How can I setup port forwarding for RDP (3389) using MHS291LVW?

Hi,
I went into my MHS291LVW and I enabled port forwarding. I didn't see an option for Remote Desktop (RDP) so I added a custom application called RDP and I set "Global Port" and "Private Port" to port number 3389 and I set it as TCP/UDP and then entered the local IP (192.168.1.135) of the PC I want to connect to. I made my local PC use a static IP so this 192.168.1.135 will never change.
Then when I go under "About Jetpack" I see that there is a WAN IP address listed; so I wrote this down and then I tried to connect remotely to this PC from outside the Verizon Jetpack network but it didn't work.
Then the strange thing is when I go to Google and type "what's my IP", Google shows me a different external WAN IP address that Verizon Jetpack showed me in the admin web interface. Anyway, I tried this WAN IP address that Google gave me but it still didn't connect to my local PC.
Can someone please help me in figuring out why this is not working?
I've setup port forwarding on plenty of other routers (Linksys, Netgear, etc.), but I never tried it on a Verizon Jetpack MHS291LVW but it should work the same so I'm not sure why this is not working for me.
Thank you!

> If I can't use the "Microsoft Windows RDP" service because of the private IP; would I be able to use a software like "TeamViewer" to gain access to my PC?
Yes. This is how a VPN server works around the private IP address restrictions of the VZW network. It will work and you will be able to access anything that is centrally connected to a VPN server.
> Also, if I were to take the VPN option and setup a VPN server on the PC
Not on the remote PC silly guy. Hosting a VPN from within the VZW network wont do you any good as its IP will be masked by the NAT firewall. You must setup a VPN server off of the VZW network for it to work. That way when you remote into the VPN server it is already outside of the VZW NAT that is restricting you in the first place. There are many VPN vendors that you can test out and pay access for if you don't have any interest in setting up one on your own. Some are free where others charge more money for more bandwidth and customization features.
> If I were to try to connect to this PC on the JetPack side from an external PC on a different network I don't know how I would be able to access it since the JetPack IP address is private.
The idea is that everything rests on the VPN server when remote connections are made. The Jetpack PC, VPN Server and your current local PC all connect to the VPN server so everything is then local communication. The VPN will make it appear as though everything is virtually connected to the same appliance even though they are physically separated by whatever distance you want.

