How do i data exchange between TestDirector and labVIEW

Hai to all,
By using one COMServer(VC++), that COMServer exchange the data between TestDirector and LAbVIEW7.0, How to call LabVIEW function in activex, is it posible or not?
if posible please post your answer.

Hi reddys,
You can call the LabVIEW ActiveX Automation Server.
This can be done from any programming language.
Following the links below, you will find some examples.
Calling LabVIEW from C++ Using ActiveX
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3E21356A4E034080020E74861&p_node=DZ52051&p_submitted=N&p_rank=&p_answer=&p_source=External
Calling LabVIEW as an ActiveX Server from Visual Basic
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3E3D756A4E034080020E74861&p_node=DZ52051&p_submitted=N&p_rank=&p_answer=&p_source=External
Communicating with LabVIEW from Delphi using ActiveX
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3E8D156A4E034080020E74861&p_node=DZ52051&
p_submitted=N&p_rank=&p_answer=&p_source=External
Calling a LabVIEW VI with the LabVIEW ActiveX Automation Server
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D85956A4E034080020E74861&p_node=DZ52156&p_submitted=N&p_rank=&p_answer=&p_source=External
Remote Control (Launch) of LabVIEW Using ActiveX/DCOM
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B123AE0CBA64111EE034080020E74861&p_node=DZ52051&p_submitted=N&p_rank=&p_answer=&p_source=External
I hope this helps!
Regards,
Richard H.
National Instruments

Similar Messages

Standard XML schema for Vendor data exchange between SAP and other system

Is there a SAP standard way of XML schema that we exchange between SAP and other system? Please let me know.
Thanks.

See SAP Interface Repository (http://ifr.sap.com).
My proposal is to leave old SAP connectors staff and use SAP Exchange Infrastructure. There is a support of industry XML standards in XI 3.0 like xCBL.

Basic question regarding Contract data exchange between CRM and ERP

Hi,
1) At a very general level, can somebody tell me via what technology are contract documents exchanged between CRM and ERP? IDocs, RFC modules or proxies?
2) Is it possible to sychronise changes in a contract, e.g. if the contract is changes in the ERP system, those changes are auotomatically updated in the CRM contract?
3) Can somebody point me to any documentation on this?
Kind Regards,
Tony.

contracts are exchanged between CRM ans ERP ssytem ny RFC and FM , you use object SALESCONTRACT for this,it is possible to synchronize changes between both the systems

Data exchange between SCM and ERP

Hi Guys,
Can you please tell what all data is exchanged between ERP system and SCM system.
I am doing a project to find out the exchange of data between these systems, it would be great if u can help me out or throw a direction to find these details.
Thanks a lot guys
Regards,
Kumar
POINTS ASSURED

Hi Kumar,
Please find detailed document help link as below:
http://help.sap.com/saphelp_scm70/helpdata/en/64/08533b89050863e10000000a114084/frameset.htm
For master data following data flow occurs from ECC to APO:
u2022     Products
u2022     Locations
u2022     Classes and characteristics
u2022     Batches
u2022     Setup groups
u2022     Resources
u2022     Production Process Modes / Produtc Data structures
Transaction data flow
u2022     Sales documents
u2022     Stocks
u2022     Inspection lots
u2022     Purchase orders and requisitions
u2022     Planned orders
u2022     Maintenance orders
u2022     Project / network orders
Regards
Datta

Interface between paravision and labview

Hi,
Does any one here who can help or give some idea how to make an interface between paravision and labview software???I need to acquire captured MRI image from paravision and store it to Labview.
I would appreciate for any kind of assistance.
Kind Regards,
Jasim

Hi Jasim,
Could I get a little more information about how you are importing the MRI image into LabVIEW?
1) How are you getting the MRI image into LabVIEW?
2) What image format will the image be in?
3) What will you be doing to the image once it is in LabVIEW?
Best Regards,
Bill
Bill E. | Applications Engineer | National Instruments

Secure the file/data transfer between XI and any third-party system

Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
Venkat

Hi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat

How to create shared folder between mac and windows

how to create shared folder between mac and windows

Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC

Hi
How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC datasources at RSA3?
I'm very new to retail BI.
I think there is no setup tables for Retail infosources.
Any IDoc or BAPI activation is required or other procedure?
We are in BI-700 SAPKW70015 support pack R/3 side
and SAP_BW 700 Support pack SAPKW70016 &
BI_CONT 703 Support pack SAPKIBIIP9 BI side
Can anyone guide me how to load data?
Points assured
Thanks in advance
Ramana P

