How can I reallocate sales order stock within sales order?

I have a material that is strategy 50 and produces sales order stock.   A customer placed an order for a quantity to be shipped to a single location.  So the sales order was set up with a single line item and a single ship-to partner.  Just before shipping, the customer now wants the quantity broken into deliveries for 4 different ship-to locations.  The total quantity is the same, but it is now to be spread across 4 ship-to partners.   I thought we could just add 3 more line items to the sales order, set the ship to partners for each of the 4 sales order items to the new ship to locations, and then adjust the quantities to the amount to be shipped to each partner.  But when I do this, ATP does not let me confirm the new order items and confirms the original item with a note that the quantity produced is less than the order quantity.  How can I split this order up into multiple items?  
Thanks in advance.

I was able to resolve the problem yesterday evening.   The solution was to first create a posting change using MB1B with movement 413 E - Sales Order to Sales Order.   Then I did a posting change notice to change the material - the only thing that I changed, however, was the special stock number.   Worked like a charm, but was tough to figure out (I am an SD person, not IM/MM).

Similar Messages

  • How can I change the order of phone numbers in a contact?

    I have contacts that have more than one phone number (I am sure we all have those in this day and age). The importance of the phone numbers varies over time and I want to have the most important one as first on the list. How can I change the order that phone numbers are displayed within a contact?
    Thanks for any help.

    Currently, the order in which the phone numbers appear (in a contact) is dependent on the sequence to which you enter them. There is no way to change that order other than re-entering them in the desired order.

  • How can i reference a MIME object within a correspondence format through...

    how can i reference a MIME object within a correspondence format through TX oofo or se71?
    Hi, I need to put a MIME object within a correspondence's format that i've already done through Tx oofo. My problem is, that i don't know exactly how can i make the reference of that MIME object in the format? and What structure type do i have to use in order to make appear the MIME object in my correspondence's format? Does anybody can help me with this?   
    Regards    Hector

    Frank,
    I tried to find some examples/samples on how to create CollectionModel for a table component but not successful.
    Can you clarify the following ?
    1. "CollectionModel" is referenced only by af:table attributes "value", "selectedRowKeys" and "selectionListener".
    The rest of af:table attributes such as "rows", "fetchSize" used to reference the iterator binding in the binding container via the EL expression "#{bindings.VOIteratorBinding.xxx} .
    What should I replace that EL expression with?
    2. I heck out the bean method to create the CollectionModel as following, is it close to what you mean?
    public void initBusinessDataDashboardView() {
    OperationBinding operation = BeanUtils.getOperationBinding("getPanelBusinessData");
    Map params = operation.getParamsMap();
    Key panelKey = getPanelInfoView().getKey();
    params.put("panelKey", panelKey);
    params.put("maximizedView", false);
    panelView = (ViewObject)operation.execute();
    // Heck code to create CollectionModel
    RowSet rowSet = panelView.getRowSet();
    ArrayList rowList = new ArrayList();
    while (rowSet.hasNext()) {
    rowList.add(rowSet.next());
    model = new ChildPropertyTreeModel(rowList, null);
    // To be used to set up af:table value, selectRowKeys, selectionListener via EL expr #{backingBeanScope.MyBean.model.xxx}
    public CollectionModel getModel() {
    return model;
    Am I on the right track?
    Edited by: Pricilla on May 4, 2010 2:20 PM

  • How can i create slaes order using BAPI

    hi all,
    i didnt work on BAPIS .how can i create sales order using BAPI here i should pass Z values.
    Moderator message : FAQ, search for available information. Thread locked.
    Edited by: Vinod Kumar on Sep 13, 2011 12:22 PM

    Hi!
    There are a lot of answered threads regarding your question. Try searching first. Below is a sample link.
    BAPI_SALESORDER_CREATEFROMDAT2
    Regards,
    Steph
    Edited by: stephquion on Sep 13, 2011 8:25 AM

  • How can I change the order in which songs appear in my iTunes Music Library?

    How can I change the order in which songs appear in my iTunes Music Library?

