How can i use a xsd while generating my xml document in oracle?

Hi, how can i use a xsd while building my xml document query, so i know the xml was built properly?
Cheers.

Hi,
Do you want to validate your xml against xsd?
Read this
validating
There are some bugs also, for example xml is invalid but no errors when calling schemaValidate()
Ants

Similar Messages

How can I use the templates I generated in CS5 Bridge, in Lightroom 4.4?

How can I use the templates I generated in CS5 Bridge, in Lightroom 4.4 ?
It appears that I can not link the templates which I have been using in Bridge for some time to Lightroom 4.4.
Is this done on purpose?
Thanks in advance
Doppy

I assume these are metadata templates?
in Bridge, apply a template to an image which has no other metadata (eg a dummy image ) and then import the image into Lightroom, ensuring no metadata applied in the Import dialog. Now in Lightroom's Metadata panel, save the metadata as a new Metadata Preset.
Repeat for each template.

HT2305 I PURCHASED AN ITUNES CARD FOR $50.00 IN THE USA WHILE I WAS ON VACATION HOW CAN I USE THIS CARD WHILE I AM IN THE USA. .......ELLIS

I purchased an itunes card in the USA while on vacation for $50.00----how can I use the card while in the usa.....Ellis

You will need to set up an account in the US iTunes Store to use that card, for which you will need a valid US mailing address. Note that the Terms of Use for the iTunes Store state that you will not attempt to use the US iTunes Store from any other country, so you will not be able to buy new items or re-download previously purchased ones from the US without violating those terms. So you may want to reconsider your purchase and perhaps return the iTunes card or sell it to someone who lives in the US.
Regards.

How can I use the work/result generated by quartusii in labview 8.0

hi ,
I customized a developing board in quartus ii on the basis of nios ii ,and there are many customed i/o devices in it, then I want to ask how can I use the work/result generated by quartusii in labview? I am new in labview. and I can't find any relationship between quartus ii and libview 8.0.
tks!

http://forums.ni.com/ni/board/message?board.id=170&message.id=264457#M264457

How can I use Flash_Slideshow.SWF in my Flash CS4 document?

Hi,
I have downloaded a nice Flash Slide show file (.SWF) and would like to use in my Flash CS4 document without any modification (as it is). How can I use it? There is no .Fla file this Slide Show. It just works using xml file.
Please do help.

Hi,
You need to load a .swf file in your flash document using the loader class. I'm assuming you are using the AS3. Please click on the below link which helps you to use the loader class.
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/display/Loader.html
Thanks

Error while generating an XML Document from XML Schema with JAXB

Hi,
I am following this OTN tutorial to generate the XML document from Java classes got from the XSD document.
http://www.oracle.com/technology/pub/notes/technote_jaxb.html
I am able to generate all the Java classes but getting error on compiling the XMLConstructor.java class which is use for generating the XML document :
I am using JDK 1.5 and
Oracle 10g XML Developer's Kit (XDK) Production for Java. xdk_nt_10_1_0_2_0_production
(though these are warnings I am not able to run it.)
Error
C:\Prototype\classes\jaxbderived\catalog>javac -Xlint XMLConstructor.java
warning: [path] bad path element "%CLASSPATH%": no such file or directory
XMLConstructor.java:42: warning: [unchecked] unchecked call to add(E) as a member of the raw type java.util.List
journalList.add(journal);
^
XMLConstructor.java:46: warning: [unchecked] unchecked call to add(E) as a membe
r of the raw type java.util.List
articleList.add(article);
Thanks
Sanjeev ([email protected])

Use JDK 1.4.

How do you include a DTD when generating an XML document

Hi
I have just started to use the Java XML Pack to generate a XML document.
How do you put the dtd element
<!DOCTYPE Controller SYSTEM "controller.dtd">
in the generated document.
I am using the following piece of code
public void generate(...)
DocumentBuilder builder = factory.newDocumentBuilder();
document = builder.newDocument();
Element rootElement = createElement("Controller");
// Fill out the nodes etc
// Save the result
TransformerFactory tFactory =
TransformerFactory.newInstance();
Transformer transformer = Factory.newTransformer();
File f = new File("dummy.xml");
FileWriter fw = new FileWriter(f);
DOMSource d1 = new
DOMSource(rootElement,"controller.dtd");
StreamResult result = new StreamResult(fw);
transformer.transform(d1, result);
Thanks
Greg

