How determine repository for existing IDM instance

Hello all! Here is an interesting one. I've inherited an IDM instance and have to find out about its repository (nobody seems to know as the consultants who set it up are long gone). I looked through the idm.war file but don't see anything regarding where its database instance is (I'm sure its not in LDAP or a flat file). Where is this data persisted and how can it be changed if need be? :-)
Thanks!

Sorry - didn't see the last part of this.
If you want to change the assigned REPO, you can either use the correct flags / options with the "lh setRepo" command or you can run "lh setup" instead. The "lh setup" will launch a wizard-based window to take you through the steps to connect. This is where you can specify (drop-list, text entry) the type of REPO (files, DB) and how-to connect to it. Just be careful that when the REPO was originally created using the provided scripts, it would likely have been modified so that there's a specific account (ID, Password) that would be enabled for access. So net -- if you don't know the account credentials for remotely connecting to the existing or alternate REPO, I wouldn't go changing which REPO the instance points to.
Make sense?

Similar Messages

How to look for duplicate process instances?

In Oracle BPM 11g, is there a good way to look for duplicate process instances based on process data attributes? For example, I have entered an instance of a process for 'John Smith' with a date of '4/1/2010' and I want to see if there is another instance in the same process with these same data values to evaluate as a potential duplicate. I believe we can write a java service to invoke the API to do this, but I am wondering if there is a better way within the process design to do this (XPath extension functions or soemthing?). It seems like this would be a common need.

I am really looking for an approach to looking for duplicate instances within my process flow, not from EM. So, if the user starts a new instance of a process, I can check for another instance that appears to be a duplicate and direct the flow to a human activity to review the potential duplicate and make a decision as to whether to continue processing the new instance or reject it. My guess is that we need to us a service task to invoke java code which uses the API to investigate other instances with the same values. But, I was hoping for a simpler solution....I have to think that this is not too uncommon.

Help on determining version for existing forms & porting to Forms 9i

I'm new to Oracle and Oracle Forms.
I have a large number of *.fmb, *.fmx, *.pll, *.sql files (all developed in the early 1990's).
I am trying to convert them to 9i. Are there any "How-To's" on the subject?
Is there a tool to help me determine what the original Forms version is?
Also . . .
When opening a *.fmb in Forms 9i, I get the error "FRM-10102: Cannot attach PL/SQL library <filename>.pll. This library attachment will be lost if the module is saved.
I opened the specified *.pll file and then another form and received the same error.
Any help or direction will be greatly appreciated.
Thanks in advance.
Brian Atkinson

Generally speaking you can just open up a form in 9i and that will upgrade it. There are specific issue on moving from client/server to the web and you can go to otn.oracle.com/products/forms and click to view the Forms Upgrade Centre.
The error you are getting probably means that the form has a library attached but when you open that form it cannot find it.
What I would do is make sure the location of the pll files is on the FORMS90_PATH environment variable (in the registry on Windows).
Another note - you can go to otn.oracle.com/products/forms and click to download other versions of the software - including 6i. However while it may only be certified to go to 61 and then 9i, in many cases you can go directly from 4.5. to 9i.
Hope this helps.
Regards
Grant Ronald
Forms Product Management

How to check for outstanding service instance creation requests

Greetings,
In preparation to upgrade my OEM Cloud Control from 12.1.0.1 to 12.1.0.3 I am reading the OEM Cloud Control Upgrade Guide. Step 2b in Chapter 3 (Getting Started) says to check for outstanding database service instance creation requests as follows: In Cloud Control from the Enterprise menu, select Infrastructure Cloud. I do not see an Infrastructure Cloud option under the Enterprise dropdown. I don't understand why not. If anyone can shed some light on this I would appreciate it.
Thank you.
Bill Wagman

Step 2b applies to sites with DBaaS (database as a service) feature enabled. If you have not set up DBaaS, it is not necessary to check on database requests referred to in the step.
Doc on DBaaS:
http://docs.oracle.com/cd/E24628_01/doc.121/e28814/cloud_db_using.htm#CHDFDDBC
By the way, it is recommended that you check out the following notes on upgrade:
1568143.1 - EM 12c R3: Checklist for Upgrading Enterprise Manager Cloud Control from Version 12.1.0.x to 12.1.0.3
1569883.1 - EM 12c R3: Checklist for Upgrading Management Agents Version 12.1.0.x to 12.1.0.3

How do we determine if a Human Task instance in BPM Workspace is open?

Hi All,
An interesting one. How do we programatically determine if a BPM Workspace instance is opened for processing? I would like to ensure that a form is opened only by one user at a time, and any attempt to open the form concurrently will result in the form presenting an error message and then closing itself.
Any ideas?
I am posting this on the SOA form as well, as it is the BPM Workspace. Kindly overlook if this is inappropriate.
JDev : 11g.
Thank you.

posting it here will help you for sure
Business Process Management Suite
SOA Suite

How to crate a page template for multiple page instances?

Hello,
When I use the Administration Portal to create a page with portlets in the Portal Resource Library, I can choose to use that page it in my portal. The problem is that I can use it only once. How can I crate a page template with portlets so I can use use it as a template for many page instances in one portal?
I'm using Portal 8.1.6.
Regards,
Eirik

Hey Dave, See the image below:

How to update an existing item in a sharepoint list using the WSS adapter for Biztalk

Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
BizTalk 2013 and SP 2013 ..
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

A ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
Regards.

How to configure multiple listeners to listen for the same instance.

Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.

Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

I would like to delay my alarms for a brief instance so that I know a signal is real and not a glitch, how could I delay an alarm for a second or two.