    Kay,
    If you are looking at the entire music library ("Music") you can sort by any of the columns by clicking the column header.  If there is a column you can't see, enable it by going to View > View Options.
    Within a playlist, you can do the same, and in addition you can click above the column of sequence numbers, which will then allow you to drag tracks up or down to get any order you wish.

  • How can I enable the Special Stock Indicator in the source list?

    Hello Gurus,
    How can I enable the Special Stock Indicator in the source list? This can be found in the Maintain source list detail screen, source group and beside the order unit. Even I am in the create or in change mode, still the indicator can't change
    Thanks!

    OSS note 668764 explains that the special stock indicator field is a display only field and cannot be changed in the source list. it is only taken over from a scheduling agreement.

  • How can I cancel my order for extra ICloud storage space?

    How can I cancel my order for extra ICloud storage space?
    I don't need it afterall...

    Call Apple. 1-800-My-Apple

  • How can I detect a certain text within a field within CASE using IF

    Dear all,
    for a transformation / generation of values receiving from R/3 into BW I try to
    manupulate three fields. I have a problem detecting a string in a field.
    I am using a CASE with several WHEN clauses on one field. Depending on the
    value, an IF is integrated. There I look into another field evaluating, if it contains
    a certain string. E.g. IF STRING CP 'xyz' OR 'abc'.
    System gives error for the locigal expression. I also tried CS, but same error.
    How can I detect a certain text within a field and which is the right logical
    expression.
    Many thanks in advance!!!
    Claudia

    Hi,
    Folow the blow example...
    May be it helps....
    DATA: hex1 TYPE string,
          hex2 TYPE string.
    hex1 = 'FFFF'.
    hex2 = '123FF'.
    IF hex1 CP hex2.
    ENDIF.
    Cheers,
    SImha.

  • How can I start a new paragraph within the same table cell?

    In Numbers, when adding text within a table frame, how can I start a new line within the same frame (rather than advancing to the next cell)?  I'd like to enter a mini-list of several items of various lengths of data.

    While Wayne's answer solves your problem, another possibility is to uncheck the box at the bottom of the Table inspector for "Return key moves to next cell." If that is unchecked, the return key types a paragraph return within the cell (the same as Option Return with the box checked).
    With that box unchecked, Shift Return types a soft return (new line without a paragraph break).

  • How can I create a second sheet within a tab?

    How can I create a second sheet within a tab? I have tried to add another table but it shows up on top of the existing table. I want to have two sheets or tables within one tab so I can further sort and categorize within a section. Is this possible? Thanks for all the help!
    -Bridget Altman
    Administrative Associate
    Discover Abroad at the University of Georgia

    You can insert a new table on the View Responses Tab with
    Insert > Table
    You can also insert a new sheet with a new table with
    Insert > Sheet
    You can drag and drop the table if it does overlap with another table. Just select the table you want to move and drag the top-left corner of the table to move it.
    Hope this helps
    Gen

  • How can I create a sub-folder within my "Documents" folder?

    How can I create a sub-folder within my "Documents" folder? I have many similar documents that I want to group together. This will also un-clutter my Documents folder.

    Also, you can add a New Folder button to the Finder's toolbar by opening Finder, going to the View menu in the menubar, selecting Customize Toolbar..., and dragging the New Folder icon to the toolbar in the Finder window. Then it's just one-click for new folders wherever you want them.

  • UWL Help - How can i create my own task within the Enterprise Portal

    Dear all,
    I am currently working with UWL .
    I have tried the customization and those stuffs associated with UWL , and it is working properly.
    My current issue is , how can create my own task within the Portal ( not using Ad Hoc  Workflow , which is present in Portal) ?.
    If i can create my own task within portal by API or using another method , then How can i add that task link within the drop down box that is present in the Collaboration launch pad and Mytask Workset.?
    Is there any API regarding  UWL (which is useful for creation of custom tasks in Portal using Developer Studio by means of Portal Application Creation) ?
    How can i add that custom task in the drop down ?.
    I have tried the customization of existing UWL.
    I shall be grateful to those who can help me to solve this issue with links regarding the  solution of my problem's.
    with regards
    Kishor Gopinathan

    Hi Kishore,
    I am trying to do the same thing. When i am creating Collaboration Task, it has standard templates in the dropdown like "Single Step" and "Multi-Step" etc., If i want to create my own Custom Task Template and display in that dropdown, how can i do that? Your help is really appreciated.
    Thanks
    Vijay

  • How can I change the order of the photos in a slide show I have created on my iPad mini?