Hello,
I had to go through quite some pain to get this done about a year ago,anyways,here is the solution.
all the import files are in jaxp1.1 bundle.
below is a test class code.
import org.apache.crimson.tree.XmlDocument;
import javax.xml.parsers.*;
import org.w3c.dom.*;
import java.io.*;
public class CreateDTDInXMLFile {
public CreateDTDInXMLFile() {
public static void main(String[] args) {
try {
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
Document document = builder.newDocument();
Element root = document.createElement("root");
Element name = document.createElement("name");
name.appendChild(document.createTextNode("Khalid"));
Element address = document.createElement("address");
address.appendChild(document.createTextNode("2022 11th Ave SW"));
root.appendChild(name);
root.appendChild(address);
document.appendChild(root);
((XmlDocument)document).write(System.out);
//the above will print the simple xml doc,now add the dtd
//suppose the dtd is [<!DOCTYPE root SYSTEM "address.dtd">]
((XmlDocument)document).setDoctype(null,"address.dtd",null);
//now print the xml doc again
System.out.println("\n");
((XmlDocument)document).write(System.out);
} catch(ParserConfigurationException pce) {
pce.printStackTrace();
return;
}catch (IOException ioe) {
ioe.printStackTrace();
This will take care of the agony..
Khalid

How Can i use the key file Generated by RSACryptoServiceProvider to encrypt with php?

I need to be able to encrypt data in PHP using a public key generate by .NET(RSACryptoServiceProvider). I will then decrypt the data later in C# using the private key.
Code Snippet
<RSAKeyValue><Modulus>xU5JyaPNDKXI/h/uo5Vk89wZSz3zsB1+c+1IMYIQa+mCmuRCRPuoBI7ODSV2ndP6grfhdrWEzhpZtkI3SThbBh/3t+tfZ2PF8Iyv9ECN07V64nPCiJGhAnfENE+J9UD9Kw5czXHgZcBbpM5N0VfXmLSleaS65DDoNPtoStVy7ss=</Modulus><Exponent>AQAB</Exponent>4ScAjVrPZii/6lICAP2yDQiNEmNL74+5AcxNVDI0IombfDPIygrqEWmuDu0pngApQak7XnEnLbaDChILFiHPZQ==<Q>4FaYlse+cjrlPD/jk+GsTJeuP7yuQx8ztjVnQWVh6GKQP+uk1dAl6kcZOfLNR6LWwE3CSygt8PthTEw96Zbabw==</Q><DP>XvXtNLE9UjATqYeHEtXtV7Pok/3PVC3A8PIzFzTJaluxeXP51sU9rbRt1hvO9rXIsMnooU+GH7Cfmgq8JEyERQ==</DP><DQ>HXkC/vwq9xLpvuqd2XXSjxV2XQVK16Knxo5pjFvnawJX9S3eMADymj7Q/534firUj9snZXxX3MsJ015I3AFnnQ==</DQ><InverseQ>AM0fVCE3n2FKf2zb3CcDEge1Ko35VvMEL+LXgR87QwO2HScZSuLevGLi2SSAkB1vu8RSNzB028SZReeOZWnq4Q==</InverseQ><D>fI+GKdRNOTTYhQZnw8Im74T+OvArjf2wvUMJlqfD8jyDBYIhDCfL1MTK9KW4Er+moSuxHR5Pb0ZXaKa4/HKlk0aJ1jB2C+jg7zTSuPRNuS16BpVHaJYsQurCwZwElXMum+GxeXK/h3wXWq5HwebjqZr0aLUMZKRcweDPRoVFiRE=</D></RSAKeyValue>