Similar Messages

Port Forwarding for RDP 3389 is not working

Hi,
I am having trouble getting rdp (port 3389) to forward to my server (10.20.30.20). I have made sure it is not an issue with the servers firewall, its just the cisco. I highlighted in red to what i thought I need in my config to get this to work. I have removed the last 2 octets of the public IP info for security .Here is the configuration below:
TAMSATR1#show run
Building configuration...
Current configuration : 11082 bytes
version 15.2
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname TAMSATR1
boot-start-marker
boot system flash:/c880data-universalk9-mz.152-1.T.bin
boot-end-marker
logging count
logging buffered 16384
enable secret
aaa new-model
aaa authentication login default local
aaa authentication login ipsec-vpn local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization console
aaa authorization exec default local
aaa authorization network groupauthor local
aaa session-id common
memory-size iomem 10
clock timezone CST -6 0
clock summer-time CDT recurring
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879941380
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879941380
revocation-check none
rsakeypair TP-self-signed-1879941380
crypto pki certificate chain TP-self-signed-1879941380
certificate self-signed 01
3082024B 308201B4 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383739 39343133 3830301E 170D3131 30393136 31393035
32305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38373939
34313338 3030819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100BD7E 754A0A89 33AFD729 7035E8E1 C29A6806 04A31923 5AE2D53E 9181F76C
ED17D130 FC9B5767 6FD1F58B 87B3A96D FA74E919 8A87376A FF38A712 BD88DB31
88042B9C CCA8F3A6 39DC2448 CD749FC7 08805AF6 D3CDFFCB 1FE8B9A5 5466B2A4
E5DFA69E 636B83E4 3A2C02F9 D806A277 E6379EB8 76186B69 EA94D657 70E25B03
542D0203 010001A3 73307130 0F060355 1D130101 FF040530 030101FF 301E0603
ip dhcp excluded-address 10.20.30.1 10.20.30.99
ip dhcp excluded-address 10.20.30.201 10.20.30.254
ip dhcp excluded-address 10.20.30.250
ip dhcp pool tamDHCPpool
import all
network 10.20.30.0 255.255.255.0
default-router 10.20.30.1
domain-name domain.com
dns-server 10.20.30.20 8.8.8.8
ip domain name domain.com
ip name-server 10.20.30.20
ip cef
no ipv6 cef
license udi pid CISCO881W-GN-A-K9 sn
crypto vpn anyconnect flash:/webvpn/anyconnect-dart-win-2.5.3054-k9.pkg sequence 1
ip tftp source-interface Vlan1
class-map type inspect match-all CCP_SSLVPN
match access-group name CCP_IP
policy-map type inspect ccp-sslvpn-pol
class type inspect CCP_SSLVPN
pass
zone security sslvpn-zone
crypto isakmp policy 10
encr aes 256
authentication pre-share
group 2
crypto isakmp policy 20
encr aes 192
authentication pre-share
group 2
crypto isakmp key password
crypto isakmp client configuration group ipsec-ra
key password
dns 10.20.30.20
domain tamgmt.com
pool sat-ipsec-vpn-pool
netmask 255.255.255.0
crypto ipsec transform-set ipsec-ra esp-aes esp-sha-hmac
crypto ipsec transform-set TSET esp-aes esp-sha-hmac
crypto ipsec profile VTI
set security-association replay window-size 512
set transform-set TSET
crypto dynamic-map dynmap 10
set transform-set ipsec-ra
reverse-route
crypto map clientmap client authentication list ipsec-vpn
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
interface Loopback0
ip address 10.20.250.1 255.255.255.252
ip nat inside
ip virtual-reassembly in
interface Tunnel0
description To AUS
ip address 192.168.10.1 255.255.255.252
load-interval 30
tunnel source
tunnel mode ipsec ipv4
tunnel destination
tunnel protection ipsec profile VTI
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface FastEthernet4
ip address 1.2.3.4
ip access-group INTERNET_IN in
ip access-group INTERNET_OUT out
ip nat outside
ip virtual-reassembly in
no ip route-cache cef
ip route-cache policy
ip policy route-map IPSEC-RA-ROUTE-MAP
duplex auto
speed auto
crypto map clientmap
interface Virtual-Template1
ip unnumbered Vlan1
zone-member security sslvpn-zone
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.20.30.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
ip local pool sat-ipsec-vpn-pool 10.20.30.209 10.20.30.239
ip default-gateway 71.41.20.129
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source list ACL-POLICY-NAT interface FastEthernet4 overload
ip nat inside source static tcp 10.20.30.20 3389 interface FastEthernet4 3389
ip nat inside source static 10.20.30.20 (public ip)
ip route 0.0.0.0 0.0.0.0 public ip
ip route 10.20.40.0 255.255.255.0 192.168.10.2 name AUS_LAN
ip access-list extended ACL-POLICY-NAT
deny   ip 10.0.0.0 0.255.255.255 10.20.30.208 0.0.0.15
deny   ip 172.16.0.0 0.15.255.255 10.20.30.208 0.0.0.15
deny   ip 192.168.0.0 0.0.255.255 10.20.30.208 0.0.0.15
permit ip 10.20.30.0 0.0.0.255 any
permit ip 10.20.31.208 0.0.0.15 any
ip access-list extended CCP_IP
remark CCP_ACL Category=128
permit ip any any
ip access-list extended INTERNET_IN
permit icmp any any echo
permit icmp any any echo-reply
permit icmp any any unreachable
permit icmp any any time-exceeded
permit esp host 24.153. host 66.196
permit udp host 24.153 host 71.41.eq isakmp
permit tcp host 70.123. host 71.41 eq 22
permit tcp host 72.177. host 71.41 eq 22
permit tcp host 70.123. host 71.41. eq 22
permit tcp any host 71..134 eq 443
permit tcp host 70.123. host 71.41 eq 443
permit tcp host 72.177. host 71.41. eq 443
permit udp host 198.82. host 71.41 eq ntp
permit udp any host 71.41. eq isakmp
permit udp any host 71.41eq non500-isakmp
permit tcp host 192.223. host 71.41. eq 4022
permit tcp host 155.199. host 71.41 eq 4022
permit tcp host 155.199. host 71.41. eq 4022
permit udp host 192.223. host 71.41. eq 4022
permit udp host 155.199. host 71.41. eq 4022
permit udp host 155.199. host 71.41. eq 4022
permit tcp any host 10.20.30.20 eq 3389
evaluate INTERNET_REFLECTED
deny   ip any any
ip access-list extended INTERNET_OUT
permit ip any any reflect INTERNET_REFLECTED timeout 300
ip access-list extended IPSEC-RA-ROUTE-MAP
deny   ip 10.20.30.208 0.0.0.15 10.0.0.0 0.255.255.255
deny   ip 10.20.30.224 0.0.0.15 10.0.0.0 0.255.255.255
deny   ip 10.20.30.208 0.0.0.15 172.16.0.0 0.15.255.255
deny   ip 10.20.30.224 0.0.0.15 172.16.0.0 0.15.255.255
deny   ip 10.20.30.208 0.0.0.15 192.168.0.0 0.0.255.255
deny   ip 10.20.30.224 0.0.0.15 192.168.0.0 0.0.255.255
permit ip 10.20.30.208 0.0.0.15 any
deny   ip any any
access-list 23 permit 70.123.
access-list 23 permit 10.20.30.0 0.0.0.255
access-list 24 permit 72.177.
no cdp run
route-map IPSEC-RA-ROUTE-MAP permit 10
match ip address IPSEC-RA-ROUTE-MAP
set ip next-hop 10.20.250.2
banner motd ^C
UNAUTHORIZED ACCESS TO THIS NETWORK DEVICE IS PROHIBITED.
You must have explicit permission to access or configure this device. All activities performed on this device are logged and violations of this policy may result in disciplinary and/or legal action.
^C
line con 0
logging synchronous
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0
access-class 23 in
privilege level 15
logging synchronous
transport input telnet ssh
line vty 1 4
access-class 23 in
exec-timeout 5 0
privilege level 15
logging synchronous
transport input telnet ssh
scheduler max-task-time 5000
ntp server 198.82.1.201
webvpn gateway gateway_1
ip address 71.41. port 443
http-redirect port 80
ssl encryption rc4-md5
ssl trustpoint TP-self-signed-1879941380
inservice
webvpn context TAM-SSL-VPN
title "title"
logo file titleist_logo.jpg
secondary-color white
title-color #CCCC66
text-color black
login-message "RESTRICTED ACCESS"
policy group policy_1
   functions svc-enabled
   svc address-pool "sat-ipsec-vpn-pool"
   svc default-domain "domain.com"
   svc keep-client-installed
   svc split dns "domain.com"
   svc split include 10.0.0.0 255.0.0.0
   svc split include 192.168.0.0 255.255.0.0
   svc split include 172.16.0.0 255.240.0.0
   svc dns-server primary 10.20.30.20
   svc dns-server secondary 66.196.216.10
default-group-policy policy_1
aaa authentication list ciscocp_vpn_xauth_ml_1
gateway gateway_1
ssl authenticate verify all
inservice
end

