IPad not recognized  by my Dell computer

My iPad is not being recognized by my laptop.  I have used the USB port to try to transfer pictures in my laptop to my iPad but it does not recognized or even show that the iPad is connected to the computer.  Additionally, the indicator for charging states "not charging".  The iPad had already been replace once for a malfunction but I suspect they (sales/technical individual) failed to recognized that the iPad does not charge with other computers, so my original iPad had been replaced.  How do I get this one to "register" with my computer?
Thanks for any advise.
EO

The 'not charging' is normal. Very few computers have a powerful enough USB to charge an iPad (technically it does charge, just very, very slowly, triggering the 'not charging' warning)
Like the others have suggested, try different USB ports, if you're using a hub or extender stop and plug it directly into your computer. Uninstall and reinstall iTunes. Then go through those troubleshooting and restore protocols.
SInce computer configurations vary from person to person there's no single quick fix. You just have to try and work your way thorough stuff to get the driver back.

Similar Messages

  • IPod touch and iPad not recognized by iTunes or computer

    I have both an iPod touch (4th gen maybe?) and an iPad. A few days ago I synched both earlier in the day and no problems. That night I downloaded the latest iTunes update and when I tried to synch both devices nothing happened. The computer will charge the devices but they don't appear on iTunes or the My Computer.
    I looked thru the discussion board and I went thru the steps of restarting my AMDS, that didn't work. Then I uninstalled and reinstalled iTunes and Quick Time and nothing happens. iTunes works fine. My library is intact but it won't recognize my devices. I've had my iPod touch for a little over a year and my iPad since this past Christmas with no problems until now.
    Thank you.

    Thanks for the response but this didn't work for me. I went thru the whole comprehensive set of steps and still iTunes doesn't recognize either device. I'm not sure what else to do. My husband thinks I should restore the computer to an earlier date prior to the last iTunes software update. Not sure what else to do. For now, both the iPod and the iPad work fine. I just can't synch them.

  • Ipod not recognized by any MAC computer

    I have a 20gb IPOD 2nd generation which has worked fine until recent itunes and tiger software upgrade. Now Finder nor utilities (ipod updater) nor itunes will recognize the ipod when connected with firewire-- even in disc mode. Ipod is not recognized by any MAC computer (several tried in Apple store). I ran diagnostics and everything checks out on the ipod. Please help.

    When I got a different charger later that night, my Ipod was charging but a message popped up saying "USB device not recognized".
    This article may shed some light...
    Powering Apple and third party peripherals through USB

  • When I try to use my TWC App on my iPad2, the sound is about 15 seconds off from the picture.  This only happening on my iPad, not my phone or my computer.  TWC said it's an Apple issue.  Is there a fix?

    When I try to use my TWC App on my iPad2, the sound is about 15 seconds off from the picture.  This only happening on my iPad, not my phone or my computer.  TWC said it's an Apple issue.  Is there a fix?

    Hello Corkymom4,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting steps in the article below to resolve issues with apps downloaded from the App Store.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    Take care,
    Alex H.

  • I am trying to connect my sandisk titanium flash drive to my macbook pro. the light is on but it is not recognizing it on the computer. any ideas

    I am trying to connect my sandisk titanium flash drive to my macbook pro. the light is on but it is not recognizing it on the computer. any ideas

    Do other USB devices work on your MBP?
    Does this USB stick work on other MBPs?
    There is a possibility that the stick requires more power than the MBP delivers.  Try it on a powered hub.
    Ciao.

  • Ipad not recognized on imac

    When I had to reset my IPAD( couldnt remember my password), my iMAC does not recognize my Ipad and unable to sync any music, apps etc.
    I have tried everything, what is the next step?

    Correct on Ipad assumption; not recognized on my Imac or Mac Pro.
    Also, my Mac Pro has Itunes11 installed correctly, still didnt matter.
    I have to figure out how to uninstall Itunes on my Imac, somehow its corrupted.
    When I move Itunes to Trash, I get the message that ITunes cannot be modified or deleted bc its required by Mac OS......
    So, its two problems.
    IPAD not recognized and Itunes not loaded to R11 on Imac and unable to uninstall/re-install.
    HELP....

