How do i add a new field in the screen "Creat without resource(lso_pv10)"

Hi , Guys:
I wish to add a time zone field which would associated with a course , the program should be able to find the right time zone for end-user according to the location id user choosed .
My questions are:
In order to leveraging SAP existing funtion(user-exit,badi.....)(if any) , Which infotype should i modify to add the time zone field ?

Hi
Did you get to resolv e this?
I am also required to do the same
Would appreciate if you could share your experiences.
Thanks
Regards
Madhu

Similar Messages

How can I add a new field in selection screen for this report

*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
        mseg,
        mch1,
        *mch1,
        mkpf,
        mchb ,
        makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
      wa_message_tab type esp1_message_wa_type ,
      sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout   type slis_layout_alv                     ,
      gt_fldcat   type slis_t_fieldcat_alv with header line,
      gt_header   type slis_t_listheader   with header line,
      gt_sortin   type slis_t_sortinfo_alv with header line,
      g_repid     like sy-repid                            .
define add-fieldcat.
gt_fldcat-fieldname     = &1.
gt_fldcat-ref_tabname   = &2.
gt_fldcat-seltext_s     = &3.
gt_fldcat-seltext_m     = &3.
gt_fldcat-seltext_l     = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt       = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
        sel   type xfeld,
        matnr type matnr,
        maktx type maktx,
        charg type charg_d,
        menge type menge_d,
        erfmg type erfmg,
       end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
      gv_code   like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
      gv_matdoc type bapi2017_gm_head_ret-mat_doc,
      gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
      with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
   exporting
     input = 'Z_ORAN'
   importing
     output = v_atinn.
call screen 100.
*&      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
    mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
         screen      like screen,
         index       type i,
         selected(1) type c,
         vislength   like icon-oleng,
         invisible(1) type c,
       end   of cols.
case ok_code.
    when 'DELE'.
      delete itab where sel eq 'X'.
    when 'ENTE'.
      check *mch1-charg is not initial.
      read table itab into witab with key charg = *mch1-charg.
      if not sy-subrc is initial.
        witab-charg = *mch1-charg.
        select single matnr from mch1 into witab-matnr
                           where charg eq witab-charg.
        if not syst-subrc is initial.
          set cursor field '*MCH1-CHARG'.
          message e115(12) with *mch1-charg.
        endif.
        select single maktx from makt into witab-maktx
                           where matnr eq witab-matnr
                             and spras eq syst-langu.
        witab-erfmg = 1.
        concatenate witab-matnr witab-charg into lv_objek .
        clear ls_inob .
        select single * into ls_inob
                        from inob
                        where objek = lv_objek and
                              klart = '023'    and
                              obtab = 'MCH1' .
        select single atflv from ausp into witab-menge
                 where objek = ls_inob-cuobj and
                       klart = '023' .
        append witab to itab.
**added
        clear *mch1-charg.
**added
      endif.
    when 'SAVE'.
      if mkpf-budat is initial.
        set cursor field 'MKPF-BUDAT'.
        message e055(00).
      endif.
      if mseg-lgort is initial.
        set cursor field 'MSEG-LGORT'.
        message e055(00).
      endif.
      if mseg-umlgo is initial.
        set cursor field 'MSEG-UMLGO'.
        message e055(00).
      endif.
      if mseg-bwart is initial.
        set cursor field 'MSEG-BWART'.
        message e055(00).
      endif.
      refresh imseg.
      loop at itab into witab.
        move-corresponding witab to wmseg.
        append wmseg to imseg.
      endloop.
      call function 'ZMM_POPUP_WITH_DATA'
        exporting
          imseg = imseg
        importing
          answer = answer.
      if answer eq 'Y'.
        perform create_goods_movement.
      endif.
    when 'P--'.
      clear ok_code.
      perform paging using 'P--'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P-'.
      clear ok_code.
      perform paging using 'P-'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P+'.
      clear ok_code.
      clear lines.
      perform paging using 'P+'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P++'.
      clear ok_code.
      perform paging using 'P++'.
      set cursor field 'MARA-MATNR' line 1.
    when 'SORA'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab ascending by (field).
