How do I expand my images after using a cover flow object?

Let me explain: I used nine images to group them under cover flow (object) and it looks nice on Ibooks Author, but now I want to tap to expand each image as they float and swipe back to revert to initial size.

In short, you'll want to hook into the interaction events fired by the Cover Flow object when manipulated by the user.
Each interaction fires an event. To see the possible events, select the Cover Flow and click the code button and you'll see the events you can intercept in the "Add Event Handler" drop-down menu including:
Did Tap Front Cell
Did Select Cell
Did Focus Cell
Did Begin Swipe
Did End Swipe
Showing a zoomed version of the center (focused) cell will vary based on how you want to present the focused content.
If you want to zoom the focused cell full screen, you can have an offscreen Image View object that you'll display when the appropriate event is triggered and set the image property of the Image View to that same image in the focused Cover Flow cell.
You'll then add a interaction for the zoomed Image View that hides the view when tapped to reveal the Cover Flow for further selection.
Bunch of different ways to do this. Check out the Photo Gallery page in the Space Tours To Mars sample in the iAd Examples folder available for download where you downloaded iAd Producer.
Cheers,
-Mark

Similar Messages

How can I see how often and where an image is used in the site?

Just realized the post appeared twice as at first sending I
got an error page (contains no data...).
So, please do all answer to the other post, so that all
replies get collected at one post only.
Hello,
please excuse my maybe dumb question but converting from
GoLive I am still trying to find several practical effective
workflow features in DW ...
1. where in the sitewindow/assets or files panel can I see an
indication at each image if and how often it is used in a site?
2. and where can I see/check on which pages it is used?
Thanks in advance for guiding me there ...
bye,
Beate

> How do DW users know how often and where an image is
used on the site
> then?
I'm not sure what the benefit is of knowing how often an
image is used, but
a search for the image by filename would do the trick.
And just so you'll know, this is a peer forum, not an
official communication
vehicle to Adobe. We are all just users here, not Adobe
employees.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"beatrice" <[email protected]> wrote in
message
news:[email protected]...
> OK. I sent the below feature request.
> How do DW users know how often and where an image is
used on the site
> then?
> always doing a find/search?
> in GoLive there was an simple window where all the files
a page consisted
> of
> were listed plus all the files that were pointing to
that page. such,
> without
> having to open a page links and image and componentes
etc. could be
> changed via
> point&shoot.
>
> Couldn't you all think of this a being great and helpful
and making site
> management easy? Then send in a feature request as well,
please.
>
> ...............
> How can one know by the assets or files list if an image
is used at all on
> the
> site?
> and how many times? and on which pages?
> This is very useful to know especially in larger sites.
> e.g. an image should get changed on one page, now it
would be very good to
> see
> if when it was used on other pages as well if it would
make still sense
> there
> when changed.
> as DW can update files (when e.g. an image name gets
changed) there is a
> way
> this is already recorded. why not take this records and
send this back
> into a
> list/column in the files panel to indicated that the
image is used and
> how
> many times.
> plus to have another window that can display all the
pages the image is
> used
> in.
> so one could click through all those pages and open them
to check the
> image
> there.
> in GoLive that feature was called 'In and Out links' and
one could see a
> page
> in the middle and left and right from it many
branches/lines at which ends
> the
> filenames were visible used in that page.
> so one e.g. could also point and shoot from this list
and change a file or
> image or component simply by point and shooting to the
files panel without
> having to open the pages.
> These features were so practical for an effective daily
workflow that I
> don't
> understand why they haven't been put into cool DW yet.
Please, please do
> so in
> the next release. I can test it thoroughly if you need
testers for it.
> bye,
> beate
>

Weird blocks on image after using adjustment brush in ACR

A group of people took an online webinar yesterday. The instructor is a heavy Adjustment Brush user, in LightRoom. After taking the class, many of the students in the group are reporting the appearance of weird blocks on images, after using the Adjustment Brush - both in LR and in ACR. It is also happening to me. I am a heavy Photoshop and ACR user - never before have I seen this. The only thing I'm doing differently is using the Adjustment Brush (because of the webinar class, as it was part of the instructor's core teachings). What could be causing this?

