How Display Standard Help for a Message?

I have a program that executes a Call Transaction. When it returns an error message, I write the message to a report.
I would like to define a hotspot on the report so that the user can click on the message and get the standard long text for the message. This would be equivalent to the result you get when you click on a message at the bottom of a screen.
Is there a standard function module that would provide this feature?

Check This FM DOCU_CALL
Regards,
Naimesh Patel

Similar Messages

How to display Help for the message in our program

Hi Experts,
Do any one know how to display the HELP for the Message in our ABAP program? Just like the user click the Long Text button in SE91.Do we have any function modules or Class method to do that? Thanks in advance.
Joe

Hi Joe,
While creating a message class in se93, theres a button (documentation) on the application tool bar. Click on that and you will be lead to a text editor where you can fill in the necessary documentation for the message you have created.

In itunes I am recieving a message that says "Accessing itunes Store..." Can anyone help for this message to go away?? It happens whenever I click anywhere in Itunes.

In itunes I am recieving a message that says "Accessing Itunes Store..." Can anyone help for this message to go away??? It happens whenever I click anywhere in Itunes.

Your shift key may be stuck in the down position.

Can you use a single webhelp file to display different help for two apps?

I have updated a WebHelp project for a Windows app (let’s call it App1). Now the Dev team is creating a separately installed app (lets call it App2) that shares some of the same Help information as the original app. Both apps can be installed on the same system. The Help for App1 is accessed from an About menu in the app UI. Some of the topics are dialog boxes accessed from a question mark icon (?) at the bottom of the UI (I assume map IDs are involved in hooking up the dialog box Help - I need to verify this with Dev). The Help for App2 will be accessed from the App2 UI, which looks very similar to the App1 UI, except that certain features in App1 are missing from App2.
Here are the parameters:
In some cases, entire Help topics will apply to both apps.
In some cases, a portion of a topic for App1 will also apply to App2.
In some cases, a topic or topic portion for App 1 does not apply to App2 and vice versa
I’m using Robohelp 9 (RH9). Is there a way to allow App1 to display only the WebHelp that is relevant to that app and for App2 to display only the WebHelp that is relevant to that app? Is there a solution that would allow me to use one Help project and build only one Help file, with the result that App 1 displays only the Help it needs and App 2 displays only the Help it needs? Would conditionalizing the Help and providing two sets of WebHelp be the solution? Or is there some other alternative?

You could do it in a couple of ways – one way is to have 1 project & use conditions to generate 2 flavours of WebHelp output, one for each App; the other way would be to use one project and create DUCC flavoured WebHelp – that way the use would choose to read the appropriate flavour of help for their App.

How to Send Emails for failed messages without using Alert

Hi Experts,
In our project, we need to trigger Emails for the failed messages in SXMB_MONI / Adapter Engine without using Alert Framewrok.
Please let me know the below :
1. Is this really possible to avoid Alert?
2. If possible, then can we accomplish this by creating any PI Scenario? Please provide me some knowledge.
3. Can we do it by writing any ABAP Code? If ABAP report can make it, then please provide me the code/ tables which will be needed. If any Blog/ Wiki is there, then please let me know the URLs.
Thanks,
Nabendu.

Hi Nabendu,
If your customer asks for mails with specific text for message failure, tell that it is not possible. Because Message will go through several engines like Adapter Engine, Integration Engine, BPE. You can not generate mails for the message failures in all these areas with out standard alert mechanism. These are pure technical alerts which only PI people can understand, not business alerts.
Example: assume your sender channel is unable to connect FTP Server, in this case you can not generate even though you will develop adapter module to generate alerts.
So for message validation only you can send mails not for message failures.
thanks,
madhu

