How do I improve package loading performance in BIDS when I open a package which is imported from another place?

[This is just for sharing information for those common asked questions collected from forums. If you have any better way or feedback, please directly reply in this thread so that community users can benefit from your answers.]
Question:
I have a SSIS package which has some execution problem in production environment and I need to check it and perform debugging on my local machine, however when I add the package into my SSIS project and open it in BIDS, my BIDS hangs for a long time.
Answer:
This issue is usually caused by the fact that your SSIS package is complex with many tasks including many connection managers. When you open the SSIS package in BIDS, by default the validation process on each task will start. Since your SSIS package is copied
from another place, the connections may be invalid. In this case, the validation process will spend a lot of time and cause the BIDS not working during this time.
To resolve this issue, you can do as follows:
1.Before you add the SSIS package, select your SSIS project first, then click the SSIS menu, and change your SSIS project to Offline mode by checking "Work Offline".
2.Add your SSIS package to the project and change each Task's DelayValidation property to True.
3.After these steps, you can modify the connections to be valid based on your local test environment.
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Hello Charles,
My workmate am so happy to hear this solution I told him. Really thanks for your detail solution.
Best regards,
Challen Fu
Challen Fu
TechNet Community Support

Similar Messages

Hey, im really sick of this, how can i open folders but in the same windows, when i open a folder which is inside of another one, it just open me a new window, its so annoying, could anyone tell me what to do? im using mac os 10.7.2

hey, im really sick of this, how can i open folders but in the same windows, when i open a folder which is inside of another one, it just open me a new window, its so annoying, could anyone tell me what to do? im using mac os 10.7.2

Finder > Preferences > General > Always open folders in a new window: uncheck

How to improve the load performance while using Datasources for the Invoice

HI All,
How to improve the load performance while using Datasources for the Invoice . Actually my invoice load (Appx. 0.4 M records) is taking very long time nearly ~16 to 18 hrs to update data from R/3 to 0ASA_DS01.
If I load through flat file it will load with in ~20 Min for the same amount of data.
Please suggest how to improve load performance.
PS: I have done the Inpo package settings as per the OSS note.
Regads
Srininivasarao.Namburi.

Hi Srinivas,
Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
Thanks,
Divyesh
Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM

How to improve query & loading performance.

Hi All,
How to improve query & loading performance.
Thanks in advance.
Rgrds
shoba

Hi Shoba
There are lot of things to improve the query and loading performance.
please refer oss note :557870 : Frequently asked questions on query performance
also refer to
weblogs:
/people/prakash.darji/blog/2006/01/27/query-creation-checklist
/people/prakash.darji/blog/2006/01/26/query-optimization
performance docs on query
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/064fed90-0201-0010-13ae-b16fa4dab695
This is the oss notes of FAQ on query performance
1. What kind of tools are available to monitor the overall Query Performance?
1. BW Statistics
2. BW Workload Analysis in ST03N (Use Export Mode!)
3. Content of Table RSDDSTAT
2. Do I have to do something to enable such tools?
Yes, you need to turn on the BW Statistics:
RSA1, choose Tools -> BW statistics for InfoCubes
(Choose OLAP and WHM for your relevant Cubes)
3. What kind of tools is available to analyze a specific query in detail?
1. Transaction RSRT
2. Transaction RSRTRACE
4. Do I have an overall query performance problem?
i. Use ST03N -> BW System load values to recognize the problem. Use the number given in table 'Reporting - InfoCubes:Share of total time (s)' to check if one of the columns %OLAP, %DB, %Frontend shows a high number in all Info Cubes.
ii. You need to run ST03N in expert mode to get these values
5. What can I do if the database proportion is high for all queries?
Check:
1. If the database statistic strategy is set up properly for your DB platform (above all for the BW specific tables)
2. If database parameter set up accords with SAP Notes and SAP Services (EarlyWatch)
3. If Buffers, I/O, CPU, memory on the database server are exhausted?
4. If Cube compression is used regularly
5. If Database partitioning is used (not available on all DB platforms)
6. What can I do if the OLAP proportion is high for all queries?
Check:
1. If the CPUs on the application server are exhausted
2. If the SAP R/3 memory set up is done properly (use TX ST02 to find bottlenecks)
3. If the read mode of the queries is unfavourable (RSRREPDIR, RSDDSTAT, Customizing default)
7. What can I do if the client proportion is high for all queries?
Check whether most of your clients are connected via a WAN connection and the amount of data which is transferred is rather high.
8. Where can I get specific runtime information for one query?
1. Again you can use ST03N -> BW System Load
2. Depending on the time frame you select, you get historical data or current data.
3. To get to a specific query you need to drill down using the InfoCube name
4. Use Aggregation Query to get more runtime information about a single query. Use tab All data to get to the details. (DB, OLAP, and Frontend time, plus Select/ Transferred records, plus number of cells and formats)
9. What kind of query performance problems can I recognize using ST03N
values for a specific query?
(Use Details to get the runtime segments)
1. High Database Runtime
2. High OLAP Runtime
3. High Frontend Runtime
10. What can I do if a query has a high database runtime?
1. Check if an aggregate is suitable (use All data to get values "selected records to transferred records", a high number here would be an indicator for query performance improvement using an aggregate)
2. o Check if database statistics are update to data for the Cube/Aggregate, use TX RSRV output (use database check for statistics and indexes)
3. Check if the read mode of the query is unfavourable - Recommended (H)
11. What can I do if a query has a high OLAP runtime?
1. Check if a high number of Cells transferred to the OLAP (use "All data" to get value "No. of Cells")
2. Use RSRT technical Information to check if any extra OLAP-processing is necessary (Stock Query, Exception Aggregation, Calc. before Aggregation, Virtual Char. Key Figures, Attributes in Calculated Key Figs, Time-dependent Currency Translation) together with a high number of records transferred.
3. Check if a user exit Usage is involved in the OLAP runtime?
4. Check if large hierarchies are used and the entry hierarchy level is as deep as possible. This limits the levels of the hierarchy that must be processed. Use SE16 on the inclusion tables and use the List of Value feature on the column successor and predecessor to see which entry level of the hierarchy is used.
5. Check if a proper index on the inclusion table exist
12. What can I do if a query has a high frontend runtime?
1. Check if a very high number of cells and formatting are transferred to the Frontend (use "All data" to get value "No. of Cells") which cause high network and frontend (processing) runtime.
2. Check if frontend PC are within the recommendation (RAM, CPU MHz)
3. Check if the bandwidth for WAN connection is sufficient
and the some threads:
how can i increse query performance other than creating aggregates
How to improve query performance ?
Query performance - bench marking
may be helpful
Regards
C.S.Ramesh
[email protected]

