How do I get Meas. Studio controls to follow tab order?

All of the standard MFC controls follow tab order but the NI controls do not. In particular I am usingg the CNi NumEdit controls. Once the user selects the control it is stuck in the control until they use the mouse to click in the next control.

I am having this problem as well. I'm using visual C++ with windows 2000. My tab order works fine if I take out the NI number edits and replace them with standard Visual C++ edit boxes. However, when the NI number edits are in my program, they act like a black hole for the cursor. The only way to get out of one is by using the mouse. This is a problem because the technicians using my software don't use a mouse. I'm tempted to use standard VC++ edit boxes and convert the text to floating point decimal myself. Can anyone shed some light on this situation? I've checked the sample code, it doesn't seem to work either. Maybe its a windows 2000 bug?

Similar Messages

How I can get the Billing Type for the sales order and its items

How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?

Hi,
You need to use two tables.
First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
Then use the billing document numbers in table VBRK, where in you can get the billing document type.
Regards,

How can i get the maximum salary first in the order of ascending

Hi,
How can i get the maximum salary first in the order of ascending.
I need the sql query.
my output should like:
Emp_Name Salary
A 5000
SS 100
AA 300
DD 700
WW 2000
Thanks,
MuthyaM.

Here is an example :
SQL> with mytable as
2 ( select 'aa' as col1, 300 col2 from dual union all
3    select 'ss' as col1, 100 col2 from dual union all
4    select 'a' as col1, 5000 col2 from dual union all
5    select 'dd' as col1, 700 col2 from dual union all
6    select 'ww' as col1, 2000 col2 from dual )
7 select col1, col2
8 from   mytable
9 order by decode(row_number() over (order by col2 desc),1,0,1),col2;
CO       COL2
a        5000
ss        100
aa        300
dd        700
ww       2000
SQL>Nicolas.

How do i get icloud to show the open tabs on my phone on my safari?

How do i get icloud to show the open tabs on my phone on my safari?

*the open tabs on safari on my iphone 4 to show up on my safari in the icloud icon?

How do I get my camera roll back following iOS 8 upgrade?

how do I get my camera roll back following iOS 8 upgrade?

Then Apple should tell owners about this before the upgrade, so we know what to do. This is very typical of Apple, who assume owners are geniuses and can get themselves out this kind of issue. You say I should be importing pics to my Mac, why should I? I import the pics I want for the longer time and don't import others that I want to keep on my iPhone. What I don't expect is for an upgrade to delete stuff without a clear warning. I will be taking this up with Apple. I remain pretty fed-up.

IOS 5 sorts photos randomly. How do I get back to viewing them in chronological order?

iOS 5 sorts photos randomly. How do I get back to viewing them in chronological order?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

ASCP: How do I get the list of 1st level planned orders using msc_full_pegging table

How do I get the list of 1st level planned orders using msc_full_pegging table, is any one having the script.

Do you mean supply_type? If so, yes it will be in pegging table as supply_type or otherwise you can join this table with msc_supplies by joining transaction_id column and get the order_type from that which will be the supply type.
Thanks,
Abhishek Sharma
P.S:- Try opening the discussion in a separate window and see if you get the option to mark it correct or helpful,

[SOLVED] how do i get laptop volume control to function?

On my toshiba laptop, my sound "works" however the rotary volume control at front of the laptop does not affect the volume. When I turn it the volume bar appears on the display but nothing happens. This used to work but I have been "playing" with my arch system to try and gain knowledge of arch et.al and now I have broke something and cannot remember how to revert back.
I am running kdemod(4.2). SystemSettings->Multimedia shows four "cards":
HDA Intel ALC268 (analog)
HDA Intel ALC268 (digital)
Esound (ESD)
HDA Intel ALC268 (IEC958 (S/PDIF) Digital Audio Output)
p.s. I can only get sound of the Analog device. The "test" button doesnt do anything with the other devices selected.
Soundchip reported by "lspci":
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Soundmodules reported by "hwdetect --show-sound":
SOUND : snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore
modprobe.conf:
# /etc/modprobe.conf (for v2.6 kernels)
options i915 modeset=1
alias net-pf-10 off
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_GB.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(mii r8169 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="daz"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#eth0="dhcp"
# Wireless: See network profiles below
#eth0="dhcp"
#INTERFACES=(eth0)
wlan0="wlan0 192.168.0.10 netmask 255.255.255.0"
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(preload hal @cpufreq @networkmanager @kdm)
would really appreciate if someone could get my volume control working.
Last edited by keratos (2009-05-04 12:33:57)

Wilco wrote:Edit: misread your post..., anyway you need to set the main volume control to the one that produces sound, in your case analog.
eh ?? how is a volume control 'set' to the analog card?
Last edited by keratos (2009-05-04 08:10:52)

How do I get capslock, shift, control, option, and command to work normal?

