How do i install new commands to use at the command line

i want to use macports but get the message command not found

Information on installin MacPorts can be found here.
There appear to be a package specific to Mountain Lion

Similar Messages

  • I have replaced my XP with a new Windows 8.  How do I install Elements 8 I used on the old PC please

    I bought a new Windows 8 PC and want to get Elements 8 from my old XP installed on it.  I bought it online and still have the installation code but dont know how to install it.

    No harm in trying provided you've got your Elements 8 serial number.
    Download the trial version from http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
    Follow the Very Important Instructions on that page first BEFORE you click the download link.
    Enter your serial number to license it on your computer.

  • How can I install new windows on NB200-10z without a CD drive?

    Hi,
    I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
    I would like to do a recovery, but it also doesnt work.
    I know there is a shortcut like press the 0 button when the laptop is starting up.
    With this shortcut you can start the recovery to reset the software.
    But when I press the 0 button it gives me an error.
    So I think the recovery drive/partition is lost.
    How can I install new windows on this minilaptop without a CD drive?

    I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
    The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
    Before you begin, you will require the following:
    USB Flash Drive (4GB minimum)
    Windows 7 ISO Image file
    UNetbootin
    Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
    Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
    Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
    Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
    Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
    +Message was edited: link has been removed+

  • How do I install new themes for keynote purchased throught the app store?

    I have downloaded some Keynote themes fron a site but I have no way (that I can see) to install them. I've done extensive googling and I always find instructions that say that I have to add the downloaded themes (.kth files) into the ~/Library/Application Support/Keynote/Themes folder. However, I have no such directory.
    I purchased Keynote via the App Store. Could this be the reason why I don't have this directory on my hard disk? How does one install new themes then?
    Thank you.
    While I am at it and since there must be a lot of Keynote experts around, I'll ask another question about a problem that is driving me crazy. I'm one of those thousands of new converts and I have a lot of old PowerPoint files that took me a lot of time to create. I'm trying to import them into Keynote but some of them are giving me trouble. The problem comes when I try to change the theme (I just want to change the background). When I have complex slides involving many objects, if I change the theme all these objects abandon their original positions and everything becomes garbled. I think this has to do with the aspect ratio of the slides but I haven't found any way of fixing it. No matter what size I choose in the Theme Chooser, the result is the same.
    I would really appreciate any help you people can offer with any of these problems. Thanks in advance.
    JM

    OK, I'll answer myself since I found an answer to my first question. It was right here in the forums. I'll post a link to it in case someone reads this thread looking for an answer:
    Using 3rd Third Party Themes - The Manual Way to Import
    Now, if I could just find an answer for my second question...
    JM

  • How to uncheck "install new versions automatically" from INTERNET EXPLORER 11 from SCCM 2012

    We have deployed "Internet Explorer 11" application  through SCCM 2012 console .the deployed application was customized using "Internet Explorer customization wizard 11" tool.
    issue:
    we are getting  "install new versions automatically" check box as checked
    when we see from help about  "about internet Explorer"
    seeking solution:
    how to uncheck "install new versions automatically" check box from SCCM 2012 console.
    please let me know if we have any solution for this instant
    thanks,
    Gc.Hanumareddy

    Hi,
    For option: "install new versions automatically", we can simply prevent it via GPO or registry (the registry entry can also be deployed via GPO)
    Computer Configuration - Administrative Templates - Windows Components - Internet Explorer - Install new versions of Internet Explorer automatically
    Or
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main]    
    "EnableAutoUpgrade"=dword:00000000
    Yolanda Zhu
    TechNet Community Support

  • How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

    How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
    I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
    I can't install using DVD R/W because it's not working.
    Please help me.
    Thank you.

    unlocked by myself
    thanks

  • How do i install new office software?

    how do i install new office software?

    More information would be helpful, such as hardware and operating system.
    Allan

  • Macbook pro mid 2006 (Intel Core Duo) how can I install new OS ? I cannot update the 10.6.8 and new software doesn't work anymore

    Macbook pro mid 2006 - how can I install new OS ? I cannot update the 10.6.8 version and new software doesn't work.

    A Core Duo Mac can't be upgraded past 10.6.8.
    (123371)

  • How to create a new excel file using Excel Destination when Destination file not exists.

    how to create a new excel file using Excel Destination when Destination file not exists.

    Just need to set an expression for excel connectionstring and set delay validation to true and it will create it on the fly.
    The expression should return the full path with dynamic filename in each case.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • HT1338 Can anyone tell me how to find what OS I'm using on the Mac? Tiger or Leopard? Also, how do I update from 10.6.8 to the latest version?

    Can anyone tell me how to find what OS I'm using on the Mac?
    Tiger or Leopard?
    Also, how do I update from 10.6.8 to the latest version?

    Go to the Apple menu and select "About This Mac". You will get a window similar to this one -
    You current OS X version number will be shown as I've marked.
    OS X 10.4.x is Tiger, 10.5.x is Leopard, 10.6.x is Snow Leopard, 10.7.x is Lion, and 10.8.x is Mountain Lion.
    Whether or not you can go to the latest OS X version depends upon your hardware -
    You will need to purchase the retail set for the OS X version you want; there is no pint in getting and installing any intermediate versions. Once the retail version has been installed, you can update it to the latest release for that version via download updater.

