How do I get my PHP based login page to work on my Earthlink site?

I'm new to using the server-side behavior in Dreamweaver CS4. I built and tested a PHP based login page on my localhost and it works fine, but it does not work on my Earthlink account. Tech support at EL will not help beyond a certain point.
I loaded my root folder (scc_website) to Earthlink's webdocs folder, but beyond my root folder I'm not sure what else to upload so I uploaded all the folders in htdocs to Earthlinks webdocs:
_mmServerScripts
_notes
_Connections
contrib
forbidden
restricted
scc_website
SpryAssets
xampp
Can someone please offer some advise?
Regards,
Ross H. Capaccio

By default, php suppresses error messages. If you see a blank page, you've encountered an error. During development, you need to adjust the error reporting level. I don't really do php so I'm not sure if there are other ways, but here's a site with a simple explanation.
http://www.stanford.edu/dept/its/communications/webservices/wiki/index.php/How_to_perform_ error_handling_in_PHP
David Powers or one of the other knowledgeable php developers might suggest a different method.

Similar Messages

How do I get an older version of Pages to work on Snow Leopard? (I already purchased it on App Store a while back)

I purchased Pages on the App store a while back and I can't get it any more on my computer.
I have an early 2006 MacBook Pro with Mac OS X Snow Leopard 10.6.8, which is the highest it would go to, and it isn't compatible with the new Pages version. How can I get an old version?
Thanks

Just wanted to spare you the details. I bought the app on a newer MacBook Pro a few years ago, which I no longer use. I upgraded my old MacBook Pro to Snow Leopard so that I can have the App store. So, the situation now is that I can't have a higher version of Mac OS X, and the only available versions of Pages and Numbers on the App store are ones that are compatible with 10.9 or higher. Therefore, I am trying to find a way to access older versions that I can use...

How to get rid of the Login page in Portal?

Hi Guys,
I have a newly developed intranet portal project for my company which does not need login no more. I hope you can help me how to get rid of the login page in portal which is I know in every application you create, there should be a login. Is this possible that I can just simply type in to the URL address bar my application then it will no longer ask for any logins? Please help! Many thanks!
Russel

Hi Russel,
You can give public access to pages, applications etc. Users won't need to supply a username/password then, while you still can hide some of the pages to authorized people.
Check the access tab for pages and the manage tab for applications.

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

How can I get a flash based plugin to load in CC 10.x

Hello
How can i get a flash based creative suite plugin to load in Indesign CC 10.x?
I can get It to load in CC, but not In CC 10.x. Im using Flashbuilder 4.5. Do I need a newer version of flash builder/extension builder?
Best regards
/ Pontus

Yes, you can!
You need to make sure that you are using: "Adobe CSAW Indesign" and not "Adobe CWSAW".
Also you need to hack the manifest.xml and write someting like this:
<HostList>
<Host Name="IDSN" Version="[7.0,10.9]" />
</HostList>
To get it to load in CC 14.
/ Best regards
Pontus

How can I get an earlier version of pages? My OSX 10.6.8 will not support pages 5.2

How can I get an earlier version of pages? My OSX 10.6.8 will not support pages 5.2

You don't have it already, it has been out for 5 years?
Amazon is selling the iWork '09 DVD for US$19.99. A real bargain!
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=2f9da28aad8d 3dda3cf6d2ba994e4ff6&mforum=iworktipsntrick
Peter

Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

Try Image Capture, which comes with your Mac. It should be in the Applications folder, or if not, try the Applications/Utilities folder. It should automatically find the right Epson driver for your scanner.
Also, I'm guessing you have Epson 630 rather than 360. If so, see this from Epson Website.
The latest printer and scanner drivers for this product are available from Apple's Software Update. Here's how to get them:
Do one of the following:
USB
Connect your product to your Mac using a USB cable and make sure the product is turned on.
Wireless
Connect your product to your router wirelessly and make sure the product is turned on.
Note: You'll need to use the product's control panel to establish the connection to your router.
Ethernet
Connect your product to your Mac using an Ethernet cable and make sure the product is turned on.
Select the menu on your Mac, then Software Update.
Do one of the following:
If you see an update from Epson, select UPDATE to install it.
Note: Apple Software Update may find multiple updates for your system. You may choose to install all or some of the updates.If an update is not available, you're done. You already have the latest drivers from Apple.
Note: You can also use EPSON Scan if it's available for your product. To get it, go to the Epson main support page, select your product, then select Drivers & Downloads. Select Drivers, then Scanner Driver and EPSON Scan Utility.
For more information on scanning in OS X, see our Image Capture FAQ.

