How do I configure JNDI using Tomcat5.5 and Microsoft SQLServer
Dear All,
I wish to know about the advantages of using JNDI concepts over the normal Database connectivity using DriverManager class.
Can anyone explain me about the advantages of using JNDI over other technology and how it would be helpful in the Web Development environment in Apache Tomcat 5.5
check this
http://java.sun.com/docs/books/tutorial/jndi/index.html
Similar Messages
-
How can I configure ang use JNDI datasource on Tomcat 4.0.x ?
How can I configure ang use JNDI datasource on Tomcat 4.0.x ?
Please help me , Thanks !Hello ,
You need to go through the JNDI tutorial which you can access at the sun's site. It will explain all the things you need.
By the way all you want to use JNDI datasource is JNDI class library and some naming or directory service provider, which also you can download from sun.
Good Luck. -
How do I configure DW to open and load a file?
I have DreamWeaver CS5 running on a Mac. Whenever I double-click to open a DreamWeaver compatible file (such as an HTML file), if DW is not already open, DW launches but does not load the file. Once DW is launced, I can double-click the file and it will load. How do I configure DW to open and load a file together?
DW: v11 b 4993
OS X: 10.7.4 (11E53)HTML files are normally configured to open in a browser. The default on a Mac is to open the file in Safari.
You can right-click the filename in the Mac Finder, and select Open With > Dreamweaver CS5 from the context menu.
Alternatively, select an HTML file in Mac Finder, and press Cmd+I to open the Info panel. In the Open With section, select Dreamweaver CS5 as the default program, and click the Change All button. -
How to connect one page using button and by link in BSP
how to connect one page using button and by link in BSP
hi,
use on 'onclick' functionality.
1. In layout, onclick = 'NEXT_PAGE' of the button
2. Capture the event in onInputprocessing,
DATA: event_id TYPE REF TO cl_htmlb_event.
case event_id.
when 'NEXT_PAGE'.
navigation->goto_page( 'URPAGE URL' ). -
Explain How delivery date is calculated using backward and forward schedul
How can anyone please explain how delivery date is calculated using forward and backward scheduling
I want to have it broken down into the following steps
for eg for delivery date calculation following dates are used
Material Availabilty Date
Material Staging Date
Pick/pack time
Transportation PLanning date
Loading date
Goods issue date
Transit Date
Delivery Date
Can some one please give me an example and explain wht these dates are
for eg customer needs delivery date on 11/20/2008
how would the system cacluate whether it can meet the delivery date using backward scheduling
and if it doesnt meet how does the system do the forward scheduling
also i am not clear with the following dates
material avaialibilty date
material staging date
transportation date
can some one please explain me all this in detail
ThanksHi,
Basically this is the CRSD(Customer requested ship date logic)logic in which system calculates the ship date depends upon the material availability. If material is available system calculates ship date on the basis of master data maintained in customisation.Master data is maintained in the following link.
If material is not available then system takes into consideration vendor delivery date & then calculate customer ship date.
Please go through the link in SPRO
LE-Shipping -Basic shipping functions-Scheduling -Delivery scheduling & Transportation scheduling-Maintain duration.
In customisation following data is maintained
Material Availabilty Date
Material Staging Date
Pick/pack time
Transportation PLanning date
Loading date
Goods issue date
Transit Date
Delivery Date
Hope you got the idea of CRSD calculation
Regards,
Prashant. -
How to refresh table display using slis and 'reuse_alv_grid_display method.
hello,
how to refresh table display using slis and 'reuse_alv_grid_display method'.
when i'm refreshing table display it performs once again reuse_alv_grid_display.and when i back the previous value appear.how to solve it?
neonare you chaning any value in the gird if so use this..
Pass the user_command form name to the Import parameter
I_CALL_BACK_USERCOMMAND .
and have the Dynamic form implementation..
FORM user_command USING ucomm TYPE sy-ucomm
selfield TYPE slis_selfield.
"The below is important for Editable Grid.
DATA: gd_repid LIKE sy-repid, "Exists
ref_grid TYPE REF TO cl_gui_alv_grid.
IF ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
CALL METHOD ref_grid->check_changed_data .
ENDIF.
CASE ucomm.
WHEN 'REFRSH'.
ENDCASE.
selfield-refresh = 'X'.
ENDFORM. "user_command -
my question is regarding SharePoint 2013 Farm topology. if i want go with Streamlined topology and having (2 distribute cache and Rm servers+ 2 front-end servers+ 2 batch-processing servers+ cluster sql server) then how distributed servers will
be connecting to front end servers? Can i use windows 2012 NLB feature? if i use NLB and then do i need to install NLB to all distributed servers and front-end servers and split-out services? What will be the configuration regarding my scenario.
