How can I write unit tests for BizTalk Maps with multipe inputs?

I want to bring all my maps under unit test coverage, but can't seem to find a way to test maps with multiple inputs. Maps with multiple inputs are first merged into a single schema by biztalk and then the map actually uses that inline schema as source.
What I tried is- produced a generated instance of source schema by clicking "Test Map", and then modified the skeletal instance by stitching together the multiple input files into it. There are two problems I am facing going forward that way- 1#
It takes a lot of time to craft a mock input of inline schema and 2# the mock input fails input validation although the input works just fine in the orchestration.
So is there a better or standard way to test such Maps?

For testing maps with multiple inputs, follow the below steps-
Lets assume you have a map with two input schemas A and B and output as C.
1) To create the required schema just reverse the inputs i.e. make a map with C as input and A & B as output. Later do a test map. This will generate an XML File with schemas A & B.
2) Now you just to need to replace OutputMessagePart_0 to InputMessagePart_0
and OutputMessagePart_1 to InputMessagePart_1
Later you can use this xml for testing your original map.
Refer the below article
Developing and Testing Maps which have Multiple Source and Destination Schemas
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Similar Messages

How can we write the code for opening the command prompt and closing the

how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

How can i write the trigger for Global Temporary Table

Hi Grus,
How can i write the trigger for Global Temporary Table.
I was created the GTT with trigger using the below script .
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
trigger was create successfully, but the wouldn't insert into to EMPNAME Table..
Please guide whether am correct or not? if not kindly give a correct syntax with example
Thanks in Advance,
Arun M M

BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
you are referencing old value in insert stmt.
BEGIN
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
END;then run ur application it works fine...
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
dbms_output.put_line(:OLD.EMP_C_NAME||'yahoo');
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
dbms_output.put_line(:OLD.EMP_C_NAME);
END;
create table EMPNAME as select * from GLOBAL_TEMP where 1=2
insert into GLOBAL_TEMP values('fgfdgd');
commit;
select * from GLOBAL_TEMP;
select * from EMPNAME;
output:
1 rows inserted
commit succeeded.
EMP_C_NAME
fgfdgd
1 rows selected
EMP_C_NAME
fgfdgd
1 rows selectedgot it Arun
Edited by: OraclePLSQL on Dec 28, 2010 6:07 PM

How can I purchase FormsCentral premium for my organzation with a purchase order?

How can I purchase FormsCentral premium for my organzation with a purchase order?

Hi;
A FormsCentral subscription purchase requires a credit card in one of the supported countries for purchase. It cannot be purchased using a purchase order, only a credit card.
Thanks,
Josh

How can I write a script for set left indent?

In three cases as below:
for example:
left indent:8mm; first indent:0mm
left indent:0mm; first indent:8mm
left indent:8mm; first indent:-8mm
How can I write a script to tell Indesign, wherever the text indent is, each time when I run the script once, the text can put just a step rightward, and “one step = 8mm”.
Please!

Hi, Trevor
I use change by list as below:
grep {leftIndent:48mm} {leftIndent:56mm}
grep {leftIndent:40mm} {leftIndent:48mm}
grep {leftIndent:32mm} {leftIndent:40mm}
grep {leftIndent:24mm} {leftIndent:32mm}
grep {leftIndent:16mm} {leftIndent:24mm}
grep {leftIndent:8mm} {leftIndent:16mm}
grep {firstLineIndent:8mm, leftIndent:48mm} {firstLineIndent:8mm, leftIndent:56mm}
grep {firstLineIndent:8mm, leftIndent:32mm} {firstLineIndent:8mm, leftIndent:48mm}
grep {firstLineIndent:8mm, leftIndent:24mm} {firstLineIndent:8mm, leftIndent:32mm}
grep {firstLineIndent:8mm, leftIndent:16mm} {firstLineIndent:8mm, leftIndent:24mm}
grep {firstLineIndent:8mm, leftIndent:8mm} {firstLineIndent:8mm, leftIndent:16mm}
grep {firstLineIndent:-8mm, leftIndent:48mm} {firstLineIndent:-8mm, leftIndent:56mm}
grep {firstLineIndent:-8mm, leftIndent:32mm} {firstLineIndent:-8mm, leftIndent:48mm}
grep {firstLineIndent:-8mm, leftIndent:24mm} {firstLineIndent:-8mm, leftIndent:32mm}
grep {firstLineIndent:-8mm, leftIndent:16mm} {firstLineIndent:-8mm, leftIndent:24mm}
grep {firstLineIndent:-8mm, leftIndent:8mm} {firstLineIndent:-8mm, leftIndent:16mm}
but not that perfect,
I want to useing jave "if{}" or "for{}" to write this script, but I don't kown the syntext.

