How do I change currency sign $ to full wording of the currency ie USD on our Sales invoices in Great Plains?

Hi,
We are working in a multi-currency environment, many countries around the world are using the $ sign for their local currencies (like Australian
dollar). We invoice in USD but our invoice templates print the dollar sign ($), customers are confused which denomination they should pay with.<o:p></o:p>
How do we change on our Sales Invoice templates the $ sign to spelled out USD please.
Thanks
Zuzana

> How do we change on our Sales Invoice templates the $ sign to spelled
> out USD please.
That's rather not group policy related, but depends on the application
that prints your invoices. I'd suggest contacting the application vendor.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Similar Messages

My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?

My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?

Hey Lakedrive442,
It sounds like you have changed your Apple ID which you use with iTunes. If so there are several places you may need to update it as outlined in this article.
Apple ID: What to do after you change your Apple ID - Apple Support
Of course some might not apply, but many might.
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

How do I change my default "SAP Working Directory" to the one I wish ?

Hello Gurus,
How do I change my default "SAP Working Directory" to the one I wish ?
At the moment default SAP Working Directory to set to the following directory.
"C:\Documents and Settings\T51273\SapWorkDir"
So, when ever I try to download a Report/Table Contents/Spool Request, SAP prompts me to save in the above SAP Working Directory, which is "C:\Documents and Settings\T51273\SapWorkDir". Ofcourse I can change the folder in the dialogue box, but I don't want to change the folder each and every time I download a report from SAP.
I wish to change my default "SAP Working Directory" to "My Documents" Folder. So that from next time,
if ever I try to download a Report/Table Contents/Spool Request, SAP should prompt "My Documents" Folder. That way I don't have to change the folder at the time of saving.
Full Points are assigned for an answer that works...
Thank You,
Nag.

Hello,
A short question about transaction SO21:
Is this a local setting, per GUI?
Or does this affect all users?
I have a problem opening an attachment (Mandates).
SAP wants to save it to C:\Windows\System32\
I see that is stated at SO21.
If I change that to another (accessable) location, does that affect the opening of the attachment?
Thanks!

How I can change this query, so I can display the name and scores in one r

How I can change this query, so I can add the ID from the table SPRIDEN
as of now is giving me what I want:
1,543     A05     24     A01     24     BAC     24     BAE     24     A02     20     BAM     20in one line but I would like to add the id and name that are stored in the table SPRIDEN
SELECT sortest_pidm,
       max(decode(rn,1,sortest_tesc_code)) tesc_code1,
       max(decode(rn,1,score)) score1,
       max(decode(rn,2,sortest_tesc_code)) tesc_code2,
       max(decode(rn,2,score)) score2,
       max(decode(rn,3,sortest_tesc_code)) tesc_code3,
       max(decode(rn,3,score)) score3,
       max(decode(rn,4,sortest_tesc_code)) tesc_code4,
       max(decode(rn,4,score)) score4,
       max(decode(rn,5,sortest_tesc_code)) tesc_code5,
       max(decode(rn,5,score)) score5,
       max(decode(rn,6,sortest_tesc_code)) tesc_code6,
       max(decode(rn,6,score)) score6
FROM (select sortest_pidm,
               sortest_tesc_code,
               score,
              row_number() over (partition by sortest_pidm order by score desc) rn
          FROM (select sortest_pidm,
                       sortest_tesc_code,
                       max(sortest_test_score) score
                  from sortest,SPRIDEN
                  where
                  SPRIDEN_pidm =SORTEST_PIDM
                AND   sortest_tesc_code in ('A01','BAE','A02','BAM','A05','BAC')
                 and sortest_pidm is not null
                GROUP BY sortest_pidm, sortest_tesc_code))
                GROUP BY sortest_pidm;


