How can I set VM parameter in NW developer studio?(not in configtool)

hi all,
where can I set VM parameter in NW developer studio? thanks very much!!!

Hi,
this only makes sense if you test standalone applications! In this case: Run... -- Java Application -- New -- (x)=Arguments -- VM Arguments.
If you want to set the VM parameters for the JVM running NWDS itself: The NWDS icon calls for example <i>C:\Programme\SAP\JDT\eclipse\SapIde.exe -vm "C:\Java\jdk1.4.2\bin\javaw.exe"</i> - try to add the parameters just behind the javaw.exe before the ending ".
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

Similar Messages

How can I set my WebI filters to Null and not Null

Folks,
I have created a report in WebI and now I am to set up some filters as Null and some Not Null.
How can I set my WebI filters to Null and not Null?
Regards,
Bashir Awan

Hi,
As you said you could do it at the report level and also at the universe level.
One more way is to create the filters in the universe levele and add them in thequery filter.
Ex: in the filter you need to write :
Column1 is null and and column 2 is not null etc.
Hope this will help.
If this did't solve your problem then please explain it in detail.
Cheers,
Ravichandra K

How can I download and Install SAP Netweaver Development Studio 7.2

Hi All,
How can I download and Install SAP Netweaver Development Studio 7.2 ?

Hi yozi66,
Thanks for your feedback.
If you have any problems, welcome to ask in TechNet Forum.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How can I set which projects use Proxy Media and not just change every project?

Hi there
I can see how to change ALL projects to use Proxy Media or Original/Optimised Media
in
Preferences>Playback
But I'm switching between projects a lot and I only want to use Proxy Media on one project, so how can I tell FCPX to only use Proxy Media on that ONE project?
Thanks

Perhaps if apple didn't take back prores LT this wouldn't be as much of an issue.
Pores LT was a great compromise between file size and quality. It produced a fine image for most peoples needs and was 30% smaller.
Hopefully it will be returned soon. I can't imagine why it's not already there. Unless they want to charge for it, ... again..
Have you tried capturing as full res, then change prefs back to proxy, open a new project and import the full res files?
In FCP7 the render pref was separate from the capture pref. is that gone too?
If my idea doesn't work, Surely someone will chime in with a creative work around to this.
And hopefully it'll get fixed soon in an update.
Best,
g

How can I set bind parameter as Default Display Value in JHeadstart

Hi,
I am using -
JDeveloper Studio Edition Version 10.1.3.1.0.3984
JHeadstart Release 10.1.3.1.26
Can anybody help me for the following:
I am using a super class of ViewObjectImpl where I am definning a bind parameter (Student ID) using login userid:
if ("p_std_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
bindParam[1] = studentNumber_from_LDAP;
Then I defined p_std_id in Bind Variables tab in VO Editor and used that in Where clause in the SQL Statement tab.
This is working fine.
Now what I want to do is:
I want to put the value of p_std_id as Default Display Value for a field.
Can anybody let me know how I can put the value of p_std_id in JHeadstart Application Definition?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hi Jan and Steven,
Thanks for your reply.
I need to show the default value in the table layout.
Steven, could you please give some more hints about EL Expression?
To obtain the value of p_std_id now and pass it on as bind param, I am using a class extending ViewObjectImpl. Inside that class I am using the following method:
I'd appreciate if you could help for the EL Expression.
Thanks
protected void executeQueryForCollection(Object Object, Object[] bindParams,
int i) {
String userId = ((ApplicationModuleImpl)getApplicationModule()).getUserPrincipalName();
try{
getLdapInfo(userId);
catch(Exception e) {
sLog.debug("executeQueryForCollection: Userid = " + userId);
if (bindParams != null)
for (int j = 0; j < bindParams.length; j++)
Object[] bindParam = (Object[])bindParams[j];
if ("p_user_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_user_id, setting value to " + userId);
bindParam[1] = userId;
if ("p_emp_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_emp_id, setting value to " + employeeNumber_from_LDAP);
bindParam[1] = employeeNumber_from_LDAP;
if ("p_std_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
bindParam[1] = studentNumber_from_LDAP;
super.executeQueryForCollection(Object, bindParams, i);
Thanks
Syed

How can you set up ECCN in Material Master if not using Foreign Trade

After many years, we now have the need to store ECCN codes on our Material Masters. Although I see on the Foreign Trade view of the Material Master under Legal Control what appears to be a way to set this up, the fields are grayed out and do not seem to have an option to add? We use Commodity Codes, and we need to just store the ECCN like we do the Commodity Code. Any ideas?

Hi,
Please check this path.
SPROSales and distribution-Foreign trade/customs---legal control .
Here yiu can define the ECCNS and Legal requirements and license types and their groupings, asign to depature countries etc to see that they get defaulted at MM01 screen salesgeneral plant data.
Regards,

How can I set my mac (and the screen) to not go on sleep mode ?