As you see this code snippet is a xml format private key. at .net platform,which can use encrypt or dencrypt.
i have try the Extension Crypt RSA ( http://pear.php.net/reference/Crypt_RSA-1.0.0/elementindex_Crypt_RSA.html ) to help me encrypt data by php.but it haven't return a currect result. the data encrypted by php cann't dencrypt by c#.
does the RSA algorithm provider by Crypt_RSA can give a stand result as c#?
BTW :i just use the xmlkeystring like this.
Code Snippet
<?php
require_once("Crypt/RSA.php");
require_once("includes/Utils.class.php");
 $public_key_string = simplexml_load_string("<RSAKeyValue><Modulus>xU5JyaPNDKXI/h/uo5Vk89wZSz3zsB1+c+1IMYIQa+mCmuRCRPuoBI7ODSV2ndP6grfhdrWEzhpZtkI3SThbBh/3t+tfZ2PF8Iyv9ECN07V64nPCiJGhAnfENE+J9UD9Kw5czXHgZcBbpM5N0VfXmLSleaS65DDoNPtoStVy7ss=</Modulus><Exponent>AQAB</Exponent>4ScAjVrPZii/6lICAP2yDQiNEmNL74+5AcxNVDI0IombfDPIygrqEWmuDu0pngApQak7XnEnLbaDChILFiHPZQ==<Q>4FaYlse+cjrlPD/jk+GsTJeuP7yuQx8ztjVnQWVh6GKQP+uk1dAl6kcZOfLNR6LWwE3CSygt8PthTEw96Zbabw==</Q><DP>XvXtNLE9UjATqYeHEtXtV7Pok/3PVC3A8PIzFzTJaluxeXP51sU9rbRt1hvO9rXIsMnooU+GH7Cfmgq8JEyERQ==</DP><DQ>HXkC/vwq9xLpvuqd2XXSjxV2XQVK16Knxo5pjFvnawJX9S3eMADymj7Q/534firUj9snZXxX3MsJ015I3AFnnQ==</DQ><InverseQ>AM0fVCE3n2FKf2zb3CcDEge1Ko35VvMEL+LXgR87QwO2HScZSuLevGLi2SSAkB1vu8RSNzB028SZReeOZWnq4Q==</InverseQ><D>fI+GKdRNOTTYhQZnw8Im74T+OvArjf2wvUMJlqfD8jyDBYIhDCfL1MTK9KW4Er+moSuxHR5Pb0ZXaKa4/HKlk0aJ1jB2C+jg7zTSuPRNuS16BpVHaJYsQurCwZwElXMum+GxeXK/h3wXWq5HwebjqZr0aLUMZKRcweDPRoVFiRE=</D></RSAKeyValue>");
 $key =new Crypt_RSA_Key(base64_decode($public_key_string->Modulus),base64_decode($public_key_string->Exponent),"public");
 echo "<pre>";
 print_r($key);
 echo "</pre>";
 $rsa_obj = new Crypt_RSA();
 //try encrypt data
 echo "encrypted result is: ".$rsa_obj->encrypt("this is a smple text.",$key)
 ?>
but the encrypted data cann't decrypt by c#?where is the problem?what should i do with php codes?

