushed out from buffer pool,
due to load checkpoint's work will increase and will start flushing out dirty pages very frequently. If this counter is high then your SQL Server buffer pool is not able to cope up with requests coming and we need to increase it by increasing buffer pool memory
or by increasing physical RAM and then making adequate changes in Buffer pool size. Technically this value should be low if you are looking at line graph in perfmon this value should always touch base for stable system.
SQLServer:Buffer Manager--Freepages: This value should not be less you always want to see high value for it.
SQLServer:Memory Manager--Memory Grants Pending: If you see
memory grants pending in buffer pool your server is facing SQL Server memory crunch and increasing memory would be a good idea. For memory grants please read this article:
SQLServer:memory Manager--Target Server Memory: This is amount of memory SQL Server is trying to acquire.
SQLServer:memory Manager--Total Server memory This is current memory SQL Server has acquired.
8. Free List Stalls/sec – Number of requests per second that had to wait for a free page
9. Free Pages – Total number of pages on all free lists (free lists track all of the pages in the buffer pool that are not currently allocate to a data page, and are therefore available for usage immediately)
NOTE: If you have NUMA system don't use PLE to monitor memory condition it wont give correct value
From 2012 Onwards
Memory management has become easy from 2012 onwards as
Max server memory also allocated memory for requests which require memory >8KB
SQLServer:Memory Manager:Free Memory (KB)
SQLServer:Memory Manager:Target Server Memory (KB)
SQLServer:Memory Manager:Total Server Memory (KB)
For NUMA system its also wort monitoring each node.
Object - SQLServer:Memory Node:Total Node Memory
(KB)
Object - SQLServer:Memory Node:Target Node Memory
(KB)
Object - SQLServer:Memory Node:Free Node Memory
(KB)
Ideally if target server memory is less than or equal to total server memory there wont be memory pressure if target is > total it does not always means its memory pressure
BCHR would also give you good idea about memory pressure
If memory grants pending is frequently non zero there is memory pressure
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

How can I make Iphone open in Itunes instead of Iphoto?

how can I make Iphone open in Itunes instead of Iphoto? It never highlites that option when syncing.

http://support.apple.com/kb/HT4627?viewlocale=en_US&locale=en_US
When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. This article describes how to manage these associations.
You must wait the 90 days.

How Can I Make a Membership Website With Adobe Muse? Like Youtube, Facebook, Twitter.

How Can I Make a Membership Website With Adobe Muse? Like Youtube, Facebook, Twitter. I need help!

Yeah me too

How to attach database in sql server 2005 restricted mode

hi i have a database i want once i have attach database in sql server 2005, anyone cannot do detach, script and delete my database except myself. I mean i want to secure my database to avoid unauthorized persons access
how it is possible in sql server 2005 express management studio

There are restrictions for normal Logins but a administrator in SQL server can always detach,script and delete your database.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

How to connect captivate file in a database (MS SQL SERVER 2008)

Hi...
How to connect captivate file in a database (MS SQL SERVER 2008) ???
Kindly response please..
thanks!!!

Hi there
See if the link below helps you out.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How can I make IPhone 4 "invisible" when Bluetooth is switched on?

How can I make my Iphone 4 invisible when Bluetooth is switched on???
Peter

If your phone is not jailbroken, they will not be able to connect to it. It will not be discoverable unless you go into the bluetooth settings page on the phone, which makes it discoverable. If people are attempting to connect to it, I'll lay odds that FAST&FURIOUS is correct in his guess that your phone is jailbroken. If that's the case, all bets are off. Jailbreaking compromises the security of your device as well as rendering the warranty void.

How to attached a sql server 2008 database on sql server 2005

Hi,
I have a backup of database designed over sql server 2008. I need to attacched this on a machine where sql server 2005 is installed and I am getting the message while attaching the database.
"The database can not be opened because it is version 661.
the server supports version 611 and earlier"

You need to install/have another instance of SQL Server 2008, restore over there the database and perhaps create a SSIS package to move objects and data into SQL Server 2005
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to completely clean previous Primavera P6 and OracleXE ,SQL server 2005 for fresh new re installation

Hi
I am using XP SP3 and I had previous successful installation for Primavera P6 8.3 with samples in the past, until my hard drive gave a message that’s its almost full, I tried to move the database to D:\ but I was stuck and lost connection with data base, I made uninstall for Primavera from add remove programs then made "Deinstalling Oracle Database XE" and followed all steps in the article http://docs.oracle.com/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHDDHJD
to clean the registry and all traces of the old installation, and uninstalled Microsoft SQL server 2005 with all components,
When I re installed Primavera with sample projects everything was ok until the mid of oracleXE installation I had an error message , I run Primavera P6 8.3 setup again and chose to repair installation , this time gave me installation finished.
When I run Primavera I am not able to connect to Database, even traces of old installation like Alias names which was previously used exists .
When I connect to database through web home page I can log in as “system” but it has only HR in it, and users are 12 internal and 1 HR with no ADMPRM$PM.
I don’t think that sample projects are downloaded,
How to reconnect with database and install the Primavera sample projects. or even to clean all traces for the Primavera and data base oracleXE then make fresh re install , Thanks. Zeyad

