How do I configure smtp to send email

Just bought mt iPad and trying to set up my mailbox.
Sending emails is all good.
But I am struggling to set up my outgoing mail.
My smtp server is mail.mydomain.com
My user name is [email protected]
When I set up the outgoing mail I set mail.mydomain.com as my domain and my user name as [email protected]
When but the iPad tries to authenticate with a user name of [email protected]@mail.mydomain.com
When I set the domain as mydomain.com and my user name as Ian.wermerling then it can not authenticate because I believe it is not authenticating against the actual smtp server.
Any suggestions?
Ian

Has anyone any ideas?

Similar Messages

How to I configure SMTP?.

I have configured with one mailbox server but it throw the following error
"Failure sending email: com.waveset.exception.ServiceNotResponding: 
==> javax.mail.AuthenticationFailedException: 535 5.7.3 Authentication unsuccessful.&#xA "

How to I configure SMTP?.The following section in Configuration "System Configuration" is for SMTP:
<Attribute name="serverSettings.default.emailtemplate">
<Object>
    <Attribute name="smtpHost" value="@email_smtpHost@"/>
    <Attribute name="fromAddress" value="@email_fromAddress@"/>
    <Attribute name="toAddress" value="@email_toAddress@"/>
    <Attribute name="authEnabled" value="@email_authEnabled@"/>
    <Attribute name="userId" value="@email_userId@"/>
    <Attribute name="password"><EncryptedData>@email_password@</EncryptedData></Attribute>
    <Attribute name="ssl" value="@email_ssl@"/>
    <Attribute name="port" value="@email_port@"/>
    <Attribute name="ignoreCert" value="@email_ignoreCert@"/>
</Object>
</Attribute>Values enclosed by @ characters are placeholders.

How to use java mail to send email to hotmail box

how to use java mail to send email to hotmail box??
i can send emails to other box(my company's email account) but for hotmail, the program didnt print any err or exception the recepient cant receive the mail.
thanks

you ust to download activation.jar and mail.jar and add them to your build path.
i have used the googlemail smtp server to send mail the code is following:
public void SendMail()
Properties props = new Properties();
props.put("mail.smtp.user", username);
props.put("mail.smtp.host", host);
props.put("mail.smtp.port", port);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.auth", "true");
props.put("mail.smtp.socketFactory.port", port);
try{
     Authenticator auth = new SMTPAuthenticator(username,password);
Session session = Session.getInstance(props, auth);
MimeMessage msg = new MimeMessage(session);
msg.setText(text);
msg.setSubject(subject);
msg.setFrom(new InternetAddress(senderEmail));
msg.addRecipient(Message.RecipientType.TO, new InternetAddress(receiver));
Transport.send(msg);
}catch(Exception ex) {
     System.out.println("Error Sending:");
System.out.println(ex.getMessage().toString());
and this the SMTPAuthenticator Class which you will need too.
class SMTPAuthenticator extends javax.mail.Authenticator {
     private String fUser;
     private String fPassword;
     public SMTPAuthenticator(String user, String password) {
     fUser = user;
     fPassword = password;
     public PasswordAuthentication getPasswordAuthentication() {
     return new PasswordAuthentication(fUser, fPassword);
     }

How can I block myself from sending email to a certain email address?

How can I block myself from sending email to a certain email address? I am in the middle of a relationship ending and I want to RESTRICT myself from being able to send outgoing email to a certain email address. Please advise. I have no will power and I don't want to be engaged in back and forth email drama. Thanks.

Might sound kind of silly, but you could go into Contacts, the person in question, edit, and where it says Add Field, put somthing in like STOP, or DO NOT DO THIS
At least that would get your attention, even if it doesn't block you from emailing.
There just isn't much you can do to block yourself. If you have a couple close friends, do something like an AA support group...call a friend and have them talk you out of emailing.
I'm not trying to be smart alecky about this, actually trying to help, but there isn't much to offer.

How to configure SMTP dynamic send port?