  • How can I see how often and where an image is used in the site?

    Just realized the post appeared twice as at first sending I
    got an error page (contains no data...).
    So, please do all answer to the other post, so that all
    replies get collected at one post only.
    Hello,
    please excuse my maybe dumb question but converting from
    GoLive I am still trying to find several practical effective
    workflow features in DW ...
    1. where in the sitewindow/assets or files panel can I see an
    indication at each image if and how often it is used in a site?
    2. and where can I see/check on which pages it is used?
    Thanks in advance for guiding me there ...
    bye,
    Beate

    > How do DW users know how often and where an image is
    used on the site
    > then?
    I'm not sure what the benefit is of knowing how often an
    image is used, but
    a search for the image by filename would do the trick.
    And just so you'll know, this is a peer forum, not an
    official communication
    vehicle to Adobe. We are all just users here, not Adobe
    employees.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "beatrice" <[email protected]> wrote in
    message
    news:[email protected]...
    > OK. I sent the below feature request.
    > How do DW users know how often and where an image is
    used on the site
    > then?
    > always doing a find/search?
    > in GoLive there was an simple window where all the files
    a page consisted
    > of
    > were listed plus all the files that were pointing to
    that page. such,
    > without
    > having to open a page links and image and componentes
    etc. could be
    > changed via
    > point&shoot.
    >
    > Couldn't you all think of this a being great and helpful
    and making site
    > management easy? Then send in a feature request as well,
    please.
    >
    > ...............
    > How can one know by the assets or files list if an image
    is used at all on
    > the
    > site?
    > and how many times? and on which pages?
    > This is very useful to know especially in larger sites.
    > e.g. an image should get changed on one page, now it
    would be very good to
    > see
    > if when it was used on other pages as well if it would
    make still sense
    > there
    > when changed.
    > as DW can update files (when e.g. an image name gets
    changed) there is a
    > way
    > this is already recorded. why not take this records and
    send this back
    > into a
    > list/column in the files panel to indicated that the
    image is used and
    > how
    > many times.
    > plus to have another window that can display all the
    pages the image is
    > used
    > in.
    > so one could click through all those pages and open them
    to check the
    > image
    > there.
    > in GoLive that feature was called 'In and Out links' and
    one could see a
    > page
    > in the middle and left and right from it many
    branches/lines at which ends
    > the
    > filenames were visible used in that page.
    > so one e.g. could also point and shoot from this list
    and change a file or
    > image or component simply by point and shooting to the
    files panel without
    > having to open the pages.
    > These features were so practical for an effective daily
    workflow that I
    > don't
    > understand why they haven't been put into cool DW yet.
    Please, please do
    > so in
    > the next release. I can test it thoroughly if you need
    testers for it.
    > bye,
    > beate
    >

  • How do i install lightroom cc - i have downloaded the application but lightroom  5 still opens instead

    how do i install lightroom cc - i have downloaded the application but lightroom  5 still opens instead

    Lr5 will install on your computer just fine and the installation will not be "mixed up" with Lr3.
    Why do you think it's a mix of both?
    In case you are wondering because you sometimes see a different Basic panel in Lr5 and sometimes not, this is dependant on the Process Version (PV) of the image.
    With PV 2010 or 2003 Lr5 will display the same Basic panel (the same sliders) as Lr3; but when you update the photo to PV 2012 - or for newly imported photos - the Basic panel and the sliders will change to the new version.
    There is a flash icon below the histogram for images that don't have PV 2012. Naturally you can see and change it also in the Camera Calibration panel / Process version.

  • I am running Leopard 10.5.8 and want to partition Windows 7. The windows 7 I have is not a cd, I downloaded it. How do I install if I don't have the Windows 7 cd AND I don't have a PC to create a USB or CD?

    I am running Leopard 10.5.8 and want to partition Windows 7. The windows 7 I have is not a cd, I downloaded it. How do I install if I don't have the Windows 7 cd AND I don't have a PC to create a USB or CD?

    Thanks Fred. So I bought Snow Leopard, also installed ALL updates to now 10.6.8
    Problem: when I start my Boot Camp (3.0.4) it does not let me use a USB. I have been reading your article that I can be on a later Boot Camp but somehow Apple is not leading me where to actually download this Boot Camp Assistant upgrade.
    Keep in mind: every update on Apple about Boot Camp has been .exe which is useless to me since I do not have Windows installed.

  • How to add a new column (Project Number) in the action items table under NPD Module?

    There are two projects with same name and created by same person in NPD.
    So when it is displayed in "Action Items" table, It looks similar.
    To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
    So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
    Please do the needful.

    There is no out of the box configuration available to add columns to NPD action items.   As always we welcome enhancement requests. 
    Thanks
    Kelly

  • HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

    iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.  I've seen reference to the  "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app.  I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for.  I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air.  Any help would be greatly appreciated.

    If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

Maybe you are looking for