Thanks in Advanced!For the Distributed Cache servers, you simply make them farm members (like any other SharePoint servers) and turn on the Distributed Cache service (while making sure it is disabled on all other farm members). Then, validate no other services (except for
the Foundation Web service due to ease of solution management) is enabled on the DC servers and no end user requests or crawl requests are being routed to the DC servers. You do not need/use NLB for DC.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How do you configure the default Webserver and AppEX in XE(windows)?
I'm new to XE but an old hat with Oracle Standard and Enterprise editions, Apache and AppEx (htmldb).
What is the default webserver that comes with XE(windows) and how do you configure it? Where are the httpd config files?
Also I read in the doco that you need to use Apache if you want to use https. Is there any doco on how to configure XE with Apache?
Also with respect to AppEx
where are the physcial files e.g. I can't find the following file or directories. Where is virtual directory /i/ mapped to? Where is this configured?
http://127.0.0.1:8080/i/htmldb/builder/db_users_ctrl.gif
regards
Paul PlattPaul,
for the Apex files see: http://daust.blogspot.com/2006/03/where-are-images-of-application.html
For configuring the Apache as a proxy to XE:
HTTPS with Oracle XE ?
Re: Existing http server
~Dietmar. -
How to automlog into webside using username and password using java program
I am trying to log in to a website using password and username. What libraries i can use. I searched online and came to know that i can use Apache's commons HttpClient library to do that. I am new to this please let me know what can i use.
For starting purpose i wrote this code:
public static void main(String[] args) throws URIException {
try {
HttpClient client = new HttpClient();
GetMethod method = new GetMethod("http://www.google.com");
int returnCode = client.executeMethod(method);
System.err.println(method.getResponseBodyAsString());
method.releaseConnection();
} catch (HttpException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
but this is giving me an error. please see below,
java.net.UnknownHostException: www.google.com
at java.net.AbstractPlainSocketImpl.connect(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:80)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:122)
at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:387)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
at com.verizon.zoeott.ingest.PropertyFileReader.main(PropertyFileReader.java:48)
Another thing is that we use proxy to get internet connection. In internet explorer-->internet options-->LAN Settings-->using automatic configuration script to connect to the internet.
I don't know how to configure this into java program. please help.
Thanks,
amol
Edited by: 877846 on Jan 20, 2012 9:16 AM
Edited by: 877846 on Jan 20, 2012 9:21 AMAlso please let me know about how to connect internet through proxy server.As I said above, if you are using the Apache HTTP client, no we can't, as this is not an Apache forum. I also told you where to find that answer.
If on the other hand you don't want to use that client any more, setting the system properties http.proxyHost and http.proxyPort will do it for java.net.HttpURLConnection. See the Java Custom Networking tutorial for examples. -
How do I configure a VPN Site and Subnets in Lync when clients have /32 Addresses?
Hello,
I've found a few people asking this question out in the "interwebs" but no one seems to quite answer their question (Those poor souls).
In most occasions that I've seen, my customers have configured their VPN networks with a /24 (255.255.255.0) ip address. However, when those clients connect to the VPN they are actually getting a /32 (255.255.255.255) address.
This seems to pose an issue for Lync reporting when it comes to configuring a VPN site and VPN subnets.
(NOTE:You might ask why these customers are not going about best practice and using split-tunneling? In this case, they absolutely CANNOT institute split-tunneling so all traffic MUST flow through the VPN tunnel.)
For example sake, here is how I would imagine to setup a VPN site with subnets in Lync Network Configuration:
VPN (Site)
-172.16.33.0 /24 (Subnet)
-172.16.34.0 /24 (Subnet)
-172.16.35.0 /24 (Subnet)
The problem is that when I run a Location Report in Lync to look at call data to/from the VPN site, it's not there. Reason being, the VPN client was given a /32 address which doesn't match up to the /24 I configured in Lync.
So, in my mind my options are:
Create a /32 subnet for each single address corresponding to a VPN client and attach them to the VPN site (What a mess).
Change the subnet mask for the 3 subnets I've defined to /32 instead of /24 and see what happens even though putting an IP address of 172.16.33.0 /32 doesn't make much sense.
Remove the subnets and site from Lync because CAC and Bandwidth control are actually useless over VPN.
Any thoughts on this?
John K. Boslooper | Lync Technical Specialist | Project Leadership Associates
Phone: 312.448.2269 | www.projectleadership.netJin,
/32 addresses are a valid subnet mask, however that means that a host with a IP Address of 192.168.23.4 and a subnet mask of 255.255.255.255 (/32) is the ONLY host on that subnet.
The VPN configuration is correct. The /32 mask is common with a Juniper VPN (which is what they are using) and the DHCP server that is handing out the addresses is the Juniper VPN appliance.
They have already started working out a plan to use a different internal DHCP relay which should hand out the addresses correctly.
There has to be someone else out there with this issue or that can point out that i'm overlooking one key principal with VPN subnets.