I just want my mac (and the screen) stay alive for a minimum of 8 to 10 hours, not going in sleep mode (or save screen). Just displaying a web page without doing anything else. In preference system, energy save is all set to «never», but after a while the screen goes to sleep ... ?

You probably have a corrupt .plist file. To fix:
1. Hold down the option key.
2. In the Go menu in the Finder, scroll down to Library
3. In Library, find Preferences
4. In Preferences, find com.apple.systempreferences.plist and drag it to the trash
5. restart
6. you will have to reenter your preferences.
Another option is caffeine: Lighthead - Caffeine

How can i set class path in ubuntu JAVA_HOME ?

how can i set class path in ubuntu <JAVA_HOME>?

Note that on *nix
environment variable names are case sensitive.
Also, you are again being vague; is it [this it|http://java.sun.com/j2se/1.5.0/docs/tooldocs/solaris/javac.html] or [that it|http://java.sun.com/j2se/1.5.0/docs/tooldocs/solaris/java.html]

How can I set up a back up hard drive on airport extreme

I have an external harddrive that was plugged into my airport extreme. Apple seemed to eliminate my abilty to back up wirelessly in one of the updates. How can I set this up again? Does anyone know a way around this?
Thanks,

Ah, I remember those links now. I was thinking something along the lines of:
Never consider any computer a data storage device, rather a data creation ,sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake.
Never backup your data exclusively upon magnetic hard drives or flash storage, nor consider same since magnetic storage degrades over time even under ideal conditions.
Store important data on multiple servers on multiple continents.
Burn important data onto multiple copies of archival DVDs and store same in cool dark fireproof safes, multiple places.
Don’t burn data onto junk DVD’s purchased from consumer level electronics stores. These are not archival long life DVD’s nor reliable, nor trustworthy. Archival DVD blanks such as Taiyo Yuden, rated for 100+ years are what the pros use, these are made by JVC and are professional grade DVD blanks.
Most people have never heard of archival DVDs, however their cost is only 30% more than junk-level DVD blanks which are only rated for 5-10 years. Also the reject rate on the inferior DVD is around 15%, the cost is almost identical between the WORST DVD blanks and the BEST DVD blanks.
Most importantly know that 2 copies of your data is 1, and 1 is none, and 1000 copies stored in one place or building, is also the same as none due to possible fire.
Always consider and expect your computer’s hard drive to completely crash anytime, at all times, and you should keep a cloned and updated hard drive handy at all times to return to immediate productivity and utterly avoid programs and parameter reinstallation. Nothing is quicker than taking out a dead HD and tossing in a new updated cloned HD for getting back to 100% in under 20 mins!
Decentralized Omnipresent Data (D.O.D.)
(something I coined an age ago)
Backing up data to:
Multiple HD in multiple locations
On multiple servers on multiple continents, private and public websites, anonymous data farms. (very easy actually)
Burned onto archival optical and magnetic storage
Have unclassified data possessed by multiple people in multiples places.
When your data becomes both everywhere and nowhere, accessible to all, destructible by none, cannot be collected together or permanently retrieved under any circumstances, you have Decentralized Omnipresent Data (D.O.D.) protection rivaling that of large governments.

How can i set a Title to Parameters(Selection-Screen)?

Hi,
i have a Selection-Screen with two Parameters. Both Parameters should be have an Title.
But how can I set a Title two this Parameters? Is there existing any options????
For example, the Parameters "I_WRBTR" and "I_NBDOCS" needs two Title´s.
Every Parameter must have a title, but how can I realize this???
*I have know only a title for "IWRBTR" but i need also a title for "I_NBDOCS"*_.
DATA: FIELD_BUKRS(10).
SELECTION-SCREEN BEGIN OF SCREEN 0100.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
     SELECT-OPTIONS SEL_BUKR FOR FIELD_BUKRS OBLIGATORY.
     SELECTION-SCREEN BEGIN OF LINE, COMMENT (25) text-005 FOR FIELD IWRBTR_, POSITION 33.
         PARAMETERS: I_WRBTR(10),
                                  I_NBDOCS(3).
     SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN END OF SCREEN 0100.
Thanks for Helps.
ETN

Hi,
try this short example:
DATA: FIELD_BUKRS(10).
SELECTION-SCREEN BEGIN OF BLOCK BLOCK WITH FRAME TITLE T_BLOCK.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK1 WITH FRAME TITLE T_BLOCK1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (29) T_SEL_BU.
SELECT-OPTIONS SEL_BUKR FOR FIELD_BUKRS OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BLOCK1.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK2 WITH FRAME TITLE T_BLOCK2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (32) T_WRBTR.
PARAMETERS: I_WRBTR(10).
SELECTION-SCREEN COMMENT 50(15) T_NBDOCS.
PARAMETERS: I_NBDOCS(3).
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BLOCK2.
SELECTION-SCREEN END OF BLOCK BLOCK.
INITIALIZATION.
T_BLOCK = 'parameter'.
T_BLOCK1 = '1. parameter'.
T_BLOCK2 = '2. parameter'.
T_SEL_BU = 'Buchungskreis'.
T_WRBTR = 'Parameter wrbtr'.
T_NBDOCS = 'Parameter nbdocs'.
Regards, Dieter

How can I set VM parameters except Xms and Xmx?

