Kick off SSIS master package once new data gets into a transactional table

hello
I have a SSIS master package.. I also have an UI which the user uses to configure up some date ranges (that I need to use to load the data from the package). After date configuration, when user clicks on RUN SSIS button in UI, that configured data gets loaded
up in a transactional db table. Once new data is entered into that table, i need to kick off this master SSIS package.
Question is , is there any other method besides using table triggers?
Please advice.
Thanks

Another method is to have a automated job created in SQL Agent which keeps on polling the transactional table. you can configure it to run periodically (may be every 30 mins etc). Each time it starts it needs to check the status of a table which captures
details of whether user has pressed RUN SSIS button (you need to include that logic in UI to set a bit in a status table when button is pressed). If status is set, it will check if transactional table has data (IF EXISTS(SELECT 1 FROM Table)). Once these two
are truw it will go to next step where it calls master package. At the end it needs to log somewhere that data transfer is completed and also need to reset the bit field as well.
So job will have three steps
Step1: check bit is set and table has data
ie
IF (SELECT bitField FROM StatusTable)=1 AND EXISTS(SELECT 1 FROM TTable)
SELECT 1
ELSE
RAISERROR 'Table not ready',16,1
and set job advanced option as
quit job reporting success for failure condition and go to next step for success condition
Step2: Execute master package
Step3: rest status bit and update daya transfer status in a log table with date of run,record count etc
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

Using external parameters within MS Query returning that data right into a pivot table Excel 2010

In Excel 2010 i was able to use the external parameters within MS Query returning that data right into a pivot table. But the parameter on the worksheet will not save in the paremeter setting of the data connection. And if you save it and open
it and try to refresh the pivot table Excel stops responding and you have to force the file closed. I found out the reason to crash is that it did not keep the parameter saved.
Can this be fixed?

Hi,
Just
checking in to see if the information of Oskar was helpful. Please
let us know if you would like further assistance.
Jaynet Zhang
TechNet Community Support

Data gets deleted for the table RSTRFIELDSH

If data gets deleted for the table RSTRFIELDSH at BW end
...what should i do?to get it back

Wim,
We lost the data from production. We ran Archive program to archive the data and archiving file is still exist.
There is no possibliity to run the OUTBOUND process again to create the IDOCs.
But only my concern is When we run the Transaction SARA we will be getting the data for other period as well.
But I need to reload the data for three months only because that archiving file also has other period data as well.
Can you send me details of how to use SARA Transaciton for particular period.
Thanks,
Kalikonda.

*HOW TO INSERT DATA MANUALLY INTO A BW TABLE*

Dear experts,
I'm working in BW 3.5 version.
Since I need to test some tables which are going to be load manually, please could anyone explain me which are the steps to insert data manually into a BW table.
Thank you very much in advance,
Jorge

Hi Jorge,
You can maintain the TMG(Table maintenance generator) and then enter the data manually. TMG creation Tcode is se55. and to view and maintain TMG it is sm30 .
Or if you have the data in excel. You can write a simple excel uploading ABAP program which will load your excel data to the table .
Hope the above reply was helpful.
Thanks & Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on Apr 30, 2011 6:45 AM

How to delete the data loaded into MySQL target table using Scripts

Hi Experts
I created a Job with a validation transformation. If the Validation was failed the data passed the validation will be loaded into Pass table and the data failed will be loaded into failed table.
My requirement was if the data was loaded into Failed database table then i have to delete the data loaded into the Passed table using Script.
But in the script i have written the code as
sql('database','delete from <tablename>');
but as it is an SQL Query execution it is rising exception for the query.
How can i delete the data loaded into MySQL Target table using scripts.
Please guide me for this error
Thanks in Advance
PrasannaKumar

Hi Dirk Venken
I got the Solution, the mistake i did was the query is not correct regarding MySQL.
sql('MySQL', 'truncate world.customer_salesfact_details')
error query
sql('MySQL', 'delete table world.customer_salesfact_details')
Thanks for your concern
PrasannaKumar

Auto-kick off MaxL script after Oracle GL data load?

Hi guys, this question will involve 2 different modules: Hyperion and Oracle GL.
My client has their accounting department updating Oracle GL on a daily basis. My end-user client would like to write a script to automatically kick off the existing MaxL script which is for our daily data load in Hyperion. Currently, the MaxL script is manually executed.
What's the best approach to build a connection for both modules to communicate with each other? Can we use a timer to trigger the run? If so, how?

