How can we know perticular rfc is connected to process code and subprocess

Hi all,
we are integrating plm system to SAP ERP system(ecc). Plm system is connected to sap through sap CAD INTERFACE. In the cad interface they are configured process codes(5 chatecters length for identifying application like BOMCN for BOM) and subprocess codes(2 characters length for crete , delete e.t.c).
These functions call dialog rfc interface like BOM_CREATE_BILL_OF_ MATERIAL. My question is how these process codes are calling RFC's and these are dialog rfc's how we can run in backgroung procesing. I will appreciate for early reply.

Hi Prasad,
-Inbound IDOC Development-
Create Idoc segments (WE31)
Create Idoc (WE30)
Create message type (WE81)
Assign Message type to Idoc type (WE82)
Develop posting program.
Configure the function to handle one or more idocs in the same call (BD51)
Assign function module to Idoc and message type (WE57)
Create inbound process code (WE42)
Add message type to inbound parameters for partner (WE20)
-Outbound IDOC Development-
Create Idoc segments (WE31)
Create Idoc (WE30)
Create message type (WE81)
Assign Message type to Idoc type (WE82)
Develop posting program.
Configure the function to handle one or more idocs in the same call (BD51)
Assign function module to Idoc and message type (WE57)
Create inbound process code (WE41)
Add message type to inbound parameters for partner (WE20)
Regards,
Prabhudas

Similar Messages

  • How can I know which clients are connected to my network through express and which are connected through extreme?

    I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
    Here you can see both routers:
    I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
    Below, one can see the summary of the config for both routers.
    Would somebody explain it?
    Thanks,
    Marcelo
    Message was edited by: Marcelão

    please disregard this answer.
    Message was edited by: Marcelão

  • How can I know "No of open connections"

    Dear experts,
    How can I know "No of open connection". i.e. No of open connection.
    Thanks

    I'm assuming you probably just want the number of user sessions that are currently open, which would be
    SELECT COUNT(*)
      FROM v$session
    WHERE type = 'USER'Justin

  • How can i know the no .of  connections are used in the connection pool

    Hi
    I am using tomcat connection pool in my project .but how can i know how many connections are used by my project .how can i know how many connections are used plez help me

    You mean INSIDE the webapp, using the Admin Console (tomcat docs should be helpful in that case)... Where are you supposed to search for the info?

  • How can i know more trouble shooting issues/Real time problems and thier solutions?

    Hi to every one.
    i am Technician in a reputed mnc company. I am new to Microsoft servers. I learned MCSE 2008 and have basic trouble shooting knowledge.To improve my knowledge on these servers and how can i know real issues in a company occurs , solution to them. Please
    help me to get more knowledge on these servers.
    I am waiting for your reply.
    Thanks  & Regards,
    Praveen

    If you want to know more about issues related to your own internal servers, I'd simply start by reviewing the event logs and running perfmon in the short term to look for issues.  For more long term management and monitoring I'd look to a tool
    like System Center Operations Manager:
    http://technet.microsoft.com/en-us/library/hh205987.aspx
    For general troubleshooting skills growth, I'd stick around these forums and just read issues as they occur and try to assist with resolving some that you feel you can.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • How can I know, which RFC connection is used by my query designer ?

    HI,
    I would like to know,
    which RFC connection is used when i launch the query designer or the report designer or the web designer.
    Thanks.
    Guillaume

    Hi,
    Go to TCODE SM59 and see.
    Regards
    Nilesh

  • How can I know the right component for a transaction?

    Hi, I have a question
    When creating a new message in Solution Manager, notif_create, how can I know the right component given the transaction code or program name?
    Thanks in advance
    Edited by: María Valdés on Aug 19, 2008 6:25 PM

    Hello Maria,
    Well, in the Support Message window, place the cursor in Component box and press F4. This will brings up another window which contains the components list to which you are authorized. From that list you can choose about which component you want to create that particular support message.
    For example, if you are from Quality department, the following can be visible when you press F4.
    QM - Quality Management
      -- QM-ADB Adobe Forms
           -- QM-ADB-PRN Print Forms
      For the Print Forms, the component will be QM-ADB-PRN
    I hope it helps.
    Cheers,
    Satish.