Improve data load performance using ABAP code

Hi all,
I want to improve my load performance using ABAP code, how to do this?. If i writing ABAP code in SE38 how i can call
in BW side? if give sample code to improve load performance it will be usefull. please guide me.

There are several points that can improve performance of your ABAP code:
1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
4.Avoid using nested SELECT and SELECT statements within LOOPs.
5. Avoid using INTO CORRESPONDING FIELDS OF. Instead use INTO TABLE.
6. Avoid using SELECT * and select only the required fields from the table.
7. Avoid Executing a SELECT multiple times in the program.
8. Avoid nested loops when working with large internal tables.
9.Whenever using READ TABLE use BINARY SEARCH addition to speed up the search.
10. Use FIELD-SYMBOLS instead of a work area when there are more than 200 entries in an internal table where some fields are being manipulated.
11. Use MOVE with individual variable/field moves instead of MOVE-CORRESPONDING.
12. Use CASE instead of IF/ENDIF whenever possible.
13. Runtime transaction code se30 can be used to measure the application performance.
14. Transaction code st05 can be used to analyse the SQL trace and measure the performance of the select statements of the program.
15. Start routines can be used when transformation is needed in the data package level. Field/individual routines can be used for a simple formula or calculation. End routines are used when you wish to populate data not present in the source but present in the target.
16. Always use a WHERE clause for DELETE statement. To delete records for multiple values, use SELECT-OPTIONS.
17. Always use 'IS INITIAL' instead of equal to '' because null for a character is '' but '0' for an integer.
Hope it helps.

How Can we improve the report performance..?

Hi exports,
I am learning the Business Objects XIR2, Please let me know How Can we improve the report performance..?
Please give the answer in detailed way.

First find out why your report is performing slowly. Then fix it.
That sounds silly, but there's really no single-path process for improving report performance. You might find issues with the report. With the network. With the universe. With the database. With the database design. With the query definition. With report variables. With the ETL. Once you figure out where the problem is, then you start fixing it. Fixing one problem may very well reveal another. I spent two years working on a project where we touched every single aspect of reporting (from data collection through ETL and all the way to report delivery) at some point or another.
I feel like your question is a bit broad (meaning too generic) to address as you have phrased it. Even some of the suggestions already given...
Array fetch size - this determines the number of rows fetched at a single pass. You really don't need to modify this unless your network is giving issues. I have seen folks suggest setting this to one (which results in a lot of network requests) or 500 (which results in fewer requests but they're much MUCH larger). Does either improve performance? They might, or they might make it worse. Without understanding how your network traffic is managed it's hard to say.
Shortcut joins? Sure, they can help, as long as they are appropriate. [Many times they are not.|http://www.dagira.com/2010/05/27/everything-about-shortcut-joins/]
And I could go on and on. The bottom line is that performance tuning doesn't typically fall into a "cookie cutter" approach. It would be better to have a specific question.

