How can we debug a procedure?

we need to debug a procedure but we lost the way after oracle moved the procedure builder to enterprise manager. we can execute it via em but we need a tool for writing,debugging and executing new ones.

An SQLPlus window and either dbms_output or an anonymous log writing procedure is all you need to develop and debug home grown code.
Most routines can be written as anonymous pl/sql code and tested then collected together into stored procedures or packages.
You do not need a GUI tool, but if you must use one there is a product called PL/SQL Developer that some of our developers use. The developers seem to like it a lot.
HTH -- Mark D Powell --

Similar Messages

How can we Debug the workflow?

Hi,
How can we debug the workflow?
Please help me on debugging the workflow in step by step procedure?
Early reply is highely appriciable.
Regards,
Chow.

Hi,
If you want to set breakpoints in method which is used in workflow task then it is possible
till ECC5 am afraid about ECC6
you can see the graphical view of workflow through transactions said by Kalpesh
you can also use swwl (delete workflow) for viewing the container elements of the workflow.
SWI2_ADM1:Workitem without agents
SWI2_DIAG:Workflow with error
these transactions are also helpful
Thanks & Regards
Hari Sankar M

How can i debug specail function for VA01

How can i debug specail function for VA01,For example, I establish one and export type ZA01, the procedure code is ZRVADOR01, how do I debug this procedure?
thank you!

First you keep a break point in the program
Step#1.
RSNAST00 (on the below mentioned code).
PERFORM (TNAPR-RONAM) IN PROGRAM (TNAPR-PGNAM) USING RETURNCODE
US_SCREEN
IF FOUND.
and now in VA01 , just start Debugging after you choose the Output type using /H at the command.
now you will see the Debugging , now choose the menu Settings->Update Debugging
this will activate the Update Debugging.
Now Press F8. now another window will open , in that you it will stop near the break point in the step 1 .
It will take you to the corresponding program/
Now you Debug and check what ever you want

How can i debug a rfc being called from sap

hello Gurus,
We made a RFC call from SAP r3 to sap grc nfe......we did not receive any data in sap grc .......we go to SM58 and there it gives
the message "Name or password is incorrect (repeat logon)u201D.
How can i find out where the data has stuck.
Please help.
BR
Honey

HI,
please have a look at the link below..
this may help u !!!
[Re: how can i debug a rfc being called from .net connector (NCO) v2.0?;
Best of Luck !!1
Regards
Ravi

How can I debug a routine created in Deletion of similar requests?

Hello Experts,
I need some help from you. I need to delete overlapping requests and the common
settings you can set are not suitable, so I decided to write my own ABAP routine.
But how can I debug a routine, which is implemented in the deletion of similar requests?
Hope you can help me.
Cheers
Daniel Weilbacher

Please go to the routine code..
In the menu options..u will find an option for breakpoint--set..
The line where breakpoint is set will get highlighted and u will also see a STOP symbol..
then come out of routine..and then run the data load..
this ABAP routine for overlapping request deletion runs before the scheduled data load..
the run shud stop at the set breakpoint and show the routine code..in debugger mode..
cheers,
Vishvesh

How can I debug a sequence that has a subsequence is running in a separate thread?

Hi,
How can I debug a sequence that has a subsequence is running in a separate thread?
I have to have a continues check for a digital in signal to be able to terminate the sequence if a physical button is pushed.
This is running in a separate thread, but this way I cannot debug the main sequence.
Is there any workaround for this?
Thanks,
Andras

This KB might help you:
http://digital.ni.com/public.nsf/websearch/46D1E157756C37E686256CED0075E156?OpenDocument
Let me know if this does not help.
Allen P.
NI

How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?

Hi
I have a stored procedure. It can be executed like this
exec test @p = 1;
exec test @p = 2
exec test @p = n;
n can be hundred.
I want the sp being executed in parallel, not sequence. It means the 3 examples above can be run at the same time.
If I know the number in advance, say 3, I can create 3 different Execution SQL Tasks. They can be run in parallel.
However, the n is not static. It is coming from a table.
How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?
I think about using script task. In the script, I get the value of n, and the list of p, from the table, then running a loop with. In the loop, I create a threat and in the threat, I execute the sp like : exec test @p = p. So the exec test may
be run parallel. But I am not sure if it works.
Any idea is really appreciated.