  • If i Know the Interface name of the badi ,how can i know the badi definitio

    Hi Experts,
         1. If i Know the Interface name of the badi ,how can i know the badi definition name?
         2. And also if i know the name of the  implimentation class,how can i know the implimantation name and definitin name
    Thanks&Regards
    Ramakrishna L

    Hi,
    in order to find BAdI definition starting from the interface, you should perform a "Where used List" from SE24.
    Type your interface name and then, in the where used dialog box, tick the 'Business Add-in" check box.
    1.But is there any table which stores Implimentation name and Implimentation class name?
    2.And also any table that stores BADI Definitiion name and Implimentation names.
    1. SXC_CLASS table; Exit, implementation side: Class assignment (multiple)
    2. SXC_EXIT table: Exit: Implementation side: Assignment: Exit - Implementation
    Regards,
    Andrea

  • How can I know the name(s) of font from built-in font dialog from Word VSTO AddIns.

    Hi, All !!
    I would like to extract some values from the built-in font dialogbox "wdDialogFormatFont" through VSTO AddIns.
    Figured out short codes;
    Microsoft.Office.Interop.Word.Dialog 
    F_DLG  =  Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];    
    F_DLG.Show();
    MessageBox.Show( F_DLG.FontMajor.ToString() );
    MessageBox.Show( F_DLG.FontHighAnsi.ToString() );
    Ther last two lines (red ones) do not work at all.
    How can I know the name of the fonts ? (English and Non-English)
    In VBA, it works beautifully.
    Thanks !!

    Hi,
    According to the description, you want to get some options from the build-in dialog dispaly by code.
    As far as I know, we can declare an dynamic object to achieve the goal. Here is the code for your reference:
    dynamic F_DLG = Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];
    F_DLG.Show();
    MessageBox.Show(F_DLG.FontMajor);
    Also we can use refrection to get the property we wanted like below:
    Microsoft.Office.Interop.Word.Dialog F_DLG = Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];
    F_DLG.Show();
    MessageBox.Show(F_DLG.GetType().InvokeMember("FontMajor", BindingFlags.GetProperty, null, F_DLG, null).ToString());
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Hi experts . how can we know the stock details for a perticular plant?

