How do i get music into my itunes from my husbands itunes

If anyone knows how to transfer music from one itunes to another please let me know
my husband and i both have ipods each with itunes on the same computer
how can i pick the songs i want off of his and put them into mine????????

Welcome, Nicole, to the Apple Discussions!
The music you want to share has to be in "a publicly accessible location".
What's that?
Have a look at:
http://docs.info.apple.com/article.html?artnum=93195
Any further questions, post back.

Similar Messages

How do I get music into my library from my ipod

Everything was going fine with my ipod until I had to wipe my hard drive a few weeks ago.
I set my ipod so that it wouldn't sync automatically anymore so I wouldn't lose the songs on it but now I can't get the music from my ipod into the library on itunes that I just downloaded.
So now I can't do anything with my ipod but listen to the songs that are on it. I can't even get songs I don't like anymore off of it.
Help!!!

this is an option
http://docs.info.apple.com/article.html?artnum=300173
or
you can download third party software that will allow you to take the information on your ipod and trasfer it back on to your computer.. you can find these programs at www.versiontracker.com
a few that are free for windows are iPod->Folder 1.2 or YamiPod - 1.0.1
if you use a mac I suggest senuti
all of these can be found on www.versiontracker.com
good luck

How do i get music on that i have put on itunes off a cd on to my iphone 3gs with ios 5.1?

how do i get music on that i have put on itunes off a cd on to my iphone 3gs with ios 5.1?

Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Commercial software utilities for transferring songs from i-device to Mac:
Senuti - http://www.fadingred.com/senuti/
Phoneview - http://www.ecamm.com/mac/phoneview/
MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows

How do you sync music into your library from another file

how do you sync music into your library from another file? After moving all my music into a new location, is there a quicker way to upload the music into the library rather than adding file by file?

Hi MonicaJani,
Thanks for using Apple Support Communities. You can also add folders of media as described here:
Adding music and other content to iTunes
http://support.apple.com/kb/ht1473
Adding content on your computer to iTunes
iTunes helps you add digital audio and video files on your computer directly to your iTunes library. You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats. You can also add video content in QuickTime or MPEG-4 format to iTunes. To learn how to add these files to iTunes follow the steps below.
Open iTunes
From the File menu, choose one of the following choices:
MacAdd to Library
Windows
Add File to Library
Add Folder to Library
Navigate to and select the file or folder that you want to add
If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
Cheers,
- Ari

How do I get my just made movie from iMac to iTunes?

How do I get my just made movie from iMac to iTunes?

Hello MWWWB,
Unlike iPhoto, Photoshop is only an editor. It does not store or organize images. In iPhoto preferences, you can choose Photoshop as an editor. You will then get a choice when you double click on an iPhoto thumbnail to use iPhoto or Photoshop to make edits. But Photoshop does not have a library to store images like iPhoto.
You may want to use Adobe Bridge or Lightroom to help name and organize your pictures. You can Export your iPhoto Library to a folder and manage the exported images there.
Personally, I hate the arcane manner iPhoto stores and organizes images. I use it only for photos from my iPhone.

How to get music into iPod library other than with iTunes?

I am using an iPhone video editing app and want to add music to the clips. The option presented is to "add music from iPod library. I am presently traveling abroad and do not have my MacBook to sync music into my iPhone. There is tons of free music available online but the question is how to get any of it into my iPod library. I've tried a third party "download" app but it stores music inside the app, not in the iPod library. Are the only ways to put music in my iPod library either 1) sync from my MacBook or 2) buy from iTunes store? or are there other options?
Thanks much.

The Jazz website you showed had Real audio files, and these won't be able to be played in the iPod app anyway.
But there are options for websites with mp3s.
There are apps that can play mp3s and make playlists, and some that can download music from legit websites and then play it.
Do a search for "mp3 play download" in the itunes store.
I have never needed one, but there are a few there that seem to offer what you are asking.
Theuy won't add the music to the ipod app, but they play themselves so that might be what you are looking for.

How do i get music into my libary that is only on my ipod

I have music on my ipod that i have lost on CD and all in other forms.
How do i get this music back out of my Ipod and into my itunes. I cant seam to open it just as a drive through my computer to do it that way.
Any ideas i just dont want to lose it all

See Recover your iTunes library from your iPod or iOS device.
tt2

How do i get music into my Icloud music library?

I have iTunes match and I was creating a new playlist. I tried to add an album we a message appeared saying " Icloud playlist can only contain songs from your Icloud music library." How do I get that album in my Icloud music library and accessible in an Icloud playlist?

Hi,
Make sure that your iTunes library on your computer has added the tracks to match. Add icloud status to song view, this will tell you if they have been matched or uploaded. Your playlist should not include ineligible items such as PDFs
JIm

How do i get music i didnt buy from itune and take then off my old ipod touch and put them on my new ipod touch, how do i get music i didnt buy from itune and take then off my old ipod touch and put them on my new ipod touch

i have an ipod touch and i got a new one now how do i get my music that i didnt buy from itunes from my old ipod to my new one

You need a third-party program like one of those discussed here:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

How do I get sound into the computer from my webcam?

Hello,
I have a mac pro intel 8-core and need to use webcam with skype. The thing is, there is no build in mic on the 8-core and there is no mini audio input jack so how do I get the sound in from a webcam?
In fact, are there webcams available that have the built-in mic sending the signal through USB or firewire? The only webcams I found had a mic with a mini-audio plug for plugging into the computer. But of course, there is no jack to plug it into.
Besides using a firewire camcorder, is there anyway to get sound in from a webcam?
Thanks so much,
Kirk

Hi
I'm using Skype with a Logitech Pro 9000 camera with built in Mic.
I didn't need special drivers, it worked as soon as it was connected. It was configured in -
System Preferences - Sound - Input - then select Logitech Camera, USB and you are done.
Regards, Ian Macdonald

How do I get music that I imported from a cd, from my MacBook to my iphone

Please help! With purchased music, sure, it all shows up and I can listen to it or download it from the cloud, on to my iphone, but last night I imported a cd on to my MacBook. I tried what I did in the old days, dragging the new songs over to the iphone, but the message came up thst I couldn't because of iTunes Match. I am so confused. Please help!