thank you for your reply, i also found this article by google.but this does not meet scene, thank you all the same.
i have already solved the problem now,i'd like to post the Solution .infact it's so easy to use rsakey file generated by .net .
-------------rsa.class.php-------------------
Code Snippet
<?php
* Some constants
define("BCCOMP_LARGER", 1);
class RSA
* PHP implementation of the RSA algorithm
* (C) Copyright 2004 Edsko de Vries, Ireland
* Licensed under the GNU Public License (GPL)
* This implementation has been verified against [3]
* (tested Java/PHP interoperability).
* References:
* [1] "Applied Cryptography", Bruce Schneier, John Wiley & Sons, 1996
* [2] "Prime Number Hide-and-Seek", Brian Raiter, Muppetlabs (online)
* [3] "The Bouncy Castle Crypto Package", Legion of the Bouncy Castle,
* (open source cryptography library for Java, online)
* [4] "PKCS #1: RSA Encryption Standard", RSA Laboratories Technical Note,
* version 1.5, revised November 1, 1993
* Functions that are meant to be used by the user of this PHP module.
* Notes:
* - $key and $modulus should be numbers in (decimal) string format
* - $message is expected to be binary data
* - $keylength should be a multiple of 8, and should be in bits
* - For rsa_encrypt/rsa_sign, the length of $message should not exceed
* ($keylength / 8) - 11 (as mandated by [4]).
* - rsa_encrypt and rsa_sign will automatically add padding to the message.
* For rsa_encrypt, this padding will consist of random values; for rsa_sign,
* padding will consist of the appropriate number of 0xFF values (see [4])
* - rsa_decrypt and rsa_verify will automatically remove message padding.
* - Blocks for decoding (rsa_decrypt, rsa_verify) should be exactly
* ($keylength / 8) bytes long.
* - rsa_encrypt and rsa_verify expect a public key; rsa_decrypt and rsa_sign
* expect a private key.
* rsa encrypt data
* @param binary string $message
* @param unknown_type $public_key
* @param numbers $modulus
* @param numbers $keylength
* @return binary data
function rsa_encrypt($message, $public_key, $modulus, $keylength)
 $padded = RSA::add_PKCS1_padding($message, true, $keylength / 8);
 $number = RSA::binary_to_number($padded);
 $encrypted = RSA::pow_mod($number, $public_key, $modulus);
 $result = RSA::number_to_binary($encrypted, $keylength / 8);
 return $result;
function rsa_decrypt($message, $private_key, $modulus, $keylength)
 $number = RSA::binary_to_number($message);
 $decrypted = RSA::pow_mod($number, $private_key, $modulus);
 $result = RSA::number_to_binary($decrypted, $keylength / 8);
 return RSA::remove_PKCS1_padding($result, $keylength / 8);
function rsa_sign($message, $private_key, $modulus, $keylength)
 $padded = RSA::add_PKCS1_padding($message, false, $keylength / 8);
 $number = RSA::binary_to_number($padded);
 $signed = RSA::pow_mod($number, $private_key, $modulus);
 $result = RSA::number_to_binary($signed, $keylength / 8);
 return $result;
function rsa_verify($message, $public_key, $modulus, $keylength)
 return RSA::rsa_decrypt($message, $public_key, $modulus, $keylength);
function rsa_kyp_verify($message, $public_key, $modulus, $keylength)
 $number = RSA::binary_to_number($message);
 $decrypted = RSA::pow_mod($number, $public_key, $modulus);
 $result = RSA::number_to_binary($decrypted, $keylength / 8);
 return RSA::remove_KYP_padding($result, $keylength / 8);
* The actual implementation.
* Requires BCMath support in PHP (compile with --enable-bcmath)
// Calculate (p ^ q) mod r
// We need some trickery to [2]:
