How do I connect my canon ip3400

I had to unplug my computer, printer, modem and router.
I put it back together but now I can't print. I see the printer in the 'print dialog'
showing the printed job, trying to connect, saying printer is not connected.
What did I forgot to connect?
I use airport exterm
mac 10.4.11
Thank you

Hi p,
What connections does the Canon have? If it has a FireWire output, connect that, open iMovie and import.

Similar Messages

  • How do I connect my canon mp490printer

    How do I connect my canon mp490printer

    The ipad prints wirelessly via the AirPrint technology. All the Canon printers that support AirPrint are listed here:
    http://support.apple.com/kb/ht4356
    Unfortunately your printer is not on the list.

  • How can I connect my Canon ZR200 camcorder

    how can i connect my canon ZR200 camcorder to my new imac

    If it's a new iMac with a Thunderbolt port, you should get the following:
    Apple Thunderbolt-Firewire adapter
    9-pin to 4-pin FIrewire cable like this one

  • How do I connect a Canon Selphy CP900 using the USB port on Time Capsule

    I am running a MacBook Pro with Mountain Lion (10.8.5) and have installed the CP 900 driver (6.2) supplied by Canon from their website.  I have a Time Capsule set up as a stand alone internal network at my home and use it as a network attched hard drive directly - not via Time Machine.  I can "see" the printer when I connect but cannot print to it.    I open a photo in preview and select the printer and print.
    I get a
    Cannin Selphy CP Generic
    connection method not supported message - 9786
    The printer does show up in my Print and Scan control panel in System Preferences
    I also cannot reach it to check suplies
    At the print it dsiplays the printer to computer connection via USB
    Any help would be appreciated.
    Thanks, Asa

    Hi Asa,
    I experienced the same error -9786 although I'm not using the time capsule, but only through the wifi.
    I did following and resolved the problem.
    1. I re-installed the driver software.
    2. I re-configured the printer settings. (System Preferences - Printers and Scanners - "+" button)
    3. I didn't add the selphy manually, but just I just input "CP" in the searchbox in "Add" dialog, and clicked "OK" button then the printer is set automatically.
    4. I tried pringing a photo from iPhoto and could print correctly.
    it looks like the key action is #2 and #3 above, so why don't you give a try?

  • How do I connect my Canon wireless to iPhoto

    I bought a Canon Elph 300HS wireless camera.  I want to have the pictures I take go into iPhoto. 
    How do I do this?

    iPhoto has no such ability. You'll need to establish contact between the camera and the Mac before iPhoto can see it. I'd ask Canon.

  • How can i connect my canon mx430 series to my mac? It was connected then failed.

    in the middle of taxes printing  the printer quit. now printer which is cable to computer wants to go wireles. I am 80 and stumped.

    Hi!
    To ensure the most accurate information is provided, we will need to know the specific version of Mac in use (ex. 10.7, 10.8, 10.9 etc). You can find this information by clicking on the Apple sign in the top-left corner and choosing 'About this Mac.'
    If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
    Thanks and have a great day!

  • HT4507 How do I connect my Canon ImageClass 4000 BW printer on Lion?

    Hello every one,
    I have a Canon ImageClass 4000 printer which was working fine with my OS 10.6, but since I installed Lion, I can not print. I would really appreciate if you could help me with this. Thanking you in advance.

    Sorry for my confusing reply. I had never heard of the imageCLASS 4000 so that's why I thought it was an MF4000 series. Seems like it was only sold in the USA and quite a number of years ago.
    So I checked the Canon USA web site and saw the hqx package you refer to containing the old Adobe PS driver for OS8. I also saw an old version of a PCL and PS driver for Windows.
    So working on the assumption that the device does support Postscript you should be able to create a printer queue using the Generic PS driver included with Lion. If this doesn't print or simply prints rubbish then change the printer queue via Options & Supplies > Driver to use the Generic PCL Laser driver.

  • How do you connect iPad to canon printer

    How do you connect a canon wireless printer up to a iPad 2nd generation?

    Read this to see if your printer model supports Airprint: http://support.apple.com/kb/ht4356
    If your printer is not Airprint capable you may need an App to print, for example PrintCentral, etc.

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • How can I connect multiple devices to Mac mini display port? I need to connect a Canon 5D to my Mac and display the result on a VGA video projector. I am using mini hdmi to mini display for the camera. Can I connect the VGA to any other port?

    Hi there I am connecting a Canon 5D to my laptop trying to use it as a webcam trough camtwist.
    At the same time I need to output the streaming to a videoprojector.
    The cam is connected to the mini display port do there is no port available for the VGA cable anymore.
    Do I need to use a different port for the projector? Should I buy a video card?
    Can't connect the camera via USB as that is too slow and it will freeze.
    Many thanks for all your help
    Best
    Faeve

    You might do better on a forum other than this one, which is "Using iPhone"

  • How to connect a Canon Elura 50

    I have a Canon Elura 50 (NTSC Digital Video Camcorder) circa 2003.  I know I have connected it in the past to a former version of iMovie, but have forgotten the magic.
    Now that I have iMovie 11 and a new iMac (late 2012) with Tunderbolt connection, can I connect the Canon for A) live video to use with Skype or FactTime, and B) to download movies recorded with this camera?
    The Elura 50 has both USB and DV outs, but when connected via USB the camera appears to be invisible to iMovie, FaceTime and Skype.  I haven't yet tried the DV to to Thunderbolt yet (or to Firewire via a Thunderbolt adapter.
    (In fact, I see no way in preferences to select an experior camera for FaceTime at all.  I also find no controls in System Preferences for adding second cameras to the iMac.)
    Can anyone point me to specific or even general information about the proper connections for a second camera?  Help with connecting my Elura 50 would be greatly appreciated.
    Thank you.

