How do I ignore 10920 error

I am using Labview with a MultiIO DAQCard-AI-16E-4. I am using both counters. I get a 10920 error... and my data aquisition stops. I want to ignore this error and continue aquiring data.
I can easily replicate this error by removing the input wire to the GATE and then connecting it again while running(simulate an intermittennt short).
How do I ignore this error and continue aquiring?
I can replicat

Use General Error Handler.vi (Functions palette --> Time & Dialog). It allows to cancel an error by setting exception action, exception code and exception source. Read the online help for more information.

Similar Messages

How to ignore JSP errors in JDeveloper 10g IDE?

How do I ignore errors in JSPs? I forgot it is in server.xml or some other xml configuration file.

Thanks for your reply. there is 'deprecation warnings' under Project Properties--> Compiler. These errors are not deprecation errors.
The below code doesn't help either.
<jsp-config>
<jsp-property-group>
<url-pattern>*.jsp</url-pattern>
<el-ignored>false</el-ignored>
</jsp-property-group>
</jsp-config>

How to ignore SSL errors

When setting up email via secure smtp and imap there is an error because of self signed cert and i am unable to complete the setup process. I know that
the ssl cert is invalid and ready to deal with it better than leave plain text connection. How to ignore ssl errors and continue with email setup?

Hello akamit,
If I understand your question correctly, I think there is no ready solution for this situation. You could have a look at https://bugzilla.mozilla.org/show_bug.cgi?id=874346 - the discussion there may help you to understand the problem in more detail.
Kind regards.

How to Ignore Insert Errors in LKM.

Hi,
I would Like to know how to Ignore insert errors in Oracle Data Integrator (Something like flat file mechanism, where the errors are located into .bad and .error files). If My Step 'insert new records' thrown an error regarding to Wrong Data, Constraint, etc. I would like to redirect the records with error to another location without affect the performance.
is this possible throws Interface configuration or something like that?
Thanks in advance.

Thanks for your reply. there is 'deprecation warnings' under Project Properties--> Compiler. These errors are not deprecation errors.
The below code doesn't help either.
<jsp-config>
<jsp-property-group>
<url-pattern>*.jsp</url-pattern>
<el-ignored>false</el-ignored>
</jsp-property-group>
</jsp-config>

Firefox pops up an error message on certain pages, all other browsers work fine, how can I make firefox ignore the "error" [e2219] css init error: ReferenceError: g is not defined

Basically I want to replace the Ajax Control Toolkit Slider in favor of the Component One Studio for iPhone Slider for better mobile/desktop consistency (the ajax slider doesn't work well with iPhone). I created a simple page that works on every browser and platform (iPhone, Android, Mac, Windows) except Firefox, which fails on every platform. I have already tried disabling all plugins (safe mode) and clearing cache, I have also tried this with different versions of Firefox on different platforms. I posted this error on the Component One forum but since this only occurs with Firefox I believe this is a Firefox issue.
I searched for this error on the forums and Google but didn’t get any results:
''[e2219] css init error: ReferenceError: g is not defined''
The console has this message:
''[12:05:26.954] uncaught exception: [Exception... "prompt aborted by user" nsresult: "0x80040111 (NS_ERROR_NOT_AVAILABLE)" location: "JS frame :: resource:///components/nsPrompter.js :: openTabPrompt :: line 462" data: no]''
You can see the error by visiting http://www.componentone.com/i/
Visit the same URL with IE, Chrome or Safari and there is no error. If I click [OK] the page loads normally enough for me. Is there some JavaScript or CSS line I can put in the page to make Firefox ignore the error? If so that would be great because even if there is a fix put into Firefox itself there will be those millions of users out there that will not upgrade.

A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

How to ignore MP560 error code B200

I have got error code B200 on my MP560 last week. I tried every methods which I found on internet, such as unplug, reset, deep clean the printhead, etc. But it doesn't work. I think I have to give up to recover the print function. I plan to buy a new printer but I'd like to use this MP560 just as a scanner. Is there any way to ignore the error code so I can use it as a scanner?
Thanks a lot to anybody who can help me.

Hi griea,
To try and resolve the issue, please remove the power cord from the back of the printer and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the error persists, the printer will require servicing to resolve the issue.
Please drop us a line by clicking on the Contact Us link to start the process!

How to force TestStand to ignore LabVIEW errors

Hi,
usually where there is an error in the LabVIEW code module TestStand stops and gives a pouup message .
Is there any way to force TestStand to ignore LabVIEW errors and contiouse testing?
Thanks

You can also work more globally - go to the Configure menu item and select Station Options.
At the bottom of the execution tab, there's a section for what to do on Run-time errors. -> Show dialog, Cleanup, Ignore or Abort.
Whilst not specific to steps configured to use the LabVIEW adapter (assuming you're mixing some programming languages) that at least get you continuing on to the next step without the dialog.
If you need to assess if it's specifically LabVIEW modules causing the error, then you need to use the Station, Process Model or Sequence File callback for On run-time error, and the step gets passed as a parameter. That would allow you to work out if the step was LabVIEW specifically and then make a decision as to what to do next.
Hope that helps.