// (a) Avoid calculating (p ^ q) before (p ^ q) mod r, because for typical RSA
// applications, (p ^ q) is going to be _WAY_ too large.
// (I mean, __WAY__ too large - won't fit in your computer's memory.)
// (b) Still be reasonably efficient.
// We assume p, q and r are all positive, and that r is non-zero.
// Note that the more simple algorithm of multiplying $p by itself $q times, and
// applying "mod $r" at every step is also valid, but is O($q), whereas this
// algorithm is O(log $q). Big difference.
// As far as I can see, the algorithm I use is optimal; there is no redundancy
// in the calculation of the partial results.
function pow_mod($p, $q, $r)
 // Extract powers of 2 from $q
 $factors = array();
 $div = $q;
 $power_of_two = 0;
 while(bccomp($div, "0") == BCCOMP_LARGER)
 $rem = bcmod($div, 2);
 $div = bcdiv($div, 2);
 if($rem) array_push($factors, $power_of_two);
 $power_of_two++;
 // Calculate partial results for each factor, using each partial result as a
 // starting point for the next. This depends of the factors of two being
 // generated in increasing order.
 $partial_results = array();
 $part_res = $p;
 $idx = 0;
 foreach($factors as $factor)
 while($idx < $factor)
 $part_res = bcpow($part_res, "2");
 $part_res = bcmod($part_res, $r);
 $idx++;
 array_push($partial_results, $part_res);
 // Calculate final result
 $result = "1";
 foreach($partial_results as $part_res)
 $result = bcmul($result, $part_res);
 $result = bcmod($result, $r);
 return $result;
// Function to add padding to a decrypted string
// We need to know if this is a private or a public key operation [4]
function add_PKCS1_padding($data, $isPublicKey, $blocksize)
 $pad_length = $blocksize - 3 - strlen($data);
 if($isPublicKey)
 $block_type = "\x02";
 $padding = "";
 for($i = 0; $i < $pad_length; $i++)
 $rnd = mt_rand(1, 255);
 $padding .= chr($rnd);
 else
 $block_type = "\x01";
 $padding = str_repeat("\xFF", $pad_length);
 return "\x00" . $block_type . $padding . "\x00" . $data;
// Remove padding from a decrypted string
// See [4] for more details.
function remove_PKCS1_padding($data, $blocksize)
 assert(strlen($data) == $blocksize);
 $data = substr($data, 1);
 // We cannot deal with block type 0
 if($data{0} == '\0')
 die("Block type 0 not implemented.");
 // Then the block type must be 1 or 2
 assert(($data{0} == "\x01") || ($data{0} == "\x02"));
 // Remove the padding
 $offset = strpos($data, "\0", 1);
 return substr($data, $offset + 1);
// Remove "kyp" padding
// (Non standard)
function remove_KYP_padding($data, $blocksize)
 assert(strlen($data) == $blocksize);
 $offset = strpos($data, "\0");
 return substr($data, 0, $offset);
// Convert binary data to a decimal number
function binary_to_number($data)
 $base = "256";
 $radix = "1";
 $result = "0";
 for($i = strlen($data) - 1; $i >= 0; $i--)
 $digit = ord($data{$i});
 $part_res = bcmul($digit, $radix);
 $result = bcadd($result, $part_res);
 $radix = bcmul($radix, $base);
 return $result;
// Convert a number back into binary form
function number_to_binary($number, $blocksize)
 $base = "256";
 $result = "";
 $div = $number;
 while($div > 0)
 $mod = bcmod($div, $base);
 $div = bcdiv($div, $base);
 $result = chr($mod) . $result;
 return str_pad($result, $blocksize, "\x00", STR_PAD_LEFT);
?>
-------------RSAProcessor.class.php------------------------
Code Snippet
<?php
require_once("rsa.class.php");
class RSAProcessor
private $public_key = null;
private $private_key = null;
private $modulus = null;
private $key_length = "1024";
public function __construct($xmlRsakey=null,$type=null)
