How do I launch an application i.e iMovie.app via console? It is purely for self interest nothing else

The reason I want to know is if I were to ssh into another mac on my home network via terminal, Would I be able to launch an application like iMovie.app for terminal, I tried however maybe my syntax was not good. from /Application folder in terminal I typed iMovie.app and pressed enter. This did not work for me.

if I were to ssh into another mac on my home network via terminal, Would I be able to launch an application like iMovie.app for terminal
You can do the above, or use the 'open' command, but it will just display on the Mac you are ssh'ed into
open -a iMovie
You can start a Screen Sharing session using
open vnc://address.of.remote.system
You can open a web page using
open http://url.of.web.page
You can open an image using
open picture.jpg
open image.png
etc...
You can open TextEdit session using
open file.txt
open file.rtf
Actually opening any file that has an application associated with its .typ field can be done using the 'open' command.
Message was edited by: BobHarris

Similar Messages

How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line ?

How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line, on windows ?
firefoxe... -option? <addon name>?....?

Does opening this page help: <b>about:addons</b>
*https://developer.mozilla.org/en/Command_Line_Options

Adobe Air Initiates the wrong launch Image on iPhone 6 - Possible App Rejection by Apple Review Team for all developers

I've opened a bug for this issue as well. I want to ask if anyone experiencing the same issue and has found a workaround. Basically Air Runtime is picking up the wrong launch image when launching on iPhone 6. It defaults to [email protected] instead of the [email protected] iOS 8 picks the correct image but Air Runtime does not. Here is the link for the bug. If this is confirmed, this could result in rejection for all the app developers who optimized their apps for iPhone 6 . It is hard to catch this bug in release mode since the Air Runtime loads pretty fast and it occurs when you device is slow or doing something in the background. You can see it easily on iOS simulator or debug mode. We tried everything for a workaround but we failed.
Bug#3831747 - Adobe Air Initiates the wrong launch Image on iPhone 6 - Possible App Rejection by Apple Review Team for a…

Apple recommends the storyboard/xib option but you can still use launch images as assets in your root. When you open a new project in xcode you can look at Contents.json and see the naming conventions they use for iOS8. We grabbed the new naming convention from here. Also setting up in the application xml the UILaunchImages key works too. Please see the below example. It would be a better solution if Adobe Air refers to xml/info.plist values that the developer sets instead of hard-coded naming conventions.
<key>UILaunchImages</key>
<array>
      <dict>
          <key>UILaunchImageMinimumOSVersion</key>
          <string>8.0</string>
          <key>UILaunchImageName</key>
          <string>Default-667h</string>
          <key>UILaunchImageOrientation</key>
          <string>Portrait</string>
          <key>UILaunchImageSize</key>
          <string>{375, 667}</string>
      </dict>

I've upgraded my app via iPhone and already paid for it but noting have changed. Who am I suppose to contact with. and how

I've upgraded my app via iPhone and already paid for it but noting have changed. Who am I suppose to contact with and how?

Contact the developer of the App.
Just because an app is updated does not mean it should visually change, the update could simply be bug fixes.

How do I launch the application after its downloaded?

I just downloaded photoshop CC and illustrator CC and i cant figure out how to open them to start using them. I press the link after its downloaded and it just takes me to the website were it says download trial.

Hi AMEspinoza9208,
As suggested by station_two navigate to Application and look for software or you may simply write the software name on the spotlight and application will show up.
Regards,
Romit Sinha

How to edit a WFP application through a Visual Basic command console?

Hi, I'm currently working on a little project of mine, based mostly on a Visual Basic command console, and I've had the idea to add a console-controlled Windows Form.
What the console will eventually do is run, say, 1000 x 1000 [(1,1), (1,2), (1,3)... (574, 349), (574, 350)...] items through into a list, and then these million-or-so entries will use their assigned values as the x and y co-ordinates for
the form, as well as little bits and bobs that will be added as I go along.
Right now, the thing on my mind is this; How do I make, or access, or run, etc. a form, then load this code into it? I've been heading down some reference path with dependents and other stuff and I don't think it's going to carry me anywhere unless I ask
the question directly.
The main plan I have in mind is being to access the controls that a Windows Form has, using the VB console, e.g. Form1.Shape.AddRectangle (x,y) or something.
If this is even possible, which I'm starting to doubt to my dismay, could you give me an absolute, and I mean that from top to bottom, every aspect fleshed out, preferably on the assumption that I don't even know what a file is, detailed walkthrough?
Because I don't want to ask questions to the answers to my question.
Thanks :)