  • Why can't I sync my ipad air to my older Dell computer????

    Why can't I sync my ipad air w/ my older Dell Computer?

    Start iTunes on the computer.
    Connect your iPad to the computer.
    SELECT your iPad in iTunes. Look for the small device icon in the top bar of iTunes. Click on that.
    A sidebar should be on the left.
    Select the Music, Photos, videos, App etc. that you want to have on your iPad.,
    Then click on Sync or Apply whichever shows.

  • TS1474 ipad not recognized by mac computer

    mac does not even recognize ipad.  I have tried updating software on mac.  rebooted both ipad and mac.  have opened itunes then plugged in ipad.  does not even show to be charging ipad.  I have another ipad (first one out) it worked fine on computer.  iphones work fine.  only this ipad?

    Device not recognized in iTune
    http://support.apple.com/kb/TS1591

  • HT1430 new cord for ipad not recognized by computer

    My daughter just got and refurbed  ipad 3, she plugged it in to sync with itunes account to transfer apps, says cord not recognized.  Obviously it was recognized for a bit because she went on itunes and accidently jit restore.  NOw ipad will not even turn on or be recognized

    Your post is a little confusing to me, because the sequence of events seems to be out of order.
    You are saying that she accidentally restored the iPad so that proves the cord was working. Then you say that she could not sync because she gets a message saying that the cord isn't recognized? I'm not sure what either of these things has to do with the iPad not turning on now if it has anything to do with it at all.
    Do you have another cable that you can try? Any older iPod Touch cable will work if you have one. You can even try straighten the cable out, maybe there is a bad spot in it and it will work temporarily if you straighten it out a bit.
    Try rebooting the iPad and see if it will start up.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • IPad not recognized by iTunes, recognized by Windows as a camera

    I first started using my iPad yesterday. Yesterday I was up until 2:30 in the morning trying to find a solution, to no avail. I had apple support call me today, but I missed their calls and now I have to wait again until they call me. But in the mean time, here's what's going on. My iPad is recognized by windows (XP Pro SP2) as a camera when I plug it in, but it will not show up in iTunes. I ran the diagnostic connectivity test in iTunes, and all lights are green except the one indicating that an iPod/phone/pad is plugged in. I've restarted the iPad, I've restarted my laptop, both numerous times, I have no firewall/antivirus running (as per older posts I've seen here) and still nothing. Today I plugged it into my mother's laptop, and iTunes recognized it without a problem, so I'm assuming it's something to do with my laptop. Anyone have any suggestions?

    Folks,
    I had this problem with my PC (windows 7, 64-bit) and my iPad. After messing with it for a long time, I finally found the answer (bad USB driver). The following two step process should help resolve these kinds of problems more quickly.
    The first step is to verify that the iPad (or iPhone) is really connected to your computer. This can be (really) checked using a program called USBDeview. You can get this (very small) program from http://download.cnet.com/USBDeview/3000-2094_4-10614190.html or http://www.nirsoft.net/utils/usb_devices_view.html. Don't worry, it's not Spyware or Malware.
    Just run the program and sort on the 'Connected' column. If your iPad or iPhone doesn't show up as Yes (under 'Connected') then your iDevice is not properly connected to your computer. Could be a cable problem. Could be an iDevice problem. Could be a USB hub problem. Note that your iDevice might be listed as what it is (iPad or iPhone) or it might be listed as 'Apple Mobile Device USB Driver' in the 'Description' column.
    Apple has a number of ideas to resolve this sort of basic connectivity issue, including switching USB ports, resetting your iDevice, rebooting your iDevice, rebooting your computer, etc. You will need to try them until your iDevice shows up in USBDeview as 'Yes' under Connected.
    If you iDevice shows up as 'Yes' under connected, it should also be visible in the Device Manager (found in the Windows 7 Control Panel under Hardware and Sound). You might find it under Portable Devices or it might be under Universal Serial Bus controllers.
    The iDevice may or may not show up in the Windows Explorer. On some machines it does, on others it does not. Why is not clear.
    If the Idevice is properly known to Windows and iTunes can't see it, then any number of other things could be wrong. Apple has a list. See the very useful page over at http://support.apple.com/kb/TS1538. Testing shows that the Apple Mobile Device service must be running. Check this using Task Manager (started by right clicking the taskbar). Note that the iPod service and the iphlpsvc service must also be running. These services have different names under the Processes table versus the Services tab of Task Manager.
    AppleMobileDeviceService.exe - Apple Mobile Device
    iPodService.exe                      - iPod Service
    ItunesHelper.exe                     - iphlpsvc
    Step 4 of http://support.apple.com/kb/TS1538 checks if the Apple Mobile Device USB is installed. This is essential and a common source of problems. In at least some cases, Windows will install the 'MTP USB' driver. Indeed, Windows will reinstall this driver if you uninstall it. The MTP USB driver is essentially a Windows bug (possibly caused by Microsoft). You must replace the MTP USB driver with the Apple Mobile Device USB Driver. Step 4 explains how to do this. Note that you must use the 'Have Disk' approach. Otherwise, Windows will just reinstall the invalid MTP driver.
    The Apple doc indicates that you can find the correct driver at C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. Perhaps this is correct on some systems. You may find the correct driver in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
    iTunes could make this a lot easier by checking if the iDevice is known to Windows (what USBDevier does) and if the Apple Mobile Device USB driver is properly installed for the iDevice. Sadly it doesn't perform either check. Note that iTunes does if some of the related services (see above) are actually running.