Need help for new message type for PO archiving

Hello All
I have configured new message type ZARR for PO archiving process. After configuring all the steps this condition is not getting picked to by itself. And after maintaing it manually it is giving red flag without any error message. Here I am listing all the step that I have followed for config. Please help me am I missing something or any parameter is wrong.
Steps for new Message Type for PO Archiving
1.     Defined new Table 513 Purch.Org./Plant.
2.     Defined new access sequence Z513 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 21
Table = 513
Description = Purch.Org./Plant
Requirement = 101
Exclusive = Yes (box checked)
3.     Maintain Output Type ZARR for PO
General Data
Access Sequence = Z513
Access to condition (Checked)
Multiple Issuing (Checked)
Program = FM06AEND
FORM Routine = CHANGE_FLAG
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = Print Out
Storage System
Storage Mode = Archive Only
Document Type = ARCHIVE
Mail Title and texts
Language = EN
Title = Archiving for Legal Requirement
Processing Routines
Transmission Medium = 1 (Print Out)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = ZJ_9H_MEDRUCK
Partner Roles
Medium = Print Out
Funct = VN
Name = Vendor
4.     Fine-Tuned Control: Purchase Order
Oprat. = 1
CType = ZARR
Name = Testing for Archivin
Short Text = New
Update Print Related Data = Yes (checked)
Oprat. = 2
CType = ZARR
Name = Testing for Archivin
Short Text = Change
Update Print Related Data = Yes (checked)
5.     Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1
Step = 100
Cntr = 1
CTyp = ZARR
Description = Testing for Archivin
Requirement = 101
6.     Assign Schema to Purchase Order
Procedure RMBEF1
7.     Define Partner Roles for Purchase Order
Out. = ZARR
Med = 1 (Printout)
Funct = VN
Name = Testing for Archivin
Name = Vendor
8.     Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Plant = 24
Partner Funct = VN
Medium = 1 (Printout)
Date/Time = 4 Send immediately (when saving application)
Output Device = HUL1
Storage Mode = Archiving only
Thanks
Ankit

the problem is the Exclusive = Yes indicator in the access sequence.
Your other message has this exclusive indicator as well.
so if the first message is found, then no other message wil be determined
to allow several messages in one PO, you must not set this exlusive indicator

How to create help for java application

Thanks very much for any suggestions how to create help file for java application

how to set up the environment variable JAVAHELP_HOME

How to get MessageSecurityConstants for a message

Hi,
I need to get the MessageSecurityConstants for a message (mail, appointment, etc...).
I looked at the Object API document and could not find a way to get it.
Please let me know a way.
I am using GroupWise 8.
Thanks,
Hilmi.

There is not in the ObjectAPI. You would have to use the
SOAP API.
>>> On Friday, October 16, 2009 at 7:46 AM,
hilmij<[email protected]>
wrote:
> Hi,
> I need to get the MessageSecurityConstants for a message (mail,
> appointment, etc...).
>
> I looked at the Object API document and could not find a way to get
> it.
>
> Please let me know a way.
>
> I am using GroupWise 8.
>
> Thanks,
> Hilmi.

How to display f4 help for a field based on value of another field

Hello All,
I have 4 fields : Sales Org : VBAK-VKORG, Distrib Channel : RV50A-VTWEG, Div : RV50A-SPART, Sold-to-party : KUAGV-KUNNR.
The second field depends on the first one, the third on the second one and the fourth on the first field.
However, when each of the second third and fourth fields' f4 help is displayed, the values are independent of the previous fields. How do I set the f4 help to display values based on the respective fields?
Regards,
Mithun

Please be sure that you are searching the forums before posting. This exact same question was asked just yesterday:
F4 help to input field
In particular study the section and the linked help document for ddic search helps export/importing parameters and the requirements for DDic Structure/table usage for the parameter mapping.

How to get standard settings for instant messaging...

I'm using nokia 3120 classic. It have IMs but i can't chat Yahoo. Please guide me for details to getting standard settings internet. Thanks so much!

how can i get INSTANT MESSAGING SETTING.

How to restrist access for a message type

how do we insert A-HQ, HS-Z , 0-9 in the Message type (EDI_MES) for the auth object S_IDOCMONI, here we are just excluding all the values that start with HR. This will not give the users access to HR messages

Hi renjy,
S_IDOCMONI has the following fields:
ACTVT Activity
EDI_DIR Direction for IDoc
EDI_MES Message Type
EDI_PRN Partner number
EDI_PRT Partner Type
EDI_TCD Transaction Code
The values entered in EDI_MES are permitted message types. So just use the following combination to restrict the user from displaying HR message types.
EDI_MES----> A* to HQ, HS to Z, 0 to 9*.
To do this:
PFCG->Enter into the role>Open Authorizations>Search for object S_IDOCMONI -> Open the field EDI_MES-> Enter the range mentioned above-------> Save and generate.
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh

How to change number for support message in satellite system

Hi,
When i'm creating the messages in the satellite sytem the messages are generating with internal number range(0000002345) of solman.I would like to change to external number as (9999000000).
Please help me to resolve the issue.
Regards,
Eswar.

