How do I associate a Page with a particulary Parameter?

Hey guys,
i have this case. I have a managed Bean to fill a selectOnehoice component in a popup. The method that fills it needs to filter the selection. That means, if i call the method from a particular page, the selectbox should show only few of items, not all.
I was thinking, that I could set for pages concerned a parameter that is set when the user calls the page so, the managed Bean knows which is the current value and fills the select box correctly. The Property should be session scoped.
I think I should define the property in the pageDef File. Is it correct? How do I set the scope of the Property to session?
Thanks in advance!

so basically based on page you want to show select one choice.
what you can do is on page load bind one of the component in your backing bean say panel group layout.
and from getter of this pgl call your bean's method that will take parameter to filter.
so on each page load you can pass different value from getter to your managed bean's method that will filter and populate your selectOnehoice .

Similar Messages

How do I associate a device with my Apple ID?

I have an iPad and an iPhone. I sync them with my iMac desktop computer, and never with any other. I always use the same Apple ID. As far as I know, it's the only one I have.
Recently, I purchased an app using my iPad. The next time I synced the iPad with the computer, I got an alert saying "The purchased item 'App' on the iPad
'Etchemendy's iPad' could not be transferred to your iTunes library because you are not authorized for it on this computer." The alert goes on, in fine print, to say, "To authorize this computer for items purchased from the iTunes Store, choose Store > Authorize This Computer."
So I choose Store > Authorize This Computer, and I get a second alert saying, "This computer is already authorized." A nifty little continuous loop that neatly precludes me from using the app on any device except the one I used to purchase it.
But it gets better. In stumbling around trying to figure out what's going on here, I accessed "My Account" using iTunes on my desktop computer (logging in with the same Apple ID I used to purchse the troublesome app). When I click "Manage Devices," I arrive at a box that says, "These computers and devices are associated with your Apple ID for Automatic Downloads or to download previously purchased music, apps, and books..." It then gives me a "list" showing just one device -- my iPhone. The iPad is not shown here. Neither is the desktop computer iTunes just told me is already authorized. There's a button that says "Remove" next to the iPhone. And two bigger buttons. One says "Cancel" and the other says "Done." There is no "add a device" option.
So how to I associate a device with my Apple ID? And, as a matter of fact, why aren't all the devices I registered using my Apple ID already associated with it? I never had any of these problems till the big iOS system upgrade a few months ago. Since which, my interactions with Apple have nearly all been nightmarish. Apple obviously put the WAY wrong guy in charge of iOS development.
Oh. And BTW, when I look at the drop-down menu for choosing the "product" I'm having a problem with, only about half the devices registered with my Apple ID appear there. And I have no clue what kind of iPad I currently have. I have the warranty right in front of me, and all it says is "iPad WiFi 64GB Black." No doubt if I try to solve this using Apple phone support, I'll have to pay $20 to straighten out Apple's problem for them. Which is why I'm here.

My guess is you're using a long Apple ID and just omitted or mistyped a letter sometime, or something similar.
Anyway, the way to recover is this:
You cannot change ownership of the mistyped Apple ID to the correct one. After all, the mistyped one purchased it. However, you can authorize purchases from the mistyped Apple ID on your devices by doing Store > Authorize This Computer on iTunes on your computer, and enter the mistyped Apple ID and password. Then sync again and you'll be all set.
When you change computer (e.g., sell your current one and buy a replacement), you'll have to repeat this process.

How can I associate 2 appleids with one account or use a different Appleid for imessage as described in another post?

How can I associate 2 appleids with one account or use a different Appleid for imessage as described in another post?
I have rejoined the iPhone community, not with one iPhone but with two. My wife agreed to move from the unenlightened!
I have set up both under my apple account and want to keep it that way. But I do not want iMessages going to both phones. I would like separate message queues but share all apps and other purches from the store.
I have created a separate AppleID for her but under Settings>Message>Receive At (it currently says 2 addresses) > ... will not allow me to change the current eMail address and when I add hers (her appleid) it errors out. The only thing I can do in the Apple ID field is to manage my account and not change it to hers.
How can I have 2 iPhones (and my iPad) on the same account but have separate identies?
Thanks,
LpGrumpy

1. Yes. Restart with the Option key held down as needed.
2. No, it won't be a problem.
(83373)

How can I associat ".swf" files with flashlite 2.1

How can I associate ".swf" files with flashlite 2.1? When I
install flash lite 2.0,it can do ---- click .swf files system can
autoly use flashlite to play.But now I install flashlite 2.1,it
lost this ability return as "unknow files formate".
Now,how can I reassociate ".swf" with flashlite 2.1?
first: I must use flashlite 2.1.
second:I must click .swf file directly.
I know another way to open :open the player and then find the
.swf,and open it. But ,unfortunately,I can not use this way to
open.Now I will be looking for another way.

unfortunately, the 2.1 developer edition you have installed
has not overwritten the original version integrated into the
symbian OS by the manufacturer. This means that the only way to
open the 2.1 files is to open the 2.1 player from your apps menuu,
and click on the swf file. You will only get direct access if the
updated player is in a firmware update for you handset.
Matt
http://www.outside-media.co.uk/blog

How link my Facebook's page with my web site?

