How can I submit form data to an outside url after a purchase?

I'm using BC as the ecommerce portion of a site that sells certificates that people will purchase.  There is an outside developer creating PDF certificates with their info and a custom code.  Does anyone know how I can submit data from purchase form to an external url?

Two ways.
To get around cross site restrictions:
- In javascript dynamically create a hidden iframe, copy the form data into that iframe, attach an onload event to that iframe, submit the form (in the iframe), once the iframe as loaded, submit the BC form as usual. Google around there should be examples out there.
- Use JSONP to do the same thing, but this will use a GET so your data wont be encrypted at all (this might not be a concern for you and you'll need to check if the outside developer making the PDF can handle this response).

Similar Messages

  • How can i submit form-data with acrobat pocket pc

    how can i submit form-data (http-post) on a PPC?
    how can i store the data offline?
    which submit-functions are availabe for the pocket pc reader?
    do i need ARES?
    where can i find a documentation of of the available functions for the ppc version?
    where can i fond form-samples for ppc?
    from the docu on my pocket pc:
    Submit form data using handheld devices over a wireless connection. If you are working offline, the data is temporarily stored, then submitted once a connection is established. Send forms by e-mail or directly to the destination server using a cradle or cable

    To your question regarding the Pocket PC version of Reader, I downloaded Adobe Reader for Pocket Pc 2 and installed it on my HP iPAQ . I then loaded my test PDF file onto the iPAQ. The Reader for Pocket PC preformed an email submission fine. However, I received no indication that anything happened when I tried an HTTP Post. So I think you can only do an email submission.
    In general, I have been testing to see how much I can do without the Live Cycle Reader Extensions, since for sure I will never be able to purchase them. What I have found is that for Acrobat Reader 7, the email submission works for all of the people I have asked to test it, but the HTTP Post has worked for only one of the two people who have tested it so far with Reader 7 (the one for which it worked claims that he only has Reader 7 on his computernot Acrobat).

  • How can you copy form data from an online PDF, in your browser?

    Just a quick query, I've recently filled out an online application and I filled this out on an online PDF form. This is the form link:
    http://3fivetwo.com/dloads/application_pack_-_admin_long10.pdf
    How can I copy the data I typed into this form, to a word document for example? Or is there any way I can save this as a PDF with all the data in the form, to send it as an email?
    I've downloaded the form, but it just shows blank pages with no fields filled.
    Thanks very much!

    download the form to your local disk
    open it with Adobe Reader and fill in all the details
    save it
    send the completed form by email

  • How can i return my data on my iphone 6 after restoring with another iphone user from itunes?

    I have restored my iphone 6 with another iphone instead of selecting an option "start with a new iphone" . Now all my datas have been removed and they are replaced with another iphone which was backed up previously in my itunes. My question is how can i return my previous data ?

    Restore it using a backup made of your current phone.

  • HOW CAN I GET MY DATA BACK ON MEDIA CARD AFTER WIPING DEVICE

    please help, i wiped my device clean then did a back up and everything was back except the things i had on my media card. how do i get it back?

    When  you wiped your device, there is an option which you must check in order to wipe your Media card, did you have that checked or unchecked?
    I am afraid that the Media Card in included in the backup of the device memory.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can I get a date picker or wheel to show up in the form to make filling in a form with a lot of

    how can I get a date picker or wheel to show up in the form to make filling in a form with a lot of dates more easy?

    There is no built-in date picker available for forms created in Acrobat. There are some third-party solutions involving JavaScript (either a large collection of fields or a custom dialog) though. Also, text fields with date formatting will use a wheel type date picker on Android/iOS devices with Adobe Reader.

  • How can i save the data in a jpanel form to a .txt document

    how can i save the data in a jpanel form to a text file using parse function,this should happen when i click a save button .
    please help me..

    each time when i fill the form and click save button ,all the data in the form should be written to a text file and each time when i repeat it should append to the old data in the text file.the elements in the form should be seperated by pipe delimeter.
    thanks for your patience..

