How can I package a SW?

I'm now developing SVR 4 package of GNU SW on Intel Solaris 8. I want to use Class "none" in the same way of Solaris 8 Companion CD - They have zipped file "none" in archive directory and class action script "i.none" in install directory.
I'd like to know the key technique of distributing SVR 4 package in the compressed format.
Any kind of experience you had will be helpful to me.
Thanks
[email protected]

Make it a snippet. You will have to insert from the Snippets panel.

Similar Messages

How can I package the map utility for the cannon 6d for someone to view?

How can I package the "map utility" program from the canon 6D for someone to view the shot locations and shots?

I may understand your point wrong but if you turn on GPS on the 6D, your client can view your photo location easily. Site like Flickr supports GPS (if you don't remove it) or software like Picasa, Geotag, Geosetter, Lightroom, etc.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

How can I package my apps

Hello
          I have "n" applications that uses common classes.
          For example :
          Application 1
          servlet 1
          jsp page 1
          jsp page 2
          bean 1 <----- its common
          bean 2
          ejb 1
          Application 2
          servlet 2
          jsp page 3
          bean 1 <----- its common
          ejb 2
          How can I package this application.
          When I put "bean 1" in each war application, the ClassCastException appears.
          Thanks in advance


java.lang.ClassLoader is the abstract base class.
          WebLogic docs mention ClassLoader issues in several places; I would suggest
          searching on "ClassLoader".
          Cameron Purdy
          [email protected]
          http://www.tangosol.com
          WebLogic Consulting Available
          "Jin Group" <[email protected]> wrote in message
          news:[email protected]...
          > Hi
          > When I said "common definition class" it means that both application
          import
          > the same class for private use.
          > But, these applications don't have relation.
          >
          > Do you know where ca I find more information about loaders ?
          >
          > Thanks
          >
          > Cameron Purdy <[email protected]> escribió en el mensaje de noticias
          > [email protected]...
          > > Your answer did not provide the information I needed to help ;-)
          > >
          > > You need to determine whether the problem is the presence of the class
          due
          > > to its being exported by the EJB class loader. Try running just App 1
          > > (delete App 2 from the WL). Then with just App 2 (delete App 1 from the
          > > WL). Does that work?
          > >
          > > Do any of your EJB home and remote interfaces take or return that class
          > type
          > > as a parameter/return value?
          > >
          > > --
          > >
          > > Cameron Purdy
          > > [email protected]
          > > http://www.tangosol.com
          > > WebLogic Consulting Available
          > >
          > >
          > > "Jin Group" <[email protected]> wrote in message
          > > news:[email protected]...
          > > > Hi
          > > > In my example , "Bean 1" is a common class at definition level.
          > > > There is no relation between applications.
          > > >
          > > >
          > > > Cameron Purdy <[email protected]> escribió en el mensaje de noticias
          > > > [email protected]...
          > > > > Do you pass objects between applications? Are the applications at
          all
          > > > > related? Do your ejbs take as parameters or return objects of that
          > > type?
          > > > > I'm just trying to figure out how the class got "exported".
          > > > >
          > > > > --
          > > > >
          > > > > Cameron Purdy
          > > > > [email protected]
          > > > > http://www.tangosol.com
          > > > > WebLogic Consulting Available
          > > > >
          > > > >
          > > > > "Jin Group" <[email protected]> wrote in message
          > > > > news:[email protected]...
          > > > > > Hello
          > > > > > I have "n" applications that uses common classes.
          > > > > > For example :
          > > > > >
          > > > > > Application 1
          > > > > >
          > > > > > servlet 1
          > > > > > jsp page 1
          > > > > > jsp page 2
          > > > > > bean 1 <----- its common
          > > > > > bean 2
          > > > > > ejb 1
          > > > > >
          > > > > > Application 2
          > > > > > servlet 2
          > > > > > jsp page 3
          > > > > > bean 1 <----- its common
          > > > > > ejb 2
          > > > > >
          > > > > > How can I package this application.
          > > > > > When I put "bean 1" in each war application, the
          ClassCastException
          > > > > appears.
          > > > > >
          > > > > > Thanks in advance
          > > > > >
          > > > > >
          > > > >
          > > > >
          > > >
          > > >
          > >
          > >
          >
          >