Hi
I am using XP SP3 and I had previous successful installation for Primavera P6 8.3 with samples in the past, until my hard drive gave a message that’s its almost full, I tried to move the database to D:\ but I was stuck and lost connection with data base, I made uninstall for Primavera from add remove programs then made "Deinstalling Oracle Database XE" and followed all steps in the article http://docs.oracle.com/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHDDHJD
to clean the registry and all traces of the old installation, and uninstalled Microsoft SQL server 2005 with all components,
When I re installed Primavera with sample projects everything was ok until the mid of oracleXE installation I had an error message , I run Primavera P6 8.3 setup again and chose to repair installation , this time gave me installation finished.
When I run Primavera I am not able to connect to Database, even traces of old installation like Alias names which was previously used exists .
When I connect to database through web home page I can log in as “system” but it has only HR in it, and users are 12 internal and 1 HR with no ADMPRM$PM.
I don’t think that sample projects are downloaded,
How to reconnect with database and install the Primavera sample projects. or even to clean all traces for the Primavera and data base oracleXE then make fresh re install , Thanks. Zeyad

Cannot connect to Oracle 11gR2 database from SQL Server 2005

Both SQL Server (Windows) and Oracle (Linux) are in 64bit environments.
I have done the following on a Windows 2008 R2 with SQL Server 2005:
Install InstantClient from Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (x64) to C:\Oracle
Install oledb from 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 by executing install.bat oledb c:\oracle odac
Note: Not sure whether 11.2.0.2.1 version of ODAC will cause any problem since I cannot find 11.2.0.1.0 version.
I have checked the Allow inprocess of OraOLEDB.Oracle provider in SSMS.
I have executed sp_addlinkedserver @server = 'ORACLE_TEST', @srvproduct = 'Oracle', @provider = 'OraOLEDB.Oracle', @datasrc = '##.##.##.##:1521/TEST'
The ##.##.##.## is the ip address of the Linux server which has the Oracle 11gR2 database TEST.
I have executed sp_addlinkedsrvlogin @rmtsrvname = 'ORACLE_TEST', @useself = 'FALSE', @rmtuser = 'xxxx', @rmtpassword = 'yyyy'
The xxxx is the oracle username and yyyy is the password for the oracle user xxxx.
I know the oracle database TEST is up since I have setup connection in Oracle SQL Developer having:
##.##.##.## as the hostname
1521 as the Port
xxxx as the username
yyyy as the password
TEST as the service name
When I click Test Connection for the linked server ORACLE_TEST in SSMS, it just hang.
When I issue a query like select count(*) from oracle_test..xxxx.table1, it just run forever. I'm not so sure how to query an oracle table. I have also tried select count(*) from oracle_test.xxxx.xxxx.table1.
When I retype the password in the Linked Server Properties, it just run forever.
Do I need to create a tnsnames.ora on the Windows machine?
Do I need to change the tnsnames.ora on Linux machine?
I'm very new to Oracle.

This forum is dealing with connections from an Oracle database to SQL Server - so the Oracle database is the driving site and this is the way round from your linked server set up.
As you're suing the instant client you might post your issue in the instant client forum:
Instant Client

Issue in rebuilding index after restoring database from sql server 2005 to 2012

Hi All,
We have recently restored a database named DBA_admin from our sql server 2005 instance to sql server 2012 and we have added the database to out weekly maintenance plan. After adding the database to maintenance plan the job is failing every weekend due to
below error message.
Error message from maintenance plan history:
Executing the query "ALTER INDEX [PK_lsttype] ON [dbo].[lstAssign..." failed with the following error: "Invalid object name 'admin.dbo.databaselog'.
ALTER_INDEX - dbo.PK_lsttype". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Below is the code within the maintenance plan which the rebuild index task is using for database dba_admin:
USE [dba_admin]
GO
ALTER INDEX [PK_lstType] ON [dbo].[lstType] REBUILD PARTITION = ALL WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 98, DATA_COMPRESSION = PAGE)
Please let me know if any one knows how to fix this issue.
Thanks in Advance.