Items and bits and bobs doesn't have much meaning to me.
If you want to create a Form from a Console app that is simple. Prior to launching the Form provide whatever you want to it I suppose.
Whatever you attempt to provide to the form may need references added. Therefore you can research that on your own using the
MSDN Library search engine which should keep anybody else from having to perform "top to bottom, every aspect fleshed out, preferably on the assumption that I don't even know what a file is, detailed walkthrough" since if you don't know
anything you should be attempting to learn. And if anything is outside your scope of knowledge that you need to know to do whatever you want to do you should research and learn that. Not ask anybody else to do it for you or provide you baby step instructions
for doing so.
It's possible trying to provide 1000000 items and bits and bobs to a form will fail or your app may not have the memory allocated for doing that. And it's probably a poor idea too.
Option Strict On
Imports System.Windows.Forms
Imports System.Drawing
Module Module1
Sub Main()
Dim f2 As New Form
f2.Left = 10
f2.Top = 10
f2.Text = "Test Form"
f2.Width = 241
f2.Height = 271
Dim PB As New PictureBox
PB.Width = 225
PB.Height = 225
PB.Left = 0
PB.Top = 0
PB.Image = Image.FromFile("C:\Users\John\Desktop\Picture Files\CrossBones PNG.Png")
f2.Controls.Add(PB)
f2.ShowDialog()
Console.ReadLine()
End Sub
End Module
La vida loca

How can i install a windows version 8 on a 3 year old iMac 27 (only windows and nothing else not via bootcamp = result shut be a clean iMac with windows - no

When i now had recieve a brand new 27" imac, i had a 3 year old model 27" imac which my daugter want to have BUT i should be as a clean Windows thing -
so how to change the computer to a clean windows 8 computer with no apple programs in and no Maverick or other lovely programs?
I had seen on the net that a lot of peoble had windows with bootcamp - i am not a computer tecnician and when i try - i end op with a machine with could nothing - no mac programs - no office pack - no adobe programs - so i had to start op again with a new harddisk.
Some of the problem is that i dont understand the thing which bin told when you go to bootcamp for a user of mac's since the model was the "classic" and we make newspapers on them - so i want and easy way to have and mac computer for my self (the new one) and let my daugter have a beutiful imac with windows on.
dont begin talking about parrelles i had try that, results it had a windows 7 which cant be updated, apple dont support that and microsoft doesnt so - help me
regards
Chevron B50

If you don't want Boot Camp and you don't want a virtual machine, go buy a Windows computer.
Both Boot Camped Windows and Windows running in a virtual machine work well. Your issues are because of your lack of knowledge or understanding, not because Boot Camp and virtual machines are poor products. Universities, large and small businesses, home users, etc. use virtual machines to run their operating systems.
Your statements about Boot Camp and Parallels are not the experience of thousands of users.
Either find someone who is knowledgeable about running Windows on Apple computers to help you or buy a Windows computer. Believe me, if you find a way to install only Windows on your Apple computer without using Boot Camp or a virtual machine you will have more problems than what you have already experienced.

Cannot see application in workspace (Created App via HFM client not BPMA)

Dear All,
I have some trouble with my 11.1.1.0 installation. After installation and configuration, I try to goto workspace to find consolidation administration and cannot find it. Then I tried to create an app using the HFM client but after granting all security to the user account, the application will not show up in workspace.
Is there anyway to un-register the HFM installation from Shared Services and Workspace and re-register the HFM installation. There is an option in previous Hyperion version 9 but in 11.1.1.0 there is no such option under the EPM configurator.
Can I fix it or it's pretty much a re-installation. Please give me some advice
Thanks in advance

Tried uninstall HFM and reinstall again.
Ran EPM onfigurator and everything seem to processed ok.
I can log onto Shared Service and see that I have created an HFM Application and be able to provision users to the application.
But when I log onto Workspace, it just won't show anything related to HFM, the application is not on my application list and under "Classic Application Administration" only Planning shows up and no HFM.
I have Apache running on 19000 and IIS running on 80.
Any idea what I can do to trouble shoot?
I tried to create 2 apps, I using http://compter:19000/hfm as security url and 1 using :80/hfm and neither makes any difference.
Edited by: Redcomet on Oct 15, 2009 7:42 PM