How can Imported Package of components to be fully editable??

hi people,
with JDeveloper TP3
How To Import a Package of components that are editable and display in the
Application Navigator
Fusion Developer’s Guide for Oracle Application Development 11g
Chapter 35.7 Working with Libraries of Reusable Business Components
Says:
Tip: If you require components that are editable and display in the
Application Navigator. Add additional business components from a
directory that is not currently part of your project's source path, then
open the Project Content page of the Project Properties dialog and
add the parent directory for these other components as one of the
directories in the Java Content list. In contrast to imported packages
of components, additional components added to your project's source
path will be fully editable and will appear in the Application
Navigator.
but i can't even change Control hints.
with JDeveloper TP3
How To Import a Package of components that are editable and display in the
Application Navigator
Fusion Developer’s Guide for Oracle Application Development 11g
Chapter 35.7 Working with Libraries of Reusable Business Components
say:
To create the JAR files, in the Application Navigator right-click the Business
Components project folder and choose Deploy and the ReusableComponents
profile. A Deployment tab appears in the JDeveloper Log window that should display
feedback like:
---- Deployment started. ---- Apr 28, 2007 7:04:02 PM
Running dependency analysis...
Wrote JAR file to ...\ReuseableComponents\deploy\ReuseableComponentsCSMT.jar
Running dependency analysis...
Wrote JAR file to ...\ReuseableComponents\deploy\ReuseableComponentsCSCommon.jar
Elapsed time for deployment: less than one second
---- Deployment finished. ---- Apr 28, 2007 7:04:02 PM
then If you require components that are editable and display in the
Application Navigator Add additional business components from a
directory that is not currently part of your project's source path, then
open the Project Content page of the Project Properties dialog and
add the parent directory for these other components as one of the
directories in the Java Content list
where i didn't find Project Content page of the Project Properties
but i got
Compiling...
Context: selection=rootBusiness.jpr project=rootBusiness.jpr node=rootBusiness.jpr
Validating Business Component: rootbusiness.rootBusiness
copying rootbusiness/rootBusiness.jpx to output directory
Validating Business Component: rootbusiness.entity.Dept
copying rootbusiness/entity/Dept.xml to output directory
Validating Business Component: rootbusiness.entity.Emp
copying rootbusiness/entity/Emp.xml to output directory
Validating Business Component: rootbusiness.entity.FkDeptnoAssoc
copying rootbusiness/entity/FkDeptnoAssoc.xml to output directory
Validating Business Component: rootbusiness.Service.rootAppModule
copying rootbusiness/Service/rootAppModule.xml to output directory
Validating Business Component: rootbusiness.view.DeptView
copying rootbusiness/view/DeptView.xml to output directory
Validating Business Component: rootbusiness.view.EmpView
copying rootbusiness/view/EmpView.xml to output directory
Validating Business Component: rootbusiness.view.FkDeptnoLink
copying rootbusiness/view/FkDeptnoLink.xml to output directory
copying rootbusiness/Service/common/bc4j.xcfg to output directory
Updated file:/C:/JDeveloper/mywork/Root/rootBusiness/classes/META-INF/adfm.xml
[10:16:25 ص] Successful compilation: 0 errors, 0 warnings
and didn't find ReuseableComponentsCSMT.jar or ReuseableComponentsCSCommon.jar
thanks
Message was edited by:
greenApple

with JDeveloper TP3
How To Import a Package of components that are editable and display in the
Application Navigator
Fusion Developer’s Guide for Oracle Application Development 11g
Chapter 35.7 Working with Libraries of Reusable Business Components
Says:
Tip: If you require components that are editable and display in the
Application Navigator. Add additional business components from a
directory that is not currently part of your project's source path, then
open the Project Content page of the Project Properties dialog and
add the parent directory for these other components as one of the
directories in the Java Content list. In contrast to imported packages
of components, additional components added to your project's source
path will be fully editable and will appear in the Application
Navigator.
but i can't even change Control hints.