I did a clean install of Snow Leopard onto a new hard drive and restored the rest of my machine from a Time Machine backup.
The behavior of capslock, shift, control, option, and command have changed and are freaking driving me nuts.
Every time I hit shift/control/option/command an image of the key flashes up on the top right of my screen. I want this to stop and go back to a normal keyboard.
Also, the caps lock is no longer doing sane basic behavior like "Tap once for on, then again for off" like every other 3 billion keyboards on the planet. Now its doing this insane thing where I have to double tap it to turn it on, then again to turn it off, but sometimes it doesn't go off.
How do I get the keyboard in 10.6 to just simply act normal again?

Sounds as if you have Sticky keys turned on.
Turn of via System Prefs > Universal access > Keyboard
You can also press the shift key 5 times to turn Sticky Keys on or off.
Check the rest in System Prefs > Keyboard > Keyboard > Modifier keys.
S.

How can I get the table control up arrow or down arrow SCROLL OK_CODE?

Dear All,
I want get the table control up or down Scroll OK_CODE (not button, is arrow click), But I debugged have not found when I click the up or down scroll.
Please give me some help.
Thanks

Hi Sun,
PBO..
 Loop with control T1.
 module get_Looplines.
 Endloop.
 Module get_looplines.
 Looplines = sy-loopc. "<< by using this you can get the scroll bar...
 Endmodule.
if you wan the ok_code for scroll bar in table control...
the ok_code is not generated for scroll bar..
but if you do not clear the ok_code in PBO it will carries the ok_code when ever you press scroll bar up and down...same ok_code is repeated..
Regards,
Prabhudas

How do I get my drop down lists in alphabetical order?

Got a new computer and installed Firefox 3.6.10. I moved over my bookmarks, etc. from the old computer. However, all of my drop-down lists are not in alphabetical order any more. And if I use one of the entries, it will sometimes move to a different order than it had been when I clicked on it. How do I get them back in alphabetical order?

The entries for form field are in current Firefox version is the order that you add them and not ordered alphabetically. 
Maybe an extension like Autofill Forms can sort them.
I'm not using it, so you need to check that yourself.
Autofill Forms: https://addons.mozilla.org/firefox/addon/4775
See also http://forums.mozillazine.org/viewtopic.php?f=38&t=790815&p=8823995#p8823995

One of my app tabs for some reason opened in a new window; how do I get it back w/other app tabs on original window?

I have 5 frequently-used websites on app tabs on my Firefox browser window. I've had these since I first saw the update about app tabs, and I have never before had a problem with it.
Today, I was working in one tab, and realized I needed to check something on the website at another app tab. I have done that sort of thing many times. But for some reason today, when I clicked on that other app tab, there seemed to be a long wait like it was working hard to make the switch, then suddenly a new Mozilla Firefox window opened with the only tab being the "another app tab" that I had clicked on.
That particular app tab is now missing from my original browser window.
I must've clicked something by accident or hit another key while I was clicking with the mouse on the app tab that I wanted to look at. I have no idea why it opened in its own window and disappeared from my app tabs on the original window.
How do I get that app tab back with the others on the original browser window? Is there any way other than simply starting over and re-pinning that site as an app tab?
If I have to re-pin it on the original window, is there a way to make that app tab the 1st in sequence the way it was before it opened in its own window? It is my most-commonly-used app tab, so I'd really like it to be the first in line, so to speak.
Thanks.
~KathrynI

Make sure that you do not drag a tab in the browser window. 
Firefox 3.5 versions and later have a feature called tear-off tabs. 
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window. 
You can drag that tab back to the tab bar in the original window to undo that detaching. 
bug489729 (Disable detach and tear off tab):
*https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

How can you get your music to download in numerical order?

How do you get music to download in numerical order?

Make sure the files are properly tagged in iTunes with the correct track numbering. You can check the track numbering by right->clicking on a track and choosing Get Info. Then in the GI window, click the Info tab.
B-rock

I,m using Firefox 7.0.1. I upgraded AVG to 2012.0.1831 Now when I open a new tab it opens to "AVG secure search" How do I get Firefox to open a new tab to a blank page?

I'm running Firefox 7.0.1 on Windows 7
I upgraded AVG to 2012.0.1831
Now when I open a new tab it opens to the AVG secure search page
This is not a problem but it irritates me
How do I get a new tab to open to a blank page?

You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

How do I get Itunes to play an album in order if some of the songs are duets? For example, if I'm playing an album by "John Doe" and track

How do I get stupid Itunes to play an album in order if some of the songs are duets? For example, if I'm playing an album by "John Doe" and track #3 is a duet w/ "Jane Doe", it treats it as a separate album! What can I do

Hi
All my tracks are MP3.
In List View, I do not have an Album column I have an Album by Artist column. If I click on this column the albums look right in the playlist on the screen but when I burn to the CD the tracks are not in one folder per album instead they seem to be in folders per Artist then Album, which as one of the albums is a compilation has created about 30 folders.
If I switch on the 'Sort by Album' column it burns the disc as I expected.

How do I get Meas. Studio controls to follow tab order?

Similar Messages

Maybe you are looking for