How to resolve ORA-00001 Error in SQL Insert?

Hi all, I need your appreciated help.
I make a plsql procedure that is inserting a row according cursor value, I'm having oracle error ORA-00001: unique constraint (constraint_name) violated.
You may see this message if a duplicate entry exists at a different level: in RDBMS MySQL I have the syntax IGNORE to resolve this duplication error... and in Oracle ?
Thanks for your time and hints.
Miguelito

user6317803 wrote:
How to resolve ORA-00001 Error in SQL Insert?ORA-00001 means table has unique/primary key/index and you are trying to insert a row with key value that already exists in the table. I'll assume table COUNTRIES has primary key on COUNTRY_ID. Then change SQL to:
SQL = "INSERT INTO COUNTRIES(COUNTRY_ID,COUNTRY_NAME,REGION_ID) SELECT 'BZ','BLZ',3 FROM DUAL WHERE NOT EXISTS(SELECT 1 FROM COUNTRIES WHERE COUNTRY_ID = 'BZ')"There is a good chance table COUNTRIES also has unique key/index on COUNTRY_NAME. If so use:
SQL = "INSERT INTO COUNTRIES(COUNTRY_ID,COUNTRY_NAME,REGION_ID) SELECT 'BZ','BLZ',3 FROM DUAL WHERE NOT EXISTS(SELECT 1 FROM COUNTRIES WHERE COUNTRY_ID = 'BZ' OR COUNTRY_NAME = 'BLZ')"SY.

"Ignore SSL errors" not an option in my version of Windows Mail for 8.1

I have had problems connecting to my org's EAS using the Mail/Calendar/People apps since being forced to upgrade to 8.1. I used Microsoft Remote Connectivity Analyzer and see there's a problem with these apps accepting the Go Daddy certificates used
by my org. When I choose "Ignore SSL errors" on the Analyzer, it connects fine.
I've seen posts throughout indicating that the Mail app has a check box that allows the user to "Ignore SSL errors" BUT that is not showing up on my version of the app.
Can someone please provide guidance as to why my version doesn't have this critical feature?

Hi,
I'm not sure where you find posts about "Ignore SSL errors" in Mail App for Windows 8.1, this option is also unavailable in my system, could you please share the posts you found with us?
Maybe you mean this? But it's more related to development.
http://blogs.msdn.com/b/wsdevsol/archive/2013/10/17/how-to-ignore-self-signed-certificate-errors-in-windows-store-apps-8-1.aspx
http://blogs.technet.com/b/ptsblog/archive/2013/11/13/how-to-ignore-self-signed-certificate-errors-in-windows-store-apps-8-1.aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to manage the ORA- errors

hi, can anyone tell me how to handle the ora errors, let say when a usere doesnt have the priveleges to add data in database this exception is generated:
ORA-06550: line 1, column 19: PL/SQL: ORA-01031: insufficient privileges ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored i want to display my message when this errors occure.Can i use the classes in the SRDEmo to catch the ora exceptions?
thanks in advance:)

What we did is make our own "filterOracleUserException". In this class we replace the 'default' ORA-<error>-<errortext> with our own error message which is read from a bundle:
Here is the code:
private static String filterOracleUserException(String input) {
if (input != null) {
String[] lines = input.split("[\r\n]");
if (lines.length > 0) {
Matcher m = ORACLE_USER_ERROR.matcher(lines[0]);
if (m.matches()) {
return m.group(1).trim();
m = ORACLE_ERROR.matcher(lines[0]);
if (m.matches()) {
try {
String errorCode = lines[0].substring(4,9);
return JSFUtils.getStringFromBundle("AnError.ORA." + errorCode
,input);
} catch (IndexOutOfBoundsException ex) {
return input;
return input;
good luck with it
Luc Bors
Message was edited by:
lucbors

How do I pass an error status from my java code back to the Program Job Ser

How do I pass an error status from my java code back to the Program Job Server?
I have a jar program object that reports a scheduled status of "Success" even if the java code errors out.

Exceptions thrown from the program object are ignored by the program job server.
You need to configure the Program Object, then stream out a special string sequence to the stdout of the Program Object, to set the scheduled instance status to Failed.
Look up SAP KBase 1201804 - How to programmatically set the status of a Program object to "Failed"
Sincerely,
Ted Ueda

Icloud has has exclamation but I don't know how to tell what the error is? I recently selected bookmarks for syncing.

icloud has has exclamation but I don't know how to tell what the error is? I recently selected bookmarks for syncing.