How can I improve below SQL performance.

Hi,
How can I improve below SQL performance. This SQL consumes CPU and occures wait events. It is running every 10 seconds. When I look at the session information from Enterprise Manager I can see that "Histogram for Wait Event: PX Deq Credit: send blkd"
I created some indexes. I heard that the indexes are not used when there is a NULL but when I checked the xecution plan It uses index.
SELECT i.ID
FROM EXPRESS.invoices i
WHERE i.nbr IS NOT NULL
AND i.EXTRACT_BATCH IS NULL
AND i.SUB_TYPE='COD'
Explain Plan from Toad
SELECT STATEMENT CHOOSECost: 77 Bytes: 6,98 Cardinality: 349
     4 PX COORDINATOR
          3 PX SEND QC (RANDOM) SYS.:TQ10000 Cost: 77 Bytes: 6,98 Cardinality: 349
               2 PX BLOCK ITERATOR Cost: 77 Bytes: 6,98 Cardinality: 349
                    1 INDEX FAST FULL SCAN INDEX EXPRESS.INVC_TRANS_INDX Cost: 77 Bytes: 6,98 Cardinality: 349
Execution Plan from Sqlplus
| Id | Operation | Name | Rows | Bytes | Cost | TQ |IN-OUT| PQ Distrib |
| 0 | SELECT STATEMENT | | 349 | 6980 | 77 | | | |
| 1 | PX COORDINATOR | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10000 | 349 | 6980 | 77 | Q1,00 | P->S | QC (RAND) |
| 3 | PX BLOCK ITERATOR | | 349 | 6980 | 77 | Q1,00 | PCWC | |
|* 4 | INDEX FAST FULL SCAN| INVC_TRANS_INDX | 349 | 6980 | 77 | Q1,00 | PCWP | |
Predicate Information (identified by operation id):
4 - filter("I"."NBR" IS NOT NULL AND "I"."EXTRACT_BATCH" IS NULL AND "I"."SUB_TYPE"='COD')
Note
- 'PLAN_TABLE' is old version
- cpu costing is off (consider enabling it)
Statistics
141 recursive calls
0 db block gets
5568 consistent gets
0 physical reads
0 redo size
319 bytes sent via SQL*Net to client
458 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
0 rows processed
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00
Redo NoWait %: 100.00
Buffer Hit %: 99.70
In-memory Sort %: 100.00
Library Hit %: 99.81
Soft Parse %: 99.77
Execute to Parse %: 63.56
Latch Hit %: 90.07
Parse CPU to Parse Elapsd %: 0.81
% Non-Parse CPU: 98.88
Top 5 Timed Events
Event     Waits     Time(s)     Avg Wait(ms)     % Total Call Time     Wait Class
latch: library cache     12,626     16,757     1,327     62.6     Concurrency
CPU time          5,712          21.Mar
latch: session allocation     1,848,987     1,99     1     07.Nis     Other
PX Deq Credit: send blkd     1,242,265     981     1     03.Tem     Other
PX qref latch     1,405,819     726     1     02.Tem     Other
The database version is 10.2.0.1 but we haven't installed the patch 10.2.0.5. yet.
I am waiting your comments.
Thanks in advance

