How we can display the running time as an output by writting abap report?

hi to all,
my name ahmed iam just abap fresher.i know java/j2ee very well.
i want to display the runing time as an output of abap report.Is it possible if possible how.

Hi,
system field SY-UZEIT
WRITE : SY-UZEIT.
Regards,
V.Balaji
Reward if Usefull...

Similar Messages

How do I display the complete time sequence for a video clip in iMovie?

How do I display the time complete time sequence for a video clip in iMovie?
I'm trying to create a movie for someone where they provided me the video clips and what time sequences they want extracted. For example: Video footage from time 5m22s to 9m:18s and 11m17s to 15m31s from the imported video clip. I know you can select video but I cannot figure out how to select from those requested time markers.
Any help would be apreciated.

Open the file using QuickTime Player and then open the Movie Inspector window.

How I can display the values in one row when they come from the same colum

This query
SELECT
sorints_ints_code
FROM
saturn.sorints a,
connman.cc_adm_prospect_master
WHERE
sorints_ints_code like 'Z%'
and sorints_pidm = prospect_pidm
give me the results of
ZA
ZB
ZC
I want to use this query in a cursor to update a column in another table, the problem is that I need to update the table concatenating the values ZA,ZB,ZC
I have 24 different codes stored in the column sorints_ints_code, so I don’t want to use 24 different cursors and I don’t to use cross reference, It is there any way that I DON’T know to display the data like this za,zb,zc without using cross reference, I don’t want to use the table 24 times…
Like THIS, this is only for two values…
SELECT
a.sorints_ints_code,
b. sorints_ints_code
FROM
saturn.sorints a,
saturn.sorints b
connman.cc_adm_prospect_master
WHERE
a.sorints_ints_code = ‘ZA’
AND a.sorints_ints_code = ‘ZB’
and a.sorints_pidm = prospect_pidm
and b.sorints_pidm = prospect_pidm
REMEMBER, I have 24 different values
I am trying to write a procedure like this;
Someone suggest this v_int_code1 := v_int_code1||interest_coach_rec.sorints_ints_code;
BUT IT IS NOT WORKING!!!
PROCEDURE prospect_coach_interest_upd
p_prospect_term_code IN srbrecr.srbrecr_term_code%TYPE,
p_prospect_admin_err_code OUT VARCHAR2,
p_ora_err_code OUT NUMBER,
p_ora_err_msg OUT VARCHAR2
) IS
v_out_path VARCHAR2(40) := '/home/connman/student';
v_out_file VARCHAR2(40) := 'cc_adm_prospect_'||p_prospect_term_code||'_'||TO_CHAR(SYSDATE,'YYYYMMDDHH');
v_file_handle UTL_FILE.FILE_TYPE;
v_pidm NUMBER;
v_int_code1 varchar2(30);
v_int_code2 varchar2(2);
v_int_code3 varchar2(2);
CURSOR cur_pidms IS
SELECT prospect_pidm
FROM connman.cc_adm_prospect_master
WHERE prospect_term_code = p_prospect_term_code
FOR UPDATE;
CURSOR interest_coach_cur is
SELECT
sorints_ints_code
FROM
saturn.sorints
WHERE
sorints_ints_code like 'Z%'
and sorints_pidm = v_pidm ;
interest_coach_rec interest_coach_cur%ROWTYPE;
BEGIN
UTL_FILE.FCLOSE_ALL;
v_file_handle := UTL_FILE.FOPEN (v_out_path, v_out_file, 'a');
UTL_FILE.PUT_LINE (v_file_handle,
CHR (10) || TO_CHAR (SYSDATE, 'DD-MON-YYYY HH:MI:SS')
UTL_FILE.PUT_LINE (v_file_handle, 'Entering the Admin Name procedure.');
--- BEGIN
FOR rec_pidms IN cur_pidms
LOOP
EXIT WHEN cur_pidms%NOTFOUND;
v_pidm := rec_pidms.PROSPECT_pidm;
v_int_code1 := v_int_code1||interest_coach_rec.sorints_ints_code;
IF interest_coach_cur%ISOPEN
THEN
CLOSE interest_coach_cur;
END IF;
OPEN interest_coach_cur;
FETCH interest_coach_cur
INTO interest_coach_rec;
IF interest_coach_cur%FOUND
THEN
UPDATE
connman.cc_adm_prospect_master
SET
PROSPECT_COACH_INTEREST = interest_coach_rec.sorints_ints_code
WHERE CURRENT OF cur_pidms;
END IF;
END LOOP;
COMMIT;
p_prospect_admin_err_code := '0';
UTL_FILE.put_line (v_file_handle, 'Successful Completion.');
EXCEPTION
WHEN OTHERS
THEN
p_prospect_admin_err_code := '1';
p_ora_err_msg := SUBSTR (SQLERRM, 1, 2000);
p_ora_err_code := SQLCODE;
END; -- prospect_coach_interest_upd;

Search in the forum or web you will find many solutions
Return multi-row result as one comma-delimited row
http://www.oracle-developer.net/display.php?id=412