How can i write properties file for Hindi font

Hi All,
i'm using jdev 11.1.1.5.0
in my use case i have worked on internationalization where i want to use hindi font
like this link -
Majid Hussain: Internationalization of ADF 11.1.1.3 Applications
as in above post majid used german language and write properties file for german language(which is using english character).
but my problem is that i want to use hindi language
so how can i write propery file which support hindi font.
Manish

Hi Manish,
We also had same requirement where we need to show indian local language(Hindi ,Bengali and many more ).
We had implemented following approach and perhaps it will helpful for you.
1-First we changed the encoding value in jdeveloper.
go to jdeveloper --> tools --->preference-->encoding , select to UTF8
2-We used to get the properties and it's translated value from business and then we were manually put these pair into related resource bundle.
And using this we were able to implemented multilanguage support.
Thanks
Prateek

How Can I write a script for change first indent?

How can I write a java script to tell indesign:
what ever the text first indent is, I want to change first indent =
1) 8mm
2) 0mm
3)-8mm (if left indent is 0, change the first indent to 8mm, and then change first indent = -8)
3 scripts
Please someone help me, please!

Hi hasive, thank you for your responses, thank you very much,
I need three scripts
1st script, I want to set the first indent to 8mm;
2nd script, I want to set the first indent to -8 mm, but if the left indent is 0, please set the left indent to >8mm then set the first indent to -8mm;
3rd, I want to set the first to 0mm, if the first indent is 8mm or -8mm;
thank you
Harvey

Flash Builder 4.6 - How can I keep unit test classes out of the finished swc?

I have a library of code I'm building and I'm working on unit testing but I have a major issue. When my finished swc compiles no matter what I do it includes the unit test classes as part of the intellisense if you load the swc via flash. The classes aren't really in the swc since if you just try and import them they'll come up undefined. They only appear to go into the intellisense for the swc. Does anyone know how can I keep this from happening in the finished source? Currently my folder setup is like this in flash builder.
src\main - source documents for the library to get compiled
src\mock - mock class area for unit testing
src\test - unit test classes
In the project Properties panel > the first tab of my Flex Library Build path I have selected only the src\main folder for the classes to inlude in the library. No other folder paths are selected.
The "Flex Library Build Path" doesn't change my results with any setting.
Thanks,

Mel Riffe,
Here's a Help topic about compiler options in Flash Builder: http://help.adobe.com/en_US/flashbuilder/using/WSe4e4b720da9dedb524b8220812e5611f28f-7fe7. html
For information on using mxmlc, the application compiler, to compile SWF files from your ActionScript and MXML source files, you can see: http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7fcc.html
Hope this helps,
Mallika Yelandur
Flash Builder Community Help & Learning
Adobe Systems Incorporated

How can i display units only for the result set

hi
i do not want to display units (example: $ or %) for my key figure columns but i want to display units to the result.
how can i do that

Hi Surya,
I don't think it is possible to have both non-unit and unit in the same kf.
One potential workaround to do this is to create a calculated key figure/ formula that use the NODIM function for single values. Example: NODIM(0AMOUNT). Then, create a calculated key figure/formula that computes overall result on the same kf and supresses individual values but does not use NODIM....perhaps this can help you work out a solution.
Hope this helps.
Regards,
Petter
Message was edited by: M Petter

How can I write VISA in labview to communicate with instrument using RS485

my instrument has a Modbus communication procotol, how can I use VISA write or read to communicate with the instrument? Thanks!