#1 External scheduler.
I've worked on Appworx and it has build a chain dependent task. There are many other external schedulers like Tivoli,....
#2 As Daniel pointed out you can use Windows scheduler.
For every successful GL load add a file to a folder which is accessible for your Essbase task.
COPY Nul C:\Hyperion\Scripts\Trigger\GL_Load_Finished.txt
Create another bat file which is scheduled to run on every 5 or 10 mins (this should start just after your GL Load scheduled task)
This is an example i've for a triggered Essbase job.
IF EXIST %BASE_DIR%\Trigger\Full_Build_Started.txt (
Echo "Full Build started"
) else (
     IF EXIST %BASE_DIR%\Trigger\Custom_Build_Started.txt (
     Echo "Custom Build started"
     ) else (
          IF EXIST %BASE_DIR%\Trigger\Post_Build_Batch_Started.txt (
          Echo "Post Build started"
          ) else (
          IF EXIST %BASE_DIR%\Trigger\Start_Full_Build.txt (
          Echo "Trigger found starting batch"
          MOVE %BASE_DIR%\Trigger\Start_Batch.txt %BASE_DIR%\Trigger\Full_Build_Started.txt
          call %BASE_DIR%\Scripts\Batch_Files\Monthly_Build_All_Cubes.bat
          ) else (
               IF EXIST %BASE_DIR%\Trigger\Start_Custom_Build.txt (
               Echo "Trigger found starting Custom batch"
               MOVE %BASE_DIR%\Trigger\Start_Custom_Batch.txt %BASE_DIR%\Trigger\Custom_Build_Started.txt
               call %BASE_DIR%\Scripts\Batch_Files\Monthly_Build_All_Cubes_Custom.bat
               ) else (
                    IF EXIST %BASE_DIR%\Trigger\Start_Post_Build_Batch.txt (
                    Echo "Trigger found starting Post Build batch"
                    MOVE %BASE_DIR%\Trigger\Start_Post_Build_Batch.txt %BASE_DIR%\Trigger\Post_Build_Batch_Started.txt
                    call %BASE_DIR%\Scripts\Batch_Files\Monthly_Post_Build_All_Cubes.bat
)So this bat file if it finds Start_Full_Build.txt in the trigger location, it'll rename that to Full_Build_Started.txt and will call the Full Build (likewise for custom and post build)
Regards
Celvin
http://www.orahyplabs.com

How can I use UC4 instead of SSIS Master Package deployed using project deployment model?

Hi Folks,
My team is planning to opt UC4 for scheduling the SQL Jobs and I have to come up with a plan to integrate it.
As of now, I do not have software licence in place to do some research.
If you have worked on it, can you tell me that how can I schedule SSIS packages using UC4.
Also, we are using SSIS project parameters (Project deployment Model). What kind of changes I have to make in SSIS packages to support UC4. Is it possible to pass parameters to SSIS package through UC4? If not, is there any alternativ?
Appreciate your help!
Gaurav Gupta

If you have access to Automic Community, there are details there on how to execute SSIS 2012 packages deployed in SSISDB catalog (project deployment model). Here is the link:
https://community.automic.com/discussion/4878/how-to-execute-sql-server-data-tools-ssdt-2012-package-synchronously-using-sql-job
Leonard

How to update (add new data in different tab) existing table from Excel

i've an existing table, for instance User Profile table, it consists of few tab in the table which contains different data... recently i've added new tab to the existing table and i would like to upload a particular data for this new tab... is there any way to upload (insert new data for the tab on existing data) this particular data into the existing table from Excel file?
could it be done by using lsmw?
Edited by: Yeong Kang Liew on Apr 5, 2010 4:35 AM

Check HELP on MODIFY & UPDATE statements.

Searching for worksheet name in master worksheet then copying data back into worksheet name

I have a workbook with 100+ worksheets. I have a 'Data' worksheet that includes data for the 100+ worksheets. I would like a macro to find the worksheet name in the 'Data' worksheet and copy the data below into the worksheet name.
For example, The first worksheet is named "Trains". I go through the 'Data' worksheet, look under column A for "Trains", then copy the data below "Trains", and paste into the 'Trains' worksheet. The data in the
'Data' worksheet is separated by a blank row.

