How do i get FMS to listen on port 80?

Hello,
I'm working on an app that is used by a client of ours that
is in state government. Because of their security settings, they
only have port 80 open to use for connections to our application.
We have a dedicated server running FMIS 3.0, and I've configured
the fms.ini file to contain the line
ADAPTOR.HOSTPORT = :80
instead of the default of 1935. I've restarted FMS, restarted
the server, changed the connection string in my Flash client to be
of the form rtmp://<server_name>:80/<app_name> but I
just can't get the app to connect. It works fine with 1935 in our
dev and test environments, but for our live server we really need
to be able to use port 80.
If anyone can tell me how to make this work I'd really
appreciate it. Thanks in advance for any help.
Regards,
Dave

Hi Jay, thanks for the advice. We actually have FMS running
on a dedicated server, so there are no other internet services
installed or running on that machine. I wasn't in charge of the
process to establish the system architecture, but I believe that
this decision was made to avoid the HTTP conflict issue you brought
up.
No, it turns out that in this case the problem was me. This
isn't unusual, I'm sorry to admit - I sometimes fail to think a
problem through before looking for assistance. The problem was with
the Flash client, in that during development it was configured to
use port 1935 on my local dev machine which is running FMS, IIS and
MySQL. In the live environment, each of these three services (well,
Apache for web server live) is running on a separate machine. When
I compiled my client, I'd neglected to correctly identify the FMS
server in the rtmp connection string :/
So, once I paid attention to what I was doing, I was actually
able to get the result I needed. Sorry for the disturbance, I'll
try to be a bit more observant in the future (or at least, I'll try
to try). Anyway, hopefully some other folks might benefit from this
discussion, because the documentation is a bit sparse on how to
exactly configure a server to run both HTTP and FMS via port 80.
Thanks again for your help! :)

Similar Messages

  • How can I get more than one firewre port ?

    Hello,
    how can I get more than one firewire port ? I'd like to be able to connect my canon HV30 camera as well as my firewire external HD at the same time so I can use firewire to upload the videos I've taken. Is this possible?
    TIA

    Hi ginestre-
    Many FireWire hard drives have 2 firewire ports so that you can daisy-chain devices and connect the camera that way.
    Daisy-chaining is not the most reliable method, but it works, so you could buy a FireWire hub.
    Luck-
    -DP

  • Using a standard midi file, how do I get this to an output port for playing it via midi-cable on an extern keyboard?

    Using a standard midi file, how do I get this to an output port for playing it on an extern midi-keyboard?

    Hi
    Create 1 or more External Instrument tracks as required.
    You could send the MIDIFile to a track set to "All" MIDI channels, or if needed, you could split the file by channel and create indivisual tracks for each.
    CCT

  • How can I get BT to listen & sort out a problem no...

    Hi
    Been having problems since Sep 2012 when I ordered my broadband & land line package. Paid in advance for 1 years line rental to get the discount. My broadband etc. never got going. Could not find out why. Since then has been one thing after another trying to sort. BT now demanding more money from me and will not listen to me re how to sort this out and instead want to engage a debt collection company/ take me to court for something that has come about due to their own negligence/competence issues. How do I get in communication with someone who will listen, explain to me where my broadband package is and recognise the contribution of BT to this mess & help sort it out? For my endeavours - I've been past from pillar to post - Extraordinary!
    Thank you.

