HOW do I get my Extreme base station and Express to join a Linksys network?

OK... so I have FINALLY enabled my SLINGBOX to view remotely by totally removing my Airport Extreme & Express from the network look. I was told they are both routers and I have to pick one. The Linksys network works fine for all networking purposes... what it WON'T DO is connect my USB printer or stream iTunes to remote speakers. NOW, I have been told by using the Extreme & Express in "client mode" I can do this.
Basically HOW do I get my Extreme base station and Express to join the exsiting Linksys network?

Sorry but the AirPort Extreme base station (AEBS) does NOT have a client mode.
The AirPort Express (AX) does have a client mode. The directions are in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Similar Messages

Airport extreme base station and expresses

Does anyone know how many airport expresses can work off of one base station? I have a airport extreme base station 802n about 2 years old. I currentoy have two expresses linked and would liek to add a third.
Also, is there any value in buying a current model base station --- in terms of wifi capability? It seems our movie download performance has signeificantly slowed in the last year as we hae more devices in our home that use wifi. Thanks

You might try asking this question in the Airport forum.
Here's a link for you:
https://discussions.apple.com/community/wireless/airport

Moving between Extreme Base Station and Express Base Stations with Mac & PC

I just bought an Airport Express and connected it as an extension to my Airport Extreme Base station. All firmware has been updated as of today. I have things configured such that the Extreme is WEP but allowing for extension and the Express is working. My Macbook appears to be connecting to the Express now but it seems like I have to use the Utility to select either the Express or Extreme base station manually as opposed to having it just go to the strongest source automatically. Maybe I made an assumption that it worked like an access point. Moreover, the laptop PCs in the house are not making the jump to the Express at all. I can install the Utility on one of them and probably manually make the change but the other is a Corporate PC that is 'locked down.' And of course that is the one that I want to be able to use around the house.
Does anyone know if:
1. There is an ability to bounce between the Extreme and Express like access points on the Mac and the PC
2. Is there a way to configure a PC to use the Express or the Extreme without the Utility (i.e., if I setup the Express with a different Network name)
The key issue is that I do not have the ability to run an ethernet between the two base stations - they can only connect wirelessly.
Thanks for your help!

cosmomurphy, Welcome to the discussion area!
Do you have the AirPort Extreme base station (AEBS) configured as a WDS main and the AirPort Express (AX) as a WDS remote?
Or are they both 802.11n capable and the AEBS is configured to have the extend network feature is enabled and the AX configured to act as an extension?
In either of those cases, they are working together as one big wireless network. In that situation, any client will connect to the base station which appears to be the "best" connection for them.
There is no need to install the AirPort Utility on any device. Any device with 802.11b/g/n wireless ability can connect to the network.

Is there a known conflict between an extreme g base station and express n in a roaming network?

I have an extreme g base station connected to a cable modem, an express g connected to a linksys switch via ethernet, and an express n connected to the same switch via Ethernet. The switch is connected to the extreme g base station by Ethernet as well. They are all set up to be a roaming network with 128 bit WEP security. I made two changes to the network recently. I went from a WDS setup with the extreme g and express g, which was generally stable but slow, to the roaming setup above, and I added the express n. Now something is causing the network to loose connectivity at least once a day, requiring a restart of the extreme g. My hunch is the express n is causing problems for the older g units.
Does anyone know if this is a known problem and if there is a solution?
Thanks.

For what its worth.....
I have mixed older "b/g" and newer "n" devices in "extended" and "roaming" networks for years, and have never experienced any issues with this type of setup.
As a Community Support "regular", I can say that I cannot recall having seen the type of issue that you have described, but other users may comment with different opinions.

Airport extreme base station and express WDS?