Hi,
I am trying to configure STMP send port to send emails, enabled SMTP Server on the DEV box and configured it as described in the link below.
https://sandroaspbiztalkblog.wordpress.com/2013/05/09/biztalk-2013-installation-and-configuration-install-and-configure-smtp-server-feature-part-4/
Able to send emails using Telnet client, and these email get stored in C:\inetpub\mailroot\Queue folder.
I have a dynamic send with following values.
msgEMail(SMTP.CC) = “[email protected]”;
msgEMail(SMTP.DeliveryReceipt) = False;
msgEMail(SMTP.From) = “[email protected]”;
msgEMail(SMTP.ReadReceipt) = False;
msgEMail(SMTP.Password) = “XXX;
msgEMail(SMTP.Username) = “DDD”;
msgEMail(SMTP.SMTPAuthenticate) = System.Convert.ToUInt32(XX.SMTPAuthenticate);
msgEMail(SMTP.SMTPHost) = “smtp.domain.local”;
msgEMail(SMTP.Subject) = “sdfgdfgd;
msgEMail(SMTP.MessagePartsAttachments) = 2;
Message gets suspended with the following error message.
A message sent to adapter "SMTP" on send port "XXX_DynamicSendPort_XXXX" with URI "mailto:
[email protected]" is suspended.
Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLTransmit,
Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=81bf3856ad764e35" Source: "XML assembler" Send Port: "XXX_DynamicSendPort_XXXXX URI: "mailto:localhost" Reason: Data at the root level is invalid.
Line 1, position 1.
MessageId:
{3C50F418-24C4-4661-9B34-4B7F5F6FBBA4}
InstanceID: {2F6B9A0E-92EE-4953-81D2-9A124FAC99CE}
Please can some advise me what is wrong here? do you think I have configured
msgEMail(SMTP.SMTPHost) property correctly? Or should it be the name of the DEV box?
Thanks
SS
Shiva Sadayan

Hi Shiva,
You should not be using XMLTransit pipeline at the send port.
Perhaps you should go with default passthrough pipeline or
Create a send pipeline with MIME/SMIME encoder and drop it at Encode section of pipeline. Accept the default settings for MIME/SMIME encoder and use it with the dynamic port.
I found this article very useful while sending email from BizTalk. Refer:
Sending Emails in Biztalk
Rachit
Please mark as answer or vote as helpful if my reply does

Javamail program - how can to use yahoo's smtp to send emails?

hi,
can you please tell me how to use yahoo's smtp so that i can send emails through a javamail program.
i read that yahoo requires authentication.
thanks

Your are in the wrong forum. This forum goes on the mail server of Sun. Do not be mislead by the term Java in the name.
Cheers, Ben

Configure Exchange to send emails to external addresses

I am working on a demo and I installed Exchange 2010 on the development environment for using in the Demo. Now I need to send e-mails outside of the development environment - to the actual corporate email addresses and I have been given a mail relay "smtp.corp.XXX.com".
How do I configure Exchange to use that mail relay and (1) send e-mails from the dev Exchange and (2) receive emails using the mail relay? Can someone please help?
I do not have any knowledge/experience about Exchange. I was just given Exchange setup files and I installed it using the default configuration. So it would be helpful if you could point to some step-by-step articles.
Thanks a lot!
John

Hi John,
We can following these steps to create a relay connector in Hub Transport server:
1.Open Exchange Management Console.
2.Expand Server Configuration > Hub Transport.
3. Select the desired Hub Transport.
4.Click on New Receive Connector item located on the Toolbox Actions.
5. On the Introduction page, Name our connector (Relay) and select Custom, then click Next.
6. On the Local Network settings page, remove the existing
All Available IPv4 entry. Add a dedicated IP address for this connector, set the Port to 25 and specific the FQDN: smtp.corp.XXX.com.
7. In Remote Network settings page, remove the default IP range and click Add button to
type the IP address or IP address range for the remote messaging server or servers that are allowed to relay mail on this server.
8. Click OK to add it and then Next to continue.
9. Click New button to complete the wizard.
10. In the work pane, select the Receive connector that you created.
11. Under the name of the Receive connector in the action pane, click Properties to open the Properties page.
12. Click the Permission Groups tab. Select Anonymous users.
13. Click OK to save your changes and exit the Properties page.
14. Run the following command to grant relay permission to anonymous connections on the new Receive connector:
Get-ReceiveConnector "Relay" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient"
Here is an article about it:
http://technet.microsoft.com/en-us/library/bb232021(v=exchg.141).aspx
Regards,
Winnie Liang
TechNet Community Support

SMTP Server Sending Emails from mymac.local

I ran a "fetchmail -a" command in terminal not thinking it would work from the command line. It worked and downloaded all my mail from Gmail locally to my mac into /var/me/mail. About 8000 messages in total.
But it also started relaying all those messages through a postfix program I didn't know was running.
From what I can tell it tried to relay every message I was sent in my gmail to mymac.local and when it couldn't it send NDR messages back to the address that was trying to send it (i.e. the original sender that sent it to my gmail).
So to cut a long story short everyone who ever sent me an email got an NDR saying a message they sent to mymac.local could not be delivered. I was spamming them but I did not know it until a few hours later. At that time I killed the postfix program that (i think) was running an SMTP server relay on my machine. (I have MAMP installed for web development)
I still do not know if it has stopped sending as I cannot view what has been sent or not been sent in any log files.
How do I make sure everything (SMTP relays/postfix etc.) has stopped sending?
How do I turn off ability to send anything from my local machine?