RS485 is simply a physical-layer protocol defining pinouts, signal levels and the like. To make the connection you need either an RS232-RS485 converter (check with BlackBox) or an RS485 serial IO card (check with NI). Either way, there should be no changes required to you Modbus drivers or other software.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How can i disable the location for the camera with ios 6? since the update i cannot find out how to do this. i always have locations for my camera disabled for safety reasons. please help!

Please help! I upgraded to ios 6 today and I cannot find out where to disbale the location for the camera. I DO NOT want my pictures to be geotagged or have any type of location marked on them for safety reasons. Does anyone know how to disable it? Please help and thank you!

Bro try Setting then scrool down choose privacy then you find location service there you can turn off location service for camera. Gbu

How can I enter "Flate rates for travel costs" with more than 2 decimals?

Hi expert,
I want to enter flat rates for travel costs in table T706F.
I have a figure with more than 2 decimals (0,066), but I cannot save it, because only 2 decimals are allowed for EUR.
I don't want to change the decimals for this currency.
I found OSS note 446116 which is release independent. It is a note of 30.10.2001.
It suggests to create a new currency e.g. EUR3 and enter translation ratio's and exchange rates.
This seems pretty drastic.
Do you know if there is another way to handle this issue?
Thank you.
Kind regards,
Linda Verding

Hello Christian,
I have checked it with consultants from SAP Brussels.
They confirm that OSS note 446116 can be used to create flat rates for travel costs with more than 2 decimals.
I will create a new currency (EUR3) with the description "for travel expenses only".
Kind regards,
Linda Verding

How can I write on ports (COM and LPT) with java APIs

I need to write in LPT and COM ports with Java like the INP and OUT commands on other languajes, but I don�t want to use native classes... because I want a portable code... so what can I do?

look at the javax.comm package
http://java.sun.com/products/javacomm/javadocs/tree.html

How can I write a 1d array of cluster with 3 elements to a file?

Hi,
I have to make a "Power spectral densities" analyse from my waveform data. The results from this VI is an array of cluuster with 3 elemments. Now I want to write this array of cluster with 3 elements to a file. And later it must be able to use this file with EXCEL!!
thanks

Hello schloronzo,
make a for loop feeded with your array. Inside the for loop unbundle
the cluster, "format into string" the 3 values, adding the result to
the ones before and collect them in a shift register. Then save the
resulting string to a txt-file. If you make a good format string then
Excel is able to read your txt-file (use tab a separator and CR/LF
after each 3 values aka "csv format").
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can I get the output of graphical mapping as an input to java mapping?

Hi Experts,
I am using graphical mapping in my scenario to get an xml at the end, now after this i want to use java mapping and then do encryption on this input. I am using both the mappings in the same interface
Here the thing is, the input to the java mapping should be the output of the first graphical mapping.
How can I link the java mapping and graphical mapping so that Ill get the output of the graphical mapping as the input to the java mapping?
Some pointers to similar kind of implementations is highly appreciated.
Thanks in advance,
Thomas
Edited by: Thomas Varghese on Jan 22, 2009 11:35 AM

hi,
the input to the jave mapping will be exaclty the same as if you don't have
any mapping before that
the only different is that the input will be XML of the output of the message mapping
have a look at my blog to see how to combine two mappings:
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
that's all
Regards,
Michal Krawczyk

How can I write unit tests for BizTalk Maps with multipe inputs?

Similar Messages

Maybe you are looking for