There was an adjustment brush bug in older versions of ACR. I first reported it here, and Eric Chan acknowledged the problem. It went away in future releases. Sorry, I can't remember what version numbers were involved.
http://forums.adobe.com/thread/928672
(see youtube demo)

Clicking magnets inside of iPad Air after using Smart Cover for some time

I have read that many people experience clicking magnets inside of iPad Air after using Apple Smart Cover for some time.
I experienced the same thing and returned the device to the shop where i bought it, while still having the warranty.
They wrote me after 11 days of having my iPad that it is fixed and i can come for it, i was not yet there.
Please tell me, how can i realize that they warranty serviced my iPad?
I have read that many people get new device with same issue, and mine just got fixed somehow...
It is not Apple Store it is Apple Premium Reseller, was their service OK or they just did not wanted to give me new device?
How can i get to know they were acting correctly?
Thanks for the answer

Everything is OK, they gave my whole new iPad Air

Problem using iTune Cover Flow display

Previously iTunes "Cover Flow" allowed me to view album convers.
Now it displays: "iTunes is unable to browse album covers on this computer".
I am able to see album covers in "Album List" and "Grid" displays.
Any ideas?

After hours of frustrating experimentation, my partner appears to have found a workaround for this problem. If you have cover art not showing up at all, or showing up in the Cover Flow, but not when you turn your iPod Touch back vertically, this is what to do. If you view the info on a single file in iTunes, you'll notice the cover art sits in the middle of the screen in the Artwork view. What you need to do is create a blank 200x200 72 resolution image file (I don't think these paramaters must be exactly as noted, you just need a square, blank image file). Then add this blank image as a second image to the album that won't display its cover art. Afterward you should have the original artwork on the left half of the display and the blank part on the right. It won't work to just use the slider to get the original file to the left by sliding the slider one place to the left, because once you exit it just puts the picture back in the middle again. You have to add a blank image file. (In fact, the second image file doesn't even have to be blank, if you just want to use another album image file you have.) Once you have the artwork you want displayed fixed to the left half, everything works fine.

Can't preview images as thumbnil or cover flow

Hi everyone.
Previously i was able to view images in finder as thumbnails as well as cover flow, but yesterday i found out that that the images in finder takes the "preview" icon although although that in the finder view options the show icon preview is ticked.
Please take a look at the images
http://dl.dropbox.com/u/5217556/1.jpg
http://dl.dropbox.com/u/5217556/2.jpg
How can i get my finder back to show thumbnails of my images?

This may not fix your problem but sense no one else has offered a solution I'll try to help.
I wasn't able to recreate you problem exactly but something to try is to hold 'cmd option' then 'I' to open a small window which is similar to the 'get info' window but it's content will change to whatever folder or file you select. When the window is open select the icon in the top left corner until a blue box highlights around the image. If you don't see a blue box then there is an image there blocking the default one. You'll just need to click it a time or two and then press 'cmd x' to cut the image out. You may have another image placed over the default image which is blocking the default icon from being shown. Like I said initially, this may not be your problem but you could try it. You may have inadvertently altered the image icons.
Message was edited by: gfann18

Where does Safari save pix it uses for Cover Flow?

I am scrolling through Cover Flow in Safari 4.0 and I wanted to know where it saves the pictures I see in the previews. Is it saved in a Jpeg somewhere that I can access and view or some other format that I can't?
Thanks.

.DS_Store files only track where thing are positioned on your system; they aren't caching anything.
I would have said that too, since as far as I know Finder doesn't keep any thumbnail caches. But the fact is that the first time you open a folder full of images without built-in thumbnails in icon view it takes a noticeable amount of time for Finder to draw them, but in subsequent openings they do indeed seem to appear as quickly as if they did have thumbs. I did a bit of experimenting and deleted the .DS_Store file in such a folder, and Finder did have to redraw the thumbs when I opened the folder later, and recreated the .DS_Store file. However, the file just isn't big enough to be a thumbnail cache. I would guess it does include some sort of instruction to the Finder about thumbs, but doubt it includes any actual thumbnails.
However, in my case this speediness does NOT persist through a restart.
Francine
Francine
Schwieder

How to save appropriate images and then discard the saved images after using.

