How do CVI7.0 runtime engine and TestStand3​.0 runtime engine work in a test system?

I developed code modules from CVI 7.0, and test sequence from TestStand 3.0. Now I want to deploy all to a test system. Should I create distribution kits for CVI and TestStand, and install to a target PC? Do each kit include the RTE? How do the runtime engine work in a system?

hp7550,
I saw your post earlier entitled "what is a run-time engine?". It looks like this post is addressing the same issue.
To answer your questions, it is not necessary to create a distribution kit for your CVI code modules. You can simply install the CVI Run-time Engine, which you can find if you go to www.ni.com and click on the Drivers and Updates link on the left-hand side.
Then you will need to deploy your TestStand system using Tools >> Deploy TestStand System in the Sequence Editor. That tool will go out and gather all the CVI code modules your sequence calls - unless you are calling a DLL or something dynamically inside of a code module; in which case, you need to add that dynamically called DLL (or code module) to your TestStand workspace.
To install the TestStand Run-time Engine, make sure the Install TestStand Engine option is checked on the Installer Options tab of the deployment utility. You can customize what gets installed with the engine by clicking on the Engine Options.
For more information on deployment, see Chapter 14 of the TestStand Reference manual (Help >> Search the TestStand Bookshelf...).
To answer your last question a run-time engine simply gives you access to the compiled code that corresponds to the functions you used from the CVI or TestStand libraries during development.
I hope that helps.
Best Regards,
Matt P.
Applications Engineer
National Instruments

Similar Messages

  • Iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?

    iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?
    the iphone 4S has been in recovery mode for a long time and i have tried to press and hold the power and home buttons until the apple symbols comes on the screen again but it stay on the screen until the screen turns off and doesn't come back on to the home screen and have tried to sync with mac and doesn't do anything it does display the itunes and cable icons for a while but then goes back to the apple symbol and doers nothing what can I do to fix this  and not loose what is on the phone at all?

    Hi, simonRM.  
    Thank you for visiting Apple Support Communities. 
    I understand that you are unable to restore your iPhone.  Here are the best troubleshooting resources to start with when not being able to update or restore your iPhone.
    If you can't update or restore your iPhone, iPad, or iPod touch
    Resolve iOS update and restore errors in iTunes
    -Jason H.  

  • How do I re-download and install Acrobat 11 Standard - after I wiped my system installing Win 8?

    How do I re-download and install Acrobat 11 Standard - after I wiped my system installing Win 8?

    There is no trial version for Acrobat XI Standard. What Leonard suggested would work for Pro however.
    If you purchased Acrobat via a download from Adobe, you can re-download by going to the "My Orders" page on Adobe's web site (https://www.adobe.com/account/account-orders.html). You would also find you serial number there. If this does not work, you can download the software from here: Download Acrobat products | Standard, Pro | XI, X - if you've registered your software, you can lookup your serial number here: https://www.adobe.com/account/my-products-services.html#MyProductsHeader

  • I keep getting a message that itunes incorrectly tried to run the C runtime library and now itunes won't work anyone know how to fix it?

    My computer keeps telling me that itunes tried to incorrectly run the C runtime library and now I can't get into it, I've tried uninstalling and reinstalling it but nothing is working

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Diff between oracle 8i sql Engine and oracle 9i sql Engine

    hi,
    1)Can anyone tell me difference between oracle8i sql engine and 9i sql engine.
    2)Does oracle 9i uses the index defaultly if any primary key is there in table
    Thanks
    Rama

    > 1)Can anyone tell me difference between oracle8i
    sql engine and 9i sql engine.
    They are different versions.
    If you have been expecting a list of differences and enhancements and new product features... forget it. It will take several pages to list. Rather refer to the 9i product feature sheet.
    > 2)Does oracle 9i uses the index defaultly if any
    primary key is there in table
    Huh? Oracle will use an index if it determines that it costs less to use that index to get to the data, than not using an index.