Anyone?
John K. Boslooper | Lync Technical Specialist | Project Leadership Associates Phone: 312.448.2269 | www.projectleadership.net -
How can I configure NI PCI 6221 and DAQ SCB-68 for pressure sensors?
Hello
everybody,
I am using the measuring board (NI PCI 6221) and DAQ
SCB-68 for the data acquisition.
With the DAQ-Assistant I created AI for the voltage of
pressure sensors. In a big indicator panel from this DAQ-Assistant I see the
voltage for both sensors in the correct size. But if I set sensors in the
blockdiagramm to control the signals for sensor one I get a wrong voltage size
and for sensor 2 nothing.
How can I configure this data acquisition equipment to
get the correct signals?
Thanks a lot for your help.I do not know the type of sensor you are using. But pressure transducers may have a very low output voltage(in the mVolt range). They also need an excitation voltage. Here is an introduction. http://focus.ti.com.cn/cn/lit/an/sloa034/sloa034.pdfThen working with pressure sensors I always use 3 stages in the circuit.
1 Instrumentation Amplifier as a preamp
2 filterstage
3 Final amp and output buffer
(you may combine stage 2 and 3)
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far) -
How to Split the string using Substr and instr using loop condition
Hi every body,
I have below requirement.
I need to split the string and append with single quotes('') followed by , (comma) and reassign entire values into another variable. so that i can use it where clause of update statement
for example I am reciveing value as follows
ALN varchar2(2000):=(12ERE-3MT-4Y,4IT-5O-SD,OP-K5-456,P04-SFS9-098,90P-SSF-334,3434-KJ4-O28,AS3-SFS0-J33,989-3KL-3434);
Note: In the above variable i see 8 transactions, where as in real scenario i donot how many transaction i may recive.
after modification i need above transactions should in below format
ALTR Varchar2(2000):=('12ERE-3MT-4Y','4IT-5O-SD','OP-K5-456','P04-SFS9-098','90P-SSF-334','3434-KJ4-O28','AS3-SFS0-J33','989-3KL-3434');
kindly help how to use substr and instr in normal loop or for loop or while loop while modifying the above transactions.
Please help me to sort out this issue.
Many Thanks.
Edited by: user627525 on Dec 15, 2011 11:49 AMTry this - may not be the best way but...:
create or replace type myTableType as table of varchar2(255)
declare
v_array mytabletype;
v_new_str varchar2(4000);
function str2tbl
(p_str in varchar2,
p_delim in varchar2 default '.')
return myTableType
as
l_str long default p_str || p_delim;
l_n number;
l_data myTableType := myTabletype();
begin
loop
l_n := instr( l_str, p_delim );
exit when (nvl(l_n,0) = 0);
l_data.extend;
l_data( l_data.count ) := ltrim(rtrim(substr(l_str,1,l_n-1)));
l_str := substr( l_str, l_n+length(p_delim) );
end loop;
return l_data;
end;
begin
v_array := str2tbl ('12ERE-3MT-4Y,4IT-5O-SD,OP-K5-456,P04-SFS9-098,90P-SSF-334,3434-KJ4-O28,AS3-SFS0-J33,989-3KL-3434', ',');
FOR i IN 1 .. v_array.COUNT LOOP
v_new_str := v_new_str || ''''||v_array(i)||'''' || ',';
END LOOP;
dbms_output.put_line(RTRIM(v_new_str, ','));
end;
OUTPUT:
=======
'12ERE-3MT-4Y','4IT-5O-SD','OP-K5-456','P04-SFS9-098','90P-SSF-334','3434-KJ4-O28','AS3-SFS0-J33','989-3KL-3434'HTH
Edited by: user130038 on Dec 15, 2011 12:11 PM -
How to search for files using wildcards * and ?.
Hi All,
I've been searching the forum for a couple of hours now and have been unable to find a good example of how to search a directory (Windows OS) for a file using wildcards * and/or ?. Does anyone out there have a good example that they can share with me?
ThanksHi All,
First of all I want to thank everyone for taking the time to respond to my question. All of your responses where greatly appreciated.
I took the example code that was posted by rkconner, thanks rkconner, and modified it to allow me to search for files in a directory that contain * and/or ?. Yes, I said and/or! Meaning that you can use them both in the same file name, example: r??d*.t* would find readme.txt.
I've posed my complete and thoroughly document code below. I hope it is very helpful to other as I have searched many forums and spent many hours today trying to resolve this problem.
Enjoy
* File Name: WildcardSearch.java
* Date: Jan 9, 2004
* This class will search all files in a directory using the
* asterisk (*) and/or question mark (?) as wildcards which may be
* used together in the same file name. A File [] is returned containing
* an array of all files found that match the wildcard specifications.