Hi,
The attached program is used for gesture recognition and playing the corresponding audio file for each recognized pattern. It is saving all the images that are captured and is using in pattern matching. if pattern for "A" is captured ,then almost 10 to 15 intermediate images are captured along with pattern "A". If all are pattern matched then audio file of "A" will be played for 4 or 5 times which is not desirable. Also the images saved in the imaq write folder are getting piled up. They should be discarded after they are used up in pattern matching otherwise it would be a waste of system memory. Can anybody advice in correcting.
Thanking you.
Attachments:
program help.zip ‏721 KB

Hi,
The attached program is used for gesture recognition and playing the corresponding audio file for each recognized pattern. It is saving all the images that are captured and is using in pattern matching. if pattern for "A" is captured ,then almost 10 to 15 intermediate images are captured along with pattern "A". If all are pattern matched then audio file of "A" will be played for 4 or 5 times which is not desirable. Also the images saved in the imaq write folder are getting piled up. They should be discarded after they are used up in pattern matching otherwise it would be a waste of system memory. Can anybody advice in correcting.
Thanking you.
Attachments:
program help.zip ‏721 KB

How can I make a image slider using Dreamweaver? Is there any image slider widget I could use?

I was browsing through the web when I saw a website which had a really cool image slider. I don't have any idea of how to develop anything similar, but I was wondering if maybe dreamweaver had any widget that has already been developed by someone else that is open source for everyone else to use. Is there anything any?

Ken is referring to a "roll your own" slider that works great. There are lots of those.
None of those are built in to Dreamweaver. None of those will give you a panel within Dreamweaver with which you can build them.
Project Seven does sell widgets that are Dreamweaver extensions.
Adobe is offering another one for free (and you get additional function if you buy it).
Extend Studio offers Power Slider (with a free trial).
And there is Nivo Slider.
These are extensions that plug in and extend what Dreamweaver can do.

How do I recover my files after using time machine restore?

Hello guys! I have been using Time Machine to back up my Macintosh HD into an external disk in August this year. Considering the limited storage of my external disk, I have excluded all of my photos and musics to be backed up. Today I got some problems of my system and started using time machine to restore my computer to the state of August. After restoring, I found all of my photos and musics and other important files which have been excluded to be backed up by time machine are missing. What a disaster. Is there any way to recover all the missing files? Or is it possible to undo today's time machine recovery? Many thanks in advance!

many thanks for your reply. But for the current matter, do you have any other great ideas for me to take back all of my missing files. I will definitely buy a lager storage disk to back up all the files. But how could I solve the current issue? I have already tried the software you mentioned in the lien, it seems no help. Thank you anyway!

How to retrieve original RAW image after cropping and opening RAW file?

Hi
I have a Canon EOS 350D camera and now have PSE 9. I have taken some RAW images & imported them into PSE 9 OK. I know the original RAW image is retained after editing. However, after cropping a RAW image in the Editor and then "Opening" and "Saving as" a PSD or JPEG, I then close the image in Editor and the cropped image appears in the Organiser. That is as it should be, I think. If I then wish to start again from scratch on the original RAW image, it seems to me that I have to manually delete the edited version and the .xmp file in Windows Explorer, and then double click the original RAW file in Windows Explorer, which then opens correctly in PSE 9 Editor. Can this be done from PSE 9?

When you open the original camera raw image, go to the flyout menu
and choose Camera Raw Defaults, that resets everything but the crop, straighten,
and rotatate settings.
To get rid of the crop and/or straighten settings, click and hold on the crop tool and choose Clear Crop.
To reset the Image rotation settings, you have manually rotate back using the image rotate buttons.
MTSTUNER

How to access Time Machine backups after using migration assistant?