How we can find the eaxct time which pragram takes to run

hi,
i have written a program in two different ways.
i wnat to check which one is taking less time.
is there any way we can find out excatly how much time is taken by the rprogram to run when irun it using F8

The runtime analysis provides an overview of the duration and performance of your source code, from individual statements up to complete transactions.
Choose Menu ® Test ® Runtime Analysis or transaction SE30 to start the runtime analysis. In the initial screen, you see the four main functions of this tool, which can be activated by pushing the corresponding button.
·         Measurement in dialog status
·         Measurement of external session
·        Selection of measurement restrictions
·         Evaluation of measurement results
With large applications, it is advisable to first analyze the entire application and then check details in the hit lists.
With the following information you can carry out the analysis, display and interpret the results, and use this as a basis for optimizing your programs.

Having Millions of Records in table how we can reduce the exicution time

We have developed report it takes time to running eighteen hours background job monthly data because having millions of records in tables and used loops also Could you please help me how can read record million wise as parrlel exicution to reduce time

Moderator message - Welcome to SCN.
Please search the forums before asking a question.
Also, Please read Please read "The Forum Rules of Engagement" before posting! HOT NEWS!! and How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Thread locked.
Rob

On iPhone 6, How do I display the date, time, and location where a photo was taken

On my previous iPhone (4S), I used the "Info' option in iPhoto to see where and when a photo was taken. I have a new phone (iOS 8.3) and iPhoto is not supported, so I have to use the Photos app. I cannot figure out how to see where and when a photo was taken in the Photos app. Thanks for any insight anyone can provide.

Hello there, marklewis.
When wanting to find location information of photos on your iOS device in iOS 8, the online User Guide provides some great information for how to search:
View photos and videos - iPhone
View by location. While viewing by year or by collection, tap . Photos and videos that include location information appear on a map, showing where they were taken.
While viewing a photo or video, tap to show and hide the controls. Swipe left or right to go forward or backward.
Search photos. From Albums or Photos, tap to search by date (month and year), or place (city and state). Search also keeps your Recent Searches on hand and gives you a list of suggested searches.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How i can display the smartform in PA40.

Hi to ALL,
I have requirement to generate the smartform in PA40,when in PA40 select one liek confirm and press F8, then
the form will be display.Plz let me,it is very urgent.
Thanks in advance
Regards
hiddu

Search in the forum or web you will find many solutions
Return multi-row result as one comma-delimited row
http://www.oracle-developer.net/display.php?id=412

How can I test the running time of a method?

c.What is the running time of your method smallest, as a function of n, the number of elements in the list? Use big-Oh notation.
I quoated from a java problem..
Anyone can tell me how I can test the running time? Thanks ! :D

it depends on what is in the method. For example a for loop executed n times would have a O(n). A double for loop (each loopp run n times) will have O(n^2). Do this: determine how many times each loop in the method is run. This is the first term in your runtime equation. Do this for all other loops in the method and add them all together. Most other statements that are not iterative should have a constant runtime so O(1). For conditional statements, the runtime depends on the most time consuming portion of the statement. Once all these are added together, take the O(equation) which should just leave the biggest term. i.e. O(5n^2+3n+8) = O(n^2). Hope this helps.
note: this does not apply to recursive methods

How to display the elapsed time of a video (event video) in Captivate 6

I have a Captivate 6 project which includes two separate videos and I am wondering how I can display an elapsed time for the videos - preferably one that stops if the individual stops the video.

Hello and welcome to the forum,
Are you talking about an inserted video, or about the Captivate file itself? I'm asking this because a lot of users refer to a published CP-file as a video.
'Elapsed time': is this the real time spent by the user, or the time as you can see in the TOC (developer's time)? I blogged once about the difference.
Lilybiri

[Urgent!!]How to control the running time??

Hi,
I'm an undergraduate researcher in the University of Michigan. I used NI labVIEW FPGA on my current project and now i meet a problem.
I have a labview code that has runs with 3 subroutines. they execute one after another for a given time period for each iteration of the entire code. that is i built them in a flat sequence structure inside a large while loop and each of the subroutine is a while loop with several subvi's in it. not that complicated but i have to specify how long each subroutine runs. now i have a problem to set that execution time. i don't know exactly what kind of timing function i shall use. i tried the "Elapsed time" function but that only works for the first iteration. from the second iteration on each subroutine only runs for once, instead of continuing to run until the given time elapsed. so i don't know how to correctly control the running time. It's reallly urgent, so could you please give me some suggestions about it? Thanks a million!!
Xiaofei