I have assumed that your data is like the diagram below and that the data should be added at the bottom of column A of each sheet.
<Blank row>
Trains <On its own row>
<Data row>
<Data row>
<Etc....>
<Blank row>
Sub TestMacro()
Dim w As Worksheet
Dim R As Range
For Each w In Worksheets
If w.Name <> "Data" Then
Set R = Worksheets("Data").Cells.Find(w.Name)
If Not R Is Nothing Then
Set R = R.CurrentRegion
Set R = R.Offset(1).Resize(R.Rows.Count - 1)
R.Copy w.Cells(w.Rows.Count, "A").End(xlUp)(2)
End If
End If
Next w
End Sub

Excel data transfer into SAP internal table with GUI_UPLOAD

hi all,
i m using SRM4 system and i wanted to develop one report which will upload data from excel and convert it into IT.
i know that many threads are posted on this topic.
but my requirement is slight different. in the system only one function module is available that is "GUI_UPLOAD" and we want that user shd not save file as tab delimited before calling this fm. instead, program shd take care of all these things...
please suggest something asap..
helpful ans will be rewarded..
thanks,
jigs.

Dear Jigs,
Please go though the following lines of code:
D A T A D E C L A R A T I O N *
TABLES: ANEP,
BKPF.
TYPES: BEGIN OF TY_TABDATA,
MANDT LIKE SY-MANDT, " Client
ZSLNUM LIKE ZSHIFTDEPN-ZSLNUM, " Serial Number
ZASSET LIKE ZSHIFTDEPN-ZASSET, " Original asset that was transferred
ZYEAR LIKE ZSHIFTDEPN-ZYEAR, " Fiscal Year
ZPERIOD LIKE ZSHIFTDEPN-ZPERIOD, " Fiscal Period
ZSHIFT1 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 1
ZSHIFT2 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 2
ZSHIFT3 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 3
END OF TY_TABDATA.
Declaration of the Internal Table with Header Line comprising of the uploaded data.
DATA: BEGIN OF IT_FILE_UPLOAD OCCURS 0.
INCLUDE STRUCTURE ALSMEX_TABLINE. " Rows for Table with Excel Data
DATA: END OF IT_FILE_UPLOAD.
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME,
BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK B2,
END OF BLOCK B1.
E V E N T : AT S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = '.'
CHANGING
FILE_NAME = P_FNAME
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Upload Excel file into Internal Table.
PERFORM UPLOAD_EXCEL_FILE.
Organize the uploaded data into another Internal Table.
PERFORM ORGANIZE_UPLOADED_DATA.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
*& Form UPLOAD_EXCEL_FILE
text
--> p1 text
<-- p2 text
FORM UPLOAD_EXCEL_FILE .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FNAME
I_BEGIN_COL = 1
I_BEGIN_ROW = 3
I_END_COL = 7
I_END_ROW = 32000
TABLES
INTERN = IT_FILE_UPLOAD
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " UPLOAD_EXCEL_FILE
*& Form ORGANIZE_UPLOADED_DATA
text
--> p1 text
<-- p2 text
FORM ORGANIZE_UPLOADED_DATA .
SORT IT_FILE_UPLOAD BY ROW
COL.
LOOP AT IT_FILE_UPLOAD.
CASE IT_FILE_UPLOAD-COL.
WHEN 1.
WA_TABDATA-ZSLNUM = IT_FILE_UPLOAD-VALUE.
WHEN 2.
WA_TABDATA-ZASSET = IT_FILE_UPLOAD-VALUE.
WHEN 3.
WA_TABDATA-ZYEAR = IT_FILE_UPLOAD-VALUE.
WHEN 4.
WA_TABDATA-ZPERIOD = IT_FILE_UPLOAD-VALUE.
WHEN 5.
WA_TABDATA-ZSHIFT1 = IT_FILE_UPLOAD-VALUE.
WHEN 6.
WA_TABDATA-ZSHIFT2 = IT_FILE_UPLOAD-VALUE.
WHEN 7.
WA_TABDATA-ZSHIFT3 = IT_FILE_UPLOAD-VALUE.
ENDCASE.
AT END OF ROW.
WA_TABDATA-MANDT = SY-MANDT.
APPEND WA_TABDATA TO IT_TABDATA.
CLEAR: WA_TABDATA.
ENDAT.
ENDLOOP.
ENDFORM. " ORGANIZE_UPLOADED_DATA
In the subroutine --> ORGANIZE_UPLOADED_DATA, data are organized as per the structure declared above.
Regards,
Abir
Don't forget to award points *

Reg: Data getting repeated in the table and displayed in the Smartorm.