Hi nam_man,
According to your description, you want to call stored procedures in parallel, right?
In SSIS, we can create separate jobs with different stored procedures, then set the same schedule to kick the jobs off at the same time. In this way, we should be careful to monitor blocking and deadlocking depending on what the jobs are doing.
We can also put all stored procedures in SSIS Sequence container, then they will be run in parallel.
For more information about SSIS job and Sequence container, please refer to the following documents:
http://www.mssqltips.com/sqlservertutorial/220/scheduling-ssis-packages-with-sql-server-agent/
https://msdn.microsoft.com/en-us/library/ms139855(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

How can we call a Procedure?

Hi All,
How can we call a procedure having all in parameters Otherthan Callablestatement?
Thanks in advance,
Sekhar

I guess you have to use Callablestatement still.

How can I debug webdynpro java application?

hi,
How can I debug webdynpro java application?
Thanks

Check this document
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0cb32c5-36a7-2910-2c9b-ba4a5bbdbb56
Also check this sdn thread Re: DeBugginng The WebDynPro Application particularly shailesh kumar posting
/padmanaban
Edited by: Padmanaban on Sep 26, 2008 1:55 AM

How can i check the procedure execution time..?

Hi All,
Can any one of you tell me how can i check the procedure execution time..?
Thanks in advance.

if running it from SQL*Plus,
SQL> set timing on
Or from PL/SQL, use DBMS_UTILITY.GET_TIME before and after the call and calclate the difference.

How can I supervise a procedure called through a job process

Hi all ...
How can I supervise a procedure called through a job process, and I mean to see if this procedure is active at the next time that the process should run again.
Because the procedure may run much longer that the next_time parameter for that process (job).
THANKS for you future(hope so) answer.

If this is a scheduled oracle job, then check the DBA_JOBS_RUNNING view
Hi all ...
How can I supervise a procedure called through a job process, and I mean to see if this procedure is active at the next time that the process should run again.
Because the procedure may run much longer that the next_time parameter for that process (job).
THANKS for you future(hope so) answer.

I have added a ADD-ONE like smart digg I want to debug this ADD-ONE. So plz help me how can i debug this.

I wants to debug and ADD-ONE plz help me how can i debug the ADD-ONE.

That's correct - you can't add it to another controller.
From the View Controller Catalog for iOS:
A split view controller must always be the root of any interface you create. In other words, you must always install the view from aUISplitViewController object as the root view of your application’s window. The panes of your split view interface may then contain navigation controllers, tab bar controllers, or any other type of view controller you need to implement your interface. Split view controllers cannot be presented modally.
-=-
Ken

How can we debug an SRM workflow problem?

Q: How can we debug an SRM workflow problem?

Hi,
In SRM system using transaction SWI6 you can troubleshoot the workflow process.
if you are using N step badi in the workflow process, we can debug the badi BBP_WFL_APPROV_BADI
method GET_REMAING_APPROVERS
if required please take a help of Abap consultant to debug...
Thanks & Regards,
prasad.s

How can we debug the screen pop up?

How can we debug the screen pop up?

Hi,
if you know where the popup is raised it is easy of course as you just have to uses F6 to keep the debug mode running.
But there is a way to get the popup into debug mode similar to typing /h into the ok code field of a sandard dynpro. Therefore you have to do the following steps:
1) click the "Create a Shortcut" button in the gui to get a shortcut on your desktop (the button next to new session)
2) in the oped screen for shortcut setting choose:
     type -> system command
     command -> /h
     depending on gui release you have to enter a system ID -> use the one of your system and parameters -> just type abc
3) press finish to create the shortcut
If you have done this you can drag and drop the shortcut from the desktop to a sap session or popup to switch on the debug mode. One shortcut works for all systems you have, the system id in it does not matter.
Oh, while I often have the case that I forget to resize the window before the popup appears so i cannot access the shortcut directly on the desktop, just remeber that you can always open a small file explorer window go to the desktop folder and drag it from there ;o)
Best Regards
Roman

How can I find the procedures where I use a table?

How can I find the procedures where I use a table?
I need to look for it in all the users.

select name,owner from dba_dependencies where referenced_name='table_name'
and referenced_owner = 'schema'
and type = 'PROCEDURE'
Aravind

How can we debug a procedure?

Similar Messages

Maybe you are looking for