How can learn the very basics of Pixelmator?
How can I learn the very basics of using Pixelmator? I have no graphic arts experience beyond WOrd Art which I've used to design t-shirt graphics. Although I had been encouraged to by Photo Shop, I wanted a smaller $ step into graphics art and was introduced to Pixelmator.
But I don't even know enough about how to start creating my ideas....e.g. how to even create artful text...... Pixelmator has a good learning site, but all of their tutorials seem to assume a basic knowledge of this kind of software.
My sister suggested I try to hook-up with a tutor through an Apple Forum....
Suggestions please?!
The folks at PixelmatorTutorials.net have in my opinion the best tutorials to date for those who want to learn image editing. They have a series of tutorials called back to basics and these go into the details of image editing. Explaining everything from what a pixel is, to how it gets its color etc. They also explain the app itself in detail. I'd recommend following them. They usually pubilish 1 to 2 tutorials a week. They have some handy tips in every tutorial I watched so far. Like shorcuts that I never knew existed and are not even mentioned in the Pixelmator manual.
The link: http://pixelmatortutorials.net
Good luck.
Similar Messages
-
Need to learn the very basics on getting started
Hi, I just got home with my super new iPad Air Wi-Fi + Cellular and have completed all the setup questions. After entering my password I get the initial screen with standard apps but when I tap any of them nothing happens. Battery is fully charged and in the top left corner it shows 'No SIM and the Wi-Fi symbol. I hope this is me just being a bit dumb and would appreciate some advice.
Thanks.Looks like I neglected to post the link: http://help.apple.com/ipad/7/
As to your questions: Google apps will not run on an iOS device. You must download then from the app store. No exceptions. Alternately, you can download them to itunes on a computer and sync to the iPad.
As for troubleshooting the App store issue, try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset. -
I have just purchased a new iPad from apple and I don't know how to use it. is there somewhere that I can learn the basics
Out of a silly curiosity, in what way did Ralph's reply solve your problem? (not that Ralph doesn't deserve recognition, mind you.)
-
How to learn MM module basics and SD module
Hi all,
As abapers you all need some basic knowledge of the modules, for example I need the info of the modules MM and SD, because I generally get works from these two module and I do not know much on them...
How to learn these modules basics without having to any course?
Could you please provide me documents if possible; my email is : [email protected]
Thank you very muchHi Deniz,
Process Summaries
Create Sales Order
1. Use Transaction Code VA01
2. Identify Sales Office
3. Enter Sold-to-party (customer) and purchase order number and date if applicable
4. Enter material, quantity and rate
5. Credit income to account (Internal Order or WBS element)
6. Enter partner (University contact details)
7. Save Sales Order
Create Billing Document
1. Directly after saving the Sales Order, follow the path Sales document> Billing.
2. Save the billing document
Other than as a follow-on function
1. Use Transaction Code VF01
2. The sales order number will default in check that it is correct
3. Save the Billing document
Print a Billing document immediately
1. Use transaction code VF03
2. Enter the Billing Document number.
3. Follow path Issue Output to > Printer
4. Click on execute twice
5. To preview, follow the path Issue Output to > Screen and click on execute twice to view
Document Flow
1. Use transaction code VA03 (Sales Order/Credit Memo or VF03 (Billing document) or
2. Follow the path Environment > Document Flow
3. Enter the document number
4. Click on the document overview icon
Common Transaction Codes
Access to transactions is limited by your security profile
For easier access, add transactions to your favourites folders
Create Sales Order VA01
Create Credit Memo VA01
Change Sales Order VA02
Display Sales Order VA03
List Sales Order VA05
Create Billing Doc VF01
Display Billing Doc VF03
Cancel Billing Doc VF11
Print Billing Doc VF03
Display Customer XD03
Display Material MM03
Display Customer Line Items FBL5
Document Structure
Numbering Range
80000000 89999999 Sales Orders
90000000 99999999 Billing Document
60000000 69999999 Credit Notes
800000 899999 Customers
2000000 - 2999999 Materials
for any further info check this link
http://www.leeds.ac.uk/iss/infosystems
Hope this helps u..
Reward points if useful..
Regards,
Sreenivas -
How to learn the Business Process and how it is related to BI?
Dear Experts,
How to learn the Business Process? for example the business process from finance to sales. As I am more involved in technical development of BI; I dont know or having very hard time to understand what the business process. And how the Business Process is related to BI?
I think if I don't understand the business process than it is very hard to satisfy the User requirements. If you have any documentation please feel free to forward it to [email protected]
I wish you happy new year. Thank you in advance.