With iTunes Match enabled on an iOS device traditional syncing of music via USB is disabled. All music management takes place directly on the iOS device.
When you add new music to an iTunes library that has iTunes Match enabled, that music will be scanned for matching or uploading and will then shortly show up on the iOS device. Is iTM enabled in iTunes?

How do I get music onto my ipod with the new itunes?

I have a new ipod, and the new itunes. I cant find any itunes version information, but it downloaded on the 27/9/13
The old itunes showed your library and ipod icons on the left, and I could simply drag music onto the ipod icon.
With the new itunes, there is no ipod icon to drag music too. I certainly dont want to put all my music onto ipod, or have it pick songs randomly. I have way too much music for itunes, I basically drag some albums to itunes, copy them to the ipod, then delete them from itunes. I have to do this for 2 reasons, one is that my music is spread over various places, and usually when you plug in an external drive it gives it a different letter, so you "lose" music, and secondly because much of my music doesnt have correct tags because I ripped it from my CDs before there was internet databases (yes I’m old).
Any ideas how I get an album from a HD onto my ipod?
Does anyone else find itunes inexplicably unintuitive?

Hi hobbss,
It sounds like you may want to show the sidebar in iTunes. You can access it again by following this:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Show Sidebar - Choose View > Show Sidebar (this feature will display iTunes features on the left side of the application including Library, Store, Shared, Genius, and Playlists).
Also, here is an article with information on how to sync media to your iPod:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/ht1351
Cheers,
- Ari

How Do I Get Music into One Grouping?

On my iTunes I have a lot of music. I also have a lot of groupings for one artist. I have two little boxes for Selena Gomez and the Scene under the Artists tab and a bunch of TobyMac. I have found that it makes one more little box for every song that has someone new features in it. With TobyMac's new album I had like, 5 little boxes for his name. I tried putting Feat. Blank in the comments box to see if it would put them all in one box but it only put them in two. What can I do> I have tried evrything.

Hey livvie44445,
Thanks for the follow up. The following resource provides information relating to your second question:
iTunes 11 for Mac: Edit song and CD information
http://support.apple.com/kb/PH12160
- Group songs that are part of a compilation together in your library by clicking the Info button and selecting the “Part of a compilation” checkbox.
- Identify the individual artists on a tribute album in the Artist field, and type “various” in the Album Artist field.
Thanks,
Matt M.

How do I download music onto my Iphone from someone elses itune/ pc?connect to another person

What is the safest/ easiest way to share music from gf's laptop iTunes onto my iPhone?

See this troubleshooting article:
http://support.apple.com/kb/TS1591

How do I get values into a vi from a subvi while the subvi is still running within the vi?

Hello
This is my problem. I have a subvi that runs an experiment. At different point in the experiment different instruments are on or off and I have a boolean array display this info. It is updated at various points of the experiment via a local variable. That works fine. Here is the problem though. I run that subvi from a main vi program (that runs it several times for several experiment cycles). I would like to pass the status of that array onto the mainvi to display there too. The problem is that the array in the main vi is not updated until the subvi is done running and thus displays only the array status at end of experiment (instead of changing
as the status changes within the subvi). I tried using a global variable to write to it in the subvi every time there is an update, and read from it in the mainvi, but that doesn't work, it still displays just the status at the end of the subvi execution. Does anyone know how to make this work, or if there is a workaround this? Thanks.

If you have LabVIEW 6i, you can update indicators of a calling VI from
a SubVI, while the subVI is running.
In your case you need
1) an indicator on the main VI panel to display the boolean array
2) to pass a reference to that indicator to the subvi when you call it
3) to use this reference in the subVI, connect a property node to it and
write the values to be displayed to the 'value' property of this node
If you don't have version 6, you can write the values to be displayed to
a global and display this global in the main VI from within a while loop
which must run in the main VI in parallel to the running subVI.
It's more complicated, since you need a mechanism to gracefully shut
down the while loop after subVI finishes. You could do this with
another global control boolean which is not displayed but just connected
to the repeat terminal of the while loop. Don't forget to put a 'Wait' of,
say, 50...100 msec in that while loop.
-Franz
zkajan schrieb:
> Hello
> This is my problem. I have a subvi that runs an experiment. At
> different point in the experiment different instruments are on or off
> and I have a boolean array display this info. It is updated at
> various points of the experiment via a local variable. That works
> fine. Here is the problem though. I run that subvi from a main vi
> program (that runs it several times for several experiment cycles). I
> would like to pass the status of that array onto the mainvi to display
> there too. The problem is that the array in the main vi is not
> updated until the subvi is done running and thus displays only the
> array status at end of experiment (instead of changing as the status
> changes within the subvi). I tried using a global variable to write
> to it in the subvi every time there is an update, and read from it in
> the mainvi, but that doesn't work, it still displays just the status
> at the end of the subvi execution. Does anyone know how to make this
> work, or if there is a workaround this? Thanks.
Franz Josef Ahlers
Section Semiconductor Devices
Physikalisch-Technische Bundesanstalt
Bundesallee 100
D-38116 Braunschweig
phone: (+49) 531 592 2410
fax: (+49) 531 592 2405

How do i get music into my itunes from my husbands itunes

Similar Messages

Maybe you are looking for