Can someone please help me with a TM issue.
My HD died so I fitted a new one. I figured that I would do a clean install rather than use TM to bring across a whole bunch of 5 year old junk and Aps that all broke after the Leopard -Snow Leopard -Lion -Mountain Lion upgrades.
Installed 10.8.2 Mountain Lion, no issues. Then used TM to drag and drop all the Applications I actually wanted, still good. Then used Migration assistant to bring in the remainder of the settings, documents, mail etc. For some reason you cannot migrate to the current default user so you have to create a new user profile which I did. New profile was great so I deleted the other profile created at install that was pretty much blank.
At this stage everything looks awesome but I noticed a video clip was missing in a Final Cut project so I went back into TM to retrieve it. Now, all the documents in my old user profile in TM have a little no entry symbol on them and I do not have permission to look at those files.
It looks as though I am now being treated as someone else on a different machine and no doubt TM will continue to work from this point on but how do I tell it that there is just one user on this machine and I want access to all the historic backups too?
Any advice will be gratefully received.

Many thanks for your response Mende,
I am trying to specifically NOT do a full TM restore because I have some issues with some programs that I cannot delete. I wanted a fresh start but from what I understand the TM will bring back everything as it was, including all the corrupt system files. Fixing the TM permissions would be the preferable option.
(I attempted to make a windows partition on my system once, thinking it would make some sort of clever fake-windows desktop supported by Mac coding. It actually wanted me to do a full windows 7 install on the partition with windows install disks so I cancelled the process. Because it was a partial install I have not been able to uninstall the modifications and my system was crashing regularly due to some sort of stray code).
Just out of interest, if your OSX install is perfectly good, will TM use that or will it still take your OSX from the TM backup?
Apart from that one stray file, my system is now super clean and faster than ever... but maybe there are still some things missing that I haven't noticed yet.

How do I get clearer images after I have saved images on key note

I use Keynote for a scrapbook program as I have yet to find anything that is efficient as it. Trouble is i dont know how to set the pages so they would be 12x12 andafter I print the images out the have lost their true colour and have a blurred effect. Is there something I could do to rectify this
Many thanks people

Is there something I could do to rectify this
Definitely, use a dedicated photographic printing application.
Keynote is a fantastic video based presentation application but its not designed for high quality output to print. It can produce handouts and notes for lecturers, but as it does not have a print module dedicated to correctly scaling photographic quality image printing, it is the wrong application to use.
For viewing and printing, you would be far better off placing all the original images in individually labeled folders, then use Preview (in the Applications folder) to view and print the images.
If you want the best printing software under the sun for the Mac, get Adobe Lightroom for £60, cheaper if you buy on Ebay. It will catalogue and print all your images to any size and format.

How do I expand my Airport coverage using Airport express?

I want to expand the reach of my wifi network (i'm using Airport extreme). Can I do that using Airport Express? If yes how?

HI ldelage,
From AirPort Express frequently asked questions (FAQ):
Question: Can AirPort Express be used for a Wireless Distribution System (WDS)?
Answer: Yes. AirPort Express can be a WDS main, remote, or relay station. It can function as a WDS main whether or not you are using it as a router to share your Internet connection (NAT).
Wi-Fi base stations: Setting up and configuring a Wireless Distribution System (802.11b/g). Explains how to use the Airport Express to expand the Range of your wireless network.
The information your looking for is under "Instructions for using AirPort Utility 5.5.2 or later."
In this section, "Configuring a WDS main base station," explains how to configure your Airport Extreme so that it allows the Airport Express to extend your wireless network's range.
"Configuring a WDS relay base station," explains how to configure the Airport Express to be a relay for your Airport Extreme Base Station.
Both steps must be performed so that the express can extend the range of your wireless network.
-TT

Issue with re-importing images after using Nik plugins

Currently, when images are edited in a Nik plug-in and saved back to Aperture, the project folder the image originated in is changed from being organized by "date" to "manual" and then that image is inserted as the first image in that folder. In past versions of Aperture, the image would be placed back into the project folder by date. At the very least I would like to have the control on where that image is placed. And my selection of how that project folder is organized should NEVER change unless asked.
Is there some hidden setting that can change this behavior?
Ken

Unfortunately, this issue was with some of the last versions of Snow Leopard as well. Oh, and for clarification, this happens with HDR efex. Others have commented that the Nik plugin is designed to work this way. Maybe, but I would like a choice where the image is returned. I believe it is a NIk issue but they won't admit it.
I did try your suggestion, but no luck. This image changed the project folder organization to "manual" and put the image first.
Ken

How do I expand my images after using a cover flow object?

Similar Messages

Maybe you are looking for