  • How to proper resize images and videos at runtime without losing quality?

    Hi guys. I need a bit of help here.
    I've built a flash site in which i want to resize a movie to the stage. I do it by keeping the proportion, thus i only resize the width and then i resize the height acordingly to the new width but keeping the proportion.
    The problem is that my film still looks "pixeled".
    I found a website on which the stage resizes dinamically with the movie and the background images without either of them losing quality. Till now i knew that resizing images or videos in flash at authoring or runtime produces pixeled results.
    This is the website: http://kampanjeweb.apt.no/jotun/romforrom/. Can someone tell me how do they do it without losing quality? just make the browser windowed and resize the margins to see the effect.
    Thanks.

    Hello, Venian.
    About the video, you could try setting the flash.media.Video's smoothing property to TRUE. This should keep a quality, but you can do nothing if the video has a poor quality. You need a great video.
    About the images, you you need to redraw the image each time you resize it. To achieve it, use a combination of Bitmap, BitmapData and Matrix classes. Any doubt, just call again. Here is a simple example:
    var scale:Number = .5;
    var highQualitySourceImage:Bitmap = ...your image...;
    var scaleMatrix:Matrix = new Matrix();
         scaleMatrix.scale(scale, scale);
    var bitmapData:BitmapData = new BitmapData( scale*highQualitySourceImage.width, scale*highQualitySourceImage.height);
         bitmapData.draw(highQualitySourceImage, scaleMatrix);
    var finalBitmap:Bitmap = new Bitmap(bitmapData);
    addChild( finalBitmap );
    Cheers,
    CaioToOn!

  • File adapter - How to pass File name and path at runtime

    Hi gurus,
    We want to use PI 7.0 as an ftp server and expose the config as a webservice where the service consumer can pass one or more file names and the path to pick them and drop them on a fixed ftp server.
    So precisely, I need to be able to set the file name, target directory parameters in both sender and receiver file/ftp adapters at runtime. is this possible at all ?
    I am aware of passing Adapter specific parameters from sender file adapter to receiver file adapter to create the same folder structure and file names. But my requirement is different. I hope I am clear.
    Could I please get some advise on this .
    Thanks & Kind Regards,
    Jhansi.

    Hi Jhansi,
    Either you can go ahead with dynamic configuration as said by other SDN'ers. Else can go with Java Mapping:
    Here is the code for Java Mapping:
    import com.sap.aii.mapping.api.*;
    import java.io.*;
    import java.text.*;
    import java.util.*;
    public class GetDynamicConfiguration implements StreamTransformation {
    private Map param;
    public void setParameter(Map map1) {
    this.param = map1;
    public void execute(InputStream inputstream, OutputStream outputstream) throws StreamTransformationException {
    try {
    AbstractTrace trace = null;
    // a) Set ouput File name
    String directory=null;
    trace = (AbstractTrace)param.get(StreamTransformationConstants.MAPPING_TRACE );
    param.put(DynamicConfigurationKey.create("http://sap.com/xi/XI/Dynamic", StreamTransformationConstants.DYNAMIC_CONFIGURATION), "");
    DynamicConfiguration conf = (DynamicConfiguration) param.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
    DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
    String filename =conf.get(key);
    conf.put(key, filename);
    trace.addInfo("File name is "+filename);
    if(filename.equals("in.txt"))
    directory = "/home/ftpxi/in";
    if(filename.equals("test.txt"))
    directory = "/home/ftpxi/in/test";
    if(filename.equals("shweta27.txt"))
    directory = "/home/ftpxi/in/test";
    trace.addInfo("Directory name is "+directory);
    conf.put(key1, directory);
    // b) Just copy input file to output file
    byte[] b = new bytehttp://inputstream.available();
    inputstream.read(b);
    outputstream.write(b);
    } catch (Exception exception) {
    exception.printStackTrace();

  • How to set field width and height at runtime programatically?