How can I package a custom block of HTML code to be inserted by clicking the insert panel

Is there a way to package custom HTML code such as
<figure>
<img src="" alt="" />
<figcaption>
Caption
</figcaption>
</figure>
so that I can click a button on the insert panel and insert this code?

Make it a snippet. You will have to insert from the Snippets panel.

How can I package my InDesign file without converting the images to CMYK?

I had previously thought I have to convert each link individually, but I have received packaged files that include both RGB and CMYK images, but when I try to package my document, it is saying that I have errors on all the RGB images. Are there settings that allow me to package the links without conversion? I know how to export it with a one-time conversion, but I cannot find the answer to this question anywhere.

Thank you for helping! I must be doing something else wrong then because it will stop packaging as soon as it tries to get the links... and will gather a few and then stop. The warning message is "could not copy linked files" but I don't have any warning signs on any of my links in the links panel...

How can i package my project to exe

dear members
my project is composed of 30 fmx file in addition to
60 rdf file
my question is
is it possible to make my project executable package (setup file that runs under winows98 or xp)
and how?

Use the free Burn
http://www.bestmacsoftware.org/

Applet or web-start? How can I package a memory intensive app?

Dear All,
I'm new here - I'm learning about Java with a particular project in mind, and looking for advice from people with more experience before I start coding! Your opinions would be very useful.
I would like to write a small scientific application, to be distributed by the web, easy to run as a normal user (without administrator rights), with a good GUI. So Java sounds very good for this. However, the application will be very memory intensive (and quite CPU intensive) with several large arrays. It may require ~1 to 2 Gb of memory at times. I have three simple questions:
1) If I write it as an applet, will my users hit memory 'heap size' limits when they try and run it if it tries to use ~1 Gb memory? Can I control this?
2) If I write it using JNLP (e.g. Sun's Java Web-Start), will my users get memory limit errors if my application tries to use ~1 Gb memory? Can I control this?
3) If more and more people start using the Java browser plugin, will they get Web-Start installed at the same time? Or will Web-start become less common?
Any other advice about this choice, problems with web-start or resource hungry applets would also be gratefully received.
With thanks and best regards,
andy_g
(PS: I'm not worried about the performance of Java compared to other languages - I'm worried about hitting memory limits imposed by the JVM settings or Java language!)

Hi ChuckBing,
Thanks for your reply - it's given me some valuable information. In light of your post I think I'm going to try a very simple test code which does some simple operations with representative big arrays and see if I can get that working well on a range of machines before I spend time writing the real thing. I hadn't appreciated the need for contiguous memory in the Java heap.
As for comparing JNLP and applet memory control, after another intensive bout of google searching, I found more information about controlling heap size for applets at:
https://jdk6.dev.java.net/plugin2/jnlp/
From my (novice) reading of this page, it seems that from 1.6 you can now control the heap available to an applet in a similar manner to JNLP. I've added this link in case other people stumble across this post with a similar questions about applet memory limits.
Thanks again,
andy_g

How can I package an HTML5 panel from the command line?

I am able to use the Eclipse Extension Builder plugin to export a ZXP file, but for our build process we will need to do this from the command line. Is this possible?

Edit: Adobe has fixed the links and the downloads are now available.
The links to the Windows downloads do not seem to be active anymore. Is there somewhere else we can get these?
http://labs.adobe.com/downloads/extensionbuilder3.html

NetBeans 5.5. + layout - how can I make a jar?