  • IPad not recognized by iTunes

    I have the following problem:
    My new iPad is not connecting to iTunes. When I insert the USB cable I hear the USB-connect sound of windows, but in iTunes nothing happens.
    However my previous iPad and iPhone are connecting without any problems. I followed all the steps in the guide on the Apple Support page, including completely deleting and reinstalling iTunes. Nothing helped.
    My stuff:
    OS: Windows 7
    Itunes: latest version
    iPad with retina display, iOS 6.1 - the new one that will not connect
    iPad 2, iOS 6.1 - connecting without problems
    IPhone 4, iOS 6.1 - connecting without problems
    Can anyone help me and solve this problem of my new iPad not connecting to iTunes?

    I found a solution. It seems that Windows had a setting selected that drivers are not automatically installed if not available on the computer. So I changed this setting and my iPad was immediately recognized.
    For people with the same problem: I went to: Control Panel > Devices and printers. Under Unknown I saw my iPad, so I right clicked and selected: Solve problems. Then it said something about missing drivers so I chose to install them. In addition the problem solve wizard pointed me to the setting in windows that drivers are not automatically installed.

  • IPad not recognized by itunes in Win7

    Hallo,
    after setting up my computer new and changing to windows 7 (starting with a new SSD) my iphone is not recognized by itunes. In windows i get in
    start -> system configuration -> hardware and sound -> printers and devices
    8 devices in section 'printers and fax'
    5 devices in 'devices'
    and in the bottom section 'not specified' the ipad device
    The first question is if this is the right place to show for the ipad in win7. I see nothing in 'computer' in the windows explorer
    If i plug and unplug the ipad from (several) USB ports (which are all 2.0) i get the typical windows sound for that
    The problem is that the device does not show up in itunes. If i choose [Questionmark] / Start diagnosis in the itunes menu bar, all is green except for the one red light saying 'no ipad found'
    I already worked through the official help
    http://www.apple.com/support/ipad/assistant/itunes/#section_0
    with no result (itunes version 10.4.1.10, USB 2.0, itunes re-installed)
    Can anybody help, any ideas?
    Thanks in advance

    I just worked again throught the link provided by Carolyn Samit
    I stumbled in the section
    3. Verify that the Apple Mobile Device USB Driver is installed
    There i read after gettin into the device manager
    'Locate the Apple Mobile Device USB Driver in this list.'
    I got a whole bunch of USB things in the device manager but none of them has the word 'apple' in it. Does that really mean i have to search for some apple word in the device manager?
    Maybe someone out there with a working win7/ipad/itunes system can just confirm that
    a) he has some apple thing in the device manager
    b) his ipad does not show up in the windows explorer
    c) his ipad shows up in the section 'unspecified' in the start -> system configuration -> hardware and sound -> printers and devices
    Thank you