    Hi all,
    I want to set the width and height of a report field by reading its values from the database table.
    Is it possible in Oracle reports?
    How to achieve this in Oracle reports 10g?
    Any help will be highly appreciated.
    Thanks .... Best Regards
    Bilal

    You cannot give it a specific value. During design you can set Horizontal and Vertical Elasticity properties to Variable, so the items are automatically scaled when running the report.

  • How to create simple JSP and deploy to J2EE engine?

    Hi,
    I need to create simple JSP pages and deploy it to SAP J2EE engine.. what is the procedure?...I may later add some businness logic but not needed for now.
    Please help
    Thanks,
    Jai

    Gabrie,
    Here are Simple steps,
    In the NWDS
    1) create J2EE -> Web Module Project    (XYZ)
    2) create/add your JSP pages to the project
    3) Right click on your project root and click on 'Build Web Archive' from the context
    3) create J2EE -> Enterprise Application project(EAR)
    4) Right click on your Web Module Project root and click on 'Add to EAR Project' from the context, select the EAR you just created in step 3.
    5)Right click on your EAR project root and click on 'Build WebApplication Archive' from the context
    6)Expand the EAR project node, and right click on the *.ear file, click on 'Deploy to J2EE Engine'.
    7)Enter your SDM password  when prompted,
    You can access you JSP at this url
    http://server:port/xyz/a.jsp
    - Dileep

  • HOW DO I INSTALL  DISK OF MY NEW  10.6 SNOW LEOPARD ? NEW MAC DO NOT HAVE DVD ACCESS .  BUT  I  WORK ON  OLD MAC 10.4.11 TIGER  THAT  DO  HAVE  DVD ACCESS .  HOW DO I CONNECT   NEW AND OLD  TO MAKE IT WORK ? THANKS

    HOW DO I INSTALL DISK OF NEW 10.6 SNOW LEOPARD ? NEW MAC DO NOT HAVE DVD  ACCESS .  BUT I WORK ON OLD  MAC 10.4. TIGER  THAT DO  HAVE DVD PLAYER .  I KNOW  THAT SHOULD  BE  EAZY .  THANKS

    You'll need to provide some more information .... what current mac mini do you have? Click on the apple in the left corner of the menu bar, click about this mac, and what does it say for processor, memory, and os x version?
    When you say you have no DVD, do you have the mac mini server or is the DVD broken?
    You can't do anything with 10.6 Snow Leopard on a PowerPC mini, however, if it is an Intel-based mini, you could probably hook up the systems in target disk mode to install 10.6.

  • The Guide on How To Reformat, Repartitio​n AND Get RapidStart & RapidStora​ge Working!