Aslam.If only plan data entered, try to delete the planning data before delete the object and then re-create it again. Otherwise you may have to leave it as is and change the description for the usage by the different company code.
-
How can change the font in the script output and the data grid ?
How can change the font in the script output and the data grid in Sql Developer?
You can't easily unless you have the latest version (2.1.1).
If you do have this version then changing the font in the Tools/Preferences menu under the code editor/fonts section will also change the font of the data grid.
For details of changing the fonts in an earlier version then see Sue's post below.
http://sueharper.blogspot.com/2010/03/back-to-basics-changing-font-setting-in.html -
Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?
You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway... -
How can i download visual basic on mac??
how can i download visual basic on mac?
Not download and run on OS X. You can run Windows on your computer via Boot Camp or using virtualization software like Parallels. But MS does not have a Mac compatible version of VB
There are third-party Basics for OS X, however they are not VB. The closest to VB is probably REAL Basic.
OS X's own programming environment is XCode which is a free download via the App Store. It is a development environment that uses C as the compiler language. XCode is a visual development environment, too. -
Hi there,
I was using MacPro with older snow leopard just now i install OS X LION,before install i backup all deta to time machines about 70GB,now when i connect i dont know how can backup the old deta to OS X LION,but it just backup the recent deta to time machine,pls guide me how i can backup my old deta to my computer??
Will be much appreciated !!
Thanks.>Step 1. Backup existing data using time machine.
Time Machine is nice, but you have very little in terms of ability to verify that your data is all backed up. I find Time Machine is better for the occasional recovery of previously written data at specific times. A good backup solution that survives an erase and install (there is no clean install in Mac OS X), is a clone, and preferably TWO clones. See my FAQ*:
http://www.macmaps.com/backup.html
Time Machine can work as good as a clone, and in fact I once had to rely on it because my hard drive died. Thankfully it did recover everything. But I had my clone just in case it didn't work. Now I feel more comfortable since clones allow you to boot themselves, and thus prove all the important system information got saved, and not just the user data.
Clones are also easier to import with the migration assistant. -
How can avoid the problem of Parameter Prompting when I submitting ?
I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
1. using System;
2. using System.Collections;
3. using System.Configuration;
4. using System.Data;
5. using System.Linq;
6. using System.Web;
7. using System.Web.Security;
8. using System.Web.UI;
9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22. CrystalReportViewer crViewer = new CrystalReportViewer();
23. //CrystalReportSource crsource = new CrystalReportSource();
24. int nItemId;
25.
26. protected void Page_Load(object sender, EventArgs e)
27. {
28. //Database Connection
29. ConnectionInfo ConnInfo = new ConnectionInfo();
30. {
31. ConnInfo.ServerName = "127.0.0.1";
32. ConnInfo.DatabaseName = "Xcodf";
33. ConnInfo.UserID = "HR777";
34. ConnInfo.Password = "zghshshs";
35. }
36. // For Each Logon parameters
37. foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38. {
39. cnInfo.ConnectionInfo = ConnInfo;
40.
41. }
42.
43.
44.
45.
46.
47.
48. //Declaring varibles
49. nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50. //string strStartDate = Request.QueryString.Get("StartDate");
51. //int nItemId = 20;
52. string strStartDate = "23-JUL-2010";
53.
54. // object declration
55. CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56. CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59. TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61. // new report document object
62. ReportDocument oRpt = new ReportDocument();
63.
64. // loading the ItemReport in report document
65. oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67. // getting the database, the table and the LogOnInfo object which holds login onformation
68. crDatabase = oRpt.Database;
69.
70. // getting the table in an object array of one item
71. object[] arrTables = new object[1];
72. crDatabase.Tables.CopyTo(arrTables, 0);
73.
74. // assigning the first item of array to crTable by downcasting the object to Table
75. crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77. dbConn = crTable.LogOnInfo;
78.
79. // setting values
80. dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81. dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82. dbConn.ConnectionInfo.UserID = "HR777";
83. dbConn.ConnectionInfo.Password = "zghshshs";
84.
85. // applying login info to the table object
86. crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93. crViewer.RefreshReport();
94.
95. // defining report source
96. crViewer.ReportSource = oRpt;
97. //CrystalReportSource1.Report = oRpt;
98.
99. // so uptill now we have created everything
100. // what remains is to pass parameters to our report, so it
101. // shows only selected records. so calling a method to set
102. // those parameters.