 $xmlObj = null;
 if($xmlRsakey==null)
 $xmlObj = simplexml_load_file("xmlfile/RSAKey.xml");
 elseif($type==RSAKeyType::XMLFile)
 $xmlObj = simplexml_load_file($xmlRsakey);
 else
 $xmlObj = simplexml_load_string($xmlRsakey);
 $this->modulus = RSA::binary_to_number(base64_decode($xmlObj->Modulus));
 $this->public_key = RSA::binary_to_number(base64_decode($xmlObj->Exponent));
 $this->key_length = strlen(base64_decode($xmlObj->Modulus))*8;
* get public key
* @return string public key
public function getPublicKey()
 //return base64_encode(RSA::number_to_binary($this->public_key,($this->key_length)/8));
 return $this->public_key;
public function getPrivateKey()
 //return base64_encode(RSA::number_to_binary($this->private_key,($this->key_length)/8));
 return $this->private_key;
public function getKeyLength()
 return $this->key_length;
public function getModulus()
 return $this->modulus;
* encrypt data
* @param string $data
* @return base64 encoded binary string
public function encrypt($data)
 return base64_encode(RSA::rsa_encrypt($data,$this->public_key,$this->modulus,$this->key_length));
public function dencrypt($data)
 return RSA::rsa_decrypt($data,$this->private_key,$this->modulus,$this->key_length);
public function sign($data)
 return RSA::rsa_sign($data,$this->private_key,$this->modulus,$this->key_length);
public function verify($data)
 return RSA::rsa_verify($data,$this->public_key,$this->modulus,$this->key_length);
class RSAKeyType
const XMLFile = 0;
const XMLString = 1;
?>
-------------- encrypt data with public key-----------------
Code Snippet
<?php
require_once("RSAProcessor.class.php");
$processor = new RSAProcessor
("<RSAKeyValue><Modulus>m6ljoeWhmnd0oRnsVEH5iNw3B8+vKVu7v7CVfMyf6bnKEzHa62TRmT/baJiSevoI/vgm2ph/s1JrQQTaGiErHicigwSC
Aw7+i05WFbnz7tOyiiJJVMfsdd+v7Xan9Hiud05FzxoMbM8vpiMHPEIDbGJ1MiXyupTVkz2WcMHyBoJ4S189opktZ43pviUhy0PeuWkyoU7zR54akPmK
Yg+z5Zr1r7K8lUZ1a3TThfJGxTQR/uZMtZz/q8QF0AANVQ/eyahTv9icBzBoDuncS0Y5l3vqogW1C/ltJvhJpvSn/OgjbRjuixCAptOUmRd13sDWU95/
x0bMq+Lg68lj2OjJ1Q==</Modulus><Exponent>AQAB</Exponent>zfvdBsMLlmo+4PAUYLgSV2xyyVa7ZqFjkJaAE4EbYuH24EoZjrzeiJR++D
FUT/GUhjfZ5eZ/5e29dXwk0sKUw6nHzBdBtOPp5fr4t5SKLEcWY+J+zLUSOlhG9NUkohFf6+Miy2Y7BLpXVrcl6UwXV0ak8KkTPB2l/aIMwYj5dgc=<Q>wXV0sA3nDzoSDQA/4QSu/WIlBhkA3jZ7K7G9Z9rpP1A0vH+bZeyCIyo52u8ahGuYbubaizF1XMp+Xv3Mh2KmRbt7+UptwEwbFAUiiad2a312mqm
j7IJd7gRjGkyzKEm+6fpNeY3NFLNVNhccBqzhNkRoM22xnvQcImD10XVAakM=</Q><DP>wd1HdCLEWCfc0DYE59a2pINUMXyo2foRTDbpifHcRZ+ojAY
Rsc6+nsssCQnccXVMNVqBgSgEvfGYe+eAfMBX5SN5APPuioJrVGF2DsoFlZC+WPoGH0JYSoNlHO8yEDrMDaXzzH2GFHgQ1XOAged0nFbHzB1FFjJNVL5
cxRXWu6c=</DP><DQ>QDKuCk5SwubOXqoaiJ15RHRxPNjHRPZnYVSWOgSXKn9/QJ5H/0bA2NKGaHS4JAFgkEzjcRV0kNpRnUwztymxa6qPtWZRjWK0Ca
y6jVuZHIqB9UkeMLoCWZ3zFSMmwNPYGuUJGLFJwPjR6iU5E64C/nMs8QQR0WHIhFAQwvVZ7uk=</DQ><InverseQ>JckMSlJR10VZdnp83VPjrZ/Z+63
CGu3tWHm7f4DJ8IwjJWr8FlCpbSwiP6a4e9Upv6bUn/tOj2gY6MMq5G5yTKm2SCRvpUKRu4NCmWAt7vlFv0Z6pkXlTOpzvVjv3v16+dIZOA5Zn+v7+r1
xbdYdH20KRAbiBO3MfQP7s+VJJvM=</InverseQ><D>W1xrBr2hQOj1wgxWAgoK7IHbprEFrK+TnWmGA46SGPsbmHJ9fAVbY6fwHg7Wgmk4WHXLUCeLY
/Nu0eWIISfwh60Oe3ls2WC2k4qxyeSvQDBuLNb81U7WAUT9m9E1uK4QMCP3oxs1ybM80zTh7UMNgVK0WG+fbFUomVffcWTTqW+Fu12PEIO+UR/85oq+x
qVlTzYAEzt1OE9IhkYiRzi99ePXeH2gFltzJ/fb/7jLsDTkhM2eiYTGyOTZmBnen6c6a8b9LFTY4Bc0bGpk5ezHkub6F8p2ZgL/JgIOJMyRZICjDjs+9
k9PTmMTFsCF6xzHY15Fg25xIDYzIyx1rrRUjQ==</D></RSAKeyValue>",RSAKeyType::XMLString);
$rs = $processor->encrypt("Hello,It's Works.");
echo $rs;
?>
with the front codes.you can easy to encrypt data by public key generate by .net programe.