    hi experts . how can we know the stock details for a perticular plant

    check this code
    REPORT  YSG_MATSTK_REP    LINE-SIZE 220
                              LINE-COUNT 50(5).
    *&                       DATA DECLARATION                              *
    TABLES: MARA,              "GENERAL MASTER DATA
            MARC,              "PLANT DATA FOR MATERIAL
            MARD,              "STORAGE LOCATION DATA FOR MATERIAL
            MBEW,              "MATERIAL VALUATION
            MVKE,              "SALES DATA FOR MATERIAL
            MAKT.              "MATERIAL DESCRIPTION
    DATA: BEGIN OF I_MARA OCCURS 0,
               MATNR LIKE MARA-MATNR,"MATERIAL NUMBER
               MBRSH LIKE MARA-MBRSH,"INDUSTRY SECTOR
               MEINS LIKE MARA-MEINS,"BASE UNIT OF MEASURE
          END OF I_MARA.
    DATA: BEGIN OF I_MARC OCCURS 0,
              MATNR LIKE MARC-MATNR,"MATERIAL NUMBER
              WERKS LIKE MARC-WERKS,"PLANT
              LVORM LIKE MARC-LVORM,"FLAG MATERIAL FOR DELETION AT PLANT
                                    "LEVEL
              PSTAT LIKE MARC-PSTAT,"MAINTENANCE STATUS
              DISPO LIKE MARC-DISPO,"MRP CONTROLLER
          END OF I_MARC.
    DATA: BEGIN OF I_MAKT OCCURS 0,
               MATNR LIKE MAKT-MATNR,"MATERIAL NUMBER
               MAKTX LIKE MAKT-MAKTX,"MATERIAL DESCRIPTION
          END OF I_MAKT.
    DATA: BEGIN OF I_MVKE OCCURS 0,
               MATNR LIKE MVKE-MATNR,"MATERIAL NUMBER
               VKORG LIKE MVKE-VKORG,"SALES ORGANIZATION
               VTWEG LIKE MVKE-VTWEG,"DISTRIBUTION CHANNEL
          END OF I_MVKE.
    DATA: BEGIN OF I_MARD OCCURS 0,
               MATNR LIKE MARD-MATNR,"MATERIAL NUMBER
               LGORT LIKE MARD-LGORT,"STORAGE LOCATION
               LABST LIKE MARD-LABST,"VALUATED STOCK WITH UNRESTRICTED USE
          END OF I_MARD.
    DATA: BEGIN OF I_OUT OCCURS 0,
            MATNR LIKE MARC-MATNR,
            WERKS LIKE MARC-WERKS,
            LVORM LIKE MARC-LVORM,
            PSTAT LIKE MARC-PSTAT,
            DISPO LIKE MARC-DISPO,
            MBRSH LIKE MARA-MBRSH,
            MEINS LIKE MARA-MEINS,
            MAKTX LIKE MAKT-MAKTX,
            VKORG LIKE MVKE-VKORG,
            VTWEG LIKE MVKE-VTWEG,
            LGORT LIKE MARD-LGORT,
            LABST LIKE MARD-LABST,
          END OF I_OUT.
    DATA : TOT TYPE I. " TOT - TOTAL TO PRINT STOCK
    *&                   S E L E C T I O N - S C R E E N                   *
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
    SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY.
    PARAMETERS: P_WERKS LIKE MARC-WERKS OBLIGATORY.
    SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
                    S_DISPO FOR MARC-DISPO.
    SELECTION-SCREEN END OF BLOCK B1.
    *&                  I N I T I A L I Z A T I O N                      *
    INITIALIZATION.
      S_MATNR-SIGN = 'I'.
      S_MATNR-OPTION = 'EQ'.
      S_MATNR-LOW = 'M-14'.
      S_MATNR-HIGH = 'M-18'.
      P_WERKS = '3000'.
      S_LGORT-SIGN = 'I'.
      S_LGORT-OPTION = 'EQ'.
      S_LGORT-LOW = '0001'.
      S_LGORT-HIGH = '0004'.
      S_DISPO-SIGN = 'I'.
      S_DISPO-OPTION = 'EQ'.
      S_DISPO-LOW = '001'.
      S_DISPO-HIGH = '002'.
      APPEND S_DISPO.
      APPEND S_LGORT.
      APPEND S_MATNR.
      CLEAR S_DISPO.
      CLEAR S_LGORT.
      CLEAR S_MATNR.
    *&             S T A R T - O F - S E L E C T I O N                     *
    START-OF-SELECTION.
      SELECT MATNR WERKS LVORM DISPO FROM MARC
      INTO CORRESPONDING FIELDS OF TABLE I_MARC
                          WHERE WERKS EQ P_WERKS
                          AND MATNR IN S_MATNR
                          AND DISPO IN S_DISPO
                          AND WERKS = P_WERKS.
      IF I_MARC[] IS INITIAL.
        WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
        EXIT.
      ENDIF.
      SELECT MATNR LGORT LABST FROM MARD INTO TABLE  I_MARD
                          FOR ALL ENTRIES IN I_MARC
                          WHERE MATNR = I_MARC-MATNR
                          AND WERKS EQ P_WERKS
                          AND LGORT IN S_LGORT.
      IF I_MARD[] IS INITIAL.
        WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
        EXIT.
      ENDIF.
      SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
                          FOR ALL ENTRIES IN I_MARC
                          WHERE MATNR = I_MARC-MATNR.
    IF I_MVKE[] IS INITIAL.
        WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
        EXIT.
      ENDIF.
      LOOP AT I_MARC.
        MOVE-CORRESPONDING I_MARC TO I_OUT.
        CLEAR MARC.
        SELECT SINGLE MATNR MBRSH MEINS FROM MARA
                         INTO CORRESPONDING FIELDS OF MARA
                         WHERE MATNR = I_OUT-MATNR.
        IF SY-SUBRC = 0.
          MOVE: MARA-MBRSH TO I_OUT-MBRSH,
                MARA-MEINS TO I_OUT-MEINS.
        ELSE.
          CONTINUE.
        ENDIF.
        SELECT SINGLE MATNR MAKTX FROM MAKT
                        INTO  CORRESPONDING FIELDS OF MAKT
                        WHERE  MATNR = I_OUT-MATNR.
        IF SY-SUBRC = 0.
          MOVE: MAKT-MAKTX TO I_OUT-MAKTX.
        ELSE.
          CONTINUE.
        ENDIF.
        LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
          MOVE: I_MARD-LABST TO I_OUT-LABST,
                I_MARD-LGORT TO I_OUT-LGORT.
          APPEND I_OUT.
        ENDLOOP.
        LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
          MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
                I_MVKE-VTWEG TO I_OUT-VTWEG.
          APPEND I_OUT.
        ENDLOOP.
        CLEAR I_OUT.
      ENDLOOP.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        FILENAME = 'C:\matstk.TXT'
       FILETYPE                        = 'ASC'
      TABLES
        DATA_TAB                        = I_OUT.
    *&                  T O P - O F - P A G E                              *
    TOP-OF-PAGE.
      WRITE:/ 'DATE:' ,SY-DATUM.
    *&                  E N D - O F - P A G E                              *
    END-OF-PAGE.
      WRITE: / SY-ULINE,
             /100 'PAGNO: ',SY-PAGNO,
             SY-ULINE.
    *&        E N D -- O F --  S E L E C T I O N                           *
    END-OF-SELECTION.
      LOOP AT I_OUT.
        AT FIRST.
          WRITE :/ 'MATERIAL EXTRACTION REPORT',
                   SY-ULINE.
        ENDAT.
        WRITE:/    SY-VLINE,
                   I_OUT-MATNR,SY-VLINE,
                   I_OUT-MEINS,SY-VLINE,
                   I_OUT-WERKS,SY-VLINE,
                   I_OUT-LVORM,SY-VLINE,
                   I_OUT-PSTAT,SY-VLINE,
                   I_OUT-DISPO,SY-VLINE,
                   I_OUT-MBRSH,SY-VLINE,
                   I_OUT-MAKTX,SY-VLINE,
                   I_OUT-VKORG,SY-VLINE,
                   I_OUT-VTWEG,SY-VLINE,
                   I_OUT-LGORT,SY-VLINE,
                   I_OUT-LABST,SY-VLINE.
        TOT = TOT + I_OUT-LABST.
        AT NEW MATNR.
          WRITE : 'NEW RECORD',
                   SY-VLINE.
        ENDAT.
        AT END OF LABST.
          WRITE : 'STOCK = ',
                   TOT,
                   SY-VLINE,
                   SY-ULINE.
        ENDAT.
        AT LAST.
          FORMAT COLOR 7 INTENSIFIED OFF.
          WRITE : /159 'TOTAL STOCK = ',
                     TOT.
        ENDAT.
      ENDLOOP.
        WRITE : /159 'TOTAL STOCK = ',
                     TOT.
    regards,
    srinivas
    <b>*reward for useful answers*</b>