      endif.
    when 'SORZ'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab descending by (field).
      endif.
    when 'PRNT'.
      perform write_alv.
endcase.
endmodule.                 " user_command_0100 INPUT
*&      Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule.                 " read_table OUTPUT
*&      Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule.                 " write_table INPUT
*&      Module exit INPUT
module exit input.
leave to screen 0 .
endmodule.                 " exit INPUT
*&      Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
    i_goodsmvt_items-material   = witab-matnr.
    i_goodsmvt_items-entry_qnt = witab-erfmg.
    i_goodsmvt_items-entry_uom = 'ST'.
    i_goodsmvt_items-move_type = mseg-bwart.
    i_goodsmvt_items-plant      = mseg-werks.
    i_goodsmvt_items-stge_loc   = mseg-lgort.
    i_goodsmvt_items-move_plant = mseg-umwrk.
    i_goodsmvt_items-move_stloc = mseg-umlgo.
    i_goodsmvt_items-batch      = witab-charg.
    append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
    perform determine_bapi_code using mseg-bwart
                             changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header = gv_header
      goodsmvt_code    = gv_code
    importing
      goodsmvt_headret = gv_headret
      materialdocument = gv_matdoc
      matdocumentyear = gv_matyear
    tables
      goodsmvt_item    = i_goodsmvt_items
      return           = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
    exit.
endloop.
if sy-subrc ne 0.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    wa_message_tab-msgid = 'M7'..
    wa_message_tab-msgty = 'S'.
    wa_message_tab-msgno = '060'.
    wa_message_tab-msgv1 = gv_matdoc.
    wa_message_tab-msgv2 = ''.
    wa_message_tab-msgv3 = ''.
    wa_message_tab-msgv4 = ''.
    append wa_message_tab to i_message_tab.
else.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
    loop at i_return.
      wa_message_tab-msgid = i_return-id.
      wa_message_tab-msgty = i_return-type.
      wa_message_tab-msgno = i_return-number.
      wa_message_tab-msgv1 = i_return-message_v1.
      wa_message_tab-msgv2 = i_return-message_v2.
      wa_message_tab-msgv3 = i_return-message_v3.
      wa_message_tab-msgv4 = i_return-message_v4.
      append wa_message_tab to i_message_tab.
    endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
    tables
      i_message_tab = i_message_tab.
endform.                    " create_goods_movement
*&      Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
    select single gmcode from t158g into p_code
    where tcode eq lt_t158b-tcode.
    if sy-subrc is initial.
      exit.
    endif.
endloop.
endform. " determine_bapi_code
*&      Form paging
form paging using code.
data: i type i,
        j type i.
case code.
    when 'P--'. tc_itab-top_line = 1.
    when 'P-'.
      tc_itab-top_line = tc_itab-top_line - line_count.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
    when 'P+'.
      i = tc_itab-top_line + line_count.
      j = tc_itab-lines - line_count + 1.
      if j le 0.
        j = 1.
      endif.
      if i le j.
        tc_itab-top_line = i.
      else.
        tc_itab-top_line = j.
      endif.
    when 'P++'.
      tc_itab-top_line = tc_itab-lines - line_count + 1.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
endcase.
endform.                    " paging
*&      Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_buffer_active        = ''
      i_callback_program     = g_repid
      i_save                 = 'A'
    i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = gs_layout
      it_fieldcat            = gt_fldcat[]
     it_sort                = gt_sortin[]
    tables
      t_outtab               = itab[].
endform.                    " write_alv
     Form find_list_header
form find_list_header.
data : v_datum(10),
         v_datlo(10),
         v_dathi(10),
         v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform.                    " find_list_header
     Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear   gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform.                    " fill_field_cat
     Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up            = 'X'.
gt_sortin-fieldname     = 'MATNR'. append gt_sortin.
endform.                    " fill_sortinfo
     Form top_of_page                                              *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      i_logo             = 'ZKUTAS'
      it_list_commentary = gt_header[].
endform.                    " top_of_page

HI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer

Add a new field in the Tab Addicional data en la ME22N

Hi,
Please, can anyone tell me how can we add a new field in the tab Addicional data en la ME21N? I have to use the MM06E005, but I don't know which screen exit should I use and also how to add this subcreen in the tab Addicional data.
Thanks in advance.
Saida.