  • How we can populate the form data from 2D barcode

    Hi All,
    Can anyone tell me how we can populate the form data from 2D barcode, will this can be done through script(javascript)?.
    Thanks & Regards,
    Faisal Afzal

    I was hoping someone could put me in the right direction here. I am basically doing the same . I am decodeing the information stored in a 2D Bar code and sending this information to an XML file, then I am trying to combine that xml file with a blank PDF template but the process is failing beacuse there are some additional tag fields the XML data from the  Decode->Extract XML process.
    The XML file from the decode process gives the structure below..notice therer some extra tags (lines 2- 4)
    <?xml version="1.0" encoding="UTF-8"?>
    <xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
    <xfa:datasets>
    <xfa:data>
    <form1>
    The XML structure that is expected by the PDF template is as follows
    <?xml version="1.0" encoding="UTF-8"?>
    <form1>
    So the xml output of the Decode barcode + Extract XML process has three extra lines of tag. Is there a way I could use a process within liveCycle to clean out those three lines in real-time before sending the xml to be recombined with the PDF template.
    Thanks

  • How can i read the data fromtext fieldsin the form of bytes??

    Hi friends,
    How can i read the data fromtext fieldsin the form of byte string while using Socket connection.
    I have two text fields. i need to send the data from the textfeilds to the server using a byte string.
    Can anyboday help me???
    KK

    Does <cfdbinfo> work for Access DBs?
    You might be better off asking this on a MS Access forum.  It's more of an Access issue than a CF one.
    Adam

  • Oracle Forms - How can I create a Data Block with query

    Dear friends I have a question, I couldn't do this..
    I have a sql query, I want to show the datas of the query.. How can I do this. ?
    Data Block Wizard wants a table, view or stored procedure, but I have a query, how can I create a data block with my query.. I m waiting your helps..? Please...
    Semih

    Hi,
    You have two options
    1. create a view and base the block on the view
    2. create a block with a query Data Source Type of 'FROM clause query'
    Hope this helps
    Neil

  • How Can I Submit A Concurrent Program Using Form Personalizaton?

    How can I submit a concurrent program? Please help!
    Thanks in advance
    PhuTri

    I think the problem in your case coould be that the Concurrent Program you are trying to run has not been registered in the responsibility from which you are runnig it.
    For eg. You are trying to run a program from Inventory Super User responsibility and the request group attached to the responsibility is say 'RG Inventory', but the concurrent program which you are trying to run from your inventory super user responsibility is registered under some other request group say 'RG Order Mangement' which is not attached to the nventory responsibility.
    So register the program under correct request group and see if this helps you.
    Other possibility is that check if you have permission to submit request from that responsibility. You can check this by going to the Menu ->View If the Request menu is disabled then you cannot submit the request.

  • Can I submit form using app.launchURL

    I want to submit a pdf form without replacing my page. I need it open in new tab.
    The script below is work, but it replaces my old page
    this.submitForm({
    cURL:
    "http://localhost:8080/project/TestServlet",
    cSubmitAs:
    "PDF",
    cCharset:
    "utf-8"
    This script is open a new tab but I have no idea how can I submit a form using this
    app.launchURL("http://localhost:8080/project/TestServlet", true);
    Can anyone guide me how to submit form with open new tab on the web browser?
    Thanks.

    No, you can't submit the form like that. You could submit some form data as
    a URL parameter, though.

  • How can I extract the data from Xstring .

    Hi Gurus ,
    How can I extract the data from a XSTRING  .
    I have to get the data which is filled in the survey form the data is getting saved in form of xstring .
    Someone told me that there is a standard FM for that . but I am not able to find .
    Please reply with the FM in case some one knows about it .
    Thanks in advance .