    How can I change the order of the photos I have selected in a slide show on my iPad Mini?

    Currently, the order in which the phone numbers appear (in a contact) is dependent on the sequence to which you enter them. There is no way to change that order other than re-entering them in the desired order.

  • How can I control the order of playback on MuVu Mix (USB 2.

    What determines the order of playback of music files stored on the MuVu Mix (USB 2.0)? How can I control the order?
    Apparently it is not name order. The music titles are prefixed by sequential numbers. But that is not the order that the files play back.
    I tried erasing all contents, then copying the files one by one to the MuVo Mix in the order that I want them to play back (name order). But that is not the order that the files play back.
    By the way, in both case, I removed the ".dat" file first. (I also tried keeping the ".dat" file, to no avail.)

    SSR wrote:
    > on the newer MuVos (which I would have thought included the Mix)
    > it's filename order. Other than that it's hard to know, but it sounds
    > like you ought to contact Support to check.
    I did, and they confirmed (very quickly; kudos!) what you and I both expect: the play order is determined by the alphabetical order of the file names. The mistake was mine. I ass-u-me-d that the MSWin folder "Name ^" order was correct. I did not realize that it is not exactly alphabetical when the file name begins with a number (e.g, the track number). I had renumbered songs from a second CD by simply adding 00 to the track number. Thus, songs and 2 of the first CD are played after songs 08 and 09 of the second CD, as they should alphabetically, even though they appear in the order , 2, 08, 09 in the "Name ^" list. Klunk! Mea cupla!

  • How can I reverse the order of podcasts so I can listen in cronological order

    How can I reverse the order of podcasts so I can listen in cronological order!

    What I did was create a playlist for the podcasts and keep it sorted in reverse date order, which puts the oldest first. To prevent it from automatically playing the next podcast, I actually mark all podcasts as "skip when shuffling", and then play in shuffle mode. I also make sure all my podcasts have a genre of "podcast"; I discovered that if you use media type, the playlist doesn't update correctly on the iPod classic
    So, what I've got is a playlist of the form: (play count = 0) and (genre = podcast), sorted in reverse date order.

Maybe you are looking for

  • HP Officejet 4620 All in One Not Printing Black-BRAND new cartridge

    Hello everyone, I am hoping SOMEONE can help me, as this has taken up hours of time and resulted in plenty of frusteration. I just replaced my black ink cartridge, and not a single drop of black ink will print. I have  genuine cartridges, and cleaned

  • Receiver FTP adapter

    Hi I have a idoc to ftp requirement. How do i ensure couple of things, 1) If the ftp server is down the payload is resent. 2) The delivery is guaranteed. regards Sameer

  • Shipping  cost to multiple vendors

    Dear All, This might be a basic question, if it is basic kindly guide me. Since I am new to logistic Execution module , kindly help me.  I am SD guy. There are three parties involved in individual shipment such as forwarding agent, transporter and cu

  • Probelm in calling ME23N from WebDynpro ABAP application.

    Dear All, My requirement is to call the transaction ME23N by doing some action from WDA application. And I have to pass the Purchase Order Nubmer from this WDA application. This is for your information, For this I have created the Transactional iView

  • Apple Watch Will Not Pair - "Device Locked" Warning

    My iPhone 5S has had terrible battery life over the last few days and I am trying to troubleshoot what if the issue is the Apple Watch. In order to check, I tried un-pairing the Apple Watch from my phone so I could re-pair the watch and see if it hel