Hello,
SPRO > Solution Manager > Basic Settings > Scenario Specific Settings > Service Desk > Check Number Range for Service Desk Message
Check Number Range for Service Desk Message
Use
In this Customizing activity, you check the new internal and external number ranges for the Service Desk.
Activities
1. Select the transaction type SLFN.
2. Choose Goto -> Details.
3. Check the internal number range 01 and the external number range 02 under Transaction / Numbering.
4. Save your entries.
I hope this helps.
Regards,
Paul

How to provide hyperlink for CSN message in email notification

Hi,
I have the following requirement, could anyone provide some ideas/solution on this.
We integrated Change Notification Service to portal as transaction iView. once the CSN is raised and assigned to resopnsible person, the message will be notified through email. The requirement is in the email notification a hyperlink should be provided so that on clicking on the link it should open the page with respective CSN message.
Could any one provide solution how to achieve this?
Thanks in advance.
Regards,
Ravi.

Yes you can do that. using the fieldcatalog there is an option for that. give HOT_SPOT = 'X'. for the column you want.
wa_field-hotspot = 'X'.
REPORT ztest_alv.
TYPE-POOLS:slis.
DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
     wa_field LIKE LINE OF it_fieldcat.
DATA: BEGIN OF it_likp OCCURS 0,
       vbeln TYPE likp-vbeln,
      END OF it_likp.
DATA: layout TYPE slis_layout_alv.
wa_field-fieldname = 'VBELN'.
wa_field-tabname = 'IT_LIKP'.
wa_field-hotspot = 'X'.
wa_field-outputlen = 10.
wa_field-no_zero = 'X'.
wa_field-seltext_l = 'Sales'.
APPEND wa_field TO it_fieldcat.
SELECT vbeln FROM likp
UP TO 10 ROWS
INTO TABLE it_likp.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program      = sy-repid
    is_layout               = layout
    i_callback_user_command = 'USER_COMMAND'
    it_fieldcat             = it_fieldcat
TABLES
    t_outtab                = it_likp
EXCEPTIONS
    program_error           = 1.
*&      Form user_Command
*       text
*      -->UCOMM      text
*      -->SELFIELD   text
FORM user_command USING ucomm TYPE sy-ucomm
                    selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      SET PARAMETER ID 'VL' FIELD selfield-value.
      CALL TRANSACTION 'VL02N' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_Command

How to make EOIO for proxy messages in PI

Hi Experts,
We got different proxy outbound messages from ERP, we need to process all the messages in a sequence as it was sent from ERP, how can we make one queue in PI for all these messages.
Please give me some thoughts for this issue.

Refer to these blogs:
XI: Reliable Messaging u2013 EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
ABAP PROXY TO FILE u2013 Handling Heavy Volumes in SAP PI
/people/praveen.gujjeti/blog/2010/05/31/abap-proxy-to-file-150-handling-heavy-volumes-in-sap-pi
Regards
Raj

How application module helps for performance improve

Hi Everyone,
I have a sample web-application in which I am connecting with single AM instance (AM for database view object), retrieving some information and then close the connection. I am doing this as,
// making AM instance
<application module instance> = Configuration.createRootApplicationModule(<AM name>, config);
// performing operations
<operation result> = <application module instance>.<access VO with any operation>();
System.out.println("Get result here");
// disconnecting AM instance
<application module instance>.getDBTransaction().disconnect();
Configuration.releaseRootApplicationModule(<application module instance>, true);
These are the activities which are performed by a single user. Now, I am doing stress test on same activities. I am testing the same code with 300 concurrent users (using JMeter with JSP URL). These are working fine. Also I checked multiple times, it always working fine.
Now, I need to do something through which I can improve the performance. I know, I can use AM pool configurations to make this more effective. I have gone through the Oracle documents and checked the same test case with default or recommended pool configurations and I found similar kind of results (there is not much difference).
On other hand, I tried with 'releaseRootApplicationModule' method with false parameter and found better results in default as well as recommended pool configurations.
My question is, is the change of pool configurations recommended by Oracle really work? or do I need to concentrate more on coding part with default pool configurations?
Here, I would like to know, what are the best practice (in code as well as pool configurations), I need to follow if I really want to improve the performance in real scenarios (when our application will access with large no. of concurrent users).
I really look forward some help from experts. I have given a lot of time on this to know how really we can make our application more effective in terms of performance.
I really appreciate for your reply.
Regards,
Dilip Gupta.

>
We added the createRootApplicationModule() API (in the oracle.jbo.client.Configuration class) to simplify acquiring an application module from the pool for brief programmatic manipulation before it is released back to the AM pool.
Steve Muench.
>
check [url http://radio-weblogs.com/0118231/2009/08/20.html#a959]Check Your App for Misuse of Configuration.createRootApplicationModule()
Edited by: Mohammad Jabr on May 10, 2012 7:14 AM

How Display Standard Help for a Message?

Similar Messages

Maybe you are looking for