Hi,
using SE80 you can add your fields with subscreens
SAPLXM06 0101 for Headerfields
SAPLXM06 0111 for Items.
This will add a tab in ME2..N.
if you want your own Text on the tabstrip just edit the Textsymbols
101 and 111 from SAPLXM06.
At output you have to open a module asking the gl_aktyp to switch edit/display mode.
then you must code the Exits to import/export values
EXIT_SAPMM06E_006
store transaction type for later modification of screen attributes
gl_aktyp = i_trtyp.
gl_no_screen = i_no_screen.
store current state of customer data in ekko_ci (structure for screen)
ekko_ci = i_ci_ekko.
store reference document
if i_rekko-ebeln ne gl_rekko-ebeln and
not i_rekko-ebeln is initial and
gl_rekko-ebeln is initial.
ekko_ci-zzemail = i_rekko-zzemail.
gl_rekko = i_rekko.
endif.
EXIT_SAPMM06E_007
move-corresponding i_ekko to gl_ekko_ci.
EXIT_SAPMM06E_008
e_ci_ekko = gl_ekko_ci.
ekko_ci contains the actual values of the Dynpro fields
e_ci_update is only set if you really want the fields
on the Dynpro to be saved. You must set it then to 'X'
the field ekko_ci-zzflag will here only be saved if there
was a change and the transaction is not in display mode
if gl_ekko_ci-zzemail ne ekko_ci-zzemail.
e_ci_ekko-zzemail = ekko_ci-zzemail.
if gl_aktyp ne 'A'.
e_ci_update = 'X'.
endif.
endif.
Regards
Kiran Sure

Report painter(Add a new field to the library)

Hi.
How do i add a new field to the characteristics of a library.
If the field is not at all existing in the characteristics list of the library.
Thanks and Regards,
Shabitha

Hi Shabitha,
just wondering if you ever found an answer to this, as i'm searching for info on same matter.
Thanks, Regards,
Okan Yarligan

How to modify (add a new field) existing SOAP data source ?

Dear Friends,
I am getting data from Legacy databases (from different Views) mapped to the BW through XI.
There is an existing SOAP Data source which is mapped to the non-R/3 source system Views through XI.
My question is:
Now I wanted to add a new field to the existing SOAP Data source, which will be mapped to the newly added field in the source system by XI.
Please advice how could I modify the existing SOAP data source?
Thanks,
Venkat

My plan is to add the new InfoObject(field)/BIC/ZXXX in the Datasource --> Map that field to the Info Object Zxxx in Comm Str. --> Extras (menu) --> Create BW Data source with SOAP connection --> Regenerate the PROXY --> so that now the XI guys could map the new Infoobject in my Datasource to the new field in the Legacy database tables
But why is that I am not able to add a new field in the Datasource ? I am trying this way: RSA1 --> Infosource tab --> Dbl. click on the existing Datasource --> here...I am trying to add new field in the Datasource...
is there any other special place where I could add a new field to the existing SOAP Datasource ?
Please help..?

How to add a new Field to the WEB User Interface in CRM 2007

Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.

Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S.

How to Add a new fields in the selection screen of LDB.

Hi All,
I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
So could you please tell me for that where i need to add the code for selecting the data.
Thanks
Roli

Hi
welcome to SDN forum
If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
if you wants to modify the std LDB of SAp means take the access key and to modify that code
if you add the extra field you have to modify the where conditions in the code also
see the doc
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Sample code
TABLES: SPFLI,
SFLIGHT,
SBOOK,
SCARR.
START-OF-SELECTION.
GET SPFLI.
WRITE:/ SPFLI: , SPFLI-CARRID, SPFLI-CONNID,
SPFLI-AIRPFROM, SPFLI-AIRPTO.
GET SFLIGHT.
WRITE:/ SFLIGHT: , SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
GET SBOOK.
WRITE:/ SBOOK: , SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
GET SFLIGHT LATE.
WRITE:/ GET SFLIGHT LATE: , SFLIGHT-FLDATE.
Regards
anji

Add a new field for the movement 551

Hey SAP folks,
I am having a situation that while doing the overage receipt(551) in MIGO transaction system having an option to enter the Purchase order number in the screen but not for PO item number.
When i went into the config under <b>Field selection for mvt type</b> , it doesn't give me an option to make an entry for 551 with PO item number.
Let me know how can we add a new fields that is not listed on F4 help under 551 mvt type in the config under <b>Field selection for mvt type</b>.
Thks,
JR.