Hi,
That depends on whether spriden_pidm is unique, and on what you want for results.
Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements, relevamnt columns only) for all tables, and the results you want from that data.
If you can illustrate your problem using commonly available tables (such as those in the scott or hr schemas) then you don't have to post any sample data; just post the results you want.
Either way, explain how you get those results from that data.
Always say which version of Oracle you're using.
It looks like you're doing something similiar to the following.
Using the emp and dept tables in the scott schema, produce one row of output per department showing the highest salary in each job, for a given set of jobs:
DEPTNO DNAME          LOC           JOB_1   SAL_1 JOB_2   SAL_2 JOB_3   SAL_3
    20 RESEARCH       DALLAS        ANALYST 3000 MANAGER 2975 CLERK    1100
    10 ACCOUNTING     NEW YORK      MANAGER 2450 CLERK    1300
    30 SALES          CHICAGO       MANAGER 2850 CLERK     950On each row, the jobs are listed in order by the highest salary.
This seems to be analagous to what you're doing. The roles played by sortest_pidm, sortest_tesc_code and sortest_test_score in your sortest table are played by deptno, job and sal in the emp table. The roles played by spriden_pidm, id and name in your spriden table are played by deptno, dname and loc in the dept table.
It sounds like you already have something like the query below, that produces the correct output, except that it does not include the dname and loc columns from the dept table.
SELECT    deptno
,       MAX (DECODE (rn, 1, job))     AS job_1
,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
,       MAX (DECODE (rn, 2, job))     AS job_2
,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
,       MAX (DECODE (rn, 3, job))     AS job_3
,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
FROM       (
           SELECT    deptno
           ,          job
           ,          max_sal
           ,          ROW_NUMBER () OVER ( PARTITION BY deptno
                                          ORDER BY         max_sal     DESC
                            )         AS rn
           FROM     (
                         SELECT    e.deptno
                   ,           e.job
                   ,           MAX (e.sal)     AS max_sal
                   FROM      scott.emp        e
                   ,           scott.dept   d
                   WHERE     e.deptno        = d.deptno
                   AND           e.job        IN ('ANALYST', 'CLERK', 'MANAGER')
                   GROUP BY e.deptno
                   ,           e.job
GROUP BY deptno
;Since dept.deptno is unique, there will only be one dname and one loc for each deptno, so we can change the query by replacing "deptno" with "deptno, dname, loc" throughout the query (except in the join condition, of course):
SELECT    deptno, dname, loc                    -- Changed
,       MAX (DECODE (rn, 1, job))     AS job_1
,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
,       MAX (DECODE (rn, 2, job))     AS job_2
,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
,       MAX (DECODE (rn, 3, job))     AS job_3
,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
FROM       (
           SELECT    deptno, dname, loc          -- Changed
           ,          job
           ,          max_sal
           ,          ROW_NUMBER () OVER ( PARTITION BY deptno      -- , dname, loc     -- Changed
                                          ORDER BY         max_sal      DESC
                            )         AS rn
           FROM     (
                         SELECT    e.deptno, d.dname, d.loc                    -- Changed
                   ,           e.job
                   ,           MAX (e.sal)     AS max_sal
                   FROM      scott.emp        e
                   ,           scott.dept   d
                   WHERE     e.deptno        = d.deptno
                   AND           e.job        IN ('ANALYST', 'CLERK', 'MANAGER')
                   GROUP BY e.deptno, d.dname, d.loc                    -- Changed
                   ,           e.job
GROUP BY deptno, dname, loc                    -- Changed
;Actually, you can keep using just deptno in the analytic PARTITION BY clause. It might be a little more efficient to just use deptno, like I did above, but it won't change the results if you use all 3, if there is only 1 danme and 1 loc per deptno.
By the way, you don't need so many sub-queries. You're using the inner sub-query to compute the MAX, and the outer sub-query to compute rn. Analytic functions are computed after aggregate fucntions, so you can do both in the same sub-query like this:
SELECT    deptno, dname, loc
,       MAX (DECODE (rn, 1, job))     AS job_1
,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
,       MAX (DECODE (rn, 2, job))     AS job_2
,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
,       MAX (DECODE (rn, 3, job))     AS job_3
,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
FROM       (
               SELECT    e.deptno, d.dname, d.loc
          ,       e.job
          ,       MAX (e.sal)     AS max_sal
          ,       ROW_NUMBER () OVER ( PARTITION BY e.deptno
                                       ORDER BY       MAX (sal)     DESC
                                      )       AS rn
          FROM      scott.emp    e
          ,       scott.dept   d
          WHERE     e.deptno        = d.deptno
          AND       e.job                IN ('ANALYST', 'CLERK', 'MANAGER')
              GROUP BY e.deptno, d.dname, d.loc
          ,       e.job
GROUP BY deptno, dname, loc
;This will work in Oracle 8.1 and up. In Oracle 11, however, it's better to use the SELECT ... PIVOT feature.

The calendar week view on my iphone 4s starts on a Sunday. I am synching with outlook on my computer which starts the week view on a Monday which I prefer. How do I change my iphone calendar view to start the week on a Monday?

The calendar week view on my iphone 4s starts on a Sunday. I am synching with outlook on my computer (pc) which starts the week view on a Monday which I prefer. How do I change my iphone calendar view to start the week on a Monday? I am in Australia.
I have just noticed the other discussion points - mine is set to Australia.
Dear Apple - as the day that the week starts on can depend on country and religion - how about making it an option that the user can change????

I believe the week view on the iPhone is handled by the Region settings in the phone. I am not aware of any other manner to change it, as you can with Outlook.

How can I CHANGE A pdf file to word or excell

how do I change a pdf file to word or excell

Hi Alfonzo,
Here is a great 'getting started' guide that may help!
Let me know!!
Kindest regards, Stacy

Question about iCloud. How do I change my e-mail address, I have the wrong one and want to change it.

question about iCloud. How do I change my e-mail address, I got the wrong address.

There are a variety of options available to you, including creating an email "alias" or changing the email address associated with your iCloud ID.
For all practical purposes your iCloud email address and Apple ID are interchangeable. To change your Apple ID read Apple ID: Changing your Apple ID.
If you simply created an Apple ID in error, you might consider abandoning it altogether and creating a new one. On the other hand, if you already used that Apple ID to purchase iTunes or other digital content, don't create a new Apple ID, because any purchases you already made are inexorably linked to the Apple ID used to make them.