Welcome to the forum.
I created some indexes. I heard that the indexes are not used when there is a NULL but when I checked the xecution plan It uses index. What columns are indexed?
And what do:
select i.sub_type
,      count(*)
from   express.invoices i
where i.nbr is not null
and    i.extract_batch is null
group by i.sub_type; and
select i.sub_type
,      count(*)
from   express.invoices i
group by i.sub_type; return?
Also, try use the {noformat}{noformat} tag when posting examples/execution plans etc.
See: HOW TO: Post a SQL statement tuning request - template posting for more tuning instructions.
It'll make a big difference:
SELECT i.ID
FROM EXPRESS.invoices i
WHERE i.nbr IS NOT NULL
AND i.EXTRACT_BATCH IS NULL
AND i.SUB_TYPE='COD'
Explain Plan from Toad
SELECT STATEMENT CHOOSECost: 77 Bytes: 6,98 Cardinality: 349
     4 PX COORDINATOR
          3 PX SEND QC (RANDOM) SYS.:TQ10000 Cost: 77 Bytes: 6,98 Cardinality: 349
               2 PX BLOCK ITERATOR Cost: 77 Bytes: 6,98 Cardinality: 349
                    1 INDEX FAST FULL SCAN INDEX EXPRESS.INVC_TRANS_INDX Cost: 77 Bytes: 6,98 Cardinality: 349
Execution Plan from Sqlplus
| Id | Operation | Name | Rows | Bytes | Cost | TQ |IN-OUT| PQ Distrib |
| 0 | SELECT STATEMENT | | 349 | 6980 | 77 | | | |
| 1 | PX COORDINATOR | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10000 | 349 | 6980 | 77 | Q1,00 | P->S | QC (RAND) |
| 3 | PX BLOCK ITERATOR | | 349 | 6980 | 77 | Q1,00 | PCWC | |
|* 4 | INDEX FAST FULL SCAN| INVC_TRANS_INDX | 349 | 6980 | 77 | Q1,00 | PCWP | |
Predicate Information (identified by operation id):
4 - filter("I"."NBR" IS NOT NULL AND "I"."EXTRACT_BATCH" IS NULL AND "I"."SUB_TYPE"='COD')
Note
- 'PLAN_TABLE' is old version
- cpu costing is off (consider enabling it)
Statistics
141 recursive calls
0 db block gets
5568 consistent gets
0 physical reads
0 redo size
319 bytes sent via SQL*Net to client
458 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
0 rows processed
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00
Redo NoWait %: 100.00
Buffer Hit %: 99.70
In-memory Sort %: 100.00
Library Hit %: 99.81
Soft Parse %: 99.77
Execute to Parse %: 63.56
Latch Hit %: 90.07
Parse CPU to Parse Elapsd %: 0.81
% Non-Parse CPU: 98.88
Top 5 Timed Events
Event     Waits     Time(s)     Avg Wait(ms)     % Total Call Time     Wait Class
latch: library cache     12,626     16,757     1,327     62.6     Concurrency
CPU time          5,712          21.Mar
latch: session allocation     1,848,987     1,99     1     07.Nis     Other
PX Deq Credit: send blkd     1,242,265     981     1     03.Tem     Other
PX qref latch     1,405,819     726     1     02.Tem     Other

How can I improve my imac performance?

Hi guys,
When I'm using a complex files on Adobe illustrator CS4, it crashes...
How can I improve my imac performance?
Here's my system's specs:
Model Name:    iMac
Model Identifier:    iMac11,1
Processor Name:    Intel Core i5
Processor Speed:    2.66 GHz
Number Of Processors:    1
Total Number Of Cores:    4
L2 Cache (per core):    256 KB
L3 Cache:    8 MB
Memory:    4 GB
Processor Interconnect Speed:    4.8 GT/s
Boot ROM Version:    IM111.0034.B02
SMC Version (system):    1.54f36
Thanks for youyr help!

I figured you'd ask for those Since I can't remember the topic/subject line, I have no idea if I have enough time in this life to try to find them - I had subscriptions for all of them, but of course, those went poof into cyberspace.
Edit: Athough the search function does not work well (could not specificy 'iMac' - would get "unauthorized to search" every time), so I had to go through quite a few, but I found two of the major threads:
https://discussions.apple.com/message/12417693#12417693
https://discussions.apple.com/message/12807961#12807961
Enjoy reading....
Barbara

I was given a 16Gb ipad mini retina with cellular but I need more storage. We do not have the receipt as it is a gift. I like to swap for a 64Gb unit and pay for the difference my self, how do I go about doing that? I have not open the packaging yet.

I was given a 16Gb ipad mini retina with cellular but I need more storage. We do not have the receipt as it is a gift. I like to swap for a 64Gb unit and pay for the difference, how do I go about doing that? I have not open the packaging yet.

Hi
Thanks for that. Yes, the ipad was purchased recently. I called Apple last Friday and they ask for the receipt. I wonder if anyone were able to swap their ipad for a larger storage in the past at the apple store without a receipt? 16Gb is such a small storage.

My iphoto will not load, all it does when i open it is just show a blank iphoto and won't load any of my photos that were already in there.

My iphoto will not load, all it does when i open it is just show a blank iphoto and won't load any of my photos that were already in there. Any way to fix it ?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version. How can I have the header and footer included when I open a template?

I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version. How can I have the header and footer included when I open a template?

