How data will enter in AR_LOOKUPS table?

Hi
I have created one lookup in Receivable Responsibility. can any one tell how this data will come to AR_LOOKUPS table.? do we need to run anything? what is the process to load data in this table?
Best Regards

Hi Sravperm,
Please look at "Define Receivables Lookups:" section of the following link:
OracleFinancialsSetups
Please also see:
Oracle Receivable Implementation guide
Hope this helps!
Best Regards

Similar Messages

How data is populated in EUL5_QPP_STATS table?

there are few reports that are run monthly and the records of executed Discoverer reports were stored in EUL5_QPP_STATS table. But the information stopped getting recorded in this table from april 2014. Can anyone tell me how data is inserted in this table and whats is the cause of this issue.

Hi
Can anyone Please answer to my question

How Data will Transfer?

Hey,
While sending or Receving data from/into R/3 System
using IDOC or RFC or Proxy Adapters, How the data will be transferred into XI?
I know from XI, it will take care as XML Message..
what i mean...
IDOC <-> XI
      |
      |-------> HOW?
RFC <-> XI
     |
     |-------> HOW?
Proxy <-> XI
       |
       |-------> HOW?
please tell me.
Thanks
VG

Hi VG,
the principle is always the same: Incoming messages will be translated by an individual adapter to XML (XI protocol), outgoing messages will be transfered from XML to the individual protocol, for example DIAG in case of RFC.
The RFC adapter is part of J2EE adapter engine, what is running in the Java stack. This is, compare to IDoc/proxy an additional potential source of errors.
IDocs and ABAP proxys communicate native with the WAS, their performance and stability is better.
Use IDoc if you have existing IDocs for your Business Transaction, take proxies for new implemantations. RFC is recommentable for synchronous communication with elder R/3 releases (no WAS).
Regards,
Udo

How data retrieves from an Oracle table

Hi,
I have inserted record by record with record_number in a Oracle table. I have executed below query in PL/SQL developer. It displayed the result in same sequence order how I have inserted. But when in Toad it given in different order which does not have any sequence.
select * from bbs_user
Anyone please explain this why it is? Please treat this as very urgent.
Thanks in advance.

Welcome to the forums.
In a forum of volunteers, not being a support forum, there is no such thing as 'very urgent'. Your use of this two words in your very first post must be considered insulting and rude.
Also it appears you are completely clueless with respect to relational databases. Relational databases are about sets.
By definition -in mathematics- a set has no order.
If you want your data ordered you must use the ORDER BY clause in your SELECT statement.
Also I notice both Pl/SQL developer and Toad are non-Oracle products, so questions about these products do not belong in this forum.
Sybrand Bakker
Senior Oracle DBA

How data will storing in Cubes

Hi experts,
How the data is storing in cubes, like SQL server data are storing in Page and extents. SO how in SSAS cubes?
Thanks

hi ,
Analysis Services stores it's data in many files. you'll be able to get as below ;
1.In SQL Server Management Studio connect to SSAS instance -> right click on the server name
2.Go to properties and check property DataDir. This will be for example: c:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data
Go to that folder and you will see folder for each database and in there you will find many files that represent dimensions and measure groups.
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

Kick off SSIS master package once new data gets into a transactional table

hello
I have a SSIS master package.. I also have an UI which the user uses to configure up some date ranges (that I need to use to load the data from the package). After date configuration, when user clicks on RUN SSIS button in UI, that configured data gets loaded
up in a transactional db table. Once new data is entered into that table, i need to kick off this master SSIS package.
Question is , is there any other method besides using table triggers?
Please advice.
Thanks

Another method is to have a automated job created in SQL Agent which keeps on polling the transactional table. you can configure it to run periodically (may be every 30 mins etc). Each time it starts it needs to check the status of a table which captures
details of whether user has pressed RUN SSIS button (you need to include that logic in UI to set a bit in a status table when button is pressed). If status is set, it will check if transactional table has data (IF EXISTS(SELECT 1 FROM Table)). Once these two
are truw it will go to next step where it calls master package. At the end it needs to log somewhere that data transfer is completed and also need to reset the bit field as well.
So job will have three steps
Step1: check bit is set and table has data
ie
IF (SELECT bitField FROM StatusTable)=1 AND EXISTS(SELECT 1 FROM TTable)
SELECT 1
ELSE
RAISERROR 'Table not ready',16,1
and set job advanced option as
quit job reporting success for failure condition and go to next step for success condition
Step2: Execute master package
Step3: rest status bit and update daya transfer status in a log table with date of run,record count etc
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Craeting data fiel for data from KNA1 and ADRC table...

Hi,
I want to create a data file (tab delimited) which will have data from two tables, KNA1 and ADRC. The customer number, Name1 and Name2 fields data will come from KNA1 but the Street field data will
come from ADRC table. The ADRNR number will be a linkage between two tables KNA1 and ADRC.
I don't want to write a reprot for this. Can someone tell me if I can use SQVI for this and then go to options download in excel sheet directly from the menu.
Is there any other smarter way to do it ?
Regards,
Tushar.