Hi,
Some ISPs will only allow a device to send emails from their server when its connecting to the Internet over their network.
If the iPod touch is connecting to the Internet over the cellular network, you will most likely have to enable an alternate outgoing mail server(one that can only send over the cellular network). This article: http://support.apple.com/kb/TS1426 provides more details about enabling alternate SMTP servers.
You can avoid ISP related send mail issues by switching to another email provider, like MobileMe, Yahoo!, or Gmail.
-Jason

How do i configure SMTP Mail ?..

I have configure the mail but it shows following error can anyone suggest me regarding that...
"Failure sending email: com.waveset.exception.ServiceNotResponding: &#xA;==&gt; javax.mail.AuthenticationFailedException: 535 5.7.3 Authentication unsuccessful.&#xA;'"

did u enter the correct smtp server name? r u entering wrong login/password somewhere? Also search on Metalink of this error there are lots of documents regarding the error u r facing. There may be specific document with solution aswell.

Problem configurationing Agents for sending email

Hi,
Do you know how can I configurate option for add email recipients, so that I can type an email address and send agent by email ?
Nowadays the option: "add email recipients" is only enable for user administrator and I need enable for another users.
I will appreciate your help
Thanks

hmm
without creating user... I would suggest to change your email address to others for a ibot and revert it back when you are done.
If not create dummy users and set profiles and use.
If helps mark

OS X Server 10.5.8 - SMTP not sending emails

Hi,
Clean install 10.5.8 Server. DNS and receiving emails works fine, but when i try sending emails with webmail or any mail client it doesn't work.
smtp log :
"Serveur postfix/postfix-script[14806]: fatal: the Postfix mail system is not running"
With Postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps =
luser_relay = admin
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 20971520
mydestination = $myhostname,localhost.$mydomain,localhost,Serveur.local,kctus.net
mydomain = kctus.net
mydomain_fallback = localhost
myhostname = kctus.net
mynetworks = 127.0.0.0/8,192.168.1.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost = smtp.orange.fr
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdenforcetls = no
smtpdpw_server_securityoptions = plain,login,cram-md5
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550
Any help plz ?

Please increase logging level for SMTP to "Information". Next try to send mail and post the relevant log entries.

How to create a BO for sending emails

Hi All,
           I want to create a Business Object which should have an event for sending emails.
          Please guide me on this.
Thanks in Advance,
Saket.

Hi Raj,
See i will explain why i want it.In the link it's done as below:
IF ZCUST_INFO-COUNTRY = 'IN'.
    DATA: W_OBJTYPE TYPE SWETYPECOU-OBJTYPE,
          W_OBJKEY TYPE SWEINSTCOU-OBJKEY,
          W_EVENT   TYPE SWETYPECOU-EVENT.
    W_OBJTYPE = 'YH355_BO'.
    W_OBJKEY = ZCUST_INFO-CUSTNO.
    W_EVENT   = 'SENDEMAIL'.
    CALL FUNCTION 'SWE_EVENT_CREATE'
      EXPORTING
        objtype                       = W_OBJTYPE
        objkey                        = W_OBJKEY
        event                         = W_EVENT
    COMMIT WORK.
ENDIF.
But here w_objtype is a custom BO and also w_event = 'SENDEMAIL' .This event too
is a custom event.
Now i want to know what code is there in this custom BO because it is this BO which triggers the email through SENDEMAIL event.
Hope i am clear here.
waiting for your reply.

TS3899 my Iphone allows me to receive but not send emails. How do I get it to send emails?

My iphone will not send email messages, only receive them. It is linked with my Mac. Wondering if the issue has something to do with Itunes being registered with my husband's account? Maybe I'm grasping at straws...

Thank you! I am so tech deficient that I just don't know what to do when I have a problem and this fixed it right away and was so easy for me to follow your directions. Really appreciate your help!!

How do you configure SMTP for emailed alerts?

I'm using the current Mavericks Server. I would like to configure Alerts to email Alerts to me. My server is *not* an email server, so email alerts would have to go out through an external SMTP server. How do I specify the SMTP server that should be used for emailing alerts?

I think the only way to set it up via the GUI is to activate the mail server service and set it to send through the external SMTP server.

SMTP Configuration - Unable to send email

I am unable to send e-mail with my iPad. I know I have the SMTP server names, user IDs, and passwords setup correctly. In the PC, world, I would go into MS-Outlook and check the box labeled 'Log into incoming mail server first'. And it would start working. Incidentally, I am using GoDaddy email which, in my case, is smtpout.secureserver.net and I have e-mail relays turned ON.
Thank you.

I have my password correct and at this point sometimes the send works and sometimes it fails. I don't know what more to do with it.
Does anyone know of any e-mail programs for iPad that work better. I've noticed the SMTP setup for multiple e-mail address is rather odd anyway, so I'd love to find a better program.

How do I configure smtp to send email

Similar Messages

Maybe you are looking for