How do I get the icloud to use my iture ID

I have downloaded the icluod on both my windows vista and my windows 7. but when I go to log on it says that the id is valed but not for the cloud, and if I change the id I still get the same thing.

This is how you create an Apple ID http://support.apple.com/kb/HT2731
This has FAQs for setting up iCloud. http://support.apple.com/kb/HT4436

Similar Messages

  • How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's Imac?  I have a list of his passwords, but nothing works!

    How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's iMac?  I have a list of his passwords, but nothing works!  I know his email, but that account has been cancelled for security purposes, so we can't just request a new one.  I tried his security questions to no avail.
    Thanks

    Since that password is tied to his Apple ID, you will need to contact Apple; as far as I know, it will be a somewhat lengthy procedure and you will  need to furnish necessary paperwork (including a death certificate as far as I know). Best to either stop at an Apple store or call them to find out exactly what it is you need to do.

  • How do I get the iCloud to save and sync and upload info from both the devices on my account. Right now I can only do one

    How do I get the iCloud to save and sync and upload info from both the devices on my account. Right now I can only do one

    You must put each device on the Verizon cloud.
    Not both lines on one.
    Go and set up a my Verizon account for the second line and you will have Verizon cloud service on that line.
    Oh the term "icloud" is a trademark of Apple Inc. Verizon is not Apple.
    Good Luck

  • How do i get the driver to use an HP laserjet 5mp with my Mac that runs Lion?

    how do i get the driver to use an HP laserjet 5mp with my Mac that runs Lion?  I'm told by HP to get it through Apple updates but it doesn't show up. 

    The term "server", while technically correct, is misleading.  A print server takes the low-level protocol spoken by a printer and serves it over a higher-level protocol.  For example, parallel printer port (a.k.a. Centronics or IEEE 1284) and serve it over USB.  Or parallel or USB and serve it over Ethernet with a variety of printing protocols (lpr/lpd protocol, JetDirect protocol, port 9100 protocol, the names are confusing).
    In reality, a print server looks nothing like what we usually associate with "server" (which is typically a biggish computer).  Instead they usually look like adapter plugs or even adapter cables, or like a little network hub (just with printer connectors instead of network connectors).
    Here are a few examples (I'll use Amazon as a guide book, without implying that I endorse them).  Let's start with USB to parallel; it seems they tend to look like adapter cables.  Here is one that takes a USB plug (male) and creates a female port that you can plug your regular old printer cable in: http://www.amazon.com/Cables-To-Go-16899-IEEE-1284/dp/B000UX21PY/ref=sr_1_1?ie=U TF8&qid=1333640548&sr=8-1
    And here is one that goes from a USB plug directly into the printer: http://www.amazon.com/Parallel-Printer-Adapter-Connect-parallel/dp/B000BV8604/re f=sr_1_4?ie=UTF8&qid=1333640548&sr=8-4 replacing the old printer cable.
    Then there are (really cheap) Ethernet to printer adapters.  Here is one that you put into the printer (warning, the plastic cover will probably not fit afterwards): http://www.amazon.com/TP-Link-AC-TL-PS110P-Single-Parall/dp/B003CFATR4/ref=sr_1_ 11?s=electronics&ie=UTF8&qid=1333640755&sr=1-11 By the way, I really don't like this type, I always find them unreliable.  But they are cheap.
    The ones I like look more like a network hub. Here is the NetGear PS110: http://www.amazon.com/NETGEAR-PS110-parallel-Ethernet-100Base-TX/dp/B0002AF9JU/r ef=sr_1_2?ie=UTF8&qid=1333640860&sr=8-2
    And the HP external JetDirect: http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/18972-18972-236253-34214-64302-273 16.html?dnr=1&jumpid=reg_r1002_usenc-001&lang=en&cc=us (I think this is the best one of the lot).  Both of those you put next to the printer, use your existing parallel printer cable, and connect them to the network.  Don't get scared by the astronomical price of the HP; it's commonly available used.
    There are even some wireless models around.  In theory, you might be able to use a parallel-to-USB adapter cable and then plug the USB cable into your trusty Apple Airport (as a good Apple fanboy or fangirl you've bought an Airport, right?), but I don't know whether that will work.  With the HP JetDirect box I'm quite certain that it will work (but it's old-fashioned, doesn't come in white, doesn't do wireless, and is not the slightest bit hip or cool).

  • How do u get the icloud icon on your iphone 5

    how do i get the icloud icon on my iphone 5?

    There is no icon, just go in Settings- icloud and sign in with your apple id. Once you do you will be able enable different icloud options.
    Apple - iCloud - Learn how to set up iCloud on all your devices.

  • Remember only the icloud email address, forget the password, birthdate, and verification questions. How can i get the icloud email back?

    Remember only the icloud email address, forget the password, birthdate, and verification questions. How can i get the icloud email back?

    Go to https://getsupport.apple.com ; click 'See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Forgotten Apple ID security questions'.

  • How do I get the Tomcat port using Servlet.

    I am running Apache + Tomcat. All request are going though Apache. How do I get the Tomcat port using Servlet.

    See:
    ServletRequest.getServerPort()This will give the port upon which the request was recieved . . .which I blelieve is what you are looking for.

  • HT5058 How do I get the icloud contacts information moved over to the exchange contacts?

    How do I get my icloud contacts on my iphone moved into my exchange contacts at work? I have originally uploaded the contacts from my personal blackberry to the iphone then later we got exchange setup. How do I get the contacts from icloud loaded into exchange? I have access to them on the phone but not on my outlook exchange at my work computer.