TM will show it has done a backup.. Look at the info.. when was the backup completed??
If you want more details install the widget.
A1 here.
http://pondini.org/TM/Troubleshooting.html
The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it.
There is an error.. probably trivial.. firmware update, default password..
Open the airport utility and find out what the error is.
Simply click the TC and see status in the summary page.. it will list all the errors and what you should do.. fix or ignore them. ie this TC has an error.. default password.. I chose to ignore.. when I "fix" the problem the LED goes green.
Here is additional TC.. it is blinking amber with faults.
Click the fault. eg default password.
You can ignore or edit .. if you click edit it will take you to the full setup where you can change the settings.
I ignored my errors and now it is green..

You can safely ignore some errors that fsck reports....?

I got the following report while Verifying in DU after installing the latest Security Update 2009-001. I took every possible precaution: installed in Safe Boot from standalone download, repaired Permissions before and after, disconnected all peripherals and stood on my head.
I repaired successfully, booted from the Disc. DU, while booted from the disc, saw the error too, so I know it wasn't a spurious error appearing only when booted from the HD. I'm wondering if there's anything here to be concerned about. I have never before had DU report the disc needed repair.
(I also repaired a Permissions error while booted in Safe Mode, before doing any of this. This was strange, since I'd just done a Permissions repair only a few days earlier for the QT Update. I won't get into that now, since I my main concern is the Disc error, and I don't want to overload this post with too many questions).
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Invalid volume free block count
Invalid volume free block count
ead of %@)",2)
28212389
28211294
The volume Hard Drive needs to be repaired.
Error: The underlying task reported failure on exit
Both the Pogue, Missing Manual, Tiger, book and this KB article, report "Volume Bit Map needs minor repair" and "Invalid volume free block count " as "benign" errors, to be ignored.
"You can safely ignore some errors that fsck reports when journaling is enabled."
http://support.apple.com/kb/TS2028
I've been looking into this on my own, but here's the source of my confusion: 1. The heading of the KB article says it is for 10.3.9 or earlier (the article was last modified August, 2008), but way down at the bottom, 10.4 is listed under "Products Affected." Is this just someone at Apple being sloppy? 2. Both the Pogue Tiger book p.778, and the KB article describe this as an error that can be reported while repairing using fsck. They don't mention errors reported by DU, which is how I got this error. But just to be certain, can I safely assume it would apply to errors reported by DU as well? They are, effectively, the same thing, aren't they?
No strange sounds coming from the HD and everything seems to be fine. And no more reports of this kind coming from DU.

OK. Thanks very much,
My question arose because both the KB article and Pogue discuss these errors only in the context of running fsck. Since you say journaling is automatically turned off when DU does repairs, _does that, then, mean that these errors are only spurious when coming from fsck, not DU, because journaling is enabled in fsck? Journaling enabled is what causes them to appear in fsck?_ Is this why there's no mention of DU for these errors from the Apple KB article and Pogue? And does that mean that *if DU reports them, not fsck,* they are to be taken more seriously, that they are benign, meaning not very serious, but not to be dismissed completely as when they are reported by fsck?
Yes, the errors are benign, but should not be ignored.
I thought the KB article and Pogue were letting me off the hook completely. I see that's, maybe, not exactly the case.
*I never ran fsck.* I did everything from DU, either booted from the HD or the Tiger Installer disc. Fsck only came up because I discovered this KB article and the Pogue excerpt, which made me think that, since fsck is essentially DU, but run from a command line, they applied as well to the errors DU found. I didn't realize that, maybe, journaling enabled in fsck was at the heart of this issue.
As mentioned, I ran DU from the Tiger Installer disc and it repaired the error right away on the first run. I ran it twice just to be sure.
If DU ran successfully but did not repair the problem, then run Repair Disk repeatedly until no problems are reported.
There was no other problem, only the error DU reported, which was successfully repaired.
DU is supposed to disable journaling before repairing the drive. But there's nothing wrong with disabling journaling manually before repairing the drive.
Meaning I can't always assume it will? And, perhaps, it didn't this time and that's why I got the error?
Everything seems fine now; I was just somewhat alarmed, since I didn't understand where this could be coming from. I'd already verified the disc, booted from my clone, very recently.
Message was edited by: WZZZ

When I update my nano ipod I get an error message "User ipod cannot be updated. The disk couldnot be read from or written to." How can I overcome this error message.

In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.

Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling

PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping

Hi
We ve go a Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
Thanks in advance
Michael

Hi Michael,
Please refer here for the mapping API description:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
Hope this helps,
Greg

How do I ignore 10920 error

Similar Messages

Maybe you are looking for