Hi,
I didnt see anything marked with red in the above? (Atleast when I was reading)
I have not really had to deal with Routers at all since we all access control and NAT with firewalls.
But to me it seems you have allowed the traffic to the actual IP address of the internal server rather than the public IP NAT IP address which in this case seems to be configured to use your FastEthernet4 interfaces public IP address.
There also seems to be a Static NAT configured for the same internal host so I am wondering why the Static PAT (Port Forward) is used?
- Jouni

Problems with Port Forwarding for RDP in WebVPN

Hi,
I'm hoping somebody can help me solve this problem that's been bugging for weeks. We recently implemented a double-layer firewall architecture. Before that, our users can access RDP via port forwarding on WebVPN or the Cisco VPN client without any problems.
After we implemented the double-layer firewall architecture, users who are going through the WebVPN and port forwarding for RDP began to experience frequent disconnections, slowness or freezing connections. The users who are using the client are fine.
I checked the logs and I'm getting repetitive TCP-O for the port forwarding connections for RDP. Additional information: the FW we installed as a 2nd layer is Netscreen. I've already set the policy on it to Any-Any for the meantime to help in troubleshooting but to no avail.
I hope somebody can help me in sorting this out as I'm kind of confused on the difference between the port-forwarding for RDP via the WebVPN and the normal RDP via the client.