How to change header and footer in login page in oracle apps r12

Hi all,
how to change header and footer in login page in oracle apps r12 and login button background color, please help me
thanks
saran

how to change header and footer in login page in oracle apps r12 and login button background color, please help meTips For Personalizing The E-Business Suite R12 Login Page (MainLoginPG) [ID 741459.1]
How to Personalize Login page in R12? [ID 579917.1]
R12 Login Page: How to Personalize the Logo ? [ID 849752.1]
Thanks,
Hussein

How can I get my HP Officejet Pro 8100 to work. I had HP on the phone for over two hours and thought it was fixed. Now it just will not print at all.

How can I get my HP Officejet Pro 8100 to work.
I'm using an iMac (21.5-inch, Late 2013) running Yosemite. I spent hours on the phone with HP who did their best and thought they had solved the problem Now it has stopped printing completely. Just says 'idle' or' connecting to printer' but never does.

Greetings paulr.paulr,
Welcome to the Apple Support Communities!
I understand that you are unable to print from your Mac running Yosemite on your HP Officejet Pro 8100. I know that printer issues can be very frustrating, but I believe the information in the attached article will be able to assist you. I would suggest reading over and systematically working your way through the suggested troubleshooting steps located in the following article. If any issues arise as you work your way through the steps, or if you work your way completely to the end and reset the printing system and the issue continues, please let me know.
OS X Yosemite: Printing troubleshooting
Cheers,
Joe

How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1

How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1
Thanks

Icapper wrote:
I will end up getting something other than Logitech speakers, since I'm just weird like that.
Your not weird, your a audiophile.
https://en.wikipedia.org/wiki/Audiophile
Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
$200 and it has a iPod dock and also takes like 8 batteries so it's portable.
http://www.amazon.com/dp/B002GHBTNC
There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
The GoPlay has much better sound than the Bose, I think the Bose are overpriced.

HT4463 How do I get back to the same page I was on?

When I have finished reviewing an app, if I click the back arrow in the top left corner it takes me back to the first page of the category. Not very user friendly when there are dozens of pages to click through to get back to where you were. How do I get back to the same page I was on?

This is what I mean: The users guide gives me all these instructions. BUT, it does not give instructions to just STOP. I don't
Pause a song
Tap .
Resume playback
Tap .
Raise or lower the volume
Drag the onscreen volume slider or use the iPad volume buttons.
Restart a song or a chapter in an audiobook or podcast
Tap .
Skip to the next song or chapter in an audiobook or podcast
Tap .
Go to the previous song or chapter in an audiobook or podcast
Tap twice.
Rewind or fast-forward
Touch and hold or —the longer you hold the control, the faster the song rewinds or fast-forwards.
View album art full-size
Tap the album cover when playing a song.
I don't want to pause, resume playback, restart or any of these things. i just want to STOP. How do I do that?

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro6,1
Processor Name:    Intel Core i7
Processor Speed:    2.8 GHz
Number of Processors:    1
Total Number of Cores:    2
L2 Cache (per Core):    256 KB
L3 Cache:    4 MB
Memory:    8 GB
Processor Interconnect Speed:    4.8 GT/s
Boot ROM Version:    MBP61.0057.B0F
SMC Version (system):    1.57f18

You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

I have an iPhone 6 with IOS 8.1.3 and when I use the landscape view in Safari, the bookmark page appears and takes up one half of the screen. How can I get rid of the bookmark page so I can have the whole screen to what I am browsing?

I have an iPhone 6 with IOS 8.1.3. When I go to the landscape view in Safari, the bookmark page appears and takes up one half of the screen. How can I get rid of the bookmark page so I can use the whole screen to what I am browsing?

OOPS! Too quick on the trigger to ask that question without trying anything. Sorry. Solved it by touching the bookmark icon.

How do I get my PHP based login page to work on my Earthlink site?

Similar Messages

Maybe you are looking for