    Dear Stephanie
    Events thus far –
    Sep 12 – I tried to purchase the all in broadband, telephone line rental package advertised by BT at the time. After a number of attempts I achieved this and took the discount option to pay for a year’s line rental in advance. (I have the copy of the order confirmation and monies paid).
    The new router did not arrive so made numerous calls but could not establish status/why my router had not arrived or how can we sort this out.
    I sent in a complaint over the BT web site. I received a complaint ref no. Saying we will get back to you in 72 hrs. I heard no more! I then sent a separate email saying the same – what’s happening/how can we sort etc., to a member of staff @ BT I had been given to understand might help. I heard nothing. I was getting nowhere with BT who seemed at a loss to explain, despite my own endeavours to acquire the service I desired as was advertised. I was left with the purchase order confirmation and only the complaints acknowledgment as formal status – Outstanding/unresolved as far as I was concerned & had gotton lost in the myriad of departments/you need to call this number circle.
    I considered that my only option to get my own broadband & line service was to go elsewhere and proceeded to do so. We are still in the month of Sep 12.
    Oct 12 – By around 4th Oct I had my service at last albeit from another provider. It was for a similar ‘all in’ package where I again paid up front for discounted years line rental. I have itemised phone call bills from the new provider from this date.
    I was still waiting to hear from BT re my September experience but heard nothing.
    Nov 12 – Mid Nov I received a bill from BT for phone line charges for the period of 10th Nov 12 to 9th Feb 13! The letter went on to say these monies will be taken from my account on 24th November. Not being able to make sense of this, I phoned BT on 20th Nov 12 @ 3.50pm and explained the aforementioned. ‘ok, I’ll look into and come back to you’ or similar was how it was left. I got no further advice or explanation.
    Notwithstanding my call on the 20th Nov, I now understand that BT went on to collect the monies for the charges to Feb 13 only not from my account!!
    Why did this money get taken?? I still do not know despite my trying to find out and resolve.
    Dec 12 – I understand this third party who had inexplicably had this money taken went on to recall the money (understandable) via the banking indemnity scheme. Meanwhile BT (inexplicably) credited this third parties account by £52.14! Around this time I received a credit not saying my bank account will be credited by the same!
    Some of these Dec 12 goings on I have only recently established(Feb 13). Mad.....
    Feb 13 – I receive a letter from BT dated 5th Feb demanding immediate payment for the monies that were called back by the third party last Dec!
    On 6th Feb I get a letter from the Debt Recovery Unit giving me 10 days to pay these charges (line rental etc. from Nov 12 to Feb 13!) or else the full might of BT’s legal team & costs will descend upon me!
    I can’t explain what it has been like since receiving that letter and my almost infinite attempts and correspondence with BT to sort this out. I’ve been battered with the ‘we’re right/you’re wrong’ attitude with no recognition or explanation from BT as to why they took the money in the first place or why they did not supply my, still outstanding order last September.
    I have since established the BT were aware of my action to move to another provider by at least 25th Sep 12!!
    I’ve tried & tried here, well beyond the call of duty spending something like 30 man hours on this to resolve. I’m left waiting for the knock at the door from BT’s legal team.
    Yours,
    Wits end am I!

  • How do I get BT to LISTEN & RESPOND to my genuine ...

    I set up a new company with a new phone line in November with the sole aim of redirecting it to another manned line.  The setting up was oh so easy - nothing too difficult for the sales man on the line.  It was agreed a standard line, with add on redirection and only charges when redirected to mobile.  
    First month I spent loads of calls and loads of time hassling them to set up the redirection facility.
    Then I received a bill with charges for 32 redirected calls - I got about two and both to a landline.  
    I called again and again and was told eventually that I was in the system and they would get back to me within two weeks.
    Then nothing but a nasty call telling me to pay my bill or I would be cut off.
    I paid the bill and just ignored the problem hoping it would go away!  I just did not have either the time or the energy to face it all.
    The next bill has just arrived - same problem 38 redirected calls - far too many - all charged.
    I am so STRESSED about this.  It is a new company and I cannot afford either the time or the cost.
    Is there anyone at BT that I can speak to who will be able to help me rather than just push me from pillar to post?
    Solved!
    Go to Solution.

    with a new company you presumably are a business user and should post here  https://business.forums.bt.com/   as this is a residential forum
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • D5100t How do I get the digital audio rca ports to work?

    Do I need to remove sound card? Do I need to change jumper settings? I changed bios and defaulted to it but it doesnt work. Meter moving but no sound coming out. TY

    Hello milkdud,
    You’re having a problem with your sound not working.
    Here is a link that will walk you through some steps to get everything working again.
    Let me know how everything goes.

  • How do I get iTunes output through USB port ?

    How do I play iTunes through USB Port ?

    Have you updated both Airport Express units to the latest firmware?

  • How can i get the port used for https

    Hi All,
    does aynbody knows how can i get in the portal the port used for https connection, cause the link send by e-mail notification, when user has been invited in a room doesnt work...
    i tried to use the command netstat -ao and i tried use the port that i get there.. but then i get message, when click on the link: "The page cannot be displayed"
    we have following settings:
    server port: ??
    Web Protocol: https://
    Thanks for suggestions!
    Karol

    Hi Karol,
    by navigating to:
    Content Administration -> Collaboration Content -> (Room Administration -> Related Topics) -> Configure Backend Properties for Rooms
    you can change the Webprotocol to http:// and set server port to 50000 (default port).
    To see the SSL Port you can go in the Visual Administrator to Services -> "HTTP Provider Services".
    http://help.sap.com/saphelp_nw04/helpdata/en/a2/f9d7fed2adc340ab462ae159d19509/frameset.htm
    Hope this helps,
    Robert

  • Getting WLS host url and port number

    Hello Experts,
    I need to forward an authenticated request to JAAS LoginModule. How can I get wls host name and port numbe in the LoginModule?
    Thank you in advance,
    Thanks for reading my post

    Hi friends.
    I have used the last post, but it is not working.
    Mat be the API had changed.
    What class or interface could give me this data in web dynpro component?
    Too, I'm using the SAP NetWeaver Developer Studio
    Version: 2.0.16
    Build id: 200602130353
    Thank you.
    Manuel Loayza
    Living La Vida JAVA
    Edited by: Manuel  Loayza Gahona on Jul 23, 2008 6:54 PM

  • I have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?

    i have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?