How do I change Text Colour in a Spreadsheet? The Help menu doesn't help.

Simple question whcih i cannot find the simple answer to: How do I change Text Colour in a Spreadsheet? The Help menu doesn't help.

Hi Lecia,
You have several choices.
Use the first set of controls in the Format Bar. One of these is a Color well (red in the image). Select the cell(s) in which you want the text coloured, then click the well to open its Color palette, and choose your colour.
Use the Text Inspector. Open the inspector, click the Text button (T), and use the tools there (similar to the set in the Format Bar).
Press command-T to open the Fonts Window. This offers a few more options than are available in the Inspector or the Format bar.
Regarding "Help": I'd recommend using the Numbers '09 User Guide, which you can download via the Help menu. Easier to search, and easier reading than the individual Help articles. search 'text color' to quickly get to instructions on applying colour to text.
Regards,
Barry

How do I change a pdf to a word doc that I can add to and change

how do I change a pdf to a word doc that I can add to and alter

You can use Adobe ExportPDF to do this.

How do i change a pdf document into word so i can make changes to it?

how do i change a pdf document into word so i can make changes to it? Thanks

Hi stevemortgageman,
You can use ExportPDF to convert a PDF file to Word format, and several others. For more information, please see http://cloud.acrobat.com.
Best,
Sara

How do I change a PDF to a word document?

How do i change aa PDF to a word document?

In Mac preferred method (because it uses Adobe's PDF engine):
Save file as word Document (for Backup)
Go to Print Menu
Click and hold on PDF button until context menu appears
Choose Adobe PDF
Wait for menu to change - choose quality (this eqivelent to job options in Distiller) and turn off open with Reader (or Acrobat)
Then click okay to go to nex window item
Either use Title assigned or change (I usually remove references to Microsoft Word-, and .docx so it just shows as for example Joes.pdf),
Browse (pick out) to desired save Location.
Click Save.
Go to location saved and open.
Notes: Expect to multiple PDF if the Word document page have switches in Page orientations.
URL links won't cme over with this method.
To have Urls to be active (except those created with the Format menu > URL)
Do the following:
Locate the Word Document
Locate the acrobat Icon on the Dock (similar to Start up menu on PC)
Drag the word document to the icon of Acrobat on Dock and Drop
Wait ........... You might have enough time to boil you a pot of coffee
When PDF pops up on screen save at once!
You will now have a document that will have live MailTo's and URL's except for those created with the URL wizard ( select desired word> go to Formtat menu > URL >when opens type desired URL or Mailto)
This is a 15 year old bug Adobe refuses to fix. Don't bleive the blather the put out bout the proper hook in Mac Version That's been proven as false years ago.

My iPhone has the correct Apple ID for everything BUT iCloud. How do I change that. Going through Settings shows the incorrect ID but it does not allow change.

My iPhone has the correct Apple ID for everything BUT iCloud. How do I change that. Going through Settings shows the incorrect ID but it does not allow change.

Settings > iCloud > delete account
You want to keep all content on your iPhone
Resign back in

Now that i have installed the software how do i change a pdf into a word doc

now that i have installed the software how can i change a pdf into a word doc

Hi patm23422687,
I hope by saying 'installed the software', you mean that Acrobat XI is now installed on your computer.
Now, open the PDF in Adobe Acrobat and choose "File> Save as Other> Microsoft Word"
This is all you need to do
Please try and let me know if you need further assistance.
Regards,
Anubha

How do I change custom field description and name on the project fields PDP

I'm creating a custom PDP for a workflow process and I need to add the folloiwng fields "Project Name" and "Description"
When I try to create Project Name custom field under server settings I get the following message "The custom field name cannot match the name of any intrinsic fields."
So I went to the PDP web part Project fields and I found a field named " Project Name". I added it to the Proejct Fields web part, but it displays as "Name".
How can I change this field that's out of the box? I don't see "Project Name" and "Description" under server settings > Enterprise Custom Fields and Lookup Tables to modify them.
Thank you

Hi there,
Project Name & description fields are internal fields in project server which you cannot view in Enterprise custom fields in PWA. You will not be able to create with the similar name. There is no way to change these fields as far as I know.
I would suggest to have the new fields name something like Project_Name/ ProjName or Project_Description/ProjDescription .
Hope that helps.Thanks, Amit Khare |EPM Consultant| Blog: http://amitkhare82.blogspot.com http://www.linkedin.com/in/amitkhare82

How do i change my iPhone to another iPhone using the same sim but keep all my photos ands everything?

How do i change my iphone to another iphone using the same sim but keep all my photos and everything?

Old Phone to New Phone
http://support.apple.com/kb/HT2109

How do I change currency sign $ to full wording of the currency ie USD on our Sales invoices in Great Plains?

Similar Messages

Maybe you are looking for