    The following code works as of 7.0 (in any SAP system):
    FORM XSTRING_TO_STRING USING input TYPE xstring CHANGING output TYPE string.
    TYPES : BEGIN OF ty_struc,
              line TYPE c LENGTH 100,
            END OF ty_struc.
    DATA lt_char TYPE TABLE OF ty_struc.
    DATA length TYPE i.
    length = xstrlen( input ) / cl_abap_char_utilities=>charsize.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        buffer                = input
      tables
        binary_tab            = lt_char.
    CONCATENATE LINES OF lt_char INTO output RESPECTING BLANKS.
    output = output(length).
    ENDFORM.
    Edited by: Sandra Rossi on Mar 30, 2010 12:24 AM

  • How can i export the data to excel which has 2 tables with same number of columns & column names?

    Hi everyone, again landed up with a problem.
    After trying a lot to do it myself, finally decided to post here..
    I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
    It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
    Because both the tables have same number of columns & column names.
    Below are 2 tables with column names:
    Table-1 (MONTHLY_PART_1)
    Table-2 (MONTHLY_PART_2)
    SL_NO
    SL_NO
    COMP
    COMP
    DUE_DATE
    DUE_DATE
    U-1
    U-1
    U-2
    U-2
    U-4
    U-4
    U-20
    U-20
    U-25
    U-25
    Since both the tables have same column names, I'm getting the following error :
    Error 402 at line 103, column 4
      alias required in SELECT list of cursor to avoid duplicate column names.
    So How can i export the data to excel which has 2 tables with same number of columns & column names?
    Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
    Help me with this please.
    Thank You.

    You'll have to *alias* your columns, not prefix it with the table names:
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
      for rData in cData loop
    ERROR at line 18:
    ORA-06550: line 18, column 3:
    PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
    ORA-06550: line 18, column 3:
    PL/SQL: Statement ignored
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
    PL/SQL procedure successfully completed.
    cheers

  • How can i add form of my own to "SAPM07DR"

    i been asked to add form develop by me to the standart program "SAPM07DR" .
    this task came from the need of the implementation
    of the "material management" , assign forms and program.
    now i get the output "ZWE4"  ,
    and i want to assign form of my own  ,
    i tried to add smart form but i get message
    "Errors occurred while processing output"
    so I want to try layout  with  standard program "SAPM07DR" .
    how can i add form of my own to this program

    First, you must copy this program to your own program with "ZSAPM07DR" then copy the include program where the routine pass through the program
    example: entry_we03 -> from include M07DRENT and M07DRAUS
             change this include to ZM07DRENT and ZM07DRAUS
    The next step is binding your form in the program.
    what forms do you use ? Sapscript or Smartforms ?
    in this Program already used Sapscript. You can See there is Open_Form Function in that Program.
    I suggest you to Bind Smartforms.
    IF you use smartforms, Remark All Statement from
    "PERFORM open_form_sammel." to "PERFORM close_form." before endform
    that perform including in M07DRAUS -> FORM lesen_wes USING objky lgortsplit.
    after that put this program to replace the remark :
    data : FMNAME type RS38L_FNAM.
    DATA: ls_control_param      TYPE ssfctrlop.
    set preview parameters
          MOVE 'X' TO ls_control_param-no_dialog.
          MOVE 'X' TO ls_control_param-preview.
          MOVE 'PRINTER'  TO ls_control_param-device.
    *break-point.
    *****Print SmartForms
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
            EXPORTING
              FORMNAME           = TNAPR-SFORM
            IMPORTING
              FM_NAME            = FMNAME
            EXCEPTIONS
              NO_FORM            = 1
              NO_FUNCTION_MODULE = 2
              OTHERS             = 3.
         CALL FUNCTION FMNAME
         EXPORTING
             control_parameters   = ls_control_param
         TABLES
             traptab           = traptab
         EXCEPTIONS
             formatting_error = 1
             internal_error   = 2
             send_error       = 3.
         if sy-subrc NE 0.
    *******message 'Error' type 'S'.
         endif.
    *******End Smartforms
    Hope This Help...

Maybe you are looking for