I have a flow controller linked to fieldpoint that is tripping my alarm system (in Bridgeview) every time it reads a quick voltage difference. This occurs only for an instance, but it is enough to trip my alarms. I wanted to place in a 1 or 2 second alarm delay to make sure the signal is real, if it is than the alarm can trip. If it lasts for a brief instance I want the system to keep running and the alarm to ignore the glitch. How can I program that?

The way you implement this entirely depends on your vi-code.
An easy solution I could think of would be to low-pass filter your alarm-signals and check these values for limit-increase.

How to activate split valuation for existing material having stock open PO,

Hello,
How to activate split valuation for existing material in plant having stock and open PR,PO and Production order.
Regards

Hi
It is not possible to activate in such case, u should not have any stock.
With regards
Pavan

How to add long text for existing static text in Adobe forms.

Hi all,
I have a requirement that I need to add a long text for existing Static text in my adobe form
1) Counter part inputs
2) Mack Inputs.
These two are static texts, I need to add the long text in the following manner.
1)Counter Part Inputs(zds220)
2)mack Inouts(zds340)
Please suggest me how to do it.
Thank You.
Suneel.

Hi Nitin Sikka,
Thanks for your reply. I found solution for the above issue. I need to change the text to text field and binding to that text field.
Thank You,
Suneel.

How to check for the sub folder in the document library Is already Exist using CSOM?

Hi,
My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
I able to check for the parent folder.
But cant able to check the subfolder in the document library.
How to check for the sub folder in the document library?
Here is the code for the folder
IsFolder alredy Exist.
private
string IsFolderExist(string InputFolderName)
string retStatus = false.ToString();
try
ClientContext context =
new ClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
            context.Credentials =
CredentialCache.DefaultCredentials;
List list = context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
FieldCollection fields = list.Fields;
CamlQuery camlQueryForItem =
new CamlQuery();
            camlQueryForItem.ViewXml =
string.Format(@"<View Scope='RecursiveAll'>
<Query>
                                        <Where>
<Eq>
<FieldRef Name='FileDirRef'/>
<Value Type='Text'>{0}</Value>
                                            </Eq>
</Where>
</Query>
                            </View>",
@"/sites/test/hcl/"
+ InputFolderName);
            Microsoft.SharePoint.Client.ListItemCollection listItems = list.GetItems(camlQueryForItem);
            context.Load(listItems);
            context.ExecuteQuery();
if (listItems.Count > 0)
                retStatus =
true.ToString();
else
                retStatus =
false.ToString();
catch (Exception ex)
            retStatus =
"X02";
return retStatus;
thanks
Sundhar

Hi Sundhar,
According to your description, you might want to check the existence of sub folder in a folder of a library using Client Object Model.
Please take the code demo below for a try, it will check whether there is sub folder in a given folder:
public static void createSubFolder(string siteUrl, string libName, string folderServerRelativeUrl)
ClientContext clientContext = new ClientContext(siteUrl);
List list = clientContext.Web.Lists.GetByTitle(libName);
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FSObjType' />
<Value Type='Integer'>1</Value>
</Eq>
</Where>
</Query>
</View>";
//camlQuery.FolderServerRelativeUrl = "/Lib1/folder1";
camlQuery.FolderServerRelativeUrl = folderServerRelativeUrl;
ListItemCollection items = list.GetItems(camlQuery);
clientContext.Load(items);
clientContext.ExecuteQuery();
Console.WriteLine(items.Count);
if (0 == items.Count)
//create sub folder here
Best regards
Patrick Liang
TechNet Community Support

I am looking for assistence how to import an existing website in Dreamweaver CS4

I need help to import an existing website in Dreamweaver CS4

Only have one Dreamweaver CS4 installed, trying to get my DW CS4 disk I
bought installed on computer (done) I only need to figure out how to link
my website to the DW CS4 on my second computer.
L. Francesca Ferrari, L.Ac., DTCM, DMQ (China)
Ferrari Center of Chinese Medicine
222 Forest Avenue
Pacific Grove, CA 93950
831.818.3993
www.francescaferrari.com
L. Francesca Ferrari, L.Ac., DMQ (China)
Department Chair Medical Qigong Science
Five Branches University
This message, together with any attachments, is intended only for the use of
the individual or entity to which it is addressed and may contain
information that is confidential and prohibited from disclosure. If you are
not the intended recipient, you are hereby notified that any dissemination,
or copying of this message, or any attachment, is strictly prohibited. If
you have received this message in error, please notify the original sender
immediately by telephone or by return e-mail and delete this message, along
with any attachments, from your computer.
From: "Nancy O." <[email protected]>
Reply-To: <[email protected]>
Date: Sat, 04 Sep 2010 18:34:03 -0600
To: Francesca Ferrari <[email protected]>
Subject: i am looking for assistence how to import an existing
website in Dreamweaver CS4
>> I do not know where the site files are. They are on my initial Mac laptop
>> computer, and I use Hostway as my server.
Do you mean you lost your local copy of your site files from on an old
computer?
Log-in to your Remote Server and GET the site files using DW or your favorite
FTP application (Cute, Filezilla, WS_ftp, etc....)
>> But I was distinctly told my the call yesterday with Adobe that I must have
>> CS5 to get my website, www.francescaferrari.com with Dreamweaver on my
>> second computer.
Which version of DW did you have before?
How many installations of DW did you have? You can have up to 2 at a time.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
>

How is Output determination done for a PO ??

Hi
How is Output determination done for a PO ??
I need the O/P to the vendor sent in the form of a PDF file.
is it possible !!
cheers
Maruthi

Hi,
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document.
Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Thanks,

How determine repository for existing IDM instance

Similar Messages

Maybe you are looking for