Greetings,
Before I continue to struggle with this, I'm wondering if someone can confirm the viability of the following scenario:
N wired to AE wds'd to ABS wired to switch wired to other PCs
N = existing ethernet network
AE = Airport Express config'd thru WDS as a 'base station', though not distributing IPs etc (that is handled through N)
ABS = Airport Base Station config'd thru WDS as a 'Remote base station'
The problem is, when I connect an Airport client computer to the network (by choosing the AE) I cannot see the PCs at the end of the chain. I'm testing this connectivity through pinging.
Am I missing something? Is it possible that an AE cannot be a base station?
Many thanks in advance for any suggestions/tips!
PowerMac, Powerbook Mac OS X (10.4.7)

Thanks, Don. Yes, that link was a big help. A couple of key points for anyone else trying to do something similar:
- You can use WDS to bridge two different ethernet networks, providing that only there is only one gateway and one machine/router doling out IPs via DHCP
- Use the same network name for all APs in the WDS network
- Assign the APs IP addresses manually
- The ethernet port on an AP Express can only be used to extend a network when WDS is employed

I have a airport extreme base station and i reset it and now the wifi connection is open to everyone... so how do i get a password back on it so everyone cant use it

i have a airport extreme base station and i reset it and now the wifi connection is open to everyone... so how do i get a password back on it so everyone cant use it

Read the user guide:
http://support.apple.com/manuals/#airport

Since latest update to airport extreme im getting 10 unknown base station and time capsule items showing in airport utility as a network. when able to "forget" them they initially drop off but soon return. how do i get them deleted and stay that way

since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.

I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy.

How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
http://support.apple.com/kb/HT4145
In particular, you would want to focus on the information regarding a "Roaming Network"

I have an airport extreme base station and have no clue how to set up a private wireless network instead ton open one i have now.

I have an airport extreme base station and have no clue how to change to a pawword type network from the network i have now that is free to the neighbor hood.

Which version of the AirPort Utility are you using?

My internet works fine with my wired cable modem, but when i connect to my extreme base station and setup my wireless network the internet no longer works and my apple tv by default

my cable modem works fine, but when I hook it up to my extreme base station and run through the prompts and set up my wireless network it doesnt work and neither does my apple tv by default. I am unsure how to correct this problem. It will come up saying that I dont have an IP address when I have it set to DCHP so I dont know what the problem is.

Push the reset button on the modem and power the modem off
Power off everything else....all devices....order is not important
Wait 15-20 minutes or longer
Connect the Ethernet cable from the modem to the WAN port (circle of dots icon) on the AirPort Extreme
Power up the modem and let it run for 5 minutes by itself
Power up the AirPort Extreme and let it run for 5 minutes
Power up each other device one at a time a few minutes apart
Check the network

Airport Extreme Base Station and 2wire Modem / Router

I have Yahoo DSL with a 2wire modem / wireless router combo. I have an iMac and a MacBook both running Leopard. I can't seem to get the Back to my Mac feature to work. I'm currently running the trial version of .Mac. I'd like to get a full .Mac account but I want to be sure I can utilize the Back to my Mac feature. If I were to bridge an Airport Extreme Base Station to the 2wire would that solve my issue with Back to my Mac. Additionally I like the idea of being able to plug a printer of external hard drive into the Airport Extreme.
Any advice is greatly appreciated.

I got it to work. I purchased the Airport Extreme Base Station and took the following steps which I found here http://forums.macosxhints.com/archive/index.php/t-68141.html
First connect directly to the 2Wire with the Ethernet cable.
Instructions from 2Wire:
1. Clear the HomePortal to Factory State –can be accomplished two ways
2. Go to http://homeportal/management
3. Click on Resets
4. Click on Reset to Factory State
5. Click Continue
6. Have customer press Hardware Reset button with paperclip (HG products only and BellSouth HWs)
7. Have customer unbend a paperclip
8. Have customer insert paperclip into recess for Hardware Reset button (outlined with Red circle) on back of HomePortal.
9. Hold paper clip in for ten (10) full seconds
Next steps:
1. Go to http://homeportal/management again
2. Click on Configure under Broadband Link
3. Enter VPI 0 and VCI 35
4. Click on Disable PVC Search
5. Set Connection Type to Direct IP
6. Click Submit/Save
7. Have cu go to http://homeportal/management
8. Click on Configure Services
9. Have cu Uncheck Enable Routing
10. Click Submit
Airport configuration:
1. Open the AirPort Admin Utility and select your Base Station.
2. Click Configure and enter your password.
3. Click the Internet tab.
4. Choose PPP over Ethernet (PPPoE) from the Connect using pop-up menu.
5. If required by your ISP, enter your user name, password and service name in the appropriate fields. ( Your name and password is you full email including the @sbcglobal.net part and your email password)
6. Click Update.
7. After the base station restarts itself, quit the AirPort Admin Utility.
If that doesn’t work call apple and they should be able to help with the airport configuration.
Back to My Mac now works. Hope this helps someone else.
Message was edited by: WalrusBoy

