How can I use both endnotes and footnotes in the same document?

My project requires that the document have both kinds of notes. Thanks.

You may have to split the document into 2, one for each as they seem to be an either or option.
Peter

Similar Messages

How can I use both Lion and Leopard on the same computer?

I have installed Lion and can't recover documents created by Canvas 9, a PPC app. Can I create a partition to run Leopard, so that I can use PPC apps?

My mid-2010 iMac 27" i3 came with Snow Leopard. My internal hard drive is partitoned into 3 parts - one boot volume for Snow Leopard (10.6.7); one boot volume for Lion; another boot volume for Lion. The two Lion partitions were added to the internal drive without erasing the initial install of Snow Leopard.
I also have an external firewire drive which is partitioned into three volumes: one with a clone of the primary's Snow Leopard 10.6.7; one with Snow Leopard 10.6.8 (built on another clone of the primary); and one used for GP file storage.
That gives me three bootable volumes for Snow Leopard (two of 10.6.7, and one of 10.6.8) and two bootable volumes for Lion. All of those are, in fact bootable - they have all been tested for that by booting to them.
Booting to a different valid OS on a different volume is as easy as going to System Preferences > Startup Disk and then selecting the OS/volume one would like to use on the next restart. Then just restart.
The choice can also be made at booting - as soon as the startup chimes sound, hold down the Option key to bring up Startup Manager. In that screen select the boot volume of choice.

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Can I use both cs and cc at the same time?

Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
Regards
Kasper

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Can I use both iPhoto and Aperture on the same library?

I like some of the features of iPhoto (like faces and places) but prefer to work in Aperture for its rich tool content. Is there any way I can use both iPhoto and Aperture on the same library? Or, import images from Aperture into iPhoto?
Thanks much!
John

I think you may have answered a question I have with the above, but to be sure here is what I would like to do. I currently have iPhoto09 with about 50,000 pictures in it, which seems too much for it to manage. I would like to use Aperture, which I understand is better for managing a large number of photos, but still have iPhoto available to make slide shows, etc. for our AppleTV. Would the process you described above work for that?
Thank you

On my wireless printer can i use both usb and wireless at the same time

i tried to print from coupons,com but it will not i have used coupons.com before with my other printer and weorked fine i have coupons.com looking into it
just wondering if anyone else out there have the same problem

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I use two different page orientations in the same document?

I am trying to have both portrait and landscape page orientations in the same document. Pages doesn't seem to like this. Is there a way?

I tried to comment on another thread about this same issue, but the thread was closed.
In the other thread; however, some asked why rotating one pages was necessary, and if they knew then maybe there would be reason to create the function.
Well, I don't know about why anyone else needs it, but for me it's for the papers I have to write for my masters program. The professors like to have the rubric attached to the bottome of the document so they easily grade and keep things organized. They of course give directions on how to easily change the orientation of the last page in Word, but not all of use Word, or even want to use Word. Maybe I need to ditch Pages and go to Word? I'd really hate to do that!
So, come on Apple, let's get this feature added, stat!

How can I run both Leopard and Panther on the same machine?

Hi,
I currently have a Powermac G5 with Leopard running nicely on it. I have 2 hard disks.
What I would like to do is install OS X 10.3 on the machine so that I can switch between the environments - please can someone explain how to do this?
I'm assuming I need to partition one of the hard drives and have done with the second hard disk (not the startup disk), but I'm nervous about what to do from there and really don't want to mess up what I've already got - please help!!
Many thanks.

if you have two hard drives the easiest might be to install panther on the second hard drive. this way you don't have top partition anything. make sure the drive is properly formatted it should be formatted mac os extended journaled with APM partition scheme. then just boot from the Panther install disk and install panther on the second drive. note that this will only work if your mac originally came with panther. did it?
to switch between installs you can change the startup disk in system preferences->startup disk. then reboot. alternatively, reboot normally and hold option at the chime. this will boot you into startup disk manager where you can choose which drive to boot from.

How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

You have to select one or the other.
Try making two documents and see if you can merge the .pdfs, but their will be problems with page flow, making the pages shift. Can't see it working really.
Pages is not the only solution out there or the best for most jobs (let alone the safest). Try Word for Mac, LibreOffice (free) or any App that has the features you need.
Peter

I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

Try one of these extensions for multiple cookie sessions.
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

How can i use both Windows and Mac os at the same time on my iMac

How can i use both Windows and Mac os at the same time on my iMac

You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells, find the 10 lowest numbers, then get the average and after that multiply it by .96

I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells in a column, find the 10 lowest numbers, then get the average and after that multiply it by .96 I used to use Excel and the formula worked fine in that. Here is my Formula
=(average(small(H201:H220,{1,2,3,4,5,6,7,8,9,10})))*.96
This formula worked in Excel and when I converted my spreadsheet over to Numbers, this formula no longer works.
The best that I have been able to do so far is use small in 10 different cells, then get the average of the 10 cells and finally multiply that average by .96 So instead of using 1 cell, I'm using 12 cells to get my answer.
This is a formula that I will be using all the time. The next cell would be =(average(small(H202:H221,{1,2,3,4,5,6,7,8,9,10})))*.96
Hoping I explain myself well enough and that someone can help me.
Thanks

You can still do it in one cell but it will be more unruly than the Excel array formula.
=average(small(H201:H220,1),small(H201:H220,2),small(H201:H220,3),...,small(H201:H220,10))*0.96
where you would, of course, replace the "..." with the remaining six SMALL functions.

Can we use Badi BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time

Hi everyone,
We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario?
We want to create the contract in ECC, and then we want to return the SC in SoCo in order to create the PO with the SC and the contract.
We activate both, but the SC is not returned in SoCo.
Thanks,
Ivá

Hi Ivan
You can use both badi to change srm standard behavior.
but one shopping cart item and it can have only one follow on document either Contract or Purchase order.
i presumed that you want to use same sc for two purposes to create both SC and PO but it is not possible.
for example
shopping cart item has follow on document created as a contract But you need to create a another shopping cart to create a Purchase order w.r.t that contract .
Once follow on documents are created sourcing flag will be removed .- rule
BBP_SOURCING_BADI - you can write your custom logic and make way to cockpit .
BBP_DETERMINE_LOGSYS - Determine your logical system.
Muthuraman

Can I use Time Capsule and LaCie at the same time?

Can I use Time Capsule and LaCie at the same time?

stephaniefromarlington wrote:
Before I answer your questions, let me first just say thank you so much for your amazing patience and helpfulness. Whether or not we get to the bottom of this, I am very, very grateful to you.
We will get to the bottom of it, and you're quite welcome. Don't feel you ought to know all this stuff -- none of us were born with it!
By the way, in answer to your original question, yes, you can use the Time Capsule while backups are running. There's no conflict at all.
1) Estimated size of full backup: 205.94 GB
2) My LaCie has available: 11.04 GB of 359.95 GB
That's part of the problem right there; 360 GB is a bit small to back up 206 GB. Ordinarily, a Time Machine drive should be 2-3 times the size of the data it's backing-up, so Time Machine can keep a reasonable "depth" of old backups for you.
It looks like Time Machine is trying to do a fairly large backup, and there just isn't enough room for it.
But something doesn't quite add up. Time Machine should have deleted all but your most recent backup, trying to make room for the new one. But that would mean there should only be a bit less than 206 GB on the disk, not 360.
A clue may be lurking in your logs. Use the widget in #1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.

How can I use both endnotes and footnotes in the same document?

Similar Messages

Maybe you are looking for