    Intro: I bought a U310 a few days ago, and decided to take advantage of the Win8 upgrade.  I downloaded it, and via the Upgrade Advisor had it copied to a bootable USB drive.  You can also burn the ISO to a DVD.  I read about a ton of problems repartitioning and doing fresh installs online, so I decided to give it a shot myself.
    *NOTE - NO BIOS settings related to RAID, AHCI or Compatibility mode need to be changed.  If you have the HDD+SSD combo, LEAVE IT on RAID.
    *NOTE 2 - All of these files retained their original download names.  They are all from Intels website.  You can find them, but it can be difficult, their website is a bit hard to navigate.  Feel free to get them from their though if you're not comfortable.
    First Steps: First, you will need your Win7 or Win8 disk.  I used 64 bit, so for all intents and purposes, all drivers listed here will be the 64 bit variety.  After you have your installation media, head over to Intels website and attain the following drivers.
    http://www.filehosting.org/file/details/390409/f6f​lpy-x64.zip
    These are the Intel Rapid Storage RAID drivers.  You will need these for windows setup.  Download the ZIP, and extract the contents to a USB flash drive.  
    Beginning the Installation: Pop your Win7/Win8 installation media in, reboot the computer and press FN+F12 to bring the boot menu up.  Choose where your installation media is (USB, CD ROM).  Start the setup as normal.  You will reach the point where it asks to choose a hard drive to install WIndows to.  There will be none - do not panic.  This is where the USB drive comes in handy.  
    Click browse, go to your USB drive and browse to the folder where the drivers you put in it are.  Windows will identify it, make sure it is clicked and click Next.  Then all of your drives and respective partitions will appear.  
    Delete all the things: Delete all of your partitions.  Seriously, get rid of 'em.  You will be left with your 500GB disk, unpartitioned - and a 8GB drive, unpartitioned - this is your SSD.  It only shows up as 8GB because 22GB of that is dedicated to RapidStorage cache, due to the driver you just installed.  Now create a partition on the main HDD and let windows create the other necessary ones.  Click next to continue installation.
    Once windows finishes installing: You will need the RapidStorage drivers now.  You can get these here.
    http://www.filehosting.org/file/details/390411/iat​a_enu.exe
    Install those, and then open up "Intel Rapid Storage Technology."  This can be found in your Start Menu under the Intel folder.  It should be automatically set up to accelerate your main drive.  You will also see it has identified your SSD as the proper size, 30GB (32GB).  
    Link to picture
    If not, it is relatively easy to set up.  Choose the drive you want to accelerate, and the SSD you want to use as cache.  This would be the 22GB partition.    
    RapidStart: Now, you will set up your RapidStart.  This part is optional, but I wanted complete functionality.  This is what "replaces" windows Hibernation with Intels own rendition.  To do this, you will need to open up Computer Management.  If you are running Win7, search from the start menu "Computer Mangement" (you can do the same on Win8, just start typing on the Start Screen).  Click the application.  
    Click Storage, then Disk Management.  Right click your 8.00GB partition, and click Create Simple Volume.   Choose DO NOT FORMAT, and create it to maximum capacity (this will already be chosen).  Once you click next next blah blah, it will have a blue bar over it and it wil say 8.00GB  RAW.  
    Setting the Hibernation Parition: Now, press the Windows Key & R to bring up the Run box.  Type diskpart and press enter.  Type list disk and press enter.  
    Now type select disk 0, or what ever number disk corresponds to your SSD.  Next, type list part and Partition 1 should be listed.  Finally, type select partition 1.  Once that is selected, type set id=84 override.  If you go back into Computer Management, the disk will now be listed as mine is in the picture a ways up - Hibernation Partition.  
    SUCCESS!  You are doing good so far.  Now, download the Rapid Start management software here.
    http://www.filehosting.org/file/details/390414/Rap​id_Start_Win7_2.1.0.1002.exe
    Install this and reboot your PC.  Once you have rebooted, click Start, go to Intel and find Intel Rapid Start Technology Manager.  It should look like this.  You can set your own time to hibernation.
    To Confirm: Reboot, press Fn+F2 like a maniac until you get into the BIOS.  Find Intel RapidStart.
    Link to picture
    Arrow down and click on it, and it should Not say INVALID but instead it should say ESTABLISHED.
    Link to picture
    Congrats!  You are all set up!  I also used this guide loosely to help with the diskpart stuff.  Hope this all works out for you, it worked great for me!
    Nick
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
    Solved!
    Go to Solution.

    TheJapalian wrote:
    Should this guide work well for the y580 with ssd and hdd?
    Hi
    This would work for all laptops having the ssd cache disk by default.
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • How I fixed my iPhone and got the update to work...

    This sounds silly, but I just kept un-docking my iPhone and then re-docking it. If the error message came up, I clicked "OK" and did it over again. After about the eighth try, it went through and my iPhone is now updated. Hope this helps.

    I talked to AT&T support. They say that the Apple activation servers are down. Should be fixed "within an hour".
    So much for the stupid activation scheme via iTunes . There doesn't even appear a backup to do the activation over the phone.
    Apple seems to have a bad week.

  • How to set the IP and MAC address in C program?