Hello Experts,
Requirement is to display header data from kna1table and item data from two tables faglflexa and bsid.
Layout is something like this.
Name and Address is capture from KNA1.
Item Details from faglflexa and BSID based on one condition, UMSKZ ne 'X' and 'Y' for the respective KUNNR from KNA1. First Item table.I have taken a separate internal table from print program
Item Details from BSID only based on one condition, UMSKZ eq 'X' and 'Y' for the respective KUNNR from KNA1. Second Item table. I have taken a separate internal table from print program
Calculation based on faglflexa and BSID table on one condition,UMSKZ ne 'X' and 'Y' for the respective KUNNR from KNA1. Third t Item table. Data from the first internal table
The complete thing should be displayed on Smartform for one Customer (kunnr). Then should go to the next customer.
I have a written a code like this, For Example.
loop at kna1 into w_kna1.
Used Table1 in smartform and give a loop to display the item details based on first internal table.
display itemdetails
Used Table2 in smartform and give a loop to display the item details based on second internal table.
display itemdetails.
Used Template to display the item details to display the item details based on first internal table.
endloop.
Now my problem is table 1 is coming fine. table 2 data is getting repeated for all the customers based on 1st customer data, how should i clear the workarea after every customer.
Similar pbm for the template which i'm using.
Please help me on this.
Thanks in advance.
Abdur Rafique

Hi Vishnu,
Thanks for replying. I cant use one single table to display the output. There are several conditions in two tables.
I have corrected the error of repetition data. Logic i will mention it below.
loop at kna1 into wa_kna1.
for header data " this is main table
loop at item_1 into wa_item_1. " for first item table
Data displayed.
loop at item_2 into wa_item_2. " for 2nd item table
Data displayed.
endloop. " for 2nd item table
data calculation based on first item table.
endloop. " this is for first item table
endloop." this is for 2nd item table.
The data which is there in the 2nd item table should display data based on the kna1 loop. Data is displaying properly but not in 1 table, say for example.
kunnr- 1000010
there are 9 items.
All the 9 items should be in 1 table. But here it is displaying 1 item in 1 table till 9 items in 9 tables.
I need to club all the 9 items in 1 table.
One more doubt is 2 items have same belnr (document number) i need to club this and add the wmbtr field and then display as 1 record.
So final records in 2nd item table should be 8 not 9.
Can you please help me on this.
Thanks in advance.
Abdur Rafique

How to insert this date colum into some other table

Hi all,
I have to write a procedure to select the data from one table & insert date column data into another table,the data is in different date formats,but in the second table date column format should be (mm/dd/yyyy) .
example:
if the date in first table is 1992 it should be modify to "01-01-1992" & insert into the second table.But the values should be different(below are the different types).
RELEASE_DATE
1992
1962
July 1987
Aug 1968
10/30/06
6/1/2005
2004
7.25.1951
12/12/2006
12/1/2005
1992
2003
2005
1958
2002
11/11/03
1/1/91
50-21-2001
10.28.1991
Please any body can help.


Thanks..! for giving the data type..
Here is an example..
SQL> desc atestdate
Name Null? Type
CHARDATE VARCHAR2(10)
ACTDATE DATE
SQL> select * from atestdate;
1992
July 1987
Aug 1968
10/30/06
6/1/2005
2004
7.25.1951
12/12/2006
12/1/2005
1992
2003
2005
1958
2002
11/11/03
1/1/91
50-21-2001
10.28.1991
18 rows selected.
SQL> select char_trim_x(chardate) from atestdate;
1992
July-1987
Aug-1968
10-30-06
6-1-2005
2004
7-25-1951
12-12-2006
12-1-2005
1992
2003
2005
1958
2002
11-11-03
1-1-91
50-21-2001--? 50 can not be a month nor a date do not give junk values
10-28-1991
18 rows selected.
char_trim_x This is a function which I have created with REPLACE function
this brings to some extent of an orderly format..
But you have not yet posted your work ..
-SK

Tried logging on to Yahoo Mail but keep getting kicked off when Itey to download new mail

Just upgraded to iOS 6. I can log on to Yahoo, but when I try to update new messages, it kicks me off to a screen for my password only. I enter password and it won't take it, even though I know it is correct.

Genieo Adware is installed. Removing it will help.
If you have another browser installed, use it.
If not, launch App store and get another browser for temporary use.
Remove it afterwards.
1. Use free AdwareMedic by clicking “Download ” from here
    http://www.adwaremedic.com/index.php
    Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
    Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
    “Quit AdwareMedic”.
               or
    Remove the adware manually by following the “HowTo” from Apple.
    http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
     Turn those off and relaunch Safari to test .
     Turn those on one by one and test.
3. Safari > Preferences > Search > Search Engine :
    Select your preferred   search engine.
4. Safari > Preferences > General > Homepage:
     Set your Homepage.