103. setReportParameters();
104. }
105.
106. private void setReportParameters()
107. {
108.
109. // all the parameter fields will be added to this collection
110. ParameterFields paramFields = new ParameterFields();
111. //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112. //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114. // the parameter fields to be sent to the report
115. ParameterField pfItemId = new ParameterField();
116. //ParameterField pfStartDate = new ParameterField();
117. //ParameterField pfEndDate = new ParameterField();
118.
119. // setting the name of parameter fields with wich they will be recieved in report
120.
121. pfItemId.ParameterFieldName = "RegionID";
122.
123. //pfStartDate.ParameterFieldName = "StartDate";
124. //pfEndDate.ParameterFieldName = "EndDate";
125.
126. // the above declared parameter fields accept values as discrete objects
127. // so declaring discrete objects
128. ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129. //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130. //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132. // setting the values of discrete objects
133.
134.
135. dcItemId.Value = nItemId;
136.
137. //dcStartDate.Value = DateTime.Parse(strStartDate);
138. //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140. // now adding these discrete values to parameters
141. //paramField.HasCurrentValue = true;
142.
143.
144.
145. //pfItemId.CurrentValues.Clear();
146. int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147. pfItemId.Name = valueIDD.ToString();
148.
149. pfItemId.CurrentValues.Add(dcItemId);
150. //ParaLocation.ApplyCurrentValues;
151. pfItemId.HasCurrentValue = true;
152.
153. //pfStartDate.CurrentValues.Add(dcStartDate);
154. //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156. // now adding all these parameter fields to the parameter collection
157. paramFields.Add(pfItemId);
158.
159. //paramFields.Add(pfStartDate);
160. //paramFields.Add(pfEndDate);
161. /////////////////////
162. //Formula from Crystal
163. //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164. crViewer.RefreshReport();
165. // finally add the parameter collection to the crystal report viewer
166. crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170. }
171. }Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
How can identify the default currency for a customer?
How can identify the default currency for a customer?
I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth asking in this forum first.
BlueHi Gary,
As per my understanding of your question I am replying , If you are looking some thing else then I request you to please elaborate your query.
If you see the BP sales area data in transaction BP, In billing tab you maintain the currency for a customer which is default currency when you create a sales order.
<b>Reward points if it helps!!</b>
Best regards,
Vikash -
How can hide the command line of a t.code in the portal
Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Sat Jun 12 20:26:39 2010
Module: icxxthr_mt.c
Line: 2698
Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory -
How can all the users in my computer (my kids) have access to all the photos I have in I Photo?
How can all the users in my computer (my kids) have access to all the photos I have in I Photo? My photos only appear when I (the administrator) log into the computer. I want my kids to be able to access them also.
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up. -
How can show the result of a measuring that is done in a sub-program in my main panel?
How can show the result of a measuring that is done in a sub-program in my main panel?
In your subvi, wire the result(s) you want to ouput to the main program to an output terminal on the connector pane.
For a tutorial on subvi's, search the help for "connector panes" anc click on tutorial.
~Tim -
How can get the console window name of the current form?
How can get the console window name of the current form?
Try the various get methods of the viewObject such as getQuery:
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.2/state/content/navId.4/navSetId._/vtAnchor.getQuery%28%29/vtTopicFile.bc4jjavadoc%7Crt%7Coracle%7Cjbo%7CViewObject%7Ehtml/
Maybe you are looking for
-
Hello, Upon running the Inventory Status report for item group item no. 'A' shows 5,000 Ordered. When I drilled down on the 5,000, SAP B1 only shows 4,500 on open POs. Please help Using SAP B1 9.0 PL11 Thanks, Jagriti
-
[Help] Export or copy a virtual copy from one library to a different library?
Hi all, I need to be able to extract or export a virtual copy (VC) from one library to an other library. The same image that the VC depend on is represented in both libraries but since a friend will be editing some images on his computer and therefor
-
My iPod Classic will NOT format.
Disclaimer: This is a bit lengthy because I am describing the problem as clearly and directly with as much detail as possible. My iPod is a platinum iPod Classic 120GB. I actually had this problem about a year or so ago. I cannot vividly remember eac
-
my iphone is locked and i cant get itunes to connect with it. how do i fix it or do i need to take it to at&t. this all started with getting the new upgrade.
-
Hello! I'm starting on flash and I already manged to do some simple effects but i am not getting this one: Circle Masking Effect tutorial I manage to do the masking effect and I even see it action using live preview... But when I export the movie to