How can I perform a silent install of an application AND use "run executable after installation"

I am trying to do a silent install of a program I built using LabVIEW 8.5. I also need to call an exe after the installation, so I am using the "run executable after installation" option on the Advanced tab of the installer. I then pass the following command lines to the setup.exe:
/qb /acceptlicenses yes /r
This installs the LabVIEW program successfully, but does not then run the additional exe afterward. If I run the setup.exe normally (with no command line parameters), the additional exe gets run.
Thanks,
Jason

jmburns wrote:
I am trying to do a silent install of a program I built using LabVIEW 8.5. I also need to call an exe after the installation, so I am using the "run executable after installation" option on the Advanced tab of the installer. I then pass the following command lines to the setup.exe:
/qb /acceptlicenses yes /r
This installs the LabVIEW program successfully, but does not then run the additional exe afterward. If I run the setup.exe normally (with no command line parameters), the additional exe gets run.
Thanks,
Jason
This problem is fixed in a future release of LabVIEW. Here's the CAR ID 67549 for tracking purposes.
Message Edited by Bob P on 07-10-2008 09:10 AM

Similar Messages

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

How can you change the font size in the application and system headers?

How can you change the font size in the application and system headers? I searched the system and finder prefs to no avail. Changing the screen density is not a good option.
Thanks

I downloaded Tinkertool. Found the font section and increased the size of most selections. The only thing that changed that I can see is the window label. The apple line, bookmarks line, the tool bar in safari are all the same---font size of about 4. Found the finder "show view options" but that didn't seem to change anything either. I'll keep working. Restarted all apps after changes as well.

How to run executable after installation?

Hi everyone,
I created an installer from one labview program with the application builder
of Labview7.1 for my customer, and this installer will be burned
on a CD. There are several configuration files which should be always
modified, so I want to give the customer a possibility that he can
change them by himself without creation of a new installer , I think the
"run executable after installation" is the way to do it, but I don't know
how to implement such an executable command to copy some files from CD to
the destination directory which the program should be installed, could
anyone give me some tips? Thans a lot!
Le

When you setup your build file, add the files using SourceFile Tab>>add support files, then click on custom destination, here you can add support files during installation. Hope this is what you are looking for.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

How can I do a silent install of Firefox 23 since the -ms switch doesn't work?

I have been able to do a silent install of all the previous versions of Firefox using the -ms switch. But when I use it on the new version, the user interface comes up and it never did that before. I have tried different silent switches but non of them worked.

Not the most experienced at this but are you using the stub installer, maybe you can try the classic installer and try again?
Hopefully this helps.
* https://www.mozilla.org/en-US/firefox/all/ <= Full installer

Client can not connect to Server installed window server 2008 and using 8.8

HI all!
I have a problem when Client log in to server that installed window server 2008.It can not connect to this server even when restart and key in IP or Server name,...
I try disable Firewall of window 2008 in server machine and client can connect to server. But when i disable firewall, it's mean i can not use Remote desktop or terminal service..
Now, how i can do in order to solve this problem.
Thanks!

Hi,
Take a look at the admin guide (Page 75, 119, 159):
[http://service.sap.com/~sapidb/011000358700000150922010E.zip]
If you installed a firewall on the license service computer, make sure that the firewall is not set to port 30000; otherwise, the license service cannot work.
If you are using Port X, make sure that you open Port X and Port (X+1) in the firewall. For example, if you are using port 10000, make sure to also open port 10001.
The default communication port is 1143.
The default port of the SAP Business One license server is 30000 for license communication and 30001 for the license naming service

How can i active my iphones with one app id and using find my iphone apps

hi
i want to register 2 iphones with one app id ,and using find my iphone apps in my iphones ,
how can i do it ?
please help me

this will not work for "find my iPhone". It is always a good idea to have two seperate Apple ID's anyway

When trying to watch a movie via apple tv how can you stop it having to download each time and using up all my internet data?

I have bought movies from itunes and now they are on my computer why is it that each time I try to watch the movie it re downloads and uses up all my internet data? How do I prevent this and make it so it just plays from my stored version on my computer hard drive? Please help.

Welcome to the Apple Community.
Watch it from Computers > movies and not movies > purchased.

How can i performe a clean wipe of my system and reinstall osxlion ?

Hii i have a macbook pro which i bought in late 2011. I was wondering how i should do a comeplete wipe of all my memory and reinstall lion. I have tried the recovery process but it just reintalls the os and leaves the rest of the data behind.

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Can I do a clean install of 10.5 and use migration assistant from backup ?

I want to install OS 10.5 on to my Macbook. If I do a clean install rather than an archive and install can I then use migration assistant to transfer my accounts and emails from the cloned Superduper backup I have made on an external drive?
Or is Archive and Install better?