1. I try to build my application.
2. I've developed it in NetBeans 5.5
3. I ve used form as a base for my GUI
4. I've made application with help of GUIBuilder+some swing components I create dynamically during program execution.
The problem:
I can't make runnable JAR.
When I try to launch project.jar form folder /dist I get message:
"No main class found"
I need to have these jars (they are in my project's library section:
1.swing-layout-1.0.1.jar
2. AbsoluteLayout.jar
I found a solution:
How can I package the swing-layout-version.jar library
into my application JAR?
Having developed your Swing application in Matisse (using the "Free Design" layout) you can
package the required swing-layout-version.jar library inside your application JAR file.
Requirements:
● Standard Java project
● Swing Layout Extensions library included in your project's classpath
Open your project's build.xml from the Files tab and insert this:
<target name="-post-jar">
<jar update="true" destfile="${dist.jar}">
<zipfileset src="${libs.swing-layout.classpath}"/>
</jar>
</target>
Just press F11 to build your project as usual. This Ant target will bundle swing-layout.jar
inside your distribution JAR file.
You can adapt this Ant target to different requirements.
So I've inserted this code into my build.xml
Size of built project jar file increased.
I try to lauch it and I get no message. Nothing happens.
What else I have to do if I want to get distributable jar....?

So I found a problem.
Jar with main class created using GUIBuilder (NetBeans) doesn't launch.
I use netbeans 5.5. + jdk 1.6.
If I launch jar with frame-based main class - everything works.
If I try to launch form-based main class - it doesn't work.
I do not get any error message or something like that.
What it can be?

I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file. I have run a number of searches and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps. The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members. I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

My apologies Eadeszoo I believe our support agents are unavailable on January 1.
Are you able to copy the contents of the DVD to your computer? Are you receiving any particular error messages when you are trying to install? Finally which operating system are you using?

How Can I get all the values of a DBMS package?

Hi all
I'm using this "dbms_output.put_line(DBMS_DB_VERSION.VERSION || '.' ||DBMS_DB_VERSION.RELEASE);" to show the version. But how Can I get the all the values from DBMS_DB_VERSION ? Is there a common way ?
Thanks .
Best
Laurence

Hi,
Don't think that's possible. Even if it were, you wouldn't be able to use/display BOOLEAN type in SQL.
If you just aim to see what they are, you could do something like this
select text
from all_source
where owner = 'SYS'
   and name = 'DBMS_DB_VERSION'
   and type = 'PACKAGE';Or even
select dbms_metadata.get_ddl('PACKAGE', 'DBMS_DB_VERSION', 'SYS') from dual;My version is:
SQL> select * from v$version where rownum = 1;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
1 row selectedIn 11g you also have [PL/SCOPE|http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10471/adfns_plscope.htm#ADFNS02203] which might help you even more.
Regards
Peter

How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?

How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?
< Edited by Host >

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

How can we assign sproxy generated objects to a different package?

Hello Expert,
We need to change the package assigment of sproxy generated DDIC objects. How can we assign sproxy generated objects to a different package?
Regards,
Thulasi

Any idea?

How can i disply the error in my forms which occurs from plsql package

Dear all
i am using 10g forms.
i have a package and in the pkg i am reading data from flat file using UTL_FILE and comparing with what user input in the form .
If that does not match then it is raising errors . but how can i display those errors in my forms .
Let say in my PKG The error is "Account no does not match " . this error message i wnat to show in my Forms .
For the error i have created one block :error.err_dtl.
I want to show here in :error.err_dtl.

Hello,
Several solutions:
You can write a procedure or a function in that package that returns a Boolean and/or an error message.
You can also, in your package, raise the RAISE_APPLICATION_ERROR(), then trap this error in the Forms calling code, via the DBMS_ERROR_CODE and DBMS_ERROR_TEXT variables.
Francois

How can I package a SW?

Similar Messages

Maybe you are looking for