Sorry for the confusion.
Here is what is happening.
The query is failing while trying to rebuild index [Pk_lsttype] on table [lstAssign], both these objects belong to database
admin.
I have verified the old instance there is table databaselog within the database
dba_admin, but in new SQL instance within the database dba_admin the table is not present.
Even I'm not sure of what this table databaselog has to do with rebuilding indexes on table
lstAssign within the admin database.
I have manually tried to execute the alter index command within the database
admin and it is failing with the below error.
ALTER_TABLE - dbo.Query_pnb_sms
Msg 208, Level 16, State 1, Procedure ddlDatabaseTriggerLog, Line 39
Invalid object name 'dba_admin.dbo.databaselog'.

How can i make network between two databases ?

Good Morning to all ;
Going to configure oracle 10g - ( I trying to exchange data between two different databases.
Each database is configured in different operating systems.
For ex : one database from windows XP(seperate virtual machinne)
one database from linux rhel (seperate virtual machinne)
I am waiting for some suggestions ..
Thanks ..
Edited by: 969352 on Mar 19, 2013 10:04 AM

969352 wrote:
What virtualization product are you using?*#* vmware-toolbox-cmd -v
8.1.3.9911 (build-203739)
VMWARE Product Information :
Version : 7.0.0 build - 203739
OK. You will need to make sure the ip addresses you assign to your vms are in the same subnet as the adapter create by the installation of vmware. Once you get the fundamental network setup fixed, you can treat these vms just like any machine in your data center. Forget the vm console and access them exactly like you would any remote server -- putty for the linux machine and Windows Remote Desktop for the Windows machine.
At a command prompt on the host, issue this:
c:> ipconfig -allYou will get back info on several net adapters, two of which are identified as being with vmware -- vmNet1 and vmNet8. Note the IP addresses of both. We'll need it later.
You will also need to know how you configured the network adapters on your vm's -- NAT, bridged, hostonly, ???
Note that these issues are out of scope for this forum. I don't mind helping, but I no longer have a vmware installation to reference details.
What have you actually tried to do? ( Data Transfer )I tried to exchange data from windows database to linux DB
That's pretty vague. Exactly how did you try to "exchange data"? A sql statement using a db_link? export/import? Carrier Pigeon?
>
Where are you stuck?
I don't know , how to configure ip and necessary information for windows database.
Configuring an IP address is purely an OS admin issue and is out of scope for this database forum.
Google is your friend, but only if you use it: [url http://lmgtfy.com/?q=configure+windows+ip+address]http://lmgtfy.com/?q=configure+windows+ip+address
>
That's it Edstevens .. thanks ..

How can I make iPhone 4 with 6.0.1 manually sync calendars with 10.8.6 computer?? It worked perfectly with iPhone 6.0.

I am not prepared to install Mountain Lion yet, so I'm running 10.8.6 on my MacBook Pro and can't use iCloud. So I've been syncing my calendars manually with my iPhone 4. But after upgrading the iPhone to 6.0.1 yesterday, they wouldn't sync. How can I: (a) make this work between 10.8.6 and 6.0.1, or (b) revert to 6.0, or (c) is there another solution? Thanks for any help.

Currently downloading upgrades from the "Software Updates" so hopefully that will help,
Which updates are these? For iPhoto or for you phone's operating system?
If you plan on upgrading iPhoto it will require a purchase of the iLife 11 disk from a 3rd party retailer like Amazon.com
or
upgrading your MBP to Mavericks and downloading the latest version, 9.5, from the App Store for free.
OT

How can i make a mobile me account ?

how can i update my os x 10.6.8 to the latest and newest os x ?

Hello Besho Hussain,
Thank you for using Apple Support Communities!
MobileMe has moved to iCloud so you cannot make a MobileMe account anymore. You can however make an iCloud account.
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/ht4436
All the best,
Sterling

How can I make MFE delete the mails from the serve...

guys,I am using mfe on my E63 with mail2web free account.I configured gmail to retrieve my hotmail mails then I configured gmail to forward my mails to my mail2web account.I did that so I dont have to have more than one mailbox on my phone and to be able to check my all accounts from one account which is mail2web via mfe.but my problim is when I delete an email via mfe from my phone its not been deleted from mail2web servers.I mean when I login on pc I see all the mails that I have been deleted.can I make the phone to also delete the mails from the server? thanx
my blog on the net(in arabic):http://bazkurd.wordpress.com

WaMuHIP07 wrote:
Right-click the videos that you want to always start from the beginning in iTunes. The options tab of the video file properties contains this option control. Uncheck the box that says "Remember Play Postion."
Or hit the left side of your scroll wheel when launching it on your iPod

How can i make iphone mobile website, database in Sql Server 2005 ?

Similar Messages

Maybe you are looking for