Hi,
I didnt see anything marked with red in the above? (Atleast when I was reading)
I have not really had to deal with Routers at all since we all access control and NAT with firewalls.
But to me it seems you have allowed the traffic to the actual IP address of the internal server rather than the public IP NAT IP address which in this case seems to be configured to use your FastEthernet4 interfaces public IP address.
There also seems to be a Static NAT configured for the same internal host so I am wondering why the Static PAT (Port Forward) is used?
- Jouni

If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
Thanks

Sorry you get only one notification sound for all email accounts. you can send a suggestion to apple here http://www.apple.com/feedback/

HT4436 how can i setup one account for me and my kids ?

how can i setup one account for me and my kids ?

One account each, or one account for all of you to share?
Either way, follow the instructions here: http://www.apple.com/icloud/setup/
Remember, if you share an iCloud account, you won't be able to maintain independent Contact lists, calendars, bookmarks etc. They will all be synced to all devices setup using the same account.

Hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)

hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)
I would like to be able to quickly bounce down my mixes, through the Zed outputs.

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

I have multiple computers and iPhones and now iTunes will not allow my wife to load applications or use her own iTunes playlists. How can I setup each device for each user correctly?

We have multiple computers and iPhone devices which I have passed on to other family members, such as my wife. Now she is not able to load apps to her devices, eventhough it appear she is logged into her own iTunes account. How can I setup iTunes correctly on each device? Currently, there is one PC and one Mac laptop and we each have iPhones, with one other family member not able to use his 'passed-down' device for iTunes, also.

Hello dal1820
Check out the article below on how to use multiple devices with one computer. The main idea that I want to point out is to have different users for each person as it is the easy way to make sure that no issue happen when syncing.
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Regards,
-Norm G.

How do I setup "port forwarding" on a Time Capsule on Mountain Lion?

I am trying to set up a Foscam FI8910W so that I can access it remotely. I have some tutorials about how to do it, but most seem to involve using an old OS and I'm getting hung up at the step that involves setting up port forwarding. I have never done this before and I'm flummoxed.

Tap AirPort Utility
Tap the AirPort Extreme icon
Tap Edit
Tap Advanced
Tap Port Settings
Tap New Entry
Enter the port type and values provided by the manufacturer

Port Forwarding For WinXP (RDC) (Using AE 802.11n)

I have some problem and I need some thoughts and input from someone else, Here goes.
Here is what im looking to accomplish. From my work I want to be able to connect into my machine at home (windows XP). I cannot use the standard RDC (Remote Desktop Connection) port 3389. My work blocks all traffic coming through that port. So I need to push it through port 443. My co-worker is doing this just fine with a Netgear switch at home, so I know it should work.
In theory it should work like this.
(In Windows XP I have done this)
Change the registry to move through port 443 (windows web site actually shows you how to do this). I turned off the windows firewall completely. RDC has also been turned on. A static IP has been given to this machine as well
(Airport Extreme I have done this)
Put a static ip and Mac address for the Windows machine. Turned on NAT and Forwarded the UDP and TCP ports for public and Private to port 443. As well as set the private IP adders in the port forwarding to the ip on the windows machine.
(Current results)
I think this is where the beginning of my problem and im not sure if its a windows or a AE problem. Before changing the port on the windows machine I can RDC locally. But cannot get through the AE on the default port 3389.
After changing the port on the windows machine to 443 I can no longer RDC locally and still cannot connect from out side the AE.
Im not sure where to take it from here. Please advise someone im dying to cruse the net from work

Hello Preston Holder. Welcome to the Apple Discussions!
As you are already aware RDC clients listen on port 3389 by default.
To change the listening port will require making a Registry mod. This would be typically used if you needed to access more than one computer remotely. (ref: Microsoft Knowledge Base article 306759)
Locate the appropriate Registry key using Regedit.exe:
HKEYLOCALMACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\Port Number
From the Edit menu, click Modify and then click Decimal. Choose a new port number. In general, choosing a number between 49152 and 65535 will avoid conflict with any other apps on your system, but you could theoretically use any port on the system. Once you set the port number you also need to configure your router to pass the specified port to your computer.
To access your computer remotely, instead of typing just the IP address, you need to type the IP address followed by the port number like this: 192.168.1.1:50001

How can I create digital signatures for my users using Windows 2008 Active Directory Certificate Services?