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Vonage, AirPort Extreme Base Station, and Comcast

I just picked up an Airport Extreme Base Station, and wanted to use it to get my MacBook Pro on my home network. However, I can't get it to actually provide an network connection to the MacBook. In the Network pane of System Preferences, under the Network Status, AirPort has a yellow icon, and the following message: "AirPort is connected to the network HulkNet. AirPort has a self-assigned IP address and may not be able to connect to the Internet."
Here's my current setup:
Comcast > Cable Modem > LinkSys RTP300 > PowerMac, PC, AEBS
I have the "Distribute IP addresses" disabled on the AirPort, and the internet for the PowerMac & the PC work fine. In the network status of the RTP300, the AEBS is listed as having an IP address of it's own.
Any gurus out there that can help me figure this out? I just want to be able to access my home network from anywhere in the house!

All,
I recently posted what I believe to be a similar/identical issue. See my post here: http://discussions.apple.com/thread.jspa?threadID=1378849
I have not changed my AEBS to "Off (Bridge Mode)" yet, because everything currently 'works' but I continue to get the occasional "Double NAT" warning suggesting I switch the AEBS to bridge mode. When this happens, I lose connection to the internet and need to unplugged both the AEBS and my modem to re-establish a connection to the internet and the external HD I have connected to the AEBS.
My question for Jmiller1138, do you continue to get the "Double NAT" warning even when you changed your AEBS to "Off (Bridge Mode)"? I am hesitant to change my AEBS to bridge mode since I'm assuming I'll need to totally reconfigure my entire network (meaning both the AirPort Extremes, my wireless HP printer, and my firewalls on my PCs).
The ignoring of the warning (i.e. closing the AirPort Utility without updating the AEBS) is what triggers the need to reset my AEBS and modem. Not fun.
I guess I'll just need to bite the bullet and set the AEBS to bridge mode . . . yes?

If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?

Hi I'm from Australia.
If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?

Any specific recommendations for a standalone ADSL modem though?
Always a good idea to use the modem that your service provider supplies or recommends....often free....since you know that it will be supported in the event of connection difficulties.
I have made the mistake of choosing the "best" modem based on test reports....only to find out later that the ISP would not offer any support when I was having connection difficulties.
The ISP blamed the modem. The modem support folks blamed the ISP.

How can i get difference in base plan and actual/current plan for a project

Hi PS Experts,
How can i get difference in base plan and actual plan .
For example-
Project1 is created for 10 days (start and end date difference).
Now in between -project is extended/changed for 12 days .
What is the way to get 2 days as a difference in base plan and current plan.
Thanks
Suraj prakash

Hi Suraj,
You can follow a convention that -
(1) Forecast Start/Finish dates: Used only for Primary planning, once initial planning is done you should not change these dates.
Now, you will copy the same dates in Basic Start/Finish dates also.
(2) Basic Start/Finish dates: Whatever changes are done after the initial planning, you will make the changes only in Basic Start/Finish dates.
So, in Project Planning board, if you enable Forecast and Basic dates with different color coding, you can clearly see the variation in the Project schedule.
Hope this helps.

HOW do I get my Extreme base station and Express to join a Linksys network?

Similar Messages

Maybe you are looking for