  • TS1538 iPhone and iPad not recognized by iTunes 11.1

    After an update to 11.1 iTunes stopped recognizing my iPhone and iPad. I tried everything I could find on Apple site and generated by a Google search. I tried reinstalling iTunes, restarting Mobile Device Service, uninstalling all the components - restarting and reinstalling itunes. After I uninstalled itunes and all of its components it would not install again. I finally restored my Windows to a oint when I had a previous version of itunes, library wouldnt load because it was already updated to a newer version itunes library, so I deleted it and itunes started - but, of cours, it would not read my iphone or ipad because I already had ios 7 installed. So, I tried updating to new version - couldn't update it. I don't even get any error numbers I could go off - the instlallation just rolls back and tells me that it could not be completed because of an error! What error - I have no idea. Oh, but at least this old version of itunes recognizes that I have an iphone or ipad connected! And I can open photos folder, just can't sync anything to my devices. So, I uninstall alllll of the components of itunes again - every single one of them, delete all contents of temp folder, make sure I have no trace of itunes or apple-anything on my computer, restart it and try to install itunes again - nothing, same thng - starts installing, then at one point all of the progress rolls back and says there was an error installing it. So, I make sure I have no apple and itunes programs left on my laptop, clear temp folder again, restart and restore my laptop. Install itunes, yahoo - it installs! My entire (HUGE) library of music and audiobooks - gone, BUT at least it installed itunes 11.1. SO I connect my iphone and... NOTHING! Went to device manager again - tried updating driver from a foler - error, tried scanning for changed - nothin happened, tried restarting Mobile Device Service - error, cannot restart it. Checked in control panel & I couldn't even see it in the uninstall programs, but I see it in administrative services... So I am lost, I literally tried everything I could think of myself, everything I read on apple support site and everything I found on Google.... And I know for a fact that it's the new version of the itunes, coz previous one works and I would be fine with it and keep it, if it would only read my iphone! Oh, by the way - I have no third party devices installed besides the iphone and ipad. And my WIndows updates are allll the way up to date! This issue started when I updated my itunes after the release of the ios 7.
    What do I do now? Get rid of the stupid iphone and ipad??? What's the point of having them if I can't even sync my music to them!!! So upset with Apple! If I could only use their product like any android or windows phone - go to my computer, open the device and put the folders in it! But they will never give this much power to us!
    Does anyone has any new ideas on what I could do to resolve this issue?
    Thank you!
    PS: my husband has same problem with his iphone and ipad... on his desktop computer... So obviously - i'm not alone!

    So, an update... I was able to fix my iTunes & connect my iPhone & iPad to it. All it took is a hard drive reformatting & re installation of Wondows 8. Good one, Apple! Thanks for the new iTunes release!

  • IPad not recognized

    I have an iMac dual core and bought a new iMac Core i3. When I set up the new iMac, I restored my files from a Time Machine backup. Mistake, I now had two machines with the same iTunes files and my iPad and iPhone were no longer recognized by either. I deleted the iTunes files on one computer. I reloaded iTunes on both. I reset the iPhone and the iPad. I was able to synch both with the new computer. I restarted both computers and I could still synch with the new computer. I shutdown and 24 hours later the new computer (and the old computer) would not recognize the iPad or the iPhone. I reinstalled iTunes and everything worked again. I shutdown and restarted, everything worked. Now, 24 hours later, the new computer will not recognized the iPad or the iPhone once again. Any ideas or experience?

    De-authorizing failed on both computers. Being authorized or not doesn't seem to explain why neither computer would recognize the presence of the iPad or the iPhone after 24 hours but would do so immediately after iTunes was reinstalled. I think there is a difference between not syncing and not recognizing that the devise is attached.
    That said, what seems to have worked:
    I deleted everything associated with iTunes on the older computer and reinstalled it with no data files. I reinstalled iTunes on the new computer which allowed me to attach the iPad and load the OS update. Following that I loaded the OS .4 update on the new computer. Following that, I reinstalled iTunes on the new computer and shared its files with the old computer. Both are still authorized as 2 of my five allowed computers. So far, that seems to be working.