    Hi
    I haven't yet tried the DV to to Thunderbolt yet (or to Firewire via a Thunderbolt adapter.
    But that is the way to do it if Your Mac don't have a FW400 or FW800 connector.
    BTW - the FW400 to FW800 converter works BADLY and is not recommended from me.
    Your Camera has
    • USB - to transfere still Photos from it's memory-card to iPhoto (or to Your Mac in other way)
    • mini FW (FW100 - 4-pin) connector - to be able to Export DV movies to Your Mac and iMovie or FinalCut or iDVD or Adobe Premiere etc. There are no way around FW-Cable.
    Yours Bengt W

  • How do i connect my ipad to a canon printer?

    im trying to connect a canon pixma MG3250 to my ipad,i connected the printer to the house router,what next?what do i have to do with the ipad?

    Nothing.  Once the Printer is Connected to the same Wifi rotuer as the iPad, and since it does appear to be a supported model here:
    AirPrint Basics
    http://support.apple.com/kb/ht4356
    The iPad should automatically detect it in the Print box in most Apps.

  • Connecting the canon SX50 to HDTV for video playback???

    Connecting the canon SX50 to HDTV for video playback???
    ok, Got this Camera, like it, except for a few confusing issues. I was told, in order to playback HD video onto my HDTV Samsung, with an HDMI4 on the left side of the TV, all I needed was a HDMI to HDMI cable.
     (#1) Shut off both TV and camera, plug the cable into this HDMI plugin, turn on the TV and Camera power supply, and it should recognize, then start paying.
    Well, I did it both ways, (#1) shut off,then turn on, and (#2) I just inserted the camera's HDMI to the HDMI4 while both were on, and tried opening up the Samsung's' Tools >Inputs, etc, and still nothing!
    Is there an easy way to accomplish this?
    The second issue i'm having , is how to shut off the slow motion playback, when viewing the videos, which were not recorded in slow--mo, and it's frustrating trying to playback in normal speed, but instead it plays in slow-mo.
    I'm not quite sure I'm recording in full HD...The payback is only 60i

    Thanks grazie!
    Well, i accomplished most of that and at least got the video on the display (Samsung Anynet HDMI3) But no sound!
    I was also able to control the SX50 TV Display with my samsung remote, kool.
    As far as the playbgack volume, I checked the camera, I did notice the OPERATIONAL SOUND was off, but when I played back the video on the camera itself, i did have volume.
    On that subject of Slow motion videos, if i'm watching each video, then see one playing back in slow-motion, does that mean i actually filmed it in slow motion, without knowing? ( i can send it through Pinnacle Studio 15HD and speed it back up, but theres no background volume anyway)  if i did unknowingly videotaped in slow motion, i bettter be more observant in the future.
    I'm going to increase that ''Operational sound'' on the tools / Camera and try to playback to see if I have any sound.
    I have a Yamaha 7.1 reciever, and TV, BD player,Time-Warner cable all is connected to this receiver....I was pushing all buttons for inputs to see which one would work for sound with video, but could not find any.  Thanks, or grazie grazie!

  • I wirelessly connected a canon airprint to my iphone but can't get it to print landscape only portrait

    first time using this site. Question per above is successfully connected a canon airprint with my network and iphone. Have successfully printed portrait style but can't figure how to print a landscape.
    Thanks

    Ringtones (along with audiobooks) are currently a one-time only download from the store. If you want it on your iPad then you will need to connect the phone to your computer's iTunes and do File > Devices > Transfer Purchases (it shoudl copy over to the Tones part of your iTunes library), and you can then sync it to your iPad

  • I could not connect my canon MG5220 to my macbook pro  version Mac OS X Lion 10.7.5.

    i could not connect my canon MG5220 to my macbook pro  version Mac OS X Lion 10.7.5. how could i connect wireless?

    Contact Canon tech support or visit their support site for assistance as well as downloads of compatible drivers for Lion or later.
    OS X Mavericks- Set up a printer
    OS X- Printer and scanner software available for download

Maybe you are looking for

  • über problems with Z10 for past two weeks.

    Hi there For the past two weeks I've been having major problems with my Z10. I started noticing that my Whatsapp messages were coming through, but not making a sound. I reset and set the notification settings again, but still no luck. I figured since

  • How do I centre javascript in a HTML page? Please help!

    Ok, I recently set up a website with advertising space. The space is split into banner engines of 10 banners each rotating every 7 seconds. I have fully tested the coding which I downloaded and it all seems to work as well as I need it to. The only p

  • How do you change the page format to print a larger area?

    Hi there, another new to mac and new to numbers guy. I'm trying to find the windows equivalent to change page format. I want to reduce the blank border surrounding my table and print a larger area. How do you reduce the blank border that prevents you

  • PDF opens in Reader but Reader is not my default viewer

    I have doPDF as one of my printers so I can create a PDF file. In Control Panel Folder Options, my default PDF viewer is set to Foxit. That is what I want. I have Acrobate Reader on my PC for the rare instances I NEED Acrobate Reader. When I select d

  • Unable to Kill Session

    Good day all in my db i found the one session hang my table .but when i try to kill it i receive the following message 'session marked as kill' when i run SELECT SID, SERIAL#, STATUS FROM V$SESSION i found its status is kill but it still make my tabl