    Hi neilfrommd,
    If you are having issues with your password not being saved in Mail, you may find the following article helpful (it is aimed at Mountain Lion, but should also apply to Mavericks):
    Mail (Mountain Lion): If your password is not saved
    http://support.apple.com/kb/PH11775
    Regards,
    - Brenden

  • How do i get the icloud add in for outlook 2010 64 bit

    I am running windows 7 64 bit and outlook 2010 64 bit. I had the icloud add in installed but it became corrupted, so i removed it, but now my iphone calendar does not sync with outlook and i need to find a way to download and reinstall a functioning add in.

    I have done that. When I try to synch my contacts and calendar I get the message: "Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again."
    But I do have Outlook configured with a default profile. When I follow the rabbit trail of troubleshooting it comes down to checking to make sure the iCloud add in is active. When I check that, not only is it not active - it's not there. Thus my original question: Where can I get the iCloud add in for Outlook?

  • How can I get the Icloud photos into my pc?

    Hello Buddy...
    I'm having problems to get my photos from my icloud into my computer.
    In the shared photos of icloud in my computer just show 165 photos but on my device I can see that I have 400 photos on my icloud.
    How could I get all this photos from my icloud? could you help me how can I proceed?
    TKS
    Look to hear you soon.

    Upgrade to Windows 7 or above

  • TS3988 How do I get the iCloud sign in to stop appearing?? I can not access anything on my ipad as the pop up keeps appearing

    My iCloud sign in pops up on my ipad. I can not access anything. How do I get rid of the pop up so I can access my ipad??

    You'll have to connect it to wifi so you can sign in with your password to authenticate the account.  If the pop-up is blocking you, try resetting the iPad (hold the power and home buttons at the same time until you see the Apple logo, then release).  As soon as you can after it restarts, go to Settings>Wifi and connect to your home network before the pop-up comes back.

  • Where and how do I get the SQL Query used by the Microsoft Generic Report Library - Alerts?

    Background:
    I'm tasked with the following: I need to create a new Report and the SQL
    The two canned reports that I can pattern after are: Microsoft Generic Report Library
    - Alerts (there is also an alert detail report that can be chosen within the alert report that we may want to use instead)
    - Most Common Alerts
    I'm trying to do this:
    Add another parameter to search on customfield3.
    It should be able to report on all alerts that were assigned to the specific team for the time period along with the top 10 (most common alerts) assigned to the team for the time period.
    Choose as the objects (group) all servers, but Imay need to adjust the report to just look at all alerts without having to provide objects or a group
    The struggle I'm having is: I know SQL. I know how to create an RDL file.
    But Where are the RDL files for the canned reports so I can modify the canned RDL and modify its SQL and forms?
    What is the SQL/ where can I find the SQL used for the Generic Report Library -> Alerts

    Easy but you need to extract it from Microsoft Generic Report Pack. 
    So.. the procedure is as follows:
    1) You export and unseal Management Pack from your SCOM using
    Boris's OpsgMgr tools (MPViewer
    2.3.3)
    2) Ok you've got unsealed xml, now the tricky part, use
    MpElementsExtract tool, example of usage:
    MPElementsExtract.exe <MP.xml> /ex /destination:<destination>
    That you way you get several folders out of mp:
    DWScripts, DWSubScripts, LinkedReports, ReportResources, Reports
    Take a look into content of first 2, there will be pure sql scripts, and rdl's are in Reports folder :)
    Other way is to just use SQL profiler and catch SQL query while generating report. 
    --- Jeff (Netwrix)

  • How do I get the printer to use regular (not Colorlok) paper when printing what it considers photos?

    I get emails with attachments of a document that someone has taken a picture of with  their iphone (a bill, a receipt, etc). I finally got the HP software to give me a print option, but when I try to print, the printer gives the error message that you must use colorlok paper. I'm printing a receipt, not a glossy family photo! Is there a setting that can be adjusted?

    Welcome to the HP Community , I saw your post about the message you're seeing to select colorlok paper, and I will surely do my best to help! When you open up the email attachment that you need to print, which program are the attachments opening up in that are not allowing you to select a different paper type? Let me know which program it is, and I will look in to the options. In the meantime, try using another program to print the items from if that's an option to see if that helps! I hope to hear from you! Say thanks for my reply to help you today by clicking the "thumbs up" below!

  • I want to use the ethernet connection from my new iMac to my Time Capsule.  It seems only the Wifi is seen by either device.  Ive connected the Time Capsule to the iMac.  How can I get the iMac to use the wired connection

    I want to connect my iMac to my Time Capsule using Ethernet.  I have them connected via an Ethernet cable, but only WiFi seems to be working.  How can I specify the Ethernet connection instead of WiFi?  Thanks
    Welked

    Go to preferences, network and see if ethernet is indicated. Be sure it shows a green dot.  Also be sure it is at the top of the list (above WiFi).  If not click on the the wheel at the bottom and set service order.

  • I tried to install firefox 4 and but not compatible with my computer Mac 10.4 now I don't have a firefox in my dock. How do I get the one I used before in my dock?

    How can I get firefox in my application folder? I lost it while trying to upgrade to firefox 4? I don't it in my dock. My computer is Mac 10.4 older one. Can you help me?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For an unofficial Firefox 4 compatible version that runs on Mac OS X 10.4.11 or Mac OS X 10.5.8 (PowerPC) you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

Maybe you are looking for