I think 99.9% of the people know what you want to do by "clean" (ie, erase or reformat) and that insures there aren't any file or directory problems when you start, that the new OS is all that will be taking up space. Clean has two connotations: Windows or OS 9. There are lots of words that are "no longer used" but everyone knows what "initialize" or reformat means and does.
If you said, "Scratch that" you could mean, "scratch that idea" even though you can't actually scratch anything. And the idea isn't in stone (scratch out) or written with a pencil where you could erase the word or line. Or draw a line through words to "scratch out the line." There can be multiple meanings. Some languages have 5 words for "blue" to denote different shades of blue, and meaning.
Your drive is 60GB which is on the small side so that is one more reason to reformat.
And because installers will create and delete a lot of files, and scatter around, I would do another SD backup (and leave your old backup as is) so you have a copy of Leopard you can boot from and that would be just Apple OS (maybe after applying the 900MB of updates required to get to 10.5.4+).
Migration Assistant has posed some problems for some with how account data is imported into a new group account. Check out http://www.macfixit.com

How can I select 5-star photos in one catalog and use them to create a new catalog

I've been using Lightroom since LR1. I now have several LR 5.5 catalogs generally organized by year and camera. I want to create a new catalog which will contain my best from each catalog. BUT, I don't want to remove the photos from their "home" catalog. The photos will continue to reside in both their original catalog and in the new "Portfolio" catalog. The easiest way to approach this is to filter photos in catalog "A" by rating, select all 5-star photos and create a new catalog containing just the selection. I don't want to export or remove them from their catalog or move them on disk. I want them to appear in BOTH catalogs. Since Lightroom is built on a database that merely points to image files, it seems like this should be possible.
I realize I can create an empty catalog and select File->Import from Another Catalog... , then locate the photos one at a time by name and location clicking the import checkbox - tedious is an understatement when you have several 10's of thousands of photos.
Any ideas?

jimfeet wrote:
Yes, that's an option I've considered. But as with any database, size is inversely proportional to speed - larger database equals slower performance. LR 5 is much better than earlier versions in this regard but when you reach 100,000 images you can feel it.
This is incorrect. I accept that you think the database is getting slower, but the database (and really all databases) are designed to work pretty much the same regardless of the number of records, except for perhaps searching through the entire catalog. We have seen in this forum people who are now editing larger RAW files than a few years ago, they see it is slower, and decide it is the size of the database, rather than the size of their photos.
What aspects of Lightroom are slow? If it's scrolling and displaying the previews and searching, then it might be the database. If its displaying images in the Develop module, it is NOT the database at all.
Have you taken steps to improve the performance of the database, such as Optimizing it regularly? have you tried these performance tips: FAQ: Experiencing Performance related problems in Lightroom?

How can I call Adobe Reader from inside my Application and prevent operator to access Open/save opt

Can Anyone help to find a way?
http://answers.acrobatusers.com/How-call-Adobe-Reader-inside-application-avoid-operator-op en-save-doc-q13487.aspx
From inside my application that run on an Automation PC, under Windows O.S, I want to call Adobe Reader using a shell command to open up an PDF Document containing some informations.
Shell command like these
"C:\Program Files\Adobe\Reader 10.0\Reader\AcroRd32.exe" /A "<options>" "C:\mydoc.pdf"
or
cmd /c "C:\mydoc.pdf"
Operator is using a touchscreen.
I want to prevent user to access any option that can give him acces to filesystem (Open/save/save as).
I want also to prevent any change/add information to PDF document
Thank you in advance for the time you will spend for me.

You can use the Installation Tuner for Reader to customize the UI elements provided to the user. Details on the Adobe web site.

Just starting in Photoshop how can access the tools in the most simplist way and use them effective.

How just started using photoshop and wondering how to use it. How to access the tools so I can get started on drawing and painting in it.

Watch online videos and practice doing what they show you.
Keep in mind there is no easy way to learn Photoshop, simply because it's so compex and powerful. But be patient, it will come.
-Noel

How can I move pictures from my Facebook to iPhoto and use them to make products?

I want to put the photos I have on my facebook into my iphoto on my new imac when i do this using iPhoto it says i cant use the pictures to make products such as calenders or books... is their a fix to this?

Try download them from Facebook first - you do this in your Web browser. Then import them to iPhoto.
Regards
TD

How can I reboot my FieldPoint from an embedded application?

How can I reboot my FieldPoint from an embedded application that is running on this FP.

Hello.
I'm writing you about this question you made a long time ago...
Did you solve the problem? I have the same question! So please let me know if you found a solution.
I saw the answer which was given to you, but I doubt that the reboot command would work from an embedded application, because it asks for IP address and MAC, while it is on the machine where the project is running that I want to send the reboot command. Did you try it?
Thanks for the help.
Francesca

How can I perform a silent install of an application AND use "run executable after installation"

Similar Messages

Maybe you are looking for