Hi,
I need to create local digital signatures for my users. How can I do that using W2k8 Active Directory Certificate Services? We are gonna sign Office 2010 documents.
What company offers cheap digital signatures solutions?
Thanks in advanced

Consider the following:
if you use your local CA server to issue digital signature certificates, there is no cost, because you are eligible to issue so many certificates as you need. However, documents signed by these certificates will be considered trusted only within your AD
forest and other machines that explicitly trust your local CA. Any external client will not trust your signatures.
If you want to make your signature trusted outside your network (say, in worldwide), you need to pruchase a certificate from trusted commercial CA (VeriSign, GoDaddy, GlobalSign, StartCom, etc) according to respective vendor price list. In that case you
don't need to have your local CA server, because it is not used. All certificate management is performed by the external CA. A most common scenario is to purchase signing certificate for particular departament principals (head managers) or few certificates
for a whole company (all documents are revised by a responsible person or persons who holds signing certificate and sign them after review).
so, it is not clear from your post what exactly you need.
My weblog: http://en-us.sysadmins.lv
PowerShell PKI Module: http://pspki.codeplex.com
Windows PKI reference:
on TechNet wiki

How can I set up Lync for my personal use?

How can I set up Lync 2013 for my personal use. I don't have any personal domain (using outlook, hotmail etc) or any server. Is there a way, I can still set up Lync on my PC? Please advise.

You can't use a personal email account (MSN/Gmail/etc..)
to sign into the Lync client. You can purchase an account from Lync Online: http://office.microsoft.com/en-us/lync/lync-online-overview-and-features-online-meetings-and-instant-messaging-FX103789571.aspx

How can I Setup a template for Envelope 6.5 x 3.5 inches in Pages 5.2.2

I am vexed by a problem printing a smaller envelope from pages. If I take the Pages # 10 envelope template, it prints properly. If I go to page setup for the # 10 template and change the dimensions to W 6.5 and H 3.5 inches it prints across the envelope whether I have it in the portrait or landscape setting. Only difference is in the portrait setting it wraps the print at the end of the page. In Portrait setup it previews with the envelope vertical and the print across. If I go to landscape it previews properly but prints across the envelope. I tried reversing the order of the H and W dimensions and it still doesn't work. I have pages 5.2.2 and Epson printer 3520

Set up as facing A4 landscape pages. In Print Booklet you would need to set the page size to A2 and set the positioning to centered in the printer setup dialog. In thory I suppose it should be possible to print two-up, but the only way I can think of to make that happen would be to set up a new A3 portrait facing pages file and place the A4 into it twice (use Scott Zanelli's script from InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files), then use print bookle on that file.
The bigger question in my mind is do you have a printer that can use A2 sheets? Id yo are sending this out, le the printer do the imposition from a your A4 file exported normally as sequential single pages as PDF.

How can I setup the iPad for a new user

I bought iPad for my mom and initially set it up using my apple ID. Now, I want to reconfigure iPad using mom's apple ID. All settings must be in her ID. How do I do it?

Look at this link.
Giving your former iPad to a spouse or family member: the quick guide
http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
 Cheers, Tom

How to make single port fowarding for camera by using airport extreme ???

hi
I have airport extreme model no A1143 (apple)
when I was using linksys ,I have camera
I reserve IP local for camera and then by aplication single port foward I put IP local for camera so I would get for the picture or video
Is any body can help by using apple airport extreme model no A1143
where should I put the IP local for the camera ?which application
thanks
Message was edited by: charlie368

charlie368, Welcome to the discussion area!
Using AirPort Utility you can configure the AirPort Extreme base station (AEBS) to forward the port(s) to the camera. However the camera will need to be assigned a local IP address. The default local IP addresses are in the 10.0.1.x range.
To get to the camera from the internet, you would use the IP address provided by your ISP. This is the one used by the WAN side of the AEBS.

How can I set Response Queue for standalone client using JMS Jax-RPC ?