    My working environment is Sun250 Server, Solaris 7 operating system. I encountered a problem ---- How to set the IP and MAC address in C program to make the system change it IP & MAC at runtime?
    Any idea is welcome! Thanks!

    Hi
    As a simplest possible solution, you can use the system command
    to run ifconfig that can set both the mac address and the IP address of the system. You will have to use setuid though.
    Or you can use the DLPI calls ( do a man DLPI or search for a
    Sun documentation on the same at http://soldc.sun.com) to write
    a pure C program.
    HTH
    Shridhar

  • How to start the ServiceRegistery and AccessManager

    I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) I used a Configure Now installation on my WindowsXP. Everything went fine and after installation I was able to go to
    http://localhost:6480/soar/index.jsp
    and
    http://localhost:8080/amserver/UI/Login
    when going to AccessManager Console what is the login username/password as I am unable to log-in
    Then I restarted the box but after that I am not able to go to these pages it says page not found
    I tried the following but gives errors. How do I start ServiceRegistery and AccessManager
    C:\Sun\JavaES5\identity\bin>amserver stop
    System error 1060 has occurred.
    The specified service does not exist as an installed service.
    C:\Sun\JavaES5\identity\bin>amserver start
    The service name is invalid.
    More help is available by typing NET HELPMSG 2185.
    The service name is invalid.
    More help is available by typing NET HELPMSG 2185.Any help is appreciated.
    Thanks

    KM will install with portal itself
    after logging into portal goto -- content admin -- km content
    and for collobration follow below steps to activate
    Content Administration ® Portal Content ®  Portal Users ® Standard Portal Users ® Default Framework Page
    Double-click Default Framework Page.
    Select the Tool Area iView checkbox.
    Choose Open. The Property Editor page displays.
    Choose Show All in the Property Category drop list menu.
    Choose Enable Collaboration Lauch Pad properties. 
    Select Yes radio button.
    Choose Save
    Choose Close.
    Choose F5 to refresh your portal screen.
    now u can see collabaration link in tool area.
    Regards
    Krishna.

  • How to generate TDS certifcate and CHallan forms

    Hello All,
    How to generate TDS cerficates and challan forms for Pakistan withholding tax in ECC system,
    Regards,
    Ramana

    Hi,
    Check whether you have activated Withholding tax for your company code and country.  Each country has
    its own versions like India has Country India Version.  Check with SAP the version for Pakistan whether
    there is any country specific functionality.  Ofcourse, you can use the other versions if the same
    parameters suits the tax classification if your country.
    Regards,
    Sadashivan

Maybe you are looking for

  • What does 'waiting' mean on a doc in iCloud?

    I use iCloud to store my Numbers documents. I have used only .22 GB of space so far. I have a several Numbers doc in the cloud of my MacBook Pro. The most recent doc has the word "waiting" underneath it. The doc opens OK on my MacBook; I don't see it

  • Cascading a wireless WRT600N to a wired BEFSR81 to the Internet

    Okay, here is an easy one. I am trying to daisy chain a new WRT600N wireless router to an older BEFSR81 8-port router.  Here is the setup up.  Cable modem is wired to the WAN jack on the 8-port.  5 computers (Win98 or Win 2000) wired into the common

  • Not recording from USB keyboard using sound module

    I have a USB keyboard and Poizone sound module but nothing gets recorded into AA3 when I record to a track. Track is armed to record, soundcard is selected (analog in) but nothing. What am I overlooking? Thanks.

  • Value date while posting from FRFT_B

    Hi When I am posting from FRFT_B (Bank to Bank transfer) value is date is displaying in this transaction(FRFT_B) but when we posted document , value date is not updating in FI document hence we are not able to see value date. Can some one hlpe is the

  • Export CS2 action for CS3?

    I have both AI-CS2 and AI-CS3 on my machine because of a new install of CS3 rather than an upgrade. This means any actions I had in CS2 aren't available now in CS3. I was hoping importing them wouldn't be too hard, but apparently it is. The only Acti