How do I instal Omron blood pressure monitor soft wear on my Mac pro when the soft wear supplied only refers to Windows
How do I instal a Omron blood pressure monitor on to my Mac Pro.It came with an installation softwear that is only compatable with Windows.I have contacted Omron and they inform me that it should be possible using Bootcamp.How do I do this.I am using Lion OX.
Basically, the software Omrom uses is made by Microsoft and will only run on Microsoft Windows. There are two ways to run it on your Mac Pro, both require a copy of Microsoft Windows. Option one is to use Boot Camp, which sets aside a section of your hard drive to use for an installation of Windows. Once installed, you can then boot to Windows rather then OS X. The other option is to use something like VMWare Fusion to run Windows on top of OS X. A quick Google search has confirmed that the Omrom software has no issues running in VMWare.
In my opinion, VMWare is a simpler option. But it does require purchasing the VMWare Fusion software as well as a copy of Windows (I think they sell a bundled version of VMWare that includes Windows).
Similar Messages
-
I just installed a 3TB hard drive on an early 2008 mac pro and it is not recognized/not visible. What now?
If the drive is correctly installed on to the sled, and the mounting screws are snug, not tight, and the sled is inserted properly so that all the roof-tangs catch as the sled is inserted, failure to show up in Disk Utility means the drive is not useable.
A Bug in 10.8.4 and later precludes Disk Utility ERASE-ing large drives in Internal bays. Use PARTITION only, and create one new partition, GUID partition Map, Mac OS Extended (journaled) Volume. -
good day all,
I am currently carrying out a blood pressure monitor project. basically it uses the oscillometric method to detect the blood pressure. Currently my hardware comprises of a pressure sensor, instrumentation amp, ADC (pic16f877a) and is connected to the pc via rs232. Currently the voltage readings can be obtained using VISA serial and i can see the waveform. What i need to do now is to obtain specific peaks (amplitude of the peaks will be used to calculate the pressure). How the oscillometric method works isthat the amplitude of change of pressure in the inflattable arm cuff is monitored. As air is slowly released, there will be a sudden spike (when the pulse breaks from its obstruction). The amplitude of this spike is useful for the Systolic pressure. As the pressure is further released, there will be a further increase in the pulse amplitudes and would then start to diminish. The diastolic pressure is when the pulses start diminishing so the amplitude level would need to be measured. I would appreciate any help or guidance... or just simply for someone to show me in the right direction...
Thanks...Hi Lawrence,
Thank you for posting to the National Instruments Discussion
Forums.
You can easily detect the peak of an array of X values using
the Threshold Peak Detector VI. This provides you with the index of the
detected peak from a given set of data. The index can be fed back into an index
array to read the actual amplitude.
Hope this helps!
Abhinav T.
Applications Engineering
National Instruments India
LabVIEW Introduction Course - Six Hours
Getting Started with NI-DAQmx
Measurement Fundamentals
Attachments:
Peak Detector.JPG 14 KB -
Blood Pressure monitoring system using the LABVIEW
i m currently doing a project on blood pressure monitoring which i need to get two values which is the systolic and diastolic in the labview.. but i can't seems to save the two datas as when i try to save, the whole program stops. how do i go about?
Sheenalook at modifide version of your vi
Incorporated a save to file section
Hope this helps
Attachments:
BP(trial)_save.vi 407 KB -
Problem: Microlife Blood Pressure Monitor and Health Vault Connection Center
I have model BP3NQ1-4W. The HV Connection Center does recognize and install drivers when the device is connected for the first time. However each time the device is connected after the initial connection the HVCC prompts me to add
a new device. I could add it as a new device every time I connected it. Each time it is added a device appears in the
Windows Device Manager under the Portable Devices object.
I can work around this problem by
Disabling the Microlife Blood Pressure Monitor device object in the
Windows Device Manager
Connect the BPM device
Ignore the HVCC Add Device wizard
Enable the BPM device in the Windows Device Manager
Is there any possibility that this behavior could be corrected in a new driver or HVCC release?
Thank you.Hello Tom,
There are some models of Microlife BP Monitors that do not connect with HealthVault Connection Center. Did you see a Microsoft HealthVault symbol on the box? I searched for this model number on our list of devices and do not see it on the
list (https://account.healthvault.com/us/en-US/Directory) .Can you please confirm with Microlife that they provided drivers for this model?
Thanks
Tomas
MS HealthVault Support -
i download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.
please help me..
thanksNo one here will help you.
You should definitely ask your question in this forum:
http://forums.autodesk.com/t5/AutoCAD-2010/bd-p/360 -
Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it does not install ang give an Error code 72, it is assuming that I already are using the Creative cloud in 2 computer, but itis no the case, how to solve this situation?
Dave: I did the Microsoft Update two days before this happened, and rebooted as required. I just created a new restore point and lauched Creative Cloud. Now I get the famous white screen:
It just sits and spins (been 10 minutes now).
