How do I get IC KT3170 or MT8870(DTMF Receiver) in multisim 11?

I am making a mini-project of Teleremote control. But I am not getting IC KT3170 or MT8870(DTMF Receiver) in multisim 11.
Someone please help me out........
Solved!
Go to Solution.

abcd18121991,
I don't believe it will be practical or likely to get a SPICE model for either of these components (unless you'd like to try to make a very rudimentary model based on the functional diagram provided in the datasheet). See below:
http://zone.ni.com/devzone/cda/epd/p/id/6363
However if you are looking to build up a symbol and map this to a footprint, this is relatively easy.
See this document:
https://decibel.ni.com/content/groups/circuit/blog/2011/04/06/component-creation-101
or this:
http://zone.ni.com/devzone/cda/tut/p/id/3173
Regards,
Pat Noonan

Similar Messages

How do I get Apple TV to work with my receiver?

I have a new home theater. If I plug in my AppleTV to my TV, it works but the sound comes out of the TV. If I plug AppleTV into an HDMI port on my receiver, the TV doesn't know it exists. I want it to come out of my sound system thru my receiver. How do I get this working?

Welcome to the Apple Community.
Try adjusting the dolby digital setting.

How do I get an email with attachments. I receive the email with the picture open and I don't want it opened

How do I get an email to come to my Ipad 2 as an attachment. The pictures I receive are open when I receive them.

Who's sending the pictures? If they are sent embedded in the email, then they come opened. If they are sent as an attachement, they should come as a downloadable attachement. Depends on how it is sent to you.

How do I get my iMessages sent from my mac received to my mac only, not my phone?

I'm messaging my friend from imessage on my macbook, but instead of getting her replies to my macbook, they are sent to my phone. I've already tried checking and unchecking my phone number, but it doesn't seem to help. Is there a way I can disconnect my imessages on my macbook from my imessages on my phone? I want my imessages from my macbook only sent to my macbook. How can i keep my replies from my imessage on my macbook, on my macbook?

Uncheck your phone number on the computer, then exit messages and re-open.
Uncheck everything except your phone number on your phone, restart the phone.

How can i get message id as file name in Receiver Mail Adapter

Hi All,
We are working on file to mail scenario. Client requirement is " Attached file name should be the message id" How can we achieve this.
Thanks & Regards,
Purshothamm

Hi,
To have the file name as message id, I think the below blogs can help you
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
Regards,
Vijay N

How Do I Get the Use the New Schematic Capture in NI Multisim 11.0?

Hello Multisim Users!
If you have begun the transition to NI Multisim 11.0, I wanted to provide you with some resources that will definitely help in understanding the benefits of these new features, as well as how (and when) to use them.
The new schematic capture net system in NI Multisim provides a number of benefits to the user. Most notably engineers, can now take advantage of an up-to-date and intuitive circuit design environment. As a part of the complete re-architecture to our schematic capture environment in Multisim 11, users can now place a host of different connectors to symbolize the virtual connections in their designs.
Check out to use these new connectors with this brand new DevZone article (with embedded video): http://zone.ni.com/devzone/cda/tut/p/id/11219
Also available for those transitioning to NI Multisim 11.0, we have created a special FAQ (or KnowledgeBase article) which will demonstrate exactly what to expect from this experience: http://digital.ni.com/public.nsf/allkb/AD965CF4EA0F0FD2862576F5006BCB60
Thanks Greatly! We look forward to hearing your feedback on these new tools.
Best Regards,
Bhavesh Mistry
Product Manager
National Instruments

Hi everyone,
Fernando (aka Fernando_D) fixed this yesterday. Thank you for bringing this into our attention. I hope this works for everyone now!
Have a great weekend!
Yi
Software Developer
National Instruments - Electronics Workbench Group

When I had my old blackberry connected to my computer, all incoming emails were routed to my outlook so I did not get mails on my blackberry. How do I get it so my iphone4 does not receive emails when connected to my computer?

I am getting my iphone inbox bombarded so would like it to not receive emails when connected to my computer. My old blackberry had an app that took care of this which worked really well. Am wondering if I can do the same with my iphone4.

Blackberries were/are able to do that with some types of e-mail accounts because the mail is routed to an intermediary (BlackBerry Service).
There is no equivalent for the iPhone as the phone communicates directly with the mail servers and does not go through a 3rd party.

HT1338 i hav hade my itunes account locked how do i get it unlocked also i can't receive emails because of this ?

i put my password for itunes then i was locked out it also closed my email acount can any one help me to remady this problem and get on itunes again pleas??

Contact iTunes support and ask them to keep the 17c.
http://www.apple.com/support/itunes/contact/

HT1430 How do I get my inbox working again, I cannot receive outlook mail from my server after I updated last with ios6.1 even if I reinstall the settings correct

My Iphone 4 with io6.1 will not receive emails only send, I always had no problems before io6.1. I reinstalled the settings of the email account and did everything but still will not work, it says it is downloading messages, but the white dot on the bottom of the screen stays in place and does not run accross.

Try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

TS1424 I'm being charged twice for the same order. Playtika coin purchases are a problem on Ipod. How do I get a credit for the coins I did not get?

Did anyone else have problems with in App purchases from an IPod? I get charged twice for the same order... How do I get a credit for the coins not received?

Try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

TS3989 My 5th gen ipod touch was stolen. I removed the device from my iTunes account, but their pictures still show up on the photostream on the one I purchased to replace it. How do I get this to stop, the cops have no interest in their faces, nor do I

My 5th gen iPod touh was stolen a month ago. I immediately removed that device from my account and yet today I looked at my photostream and there are tons of pics of these people on my photostream. How do I get this to stop?!?

Change your iCloud ID password: http://support.apple.com/kb/HT5624. After doing so, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.

How do I get more text options in photoshop??

How do I get more text options in Photoshop? I have the basic package, but I would like more script options.
Thank you,
Maureen

I don't suppose you have a full CC subscription? It comes with a feature called Typekit which I love. Along with an ever increasing range of top quality fonts, it has the best font manager I have used, and excellent search facility.
The web is full of additional font sites like dafont
http://www.dafont.com/
Otherweise, Google is your friend
If you want Text Effects then Google will help you out there as well

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

How do I get IC KT3170 or MT8870(DTM​F Receiver) in multisim 11?

Similar Messages

Maybe you are looking for

How do I get IC KT3170 or MT8870(DTMF Receiver) in multisim 11?