  • How can I get my Mac to connect faster to the Internet? My wifi connection is fine....don't know why Safari and other web browsers are so slow.

    How can I get my Mac to connect faster to the Internet? My wifi connection is fine....don't know why Safari and other web browsers are so slow.

    If possible, connect to your router with Ethernet and turn off Wi-Fi. Any difference?

  • How can I call a RFC from dynpage ?

    Hi!
    I would like to know how can I call a RFC from a Portal aplication, dynpage or jspdynpage. there include some libraries ?
    any idea?
    thanks

    for deploying SAP Jra :
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4#search=%22how%20to%20use%20jca%20sapjra%20site%3Asap.com%22
    For lookup of SAP Jra use:
    com.sapportals.connector.connection.IConnectionFactory connectionFactory =(IConnectionFactory) initctx.lookup( "deployedAdapters/SAPFactory/shareable/SAPFactory");
    Using SAP Jra
    http://help.sap.com/saphelp_nw04s/helpdata/en/47/13044258bdd417e10000000a1550b0/content.htm
    The important jars required are:
    connector.jar
    Genericconnector.jar
    prtjndisupport.jar
    Thanks

  • TS2756 How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

    How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
    i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
    the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
    the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
    but not the usb iPhone i used to have.
    And when i try to add a new one i dont get a USB option.
    can some one help me please??
    this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

    The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

  • Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal, How can i know whether my phone is in use??

    Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal bcz it seems to be wiped out all data including settings. it might be in use somewhere turning new fresh Gadget.  How can i know whether my phone is in use??

    You would know for a fact if the device is in use, but if you go back to the find my iPhone app in iCloud.com, you can either select to erase it, or place it in lost mode, in which case, once the device makes a connection to the internet, it will automatically go into that mode.

  • How can I tell the device is connected to itunes 12?

    how can I tell the device is connected to itunes 12?  I have Windows 8.  I hear that the device is connected, but don't see the device to manage.  Only thing that happens is on the phone it says Trust the computer..   I say Trust and nothing happens.

    in ituens at the top where you see the small icons for Music, Movies, TV etc when your device is connected you will see a small icon representing your phone or ipad etc popup click that and it will show you the usual interface for backup and syncing.
    if that doesnt happen, like it didint for me initially, you should close itunes fully via task manager if you know how to do this and start it again with the device unplugged then plug it in after itunes has finished loading.
    Worst case scenario you nee to resatrt

Maybe you are looking for