Hi,
I am developing a standalone client for a web service running on a Weblogic 10.3 server using JMS transport. The response seems to be placed in JMSServer!JMSServer.TemporaryQueue0 when I try to test the application.
The request xml created:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<content>
    <entry type="1">
        <textMessage fromQueue="true" JMSTimestamp="1285343150328" JMSReplyToDomain="1" JMSReplyTo="JMSServer!JMSServer.TemporaryQueue1" JMSRedelivered="false" JMSPriority="4" JMSMessageID="ID:<520181.1285343150328.0>" JMSExpiration="0" JMSDestination="SystemModule!demoQueue" JMSDeliveryMode="2">
            <headerProperty type="java.lang.String" value="text/xml; charset=utf-8" name="_wls_mimehdrContent_Type"/>
            <headerProperty type="java.lang.String" value=""http://oracle/communications/platform/demo/webservices/rpc/secure/gen/getPhoneList"" name="_wls_mimehdrSOAPAction"/>
            <headerProperty type="java.lang.String" value="/DemoWebServices/DemoWebServicesJMS" name="URI"/>
            <text><env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><gen:lastName xmlns:gen="http://oracle/communications/platform/demo/webservices/rpc/gen">8</gen:lastName></env:Body></env:Envelope></text>
        </textMessage>
    </entry>
</content>On the application server I have configured a Response Queue that I would like my application to use. The client stubs where generated using the ant Task: weblogic.wsee.tools.anttasks.ClientGenTask.
Standalone client code snippet:
      DemoWebServices_Impl service = null;
      try {
          service = new DemoWebServices_Impl(wsdl);
      } catch (ServiceException e) {
          e.printStackTrace();
      DemoWebServicesPortType port = null;
      //create credential provider and set it to the Stub
      try {
          port = service.getDemoWebServicesJMSPort();
      } catch (ServiceException e) {
        e.printStackTrace();
      PhoneList response = null;
      try {
          response = port.getPhoneList("8");
      } catch (RemoteException e) {
          e.printStackTrace();
      if(response != null) {
        for(Phone aPhone : response.getPhone()) {
            System.out.println("aReturned Phone number is: " + aPhone.getPhoneNumber());
      }Would you please help me with modifying the client code to define which Queue the web service response should be placed in? setQueue() of the JMSTransportInfo class did not do the trick. Please help....
Thanks,
Sajitha
Edited by: Sajitha on Sep 24, 2010 12:29 PM
Edited by: Sajitha on Sep 27, 2010 8:44 AM

Hi,
I am developing a standalone client for a web service running on a Weblogic 10.3 server using JMS transport. The response seems to be placed in JMSServer!JMSServer.TemporaryQueue0 when I try to test the application.
The request xml created:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<content>
    <entry type="1">
        <textMessage fromQueue="true" JMSTimestamp="1285343150328" JMSReplyToDomain="1" JMSReplyTo="JMSServer!JMSServer.TemporaryQueue1" JMSRedelivered="false" JMSPriority="4" JMSMessageID="ID:<520181.1285343150328.0>" JMSExpiration="0" JMSDestination="SystemModule!demoQueue" JMSDeliveryMode="2">
            <headerProperty type="java.lang.String" value="text/xml; charset=utf-8" name="_wls_mimehdrContent_Type"/>
            <headerProperty type="java.lang.String" value=""http://oracle/communications/platform/demo/webservices/rpc/secure/gen/getPhoneList"" name="_wls_mimehdrSOAPAction"/>
            <headerProperty type="java.lang.String" value="/DemoWebServices/DemoWebServicesJMS" name="URI"/>
            <text><env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><gen:lastName xmlns:gen="http://oracle/communications/platform/demo/webservices/rpc/gen">8</gen:lastName></env:Body></env:Envelope></text>
        </textMessage>
    </entry>
</content>On the application server I have configured a Response Queue that I would like my application to use. The client stubs where generated using the ant Task: weblogic.wsee.tools.anttasks.ClientGenTask.
Standalone client code snippet:
      DemoWebServices_Impl service = null;
      try {
          service = new DemoWebServices_Impl(wsdl);
      } catch (ServiceException e) {
          e.printStackTrace();
      DemoWebServicesPortType port = null;
      //create credential provider and set it to the Stub
      try {
          port = service.getDemoWebServicesJMSPort();
      } catch (ServiceException e) {
        e.printStackTrace();
      PhoneList response = null;
      try {
          response = port.getPhoneList("8");
      } catch (RemoteException e) {
          e.printStackTrace();
      if(response != null) {
        for(Phone aPhone : response.getPhone()) {
            System.out.println("aReturned Phone number is: " + aPhone.getPhoneNumber());
      }Would you please help me with modifying the client code to define which Queue the web service response should be placed in? setQueue() of the JMSTransportInfo class did not do the trick. Please help....
Thanks,
Sajitha
Edited by: Sajitha on Sep 24, 2010 12:29 PM
Edited by: Sajitha on Sep 27, 2010 8:44 AM

How can I setup port forwarding for RDP (3389) using MHS291LVW?

Similar Messages

Maybe you are looking for