Thank you for your suggestion!
sorry but that this method won't help because my code is sort of difficult to put into a for loop .
the logic is like this: first the output is set to 0 for a user-defined amount of time (means no excitation). secondly it gets excitation and gets output but no data saving is allowed for a user-defined amount of time. at the same time, one paramater is automatically changed. (the reason for not saving data is that there is a transient response when the parameter changes). thirdly, data saving begins with the same
parameters as before, also for a user-defined amount of time. and then after these three steps one iteration is done. for iterations there is a different parameter, the user defines the range of the parameter and the number of different values in between and the code will do the increment at equal intervals automatically. my problem now is that i don't know how to correctly control the time. i have tried various ways but no one works.
the second problem is that i don't know how to let it run and not saving data and then saving data without changing everything else. what i have now is to call the same VI twice, once for only running and no data saving and the other for saving data. but then the problem is that in between these two routines, the output suddenly becomes zero and gets excited again after i call it. My professor said that i cannot let the output become zero, otherwise there is no meaning in waiting for the excitation to become stablee. but then i don't know how to call a VI only once and let it do the saving for only the latter part of the running time. i have been working on this thing for two weeks now and still have no idea....Sorry the problem is long and tedious, but if anyone have any idea about it, please let me know, i will be most grateful. Thanks a million!!!

Display mp3 running time?

Hi - Is there a way to embed an mp3 (Quicktime by default) and get it to display the running time with a count-up timer?
Users of my site need to be able to reference particular parts of my audio file - e.g. "Go to 0:45".
Thanks...

Welcome to the Apple Discussions. You'll have to use a flash player that displays the running time. Roddy's iWeb for Musicians site has a number of them on the Music Players page that might serve your purposes.
Another possibility would be to open the audio file with Quicktime Player and save a s movie file. Then add the file to the server and link to it as done in this demo page: Opening Item in a New, Precisely Sized Window. That will give you exactly what you want. This method is easier to implement than a flash player unless you use the jutebox for all the audio files. However it will require visitors to have Quicktime installed on their computer.
OT
Message was edited by: Old Toad

How can I display the elapsed time of the course using Advanced Actions in Captivate?

I have a Captivate course which is approximately 35 minutes in length. On each slide I would like to display to the user, the current elapsed time.
EXAMPLE:
25/35 minutes complete
The 35 would remain static, so I have been working with the elapsed time system variable in CP: elapsed:$$cpInfoElapsedTimeMS$$
I can't seem to get the variable to properly display the elapsed time in minutes, rather than miliseconds. Attached is a screen shot of my advanced action.
Can anyone provide guidence regarding how I should structure this differntly?

I talked about that Timer widget in that blog post and pointed to another one:
http://blog.lilybiri.com/timer-widget-to-stress-your-learners
If you are on CP7, you'll have this widget also as an interaction, which means it is compatible with HTML5 output. Amd there is also an hourglass interaction, with similar functionality but... did not blog about that one
PS: Check Gallery\Widgets to find all widgets. Default path is set to Interactions

How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

Hello,
Regarding the skip/force pass/force fail options, when I set the ControlExecFlow to True in Teststand 3.1 and 3.5, in the Sequence Editor the menu options for skip/force pass/force fail are not active for Technician but, when I launch the Operator Interface logged with Technician the options are active. The problem is that if the technician sets one step to one of these options, and change the user to Operator, the test step remains skip/force pass.
Is there any possibility without modifying the Operator Interface (at programming level), to reload default values of the steps when changing the user to Operator?
Thank you,
Best regards,
paio

How do I get routing data from the Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application.

I have a tableView displaying a list of contacts from a Cloud Database. After selecting a contact, I push to a programmatically created MKMapView. Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6.
Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API. How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused. It must be possible to retrieve routes, since the Map App can display turn-by-turn directions. How can I retrieve turn-by-turn data that I may display as a route within my own application?

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

Can we load and unload the files in the run time?

Can we load and unload the files in the run time?
For example there are four files named "test1.h & test1.c" and another set "test2.h & test2.c" (I attached them as attachment to this post).
test1.h contains code:
int variable; //variable declared as integer
test1.c contains code:
variable = 1; //variable assigned a value
test1.h contains code:
char *variable; //variable declared as string
test1.c contains code:
variable = "EXAMPLE"; //variable assigned a string
So here, in this case can I dynamically load / unload the first & second group of files so that the same variable name "variable" can be used both as integer and string? And if yes, how is that to be done?
Solved!
Go to Solution.
Attachments:
test.zip ‏1 KB

What do you mean by "dynamically"?
If you want to have a variable that either is an int or a char in the same program run, I'm afraid your only option is to define it as a variant and assign from time to time the proper data type in the variant according to some condition. Next, every time you access the variable you must firstly check which data type is stored in it, next access it in the proper way.
If on the other hand your option or to have a run in which the variable is an int, next you stop the program and in a following run it is a char, you may have it by using some appropriade preprocessor clause:
#ifdef CHAR_TYPE
#include "test1.h"; // variable defined as a char
#else
#include "test2.h"; // variable defined as int
#endif
Next, every time you want to access the variable you must proceed in the same vay:
#ifdef CHAR_TYPE
variable = "string";
#else
variable = 1;
#endif
Does it worth the effort?
Additionally, keep in mind that this "dynamical" approach can work only in the IDE, where you can properly #define your CHAR_TYPE or not depending on your wishes: when you compile the program, it will have only one #include depending on the definition of the macro.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How we can display the running time as an output by writting abap report?

Similar Messages

Maybe you are looking for