Fortunately, I saved away this command (which I've had to use 4 or 5 times already):
del %USERPROFILE%\AppData\Local\Adobe\OOBE\opm.db
Unfortunately now, I get this (even after closing the above window):
The process cannot access the file because it is being used by another process.
So I killed everything that said "Adobe" in the task manager and this time, the command succeeded.
Fortunately, the current apps seem to still work. I can't seem to find the "Creative Cloud" app in the applications on my system, but I launched Photoshop CC, told it to look for updates, and got a list of the 5 prgorams that need updates in the Adobe Application manager:
I will proceed with the updates, holding my breath. -
I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?
Get a Virtual Macine software program, Parallels, VMware Fusion or VirtualBox, and install XP in a virtual machine.
You can't install XP in a Boot Camp Partition with Lion or Mt Lion, only Win 7. -
I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way
Go to the site and look for an unsubscribe link. Or, contact the site and ask them to stop.
-
my iPhone was stolen last night and I'm trying to recover all my photos from that phone and get them on my mac laptop. The iCloud photo stream only imported 1,000 photos from my stolen phone. How can I retrieve all of my other photos?
You have to reset the device to Factory Settings in order to restore it from an iCloud backup. You probably want to back it up as is before you do this.
To do the reset after you have backed up the current device, go to Settings>Reset>Reset all Content & Settings. This will erase the device. If you are signed onto iCloud with Find My iPhone turned on, go to Settings>iCloud and scroll to the bottom to sign out of iCloud before you do the reset.
Once you have reset your device, you will set it up like a new phone. When it asks if you want to restore it from an iCloud backup, select the backup you want to restore it from.
Cheers,
GB -
How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
Someone, Please helpHi Allen,
Is there any way to store the back up to Mac and restore after formating? -
Apple Senior tech lady deleted all my external drive data while sorting out other problem. How can I restore all my photos , music etc back to my Mac Pro?(I am so scared, I haven't connected iPhone to sync! Please help)
It was tele tech. I couldn't open my Page Numbers etc. Frist tech chat idiot - following dumping few things in bin, asked me yo upgrade to Yosemite. But the problem still persists. This morning I was asked to do it via telephone and like yesterday, after wasting 20 min, I was put to this apparent Tech Queen ( my foot!). She eventually decided to reinstall Yosemite asked me to connect my external drive while I connected to her. She was moving cursor asking me to move files and delete and I followed her like a dummy. It took 3/4 hours and she called me 3 times once the lengthy process was completed. I suspected from the beginng for the fact that why should be asking me to click all my backup from the very beginning! Eventually she said I deleted... Or someone else or may be my children ! It was a blatant lie. I run my small business from home and I was simply staying in front of the Mac whole day! Children were at school. Then she said I must have used another computer! I only have laptop and the iPad. I will talk to their manager first thing in the morning. In the mean time please let me know as to how can I transfer photos, music etc back to my laptop from my Iphone and IPad .? I am will connect to laptop as I am worried the new BLANK iPhoto may supersede iphone/iPad stuff? Will it? Please let me know. I am not a very tech savvy person. My son who could help me, is in Manchester Uni and Inam in London.
-
i'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?
What is the source & link to this 8 GB kit please?
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547 -
How can you download premier pro when the icon doesn't exist in cloud?[was:pr]
how can you download premier pro when the iucon doesent exist in cloud???
In order to download the software, your computer must meet the system requirements to run the software.
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-premiere-pro.htmlhttp://www.adobe.com/products/premiere/tech-specs.html
The usual reason for not being able to download is that Premiere Pro (and other video apps such as After Effects) are 64 bit only so they require a 64 bit computer and a 64 bit operating system.
If you're running a 32 bit computer and operating system then you will not see the Premiere Pro icon since the software will not run on your computer.
Maybe you are looking for
-
OPEN CALL: Forge Driver Project
Hi, don't know if you did know but there is a driver project on forge which hosts a lot of drivers for the older imaging environements. It was started by me but with the implementation of the newer kernels it got put on the backburner. As Forge will
-
Change the name of the email attachment
Hello, When a form is submitted via email, how can I change the name of the file that is attached? Thanks, MDawn
-
Possible to add a CS4 SubForum @Photoshop?
http://www.adobeforums.com/webx/.ee6b366/ Would it be possible to re-structure the Photoshop forum, to add a SubForum for CS4 questions? Such as... Ask CS4 Questions Here
-
I bought my iPhone in Saudi Arabia but am now in Australia with an Australian SIM. How can I add FaceTime to my phone?
-
Good morning, I am puzzled by this in rebuilding standby process. I remember see this: Before run "rman dup for standby -" you do "ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2=defer.." in primary db. After finish RMAN dup and start MRP process you do "A