* Command line example:
* c:\>java WildcardSearch c:\windows s??t*.ini
* New sWild: s.{1}.{1}t.*.ini
* system.ini
* Command line break down: Java Program = java WildcardSearch
* Search Directory (arg[0]) = C:\Windows
* Files To Search (arg[1]) = s??t*.ini
* Note: Some commands will not work from the command line for arg[1]
* such as *.*, however, this will work if you if it is passed
* within Java (hard coded)
* @author kmportner
import java.io.File;
import java.io.FilenameFilter;
public class WildcardSearch
private static String sWild = "";
* @param args - arg[0] = directory to search, arg[1] = wildcard name
public static void main(String[] args)
String sExtDir = args[0]; // directory to search
sWild = args[1]; // wild card to use - example: s??t*.ini
sWild = replaceWildcards(sWild);
System.out.println("New sWild: " + sWild);
File fileDir = new File(sExtDir);
File[] arrFile = fileDir.listFiles(new FilenameFilter()
public boolean accept(File dir, String name)
return (name.toLowerCase().matches(sWild));
for (int i = 0; i < arrFile.length; ++i)
System.out.println(arrFile.getName());
} // end main
* Checks for * and ? in the wildcard variable and replaces them correct
* pattern characters.
* @param wild - Wildcard name containing * and ?
* @return - String containing modified wildcard name
private static String replaceWildcards(String wild)
StringBuffer buffer = new StringBuffer();
char [] chars = wild.toCharArray();
for (int i = 0; i < chars.length; ++i)
if (chars[i] == '*')
buffer.append(".*");
else if (chars[i] == '?')
buffer.append(".{1}");
else
buffer.append(chars[i]);
return buffer.toString();
} // end replaceWildcards method
} // end class -
How do I configure the brightness, contrast and colour settings of the built-in HD Camera on iMac?
I have recently purchased an iMac after making the switch from PC.
I am struggling to find an app, or settings configuration where I can modify the brightness, contrast, color and white balance settings for the built-in HD camera. The online manuals didnt give me any answers so I thought I would turn to the communities pages for some help.
The room where the iMac is situated has a light behind me and I am facing the wall so not much light in front of me except the ambient light from the screen. Friends on FaceTime, Skype etc. say that the picture from the built-in camera is too dark and difficult to make out my face clearly. How can I fix this?
Any and all help is most welcome.
Thanks
UKRichardI would move it if it weren't the main room light that is fixed to the ceiling. Not remodelling my house just for the iMac camera. On my old PC all the webcams came with utilities to adjust these settings, I am surprised Apple dont have something similar for free.
I did see another post about iGlasses here, but not sure I want to pay $10 just to adjust my camera settings
Message was edited by: ukrichard -
How to create a user using XML and specifying addional attributes that are objects
I'm trying to create a user using XML and specifying some attributes that are objects and not sure how to do it. How would I set the DirectoryUserAcl to Public?
Here's the xml file:
<?xml version = '1.0' standalone = 'yes'?>
<SimpleUser>
<UserName>mike2</UserName>
<Password>abc123</Password>
<AdminEnabled>false</AdminEnabled>
<HomeFolderRoot>/home</HomeFolderRoot>
<HasContentQuota>false</HasContentQuota>
<DirectoryUserAcl> ??? </DirectoryUserAcl>
<DefaultAclBundleAcl> ??? </DefaultAclBundleAcl>
<HomeFolderPolicyBundleAcl> ??? </HomeFolderPolicyBundleAcl>
</SimpleUser>I figured out the answer:
<?xml version = '1.0' standalone = 'yes'?>
<SimpleUser>
<UserName>mike2</UserName>
<Password>abc123</Password>
<AdminEnabled>false</AdminEnabled>
<HomeFolderRoot>/home</HomeFolderRoot>
<HasContentQuota>false</HasContentQuota>
<DirectoryUserAcl classname="SystemAccessControlList" refType="name">Public</DirectoryUserAcl>
</SimpleUser>
null
Maybe you are looking for
-
I open an e-mail, click on a link, and sometimes it will open, other times it won't. If the website is given in the e-mail, I can copy and paste the site into Firefox, and it will usually open, but I want to know why a valid link won't open. Other ti
-
While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?
-
Lost printing from iPad with B210a
Lost iPad printing capability on B210a after cartridge change; worked perfectly before. Using airport router tied to a Zytel router, iPad Bluetooth disabled. No problem with IMac printing over same wireless network immediately following failed iPad
-
Hey ive recently got a imac which is GREAT! but still want to use my PC for gaming and other odds and ends. is it possible to hook my PC up to the imac and use it as the screen instead of havin two screens on my desktop!!!!
-
Discoverer view change default option
Hi friends, when connecting to discoverer/plus or viewer. The first screen, we will see "Connect to" and the default for this one is "OracleBI Discoverer" I just wonder if i can hide that option. So anytime when i open discoverer plus it i should not