With Pages 5.2 how can i use multiple language types in a single document

My Macbook Air Has the version 10.9.3
I'm used to work with the old version of Page.
But now I am using the new version of Pages 5.2 (1860).
I want to know with the new version how do I use an multiple language types in a single document option.
In the old version of Pages I was using Inspector -> Text -> "More" tab -> Language: British Inglese.
In the new Pages 5.2 I do not know how to do it
Could you help me?
melo

It's not possible to tag text with multiple languages in Pages 5. Go back to Pages 4, which should still be in you iWork folder.
For the whole doc in Pages 5, use Edit > Spellling and Grammar > Show Spelling and Grammar.

How can I use the Concentric Shape Generator in Motion to create a graphic?

Hi,
"Concentric Shapes generator
The Concentric Shapes generator is used to generate patterns derived from circles or from polygons ranging from 3 to 100 sides. Choose two fixed colors or set up a flexible multicolor gradient."
(taken from http://www.apple.com/finalcutstudio/whats-new.html)
I would really like to utilise this feature to create some graphics I need to create but I cannot find how to do this. Can anyone point me in the right direction? A tutorial perhaps...? I have looked and looked.
I basically wish to have a triangle shape increasing in size over and over again in two-tone colour.
Many thanks,
Philip
Message was edited by: Host (to clarify subject?

Not entirely sure what look you're going for, but here's an example:
(clicking on the image will download the project).
Is that what you're looking for?
Patrick

How can I use the Adobe reader if the PDF documents are in iBooks?

The Adobe reader asks me to look for an "Open in" button but iBooks does not appear to have one. I like IBooks because it synchronises nicely with the computer, and I can read the PDFs but I cannot highlight, add comments or add bookmarks unless I use the Adobe reader.

Use iTunes to save the PDF FROM iBooks, and to add them to Adobe Reader.
Connect your iPad to your computer. Bring up iTunes on your computer.
To save a PDF FROM iBooks, click on "Books" in the Library section on the left. Select the PDF you want to save and right-click and choose Show in Finder (Show in Explorer in Windows). Go up one level in your computer hierarchy and you'll see all the "Books" (PDFs and eBooks) in iBooks. You can leave them here if you want to view the PDFs in iBooks in the future, or drag them to the Desktop.
To move the PDF TO Adobe Reader:
Return to iTunes. Click on the iPad on the left in Devices. Click on the Apps tab. Scroll down the the File Sharing section as shown below. Click on Adobe Reader. Click the Add button and select the PDFs you identified in the previous step. They'll be added to Adobe Reader

How can I use sequences in BC4J

Hello!
I read in BC4J documentation about how can I use database sequences to generate next value with BC4J. My question is:
If I don't want to use DB seq what can I do? We have DBSequence class. I look into it and see there not only a DB seq allowed.
Can anybody help me? I don't want to use DB sequences.

Don't quite understand the question. If you don't want to use DB sequences, then just override the create() method in your entity object and use call a setter method to set the attribute ID to what you want if you want to do this in an "eager" way that the user would immediately see in a newly-created row...
...or you can write code in an overridden prepareForDML method if you want to set a value for one or more attributes just before the changes are posted to the database.

How can we use "tooltip " option in heirarchical tree item in oracle 11g?

how can we use "tooltip " option in heirarchical tree item properties in oracle 11g forms?

hi user11973188
how can we use "tooltip " option in heirarchical tree item properties in oracle 11g forms?isn't it exist in the tree item's property itself... ?!
Regards,
Abdetu...

How can I use zoom while recording on my iPhone 4S?

How can I use zoom while recording on my iPhone 4S?

Christina_319 wrote:
How can I use zoom while recording on my iPhone 4S?
You can't change the zoom while recording.

How can I use USRP as a noise generator?

Hi everyone.
Does anyone know how can I use a NI USRP 2920 to generate white noise or impulsive noise at its Tx port?
(I am kind of new to this area and any help is appreciated)
Thanks.

Hello,
I am assuming you are using LabVIEW to do this, correct? DO you have access to the help documentation for the NI-USRP driver? Within the help document there is a section called Software Fundamentals which has a section within it called NI-USRP Instrument Driver Programming Flow. This section shows you how to set up the USRP to transmit a signal. The default case is for an arbitrary array of data to be supplied to the Write Tx Data function. Instead you could use the output from the Uniform White Noise VI as the input for the Write Tx Data function. This should write the the white noise to the output of the USRP.
NI-USRP Instrument Driver Programming Flow:
http://zone.ni.com/reference/en-XX/help/373380A-01/usrphelp/programming_flow/
Uniform White Noise VI:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvanls/uniform_white_noise/
I hope this helps.
Thanks,
Cameron T
Applications Engineer
National Instruments

How can i use a xsd while generating my xml document in oracle?

Similar Messages

Maybe you are looking for