Use an inner join between KNA1 and ADRC...The use <b>GUI_DOWNLOAD</b> FM to download the file...
Greetings,
Blag.

How the data is entered in the customized table

Hi,
In implemenation scenario when we create generic extraction , how the data is entered
in the customized table if it is huge data ( around 5000 records)
Regards,
Vivek

Hi Vivek,
Follow bellow steps:
1.Goto RSO2.
Choose Datasource from bellow of Three
a). Transaction Data
b). Master data Attributes
c). Master data Text
2.Specify Application component(SD/MM..)
3.There are three extraction methods to fill datasource.
4.Select extraction method extracts the data from a transparent table or database view.
5.Select Extraction from View, then we have to create the View.
a).Specify the view name.
b).Choose the view type (Database view) from bellow mentioned views.
i). Database view.
ii). Projection view.
iii).Maintainance view.
iv). Help view.
6. Specify Tables and Join Conditions and define view fields.
7. Assign View to Datasource
8. Once you specify view in Data source, the extract structure will generate.
9. you can check the data in RSA3.
Regards,
Suman

How to enter a date value in a Temporary Table

Hi!
Could anyone explain to me how I can enter a date value (say 26 October 2011) in a Temporary Table?
I tried the simple example below, but it gives the foll. error message:
Conversion failed when converting date and/or time from character string
CREATE TABLE Temp1
Column_A date,
Column_B varchar(max)
Insert into Temp1
values ('26.10.2011', 'bbb')
Thanks
Leon Lai

Hi,
Try This.....
CREATE TABLE Temp1
Column_A datetime,
Column_B varchar(max)
Insert into Temp1
values ('10/26/2011', 'bbb')
Thanks
Shafi

HT2480 After setting up an "Exchange" account my device, IPad/iPhone, it requires a new passcode to be set before data will be downloaded. I did this on the iPad and now I have to enter that passcode everytime I turn it on. How can I avoid this on my iPho

After setting up an "Exchange" mail account on my device, iPad/iPhone, it requires a new passcode to be set before data will be downloaded. I did this on the iPad and now have to enter that passcode everytime I turn it on. How do I avoid needing to enter a passcode on my iPhone everytime I turn it on?

The passcode is a requirement set by the administrator of the Exchange server you are connecting to.
It is purely for security purposes.
If you do not want the passcode, you must remove the Exchange account. There is no way around it.

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to download the data which is in the table?

how to download the data which is in the table?
every field data in the table i want to download and once the download is finished then i have to set the flag as 'download is finished ' as one field in table?
can any one help me in this.
Phani.
Edited by: phani kumarDurusoju on Jan 9, 2008 6:36 AM

One way is to Download the data Directly from the database table using the path SE11->Give table name ->Execute -> system ->List ->Save ->Local File
There u can downlaad the data .
The ither way is to use the code
The Following Code will be helpfull to You
Data :ITAB TYPE TRUXS_T_TEXT_DATA,
        FILE TYPE STRING.
         C_ASC     TYPE CHAR10   VALUE 'ASC',
DATA: L_STATUS TYPE C,
       L_MESSAGE TYPE PMST_RAW_MESSAGE,
       L_SUBJECT TYPE SO_OBJ_DES.
DATA: L_FILELENGTH TYPE I.
PERFORM download_to_pc
              TABLES
                 itab
              USING
                 filename
                 c_asc
                 c_x
              CHANGING
                 l_status
                 l_message
                 l_filelength.
FORM DOWNLOAD_TO_PC TABLES   DOWNLOADTAB
                    USING    FILENAME
                             FILETYPE TYPE CHAR10
                             DELIMITED
                    CHANGING STATUS
                             MESSAGE TYPE PMST_RAW_MESSAGE
                             FILELENGTH TYPE I.
DATA: L_FILE TYPE STRING,
        L_SEP.
L_FILE = FILENAME.
IF NOT DELIMITED IS INITIAL.
    L_SEP = 'X'.
ENDIF.
STATUS = 'S'.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      FILENAME                = L_FILE
      FILETYPE                = FILETYPE
      WRITE_FIELD_SEPARATOR   = L_SEP
    IMPORTING
      FILELENGTH              = FILELENGTH
    TABLES
      DATA_TAB                = DOWNLOADTAB
    EXCEPTIONS
      FILE_WRITE_ERROR        = 1
      NO_BATCH                = 2
      GUI_REFUSE_FILETRANSFER = 3
      INVALID_TYPE            = 4
      NO_AUTHORITY            = 5
      UNKNOWN_ERROR           = 6
      HEADER_NOT_ALLOWED      = 7
      SEPARATOR_NOT_ALLOWED   = 8
      FILESIZE_NOT_ALLOWED    = 9
      HEADER_TOO_LONG         = 10
      DP_ERROR_CREATE         = 11
      DP_ERROR_SEND           = 12
      DP_ERROR_WRITE          = 13
      UNKNOWN_DP_ERROR        = 14
      ACCESS_DENIED           = 15
      DP_OUT_OF_MEMORY        = 16
      DISK_FULL               = 17
      DP_TIMEOUT              = 18
      FILE_NOT_FOUND          = 19
      DATAPROVIDER_EXCEPTION = 20
      CONTROL_FLUSH_ERROR     = 21
      OTHERS                  = 22.
IF SY-SUBRC <> 0.
    STATUS = 'E'.
    CASE SY-SUBRC.
      WHEN 1.
        MESSAGE = 'gui_download::file write error'.
      WHEN 2.
        MESSAGE = 'gui_download::no batch'.
      WHEN 3.
        MESSAGE = 'gui_download::gui refuse file transfer'.
      WHEN 4.
        MESSAGE = 'gui_download::invalid type'.
      WHEN 5.
        MESSAGE = 'gui_download::no authority'.
      WHEN 6.
        MESSAGE = 'gui_download::unknown error'.
      WHEN 7.
        MESSAGE = 'gui_download::header not allowed'.
      WHEN 8.
        MESSAGE = 'gui_download::separator not allowed'.
      WHEN 9.
        MESSAGE = 'gui_download::filesize not allowed'.
      WHEN 10.
        MESSAGE = 'gui_download::header too long'.
      WHEN 11.
        MESSAGE = 'gui_download::dp error create'.
      WHEN 12.
        MESSAGE = 'gui_download::dp error send'.
      WHEN 13.
        MESSAGE = 'gui_download::dp error send'.
      WHEN 14.
        MESSAGE = 'gui_download::ubknown dp error'.
      WHEN 15.
        MESSAGE = 'gui_download::access denied'.
      WHEN 16.
        MESSAGE = 'gui_download::dp out of memory'.
      WHEN 17.
        MESSAGE = 'gui_download::disk full'.
      WHEN 18.
        MESSAGE = 'gui_download::dp timeout'.
      WHEN 19.
        MESSAGE = 'gui_download::file not found'.
      WHEN 20.
        MESSAGE = 'gui_download::dataprovider exception'.
      WHEN 21.
        MESSAGE = 'gui_download::control flush error'.
      WHEN 22.
        MESSAGE = 'gui_download::Error'.
    ENDCASE.
ENDIF.
ENDFORM.             "download_to_pc
At The End Reward points.
Please it's Required.
Thanks ,
Rahul