Dear Ramana,
There is no setup table for POSCAS and POSREC.This has to be popuated with a BADI Implementation.
As of PlugIns 2002_1_470 and 2002_2_470, POS data is update into BW the 2LIS_44_POSREC and 2LIS_43_POSCAS extractors using a BADI. To be able to update data into BW, the relevant implementation for the BADI must be activated in each case. You can activate the implementation in transaction SE19. The implementations are as follows:
POS_EX_REC_PI2003_1 for extractor 2LIS_44_POSREC
POS_EX_CAS_PI2003_1 for extractor 2LIS_44_POSCAS
Once the activation of BADI , create the back ground jobs for the 44 application and the data is pushed into Delta queue and it can be loaded into BI .
Hope this helps you.
Thanks,
Krishna Charan

How to Configure MS Exchange 2007 CCR and SCC Cluster in a single system

Hi i want to configure ms-exchange 2007 server for both SCC and CCR. i have two Windows Server 2008 on running on my hyper-v. by using cluster on both hyper v i want to install MS-Exchange 2007 for both SCC and CCR. ideally one windows server 2008 has
Active Nodes and another one has passive nodes. please guide me as i am new in the field

Duplicate of
http://social.technet.microsoft.com/Forums/exchange/en-US/edea43a1-59b4-4d26-9b41-76d0f4677095/how-to-configure-ms-exchange-2007-ccr-and-scc-cluster-in-a-single-system?forum=exchangesvrgenerallegacy#c6e08365-c01a-40aa-a8bc-94219757ef13
Blog |
Get Your Exchange Powershell Tip of the Day from here

Data Replication Between Sqlserver and Oracle11g using materialized view.

I have Sqlserver 2005 as my source and oracle11g as my target.I need to populate the target daily with change data from source.
for that we have created a dblink between sqlserver and oracle and replicated that table as a Materialized view in Oracle.
problem we are getting here is Fast refresh option is not available.each day it will pick full data from the source.
is there any way to use Fast refresh in this scenario??
Thanks in advance.
Regards,
Balaram.

Pl do not post duplicates - Data Replication Between Sqlserver and Oracle11g using materialized view.

How to track data exchange

Hi All,
I am working on a load generator application where i record client interactions(request and response objects) in XML serialized form.
Now i want to replay those recorded stuff. I am able to replay simple
calls(requests) using reflection APIs.
But the problem comes when i have to use data returned by one call in a later stage in another call. So there should be some mechanism to track data
exchange while recording and use this tracking mechanism while replaying?
I think might be i need some HashMap type structure but not sure !:)

Thanks Roy.
JMeter deals with Web Applications but not ejb application clients
I have recorded ejb calls in XML serialized form. When i was going to replay those recorded scenarios, i found a very
big problem. The problem is divided into 3 cases:
/*Case1:*/
Var x = func1.a ();
. // Some intermediate statements
func2.b (a, b, x);
/*Case2:*/
func2.b(a, func1.a(), b);
/*Case3:*/
Var x = func1.a();
. // Some intermediate statements
Variable x is updated
func2.b(a, b, x);During replay of those recorded calls
You can see the values returned by func1 call(it was already recorded) have
been used in func2(this call is already been recorded) in 3 different ways.
I have to find these correlations during runtime (replaying of those recorded calls) and have to pass these dynamic values returned by func1 to func2 instead of those values which are in recorded script.

How to establish the connection between crm and r/3

Hi,
Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
Could any one tell me where to find adapters and plugins for this.
Thanks in advance.
Ajey

Hello Ajey,
in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
B01: CRM Generation
C71: CRM Connectivity
B09: CRM Replication
from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
Regards
Gregor

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

How can I transfer photographs between Revel and Photoshop (CS3)?

How can I transfer photographs between Revel and Photoshop (CS3)?
any Ideas?

Hi poetryplease,
Unfortunately, there is no Creative Cloud connection between CS3 and Revel. You can upload your images that you have edited, etc, in Photoshop from your desktop into Revel or download your Revel images to your desktop then open in Photoshop.
Glenyse

How to retrieve data from catsdb table and convert into xml using BAPI

How to retrieve data from catsdb table and convert into xml using BAPI
Points will be rewarded,
Thank you,
Regards,
Jagrut BharatKumar Shukla

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

How do i data exchange between TestDirector and labVIEW

Similar Messages

Maybe you are looking for