Hi!
How link my Facebook's page with my web site and have a preview of facebook's page on my website builted with iweb?
Regards
Thanks a lot.

I think it's the other way around. Sharing a webpage on Facebook.
Here's how : http://myipad.atspace.com/size/Share.html
But if you want your FB page embedded in an iWeb page then paste the <iframe> code in a HTML Snippet.
<iframe src="http://url.to.file.html" frameborder="0" width="500" height="500" scrolling="no" allowTransparency="true"></iframe>
Where SRC="" is the URL of your Facebook page. Change the numbers for witdh and height to make the FB page fit your webpage.

How can I add donate page with different levels of giving such as $250, $150, $50, Other

How can I add donate page with different levels of giving such as $250, $150, $50, Other. I am using Foxy Cart…is this possible?

From Muse end , you can add texts as donation value with paypal button which would take the users to paypal site for payment, with Foxy Cart you can try the suggestion mentioned here :
https://forum.foxycart.com/discussion/4417/donation-page-radio-button/p1
Thanks,
Sanjit

How do I associate my Ipad with a newly changed Apple ID?

How do I associate my Ipad with a newly changed Apple ID?

settings->store->appleID change it
though apps are tied to the appleID so all apps bought or downloaded with your old appleID will no longer work

How do you associate a view with a form?

How do you associate a view with a form and make it accessible in the form?

Try this
<Field name='myview'>
                    <Display class='Text'>
                        <Property name='title' value='My View'/>
                    </Display>
                    <Derivation>
                        <invoke name='getView'>
                            <ref>:display.session</ref>
                            <concat>
                                <s>User:</s>
                                <ref>accountId</ref>
                            </concat>
                            <map>
                                <s>authorized</s>
                                <s>true</s>
                            </map>
                        </invoke>
                    </Derivation>
                </Field>
                <Field name='myview.waveset.organization'>
                    <Display class='Text'>
                        <Property name='title' value='User Org'/>
                    </Display>
                </Field>

How can i associate a template with my message,

hi,
how can i associate a template with my message only.
where is the location of templage file?
thanks in advance.
zam_ora

hi,
i found out system Mailer item type and messages.
so i hople , i could take a copy of the template message and modify and associate with my notification , right?
but how i know , which template my notification is currently using.?
we are using Outlook as email client.
thanks.
zam_ora

How can I save a page with all the links for offline reading

how can I save a page with all the links for offline reading

Maybe '''Pocket''' is what you want?
[https://addons.mozilla.org/en-US/firefox/addon/read-it-later/?src=search Pocket (Mozilla Addons)]

How can I change of page with double click on my I-pod nano 7th generation?

How can I change of page with the double click feature on my I pod nano 7th generation?

I can't really understand what you are asking. Can you elaborate?

How do I create photo page with blow up images on click?

I need some help trying to create a web page of photo thumbnails with blow-up larger images:
1) I want to create a contact sheet type of web page of multiple photo thumbnails.
2) When you click the photo it opens into a small window or "blow-up" version of the thumbnail. (Clicking the thumbnail does NOT take you to a new page with the full size image).
3) The blow-up photo has a circle and X that will close the blow-up window.
I've already figured out how create pages of thumbnails that will take you to a new page with the full size image. I'm trying to create the effect where you never leave the main page, the thumbnails just blow-up into small windows that can be closed again.
Apple uses this effect a lot with photos and movie clips on their page. An example of what I am trying to do can be found on the iLife/iPhoto/MobileMeGallery info page at Apple.
If you look to the right just under the main large banner images, there is a grey box titled "iPhoto Showcase." If you click one of the thumbnails there, the picture blows out to a larger size of the image, but doesn't take you to another page. The blow-up image has a little circle and X at the top left to close the window. Main page is still visible behind the blow-up window.
I'm using a fairly new MacBook with OS 10.5, iPhoto and iWeb '08. I also have Aperture 2.0. I don't have a .Mac or MobileMe account yet. I'm a recent convert from the Darkside, so right now I use google's Picasa Web Albums and google's website creator for my site. If I can get this to work, I'll make the switch MobileMe once the early .Mac conversion kinks get worked out.
Thanks,
TDizzle...

Cyclosaurus--
That's the effect that I'm looking for. I've read through the instructions on Cabel's website (thanks for the great links!) But I'm afraid I'm still a bit of a novice with website creation and editing. I liked your iWeb examples, so I have a few follow-up questions about how to integrate this with iWeb.
1) Do you use iWeb and .Mac/MobileMe to publish your site? I already own a domain and have been using google's online page creator tools to create some very basic pages. For picture pages, I just put up links to my Picasa web albums. But the google user interface and options (no FTP upload) are even more limited than iWeb and .Mac. With 20GB of storage, plus the other features and ability for integration, MobileMe sounds enticing for the price.
2) At what point do you add the code to the pages in the edit and publish process? What are the exact steps you use to publish? (Create and edit in iWeb, add html code, publish to folder or publish straight to .Mac/MobileMe, etc.)
3) If you make changes to pages in iWeb, do you have to keep adding the code to the pages and repeat the steps from above question?
4) What app do you use to edit the html code? No html edit function in iWeb, so I tried opening the "page.html" files in TextEdit but the page just looked like a web page. No code. How do I get the text of the html code to open in TextEdit or another app?
5) Do the lines of code (2 lines in "head" and 1 line in "body") need to be added to every page that I want to use the effect?
6) How do you upload the two FancyZoom folders to a .Mac/MobileMe account site? And where exactly do they need to be placed?
Thanks,
TDizzle...