That is becuase Pages 5.1 has numerous unnounced surprises for the unwary user. Among the surprises:
- it strips out images from headers and footers without warning
- it strips out bookmarks without wanring (yes, all those bookamrks you laboriously put into a document: poof! Gone.)
- it strips out alternating left/right margins, without warning.
There are many more suprises, as you'll see from glancing through these discussions. They fall into two main categories: things that are present in version 4.3 but that are missing in 5.1, things like
-mail merge
-meaningful Applescript/Services support
-non-contiguous text selection
-ability to set defaul zoom
-ability to see comments while editing
-ability to print comments
-ability to read RTF files
-ability to drag in hyperlinked ted from a browser
These about about 90 other features are gone.
Then there are the bugs. Hyperlinks do not reliably export to a PDF file any longer. There have been multiple problems with printing report. Some fonts place stray characters in the headers. Many reports of the program crashing, courrupting files, etc.
Fortunately for you, the previous version of Pages is still on your system. Export any documents you may have created or edited with Pages 5.1 (another great surprise: files created with version 5.1 cannot be read by any previous version of Pages: not just 4.3 but even 5.01!). Then trash 5.1 and use 4.3 until (unless?) it is stable and has a reasonably robust feature set.

Subscribe to Photoshop CC for photographers but keeps saying my trial has expired. Both Photoshop and lightroom. Smetimes this happens 3 times in one day or perhaps every third day. When I open either package I get a message saying that I have 00 days le

Both Photoshop and Lightroom exhibit the same error. Sometimes this happens 3 times in one day or perhaps every third day. When I open either package I get a message saying that I have 00 days left in the trial and to continue I need to purchase a licence or start a trail. If I click on purchase a Licence the once I log in with Adobe ID I can get started. I have contacted Adobe chat support 6 times. They suggest deleting an opm.db file and assure me that this will sort the problem and within 24 hours back to square one

Here it happens only with photoshop cc 2014. i just deleped opm.db i will check again tomorrow.

How can I get my instructional text to display when I open the pdf?

I have some fields which I have set up which have help/instructions for completing the information required. This is a questionnaire. When I save it as a pdf, the instsructional text does not display. I would really appreciate if someone can tell me how to fix this.

Thanks for taking the time to respond to my query. The text does not display when I hover my mouse over it.
cheers Deborah Frow
From: Ajlan huda <[email protected]>
To: Deborah Frow <[email protected]>
Sent: Monday, 12 January 2015, 5:24
Subject: Reply marked as helpful on How can I get my instructional text to display when I open the pdf?
|
How can I get my instructional text to display when I open the pdf?
Ajlan huda marked SumitV's reply on How can I get my instructional text to display when I open the pdf? as helpful. View the full replyMarked as helpful:Hi Pacific Immigration, In Adobe Acrobat/ Adobe Reader there is no “?” shown for help, but if you mouse over the field for 1-2 seconds the Help text is shown.
Following How can I get my instructional text to display when I open the pdf? in these streams: Inbox
|

BO4 - The action cannot be performed WIS 30650 when try open some WEBI docs

Get message BO4 - The action cannot be performed WIS 30650 when try open some WEBI docs.
Documents created brand new in BI 4.0 .
Some docs open fine.
Get message even when log in as Administrator.
Windows 2008 Server Oracle 11.2.0.1
Any idea what causes this.
Many Thanks

Hi,
Thanks for reponse.
Distributed environment 1 server hosts web application server (Tomcat), 1 server hosts BOE components.
Contacted BO support and we did right click on document/modify and get error message you referred to.
However - also get this message when try right click modify existing web intelligence sample reports or even try open which ship with the product and have never been modified.
Checked that file referred to exist in Input frs and does.
Logged in as Administrator so not permission-realted.
Thi seems like a huge bug to me that can't vene open the webi sample reports which ship with the product.
servers look fine - I'm only one using and can create ans save reports fine just openiong or modifying some later or some of the sample ones.
Our FRS is on networked location and uses UNC path - I'm assuming this has no impcat.
Many Thanks

After "upgrade" to new firefox, bookmarks didn't transfer. Help tells how to import from another browser but not old firefox. Also my anti virus (latest update) apparently not compatible with 4.0 Can I restore my old version

Question
After "upgrading" to new firefox none of my bookmarks are in new bookmarks help topics tell me how to import from another browser but not from previous version of firefox. Another problem is my anti virus ( most up to date) is apparently not compatible with 4.0 liked the old firefox would never have "upgraded" had I known my anti virus wouldn't work. Can I get old version back

Check with Kaspersky as to what versions of Firefox their programs are compatible with. It is up to Kaspersky to keep their stuff up to date as Mozilla releases new versions of Firefox. And if they are unwilling or incapable of doing it, they should inform their customers of such and maybe refund their customers instead of stringing them along.
http://forum.kaspersky.com/

How do I improve package loading performance in BIDS when I open a package which is imported from another place?

Similar Messages

Maybe you are looking for