LOV Data will render dynamically based on the value in adv table

Hi Friends,
am wokring on the requirement of iprocuremnt
1) in iprocurement checkout page we have option called edit lines , when i click edit lines , the lines items will show catalog items and non catalog items.
2)if item should be non catalog delevere to location lov data should be restrict
3)if item should be catalog delevere to location lov data should be all locations
means dynamically how to restrict the lov data in line level advance table
can you help me on how to achieve this requirement
Thanks
krish.

If you are using messageLovInput you can try this approach.
1. In your CO catch 'lovPrepare' event [this event is triggered when user clicks on the magnifying icon besids the lov]
2. Extract the values based on which you want to filter the LOV data
3. Call VO's initQuery method to modify the Where clause of VO related to this LOV.
Code...
String eventActionParameter = pageContext.getParameter(EVENT_PARAM);
if(eventActionParameter.equals("lovPrepare")) {
//Extract the values
//Call a AM method to very the Where clause
}

How to get multipe data set values from Decision Table.

Hi All,
I need to use SAP BRM for one of the scenario where based one some Code Group I need to get a set of questions and for each question a set of possible answers.
The structure of Decision Table will be like below :
Table 1 : To get set of questions based on Project Code
Input Output Output
Project Code
Question Id
Question Description
Table 2 : To get set of answers based on question
Input Output Output
Question ID
Answer Id
Answer Description
I already searched in forum to get the multiple values based on some input and that works fine for a single field with multiple outcome.
Handling Selective Multiple Actions in SAP Business Rules Management System
In my scenario I need to get a set of Id and description as multiple outcome.
Can anyone please let me know how this can be achieved in BRM.
Thanks in advance
Ravindra

Create an XSD in the BRM project with the desired data structure and import the XSD alias in the 'Project Resources'. Add this XSD alias as input/output of the decision table.
Refer this:
Creating a Simple BRM Ruleset in 30 Easy Steps using NWDS 7.3 (Flow Ruleset with a Decision Table)

How can I enter data in an input schedule on a member in the EPM Add-On that is not a base member?

Hello, all,
how can I enter data in an input schedule on a member in the EPM Add-On that is not a base member?
E.g. I want to implement a top-down-planning scenario and I have the following hierarchy:
Europe
     Germany
     France
     UK
     Spain
     Italy
How can I enter a value on Europe in an input schedule in order to allocate this value afterwards?
Thanks in advance and best regards
Gerd

Gerd,
It should be something like below -
EuropeInput
Europe
     Germany
     France
     UK
     Spain
     Italy
EuropeInput shall be kept out of hierarchy and should be a base level member. Users will enter the numbers in this member. In your script logic, you will make use of this member to allocate the data in Bas(Europe) i.e. Germany, France, etc.
Effectively, after allocation the same data will be rolled up to Europe.
Many top-down planning would use such work-around as BPC doesn't allow writing to parent node.
Regards,
Ashish

How data will enter in AR_LOOKUPS table?

Similar Messages

Maybe you are looking for