    If the purchases are all from the same account then you can share the content by authorizing each device.
    If you have separate accounts then you have to be authorized to use the content purchased from another account.
    MJ

  • How can I get an album to play in order on Itunes?  The songs keep skipping all around to other albums that I did not want to listen to at that time?

    How can I get an album to play in order on Itunes?  The songs keep skipping all around to other albums that I did not want to listen to at that time?

    It sounds like you might have the shuffle button at the bottom left of the iTunes (the button with the squiggly lines).
    If that's not the case, then maybe you just need to sort your library by album by clicking the album tab at the top.
    Is your music in a playlist, or are you trying to play it from the entire library?

  • How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them

    How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them. They have a ton of books but I can only listen to them from my windows media player and I wouldlove to download to my I pod but I have tried everything I can think of it they won't go over.  Someone said all I had to do was copy them over and they would convert but I can't even get them to copy.  Thanks.

    Well it started happening AGAIN with my 2nd IPod. No matter what I did, it Itunes would NOT restore it!
    I finally installed Itunes on my hubby's PC at work and managed to get it restored there.
    Apparently, there must be some sort of compatibility issue with the windows version of Itunes and some other piece of software on my pc.
    And one more important thing! I had to follow the instructions in the other thread that talks about how to correctly uninstall itunes and quicktime, in order to completely eliminate ALL traces of my "first" ipod's existence so it wouldn't demand that I restore it.
    I think the software got "confused" and thought when I connected my 2nd ipod, that it was the 1st and that it still needed to be restored.
    Basically, this is just POORLY written and POORLY tested software!

  • How can i get the unitOfWork or the persisting object in to my listener???.

    hi,
    i have a listener class which extends SessionEventAdapter ....as shown below
    public class MyLister extends SessionEventAdapter{
    public void postCommitUnitOfWork(SessionEvent event) {
    System.out.println("POST COMMIT OF WORK");
    // How can i get the unitOfWork or the persisting object in to my listener???
    Another class makes use of this listener by adding the listener into a getEventManager() of a session ....
    public final class AetbProcessStatusClient {
    public static final void main(String[] args)
    {  Project project =   
    XMLProjectReader.read("META- INF/AetbProcessStatus.xml",
    Thread.currentThread().getContextClassLoader());
    DatabaseSession session = project.createDatabaseSession();
    MyLister myListener = new MyLister();
    session.getEventManager().addListener(myListener);
    session.login();
    UnitOfWork uow = session.acquireUnitOfWork();
    uow = session.acquireUnitOfWork();
    Vector vec =
    (Vector)uow.executeQuery("SQFunctionIdProcessStatus", AetbProcessStatus.class);
    AetbProcessStatus processStatus = new AetbProcessStatus();
    processStatus = (AetbProcessStatus)vec.get(0);
    processStatus.setRunStat('E');
    processStatus.setProgramSeqNo(10);
    uow.commit();
    now my question --> How can i get the unitOfWork or the persisting object in to my listener???....
    ie the object "processStatus" into my listener

    The SessionEvent's session (getSession()), should be the UnitOfWork. You can access the UnitOfWork or UnitOfWorkImpl methods to access the objects in the unit of work. getUnitOfWorkChangeSet() will return the changes made in the UnitOfWork.
    -- James : http://www.eclipselink.org

  • When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

    When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • I have a 2009 A6 with a 5th Gen. iPod. I mostly listen to audio bks, not a lot of music. Often, the MMI starts on the first song on my iPod, therefore I don't know where I stopped in my 4-6 hr book.  How can I get MMI to start where I left off?

    I have a 2009 A6 with a 5th Gen. iPod pluggedinto the MMI.  I mostly  listen to audio books, not a lot ofmusic.  The books are 4-6 hours long, vs 4-6minutes with a song.  Often, but not always, when I start my A6, the MMI starts on the first song on my iPod, thereforeI don't know where I stopped in my 4-6 hour book.  How can I get the interface to stay stopped where I left off?  I have gone into iTunes and placed my current book as the first "song" on my iPod for ease of finding it, but often the MMI starts it over at the beginning.  Thank you if anyone has any experience with this.  My dealer in San Rafael, CA says they've never heard of this issue. 

    I think my iPod, which is an iPod touch 3rd generation , which is a lot different from a nano, which really makes it almost impossible for me to help you, which is why I suggested that you post your question in the iPod nano community.  Your first post says that your product is an iPod nano. I think the people who answer those questions would be most likely to help you. If yours isn't a nano then you can pick the right community from here. This community is really to answer questions about this forum, or issues that don't fit anywhere else.
    laverne's mom
    Message was edited by: laverne's mom

Maybe you are looking for