  • IPad not recognized in Windows 7 Ultimate

    Good Morning,
    Last week, I received an iPad 32GB WiFi as a gift. At this time I was running Vista Ultimate 64 on my home system. When I unboxed the iPad I read the instructions and installed iTunes 64-bit 9.2.1 on my Vista system. I connected the iPad and it was detected and iTunes launched. I registered the device and then it downloaded the OS update and successfully updated it to 3.2.2
    I also received Windows 7 Ultimate and wiped my system and installed it. All the drivers are loaded from my hardware vendors (chipset, video, sound, etc). I know USB functions as I am able to plug in digital cameras, my passport drives, etc. and they are all detected and work fine.
    I installed iTunes 64-bit 9.2.1 again. I logged into iTunes with my user account and that works fine. However, now when I connect my iPad to my system, I get Windows pop up messages telling me the device is not recognized and the driver could not be installed.
    I opened device manager and after several unplug/replugs of the iPad, half the time I see "Unknown Device" and once I saw "Apple Mobile Device" with a yellow !.
    I found Apple's KB article: http://support.apple.com/kb/ts1538
    I followed the instructions by uninstalling the "Unknown Device" and scanning for new hardware. It detects Unknown Device again. I then right clicked on Unknown Device and chose to update driver and navigated to C:\Program Files\Common Files\Apple\Drivers and trying to update the driver to use the Apple Mobile Device Driver but I get warnings and errors during this process. The warning tells me it isn't a compatible driver with the device and asks if I want to install it anyway. I chose yes. It installs but then it gives me an error telling me the device cannot start.
    I don't know what is wrong. Anybody have any ideas?
    Thanks for the help.

    WOW with the help from Apple's Web Site I figured it out.
    This URL was very helpful
    http://support.apple.com/kb/TS3125
    I disabled 'Online Armour' then
    and this one even more so...
    http://support.apple.com/kb/HT1923
    I found out that there is a whole raft of Apple software packages that are interrelated, they needed to be uninstalled in a certain order with the broswer closed.
    In some rare instances, it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    1. iTunes
    2. QuickTime
    3. Apple Software Update
    4. Apple Mobile Device Support
    5. Bonjour
    6. Apple Application Support (iTunes 9 or later)
    After they were all uninstalled I restarted windows to make sure the registery was updated properly.
    Then all you have to do is reinstall iTunes which will add all of the above back all over again in the proper order.
    Then I had to go into Win 7 SERVICES and STOP the new Apple Mobile Service and then restart it again so it would take effect.
    Started iTunes, plugged in the iPad and every thing began working as expected.
    Thanks Apple.

Maybe you are looking for

  • Capturing AVCHD straight to Final cut express

    I have a Canon vixia HF10 camera that films in AVCHD. Mostly i have been importing to IMovie but I am trying to learn how to capture it straight into Final Cut Express. Any Help with how i can import the AVCHD files?

  • How to add and delete content on device from iTunes

    I cannot find the way to add and delete content on my devices from the new iTunes. I don't understand why they changed the way it worked without any tutorials or hints at how to use the new iTunes app. I can see my device, I can see that music is on

  • Spefications for Pdt Name,Serial Number and Pdt Number not working in HPSA

    HP technical support came and replaced a new motherboard on Feb 5, 2015. Also,  I have not being accessing HPSA for quite some time now and I am not aware how long has this take place.  When I access HPSA, under System Information, only Product Name,

  • Migrating CMP EJB mapped to SQL Server table with identity column from WL

    Hi,     I want to migrate an application from Weblogic to SAP Netweaver 2004s (7.0). We had successfully migrated this application to an earlier version of Netweaver. I have a number of CMP EJBs which are mapped to SQL Server tables with the PK as id

  • Lightbox Widget - what am I doing wrong?

    Hello. I was wondering if someone could look at the code on my test page and tell me why the Lightbox widget works in Preview and not in the browser. I'm sure it's something very easy to fix but I've tried everything and have limited knowledge. Here