How do I create photo page with blow up images?

I need some help trying to create a web page of photo thumbnails with blow-up larger images:
1) I want to create a contact sheet type of web page of multiple photo thumbnails.
2) When you click the photo it opens into a small window or "blow-up" version of the thumbnail. (Clicking the thumbnail does NOT take you to a new page with the full size image).
3) The blow-up photo has a circle and X that will close the blow-up window.
I've already figured out how create pages of thumbnails that will take you to a new page with the full size image. I'm trying to create the effect where you never leave the main page, the thumbnails just blow-up into small windows that can be closed again.
Apple uses this effect a lot with photos and movie clips on their page. An example of what I am trying to do can be found on the iLife/iPhoto/MobileMe Gallery info page.
http://www.apple.com/ilife/iphoto/#mobilemegallery
If you look to the right just under the main large banner images, there is a grey box titled "iPhoto Showcase." If you click one of the thumbnails there, the picture blows out to a larger size of the image, but doesn't take you to another page. The blow-up image has a little circle and X at the top left to close the window. Main page is still visible behind the blow-up window.
I think this post mentions what I'm trying to do, but they seem to be having problems getting it to work. I need help creating this effect from scratch.
http://discussions.apple.com/thread.jspa?threadID=1609046
I'm using a fairly new MacBook with OS 10.5, iPhoto and iWeb '08. I also have Aperture 2.0. I don't have a .Mac or MobileMe account yet. I'm a recent convert from the Darkside, so right now I use google's Picasa Web Albums and google's website creator for my site. If I can get this to work, I'll make the switch MobileMe once the early .Mac conversion kinks get worked out.
Thanks,
TDizzle...

Cyclosaurus--
That's the effect that I'm looking for. I've read through the instructions on Cabel's website (thanks for the great links!) But I'm afraid I'm still a bit of a novice with website creation and editing. I liked your iWeb examples, so I have a few follow-up questions about how to integrate this with iWeb.
1) Do you use iWeb and .Mac/MobileMe to publish your site? I already own a domain and have been using google's online page creator tools to create some very basic pages. For picture pages, I just put up links to my Picasa web albums. But the google user interface and options (no FTP upload) are even more limited than iWeb and .Mac. With 20GB of storage, plus the other features and ability for integration, MobileMe sounds enticing for the price.
2) At what point do you add the code to the pages in the edit and publish process? What are the exact steps you use to publish? (Create and edit in iWeb, add html code, publish to folder or publish straight to .Mac/MobileMe, etc.)
3) If you make changes to pages in iWeb, do you have to keep adding the code to the pages and repeat the steps from above question?
4) What app do you use to edit the html code? No html edit function in iWeb, so I tried opening the "page.html" files in TextEdit but the page just looked like a web page. No code. How do I get the text of the html code to open in TextEdit or another app?
5) Do the lines of code (2 lines in "head" and 1 line in "body") need to be added to every page that I want to use the effect?
6) How do you upload the two FancyZoom folders to a .Mac/MobileMe account site? And where exactly do they need to be placed?
Thanks,
TDizzle...

How to print chinese web page with netscape browserver in Solaris 9 OS ?

Dear All,
I would like to print chinese web page within netscape browser in Solaris 9 Traditional Chinese OS, the print out result is garbage code on the paper not correctly chinese fonts.
I can print out correctly the chinese document create by StarSuite 7.0 on Solaris 9 OS environment and also the chinese web page is correctly display within Netscape browser but for printing is abnomal result.
Can someone point me to how to do print chinese web page with browser in Solaris 9 environment ?
Best Regards,
-- Kuo

hi
i have encountered this problem before and i remember downloading some fonts package and installing it. u could google search your question and it should provide the solution.thats how i stumbled upon the package.
cheers,
bunny

How to navigate to a page with POST?

Hi,
I have an APEX page with a combobox (or radio buttons) where the user selects a value and by pressing the submit button the application is supposed to navigate to a new URL. The combobox (or radio button group) items are associated to Discoverer URLS and I would like the application to call one or an other URL based on the value selected by the user. The reason for wanting to use POST for this is that I would not like to expose the link, since it has a password parameter in it.
Tamas

Peter,
I know, but I have no other idea, how I could resolve this. DBA do not want to see hundreds of Discoverer user created in the database. I have to authenticate users via APEX (calling Microsoft Active Directory using the built in LDAP package) and then I have to navigate them to the appropriate Discoverer enabled Oracle user. This seemed to be the less painful solution.
These are simple end users, and reports are not that sensitive to justify more effort than described above.
Tamas

How do I associate a Page with a particulary Parameter?

Similar Messages

Maybe you are looking for