Dear John,
Are you sure that mov type 551 is movement for receipt PO?Cause as i know 551 is Good issue for Scrapping.
Btw, you can check to this path :
IMG> Material management> Inventory management and physical Inventory>Setting for enjoy transaction>Setting for MIGO-
IMG> Material management> Inventory management and physical Inventory>Good issue/TP>Define screen layout
IMG> Material management> Inventory management and physical Inventory>Good receipt>Define screen layout.
Regards,
w1n

How do I add a new font to the list?

In "Tools/Options/Content/Advanced" how do I add a new font to the list? I have "Comic Sans MS" listed for one of the options, but the drop-down menu does not contain that option, so I can't select it for another font option.

Thanks for your reply.
As to your question: No, of course I wouldn't scroll down, it's in alphabetical order, so why would "C" for Comic Sans MS be anywhere but between B and D on the list?
Now a question for you: If person or group was going to alphabetize a list and then break it down into sublists, why would he, she, they not include headers for each portion and maybe even indent each font name, so a person might have a chance of getting the drift?
Also, how do you add new fonts to the list?

How do I add a new computer to the canning fuction on my

How do I add a new computer to the scanning function on my PIXMA MX870? I can send print jobs to it from the new computer, but it tells me to "Set the PC to start scanning" when I try to scan to it. The old computer still accepts scanned images when it is turned on.

Hi, Illiniboy67!
So that the Community can help you better, we will need to know exactly which operating system is running on the computer you're trying to connect to the scanner, and how it's connected (USB, ethernet, or wi-fi). That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

How do you add a new icon to the home screen?

How do you add a new icon to the home screen?

The only new icons you can add to your home screen are webclips, which can be added by using the "+" button in safari on the desired web page.
You won't be able to add new apps until February when the SDK is fully seeded to developers.

ICal Lion is infuriating. How can I add a new event in a chosen calendar without having to create it in my default then edit it?

iCal Lion is infuriating. How can I add a new event in a chosen calendar without having to create it in my default then edit it?

We are all entitled to our own opinions. So I respect you there brother
But then again, Apple has its own basis. iOS is what's selling like pancakes not Macs, so if the gazillions out there are using iOS device and have gotten used to the calendar in their iOS devices. Wouldn't you think it made sense if Lion has the same calendar look and feel?
Everything was considered and weighthed when they developed Lion. They even mentioned it in the press, They were blown away with the success of iOS so they are extending it to OSX.
Quite frankly, I like the old iCal but yeah I don't expect anything in SL to stay in Lion otherwise it'll be another Cat name related to Leopard
People should start looking at this perspective and not get STUCK in the old OS.

How can I back up my I Tunes library to an external hard drive? Also how do I add my new content to the back up?

How can I back up my I Tunes library to an external hard drive? Also how do I add my new content to the back up?

See this User Tip.
tt2

Need to add a new field in Milestone screen

Hi Gurus
I have a request to add a new field in milestone screen. Milestone under WBS element and Milestone under network.
Is there any Exit for the same ? can you tell me the different ways we can add a field in the screen
- Pithan

Hi,
i did create a new milestone usage. There i have the option to put "billing Plan Type", "Date Category" and "Start/Finish". I did not see an option where i can add a custom field. I also checked the node for "Billing Plan Types" and there also i saw only the standard screens / fields. Did i miss something here?
Thanks
Sreekanth

How can I add a new field for Belgium in T588M?

Hi experts,
I am trying to change the infotype 0002 screen for BElgium. This is how I am doing T588M > new entry > MP000200 > alt. screen 2012 > var. key 12 > feature p0002 >.
I also maintained 12 as the var. key for the countr yBE in P0002 feature. I want to add P0002-GBDEP (state) field which is already there for MP000200 screen 2000 which is the SAP standard screen. why it does not copy this field when I create this field for Belgium. HOw can I bring it for BEl. Please advise.
Thanks a ton,
JEss...

As P0002-GBDEP is not included in screen '2012', you'll need to create an additional custom screen to show this field. Then, you'll need to config table 'T582C' to have 'MP000200' / screen '2012' to have this custom screen as an 'include' screen (e.g. if your new custom screen is ZP000200 / screen '0100', then in T582C, you'll need an entry with 'MP000200' '2012' ZP000200' '0100'.

How do i add a new field in the screen "Creat without resource(lso_pv10)"

Similar Messages

Maybe you are looking for