I can set the Xms and Xmx as the following:
<j2se version="1.4+" initial-heap-size="80m" max-heap-size="80m"/>
but how can I set other VM parameter such as Xmn,XX:SurvivorRatio,and some which to special JVM(for example:JRockit)?

There is a whole list ov vm-args considered "safe" by java web start listed in the developers guide at:
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/syntax.html#resources
these can be set with the new arg to the j2se element, vm-args like this:
<j2se version="1.5.0+" java-vm-args="-esa -Xnoclassgc"/>
/Andy

Can you please tell me how can i change the parameter of Applet using Aspec

Respect Members
Can we apply Aspectwerkz on Applet? In our project we have to
change the method parameters before its execution(Around Advice) , can we do this in applet using Aspectwerkz?
Can you please tell me how can i change the parameter of Applet using Aspectwerkz or AspectJ ?
I did it by for Java Application using the AspectJ And Aspectwerkz But not able to do for Applet.
For Applet I Am setting the parameter in JAVA plug in for Aspectwerkz e.g. -Xdebug -Xrunaspectwerkz -Xbootclasspath & path for xml file in which pointcut is defined.
If you any Friend working on it or any author who might be helpfull for me please Forward this mail to him/her
THANKs in Advance
[email protected]

hello rodale, what you're seeing is probably a side effect of firefox not being able to save certain preferences into its profile folder.
go to ''firefox > help > troubleshooting information'', click on ''profile folder/show folder'' and close all firefox windows afterwards. a windows explorer window should open up - in there delete the file named '''user.js'''.
in case this didn't solve the issue yet please also refer to [[How to fix preferences that won't save]].

How can i set user's date format?

problem:
I have two users daniel and william.
daniel login the EBS and the date format is :yyyy/mm/dd
william login the EBS and the date format is : DD-MON-RRRR
How can i set date format for everyone?
Thanks.
Daniel.
2006.11.16

Check the system profile ICX: Date Format Mask. Is it set at the application level? Does each user have different date format?
How do you access the application? Through ICXINDEX page or through dev60cgi/f60cgi?
Please note that changing the above profile option will not affect users logging through dev60cgi/f60cgi, in case you need to change it for the users who are accessing the application this way you can use the FORMS60_USER_DATE_FORMAT parameter in the url

How can I set PCTUSED and PCTFREE in Warehouse databases?

Hi,
There are many Schemas in our database and some are used for OLTP and some others are used for Warehouse. Also our tablespaces are Local Managed.
Could you help me please how can I set PCTUSED and PCTFREE for Warehouses and OLTP.
What are your suggestions? What should be optimum?
DB version is 9.2.0.8.
thanks & regards

If you are using locally managed tablespaces with ASSM then the pctused parameter would no longer apply. In all cases dictionary vs locally managed with or without ASSM you should set pctfree based on how much of the data row column values are present at initial row insertion and how likely any column is upated to a larger size after initial row insertion.
In a warehouse I would expect most of the tables to have 100% of the row data present at initial insert and for the data to never be updated. For tables meeting this requirement a pctfree of 3 - 5% would likely be a good choice. I never like to use 0% since the day may come when you add another column to the table.
With OLTP tables the ideal pctfree value varies more from table to table. Most table so seem to work well enought with the default 10% but I have seen tables that need 50% pctfree to prevent row migration since only the key column values existed at initial insert and most all the other column data was added later.
Where ASSM is not in use I like to set pctused to 95 - pctfree. Over the last 15 years I am not sure I ever found a need to change the pctused from this once set. I have set a lot of tables up over the years from the old default of 40% to use 60% and 80% before resetting everything during a server platform migration as I mentioned above.
HTH -- Mark D Powell --

How can I increase the parameter db_files

Hi,
When I am trying to add a new data file to Tablespace it is giving error.
1. How can I increase the parameter db_files?
Sap Version is: 4.7E and Database is: 0racle 9.2.0
Thanks&Regards,
Nani

hello nani
1. connect to database
SQL> show parameter db_files
NAME                                 TYPE        VALUE
db_files                             integer     200
SQL> alter system set db_files=350 scope=spfile;
System altered.
SQL> show parameter db_files
NAME                                 TYPE        VALUE
db_files                             integer     200
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 264241152 bytes
Fixed Size                  1248476 bytes
Variable Size             176161572 bytes
Database Buffers           79691776 bytes
Redo Buffers                7139328 bytes
Database mounted.
Database opened.
SQL> create pfile from spfile;
File created.
SQL> show parameter db_files
NAME                                 TYPE        VALUE
db_files                             integer     350
SQL>
Edited by: Shishir Bajpai on Mar 3, 2009 12:38 PM

How can I set VM parameter in NW developer studio?(not in configtool)

Similar Messages

Maybe you are looking for