Forms Builder Master Child relationship --- column datas gets hided.

Hi All,
I have a screen which have 5 columns. Out of which first 3 columns belong to Table A and 4th column belong to say Table B and the 5th column belong to Table C. There is a master Child relationship between Table A and Table B also between Table A and Table C.
The issue is, i enter the data for these columns in row wise. I enter all 5 columns with value and when i switch to next row, the 4th and 5th column's value gets hided.
Please suggest.
Thanks and Regards,
KirthiRavi

KirthiRavi wrote:
Hi All,
I have a screen which have 5 columns. Out of which first 3 columns belong to Table A and 4th column belong to say Table B and the 5th column belong to Table C. There is a master Child relationship between Table A and Table B also between Table A and Table C.
The issue is, i enter the data for these columns in row wise. I enter all 5 columns with value and when i switch to next row, the 4th and 5th column's value gets hided.
Please suggest.
Thanks and Regards,hI KirthiRavi
You have relation with
Table A with Table B
Table A with Table Cwhen you switch a record to another record at bloc/table A, it's normal forms behavior it's will hide value of block/table B and C. when your click on associate row of block/table A it will show.
It's the form normal behavior for relationship.Hope you understand.
Hamid
Mark correct/helpful to help others to get right answer(s).*

Light goes off or System crash During Upload data through BDC Call Transaction ..

Hi Experts ,
                How do I know how many records had been updated in database while uploading the flat file through BDC call transaction ,the system suddenly crash or light goes off ..............
Thanks and Regards .
Om prakash

Hi Prakash,
i have already told toy to use bapi to get all the error and success messages, through which you don't need to do all the above stuffs, the first method you have shown is based on algorithm , which might not be correct each time, and the second method is handy.
You can add these code lines in your BDC which will give you all error and success messages
DATA : BEGIN OF options.
         INCLUDE STRUCTURE ctu_params.
DATA : END OF options.
DATA: i_messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
       l_message LIKE bapiret2-message.
DATA: p_mode TYPE c.
DATA BEGIN OF it_error OCCURS 1.
DATA : text(100) TYPE c.
DATA END   OF it_error.
DATA BEGIN OF it_success OCCURS 1.
DATA: text(100) TYPE c.
DATA END   OF it_success.
START-OF-SELECTION.
PERFORM upload_data.
*   Report for success
   PERFORM success_text.
*   Report for Error
   PERFORM error_text.
END-OF-SELECTION.
CALL TRANSACTION 'your transaction code' USING bdcdata
                             OPTIONS FROM options
                             MESSAGES INTO i_messtab.
     IF SY-SUBRC NE 0.
       CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
         EXPORTING
           id         = sy-msgid
           number     = sy-msgno
           language   = sy-langu
           textformat = 'ASC'
           message_v1 = sy-msgv1
           message_v2 = sy-msgv2
           message_v3 = sy-msgv3
           message_v4 = sy-msgv4
         IMPORTING
           message    = l_message.
       CONCATENATE l_message '-' wa_input-newko wa_input-wrbtr wa_input-budat INTO it_error-text
       SEPARATED BY ' '.
       APPEND it_error.
     ELSE.
       CONCATENATE 'DATA UPLOADED SUCCESSFULLY :' wa_input-newko wa_input-wrbtr wa_input-budat
       INTO it_success-text SEPARATED BY ' '.
       APPEND it_success.
     ENDIF.
     REFRESH bdcdata.
     CLEAR: wa_input,l_message.
ENDLOOP.
***ENDLOOP.
endform.
                    " UPLOAD_DATA
FORM success_text .
   LOOP AT it_success.
     AT FIRST.
       WRITE :/10 'Following records successfully uploaded'.
       ULINE.
     ENDAT.
     WRITE :/10 it_success-text.
   ENDLOOP.
ENDFORM.
FORM error_text .
   LOOP AT it_error.
     AT FIRST.
       WRITE :/10 'Following records are not uploaded'.
       ULINE.
     ENDAT.
     WRITE :/10 it_error-text.
   ENDLOOP.
ENDFORM.

Kick off SSIS master package once new data gets into a transactional table

Similar Messages

Maybe you are looking for