How to expose Hibernate 'non' conventional beans into flex apps via remoting

I am relatively new to the flex world. I am from the
Spring/Hibernate world.
In Hibernate, the POJO object or domain object , or simply
beans that you use to persist you object into the database does not
have to follow the bean definition/contract, i.e: public default
constructor with getter/setters. There are good reasons behind
creating those kind of 'hibernate beans' (I will call them that way
for lack of a better name). In fact, only defining a one-parameter
constructor (i.e. omitting the default one) guaranties you that
your client cannot invoke your API without that needed parameter.
Likewise, exposing only the getters for some private member
variables (without the setters) make sense when you don't want that
variable to ever change, etc....hibernate can do all that using
cglib, etc....
Now, my understanding of Flex and how remote services work
(from what I could see in all the samples around about
hibernate/spring), is that your java server bean get proxied
'dynamically' or 'statically' if I wish into an Actionscript class
object according to the rule: "values found in public bean
properties with get/set methods and public variables ", therefore
my public getVariable() from my 'hibernate' bean does not get sent
back.
This is creating me tons of problems, because the server API
already exist and we already have a JSF implementation using
it....Changing into flex is just my own initiative to prove that we
can get better UI...
What is flex/BlazeDS solution for fixing this case?
One solution that comes to mind (not very bright, but should
work) is to build a plain java bean object for each of these
'hibernate' beans to ensure the translation on both side between
the 'hibernate bean' and the 'expected' bean from flex. From the
server to the client, It would to copy the content of the hibernate
bean and return those 'proper' beans back to flex. On the way out
(from the client to the server), it would have to recreate the bean
as exposed on the server before sending it to the server).... It's
probably not the best solution, especially considering that
eventually as some point, I will need to define another set of
those object, in flex, using actionscript (I think these are what
you guys call VOs) in order to do strong typing in
flex........becomes very tough to manage!
Any input would be valuable.
Thank you,

Hi Saket,
By 'not really complete' I'm assuming (hoping) that some work has been done on this already. Our project requires the use of custom assets, so it's very important that we get this functionality running as soon as possible.
Any help, unsupported or otherwise, would be great. Feel free to email me any details if you'd prefer not to post anything public on the boards.
Cheers,
Kristian

Bought an app....been installing for over an hour...how do you stop or delete?, Bought an app....been installing for over an hour...how do you stop or delete?

Bought signature app......been installing for over an hour........how do I stop or delete app. Holding app button does nothing

Try downloading the app with iTune and sync it to your iPad.

Maps application "searching for satelites" and nothing else......PLEASE HELP!

Hi
when i want to use the Maps application, nothing happens apart from it saying "searching for satelites". My friend stood next to me with his 8900 and it found it perfectly. We have got the same BB, the same network provider (Orange) and our phones are only about a week apart TO when we got them.
I switched on the GPS navigation but still nothing happens
Please help, this is really annoying me!
Cheers

Your DisplayContainer constructor calls showSplashPanelAndExit()
which will cause the application to end because of System.exit(0). Is
this what you intend?
(When you post code use the "code" tags described here:
http://forum.java.sun.com/help.jspa?sec=formatting Type [code] at
the start of your code and at the end. That way the code will
be formatted and readable.)

How can I Launch a Java application that I have written using an icon

I have just finished writing a Messaging system like Ms Outlook written completey in Java. To run my application , I would normaly type: java and then the class containing the main method eg java LogonFrame.
How can I launch my application by just clicking on an icon ?.
How can I also package and install this application the way most conventional application are packaged and installed. Do we have a sort of "java Installer" ?.
Thank you.

Just make a .bat file. Open notepad, type something like
@echo off
javaw -classpath %~d0%~p0 Package.MainClass %1
Now make a shortcut to this file. Rightclick the shortcut and select start in "minimized". Thats it...
Nille

How do I launch Adobe

how do I launch Adobe

What application do you mean when you say "Adobe" - there are many different ones? What do you mean when you say "launch"?
If you are having a problem getting something to work you should provide specific details that describe the problem.

How to display the entire application in two different languages in apex

Hi,
How to display the entire application in two different languages in apex...
For example i need to display each item in both English and Hindi..
To achieve this initially i have the select the language otherwise the item label alone ll be displayed in both languages ...
Anyhow how it ll be apex is it possible
Regards,
Pavan

Hi pars,
http://www.packtpub.com/sites/default/files/1346-chapter-6-creating-multilingual-apex-applications.pdf?utm_source=packtp…
In this link also i struck in
In page 10 of that document
The application is now ready to be translated. Everything is in place to run it in any language imaginable.To ca ll the application in another language, change the URL of your application to the following:
http://yourdomain:port/pls/apex/f?p=&APP_ID.:&PAGE_ID.:&SESSION_ID.:LANG:NO::FSP_LANGUAGE_PREFERENCE:nl
This example will call the chosen page in the application and show it in the Dutch language instead of in English. To select another language change the property nl at the end of the URL to your desired language code.
Thanks alot for ur suggestions.kindly provide more inputs..............

How can I get an AIR application to a video output via DeckLink card with alpha channel?

Hi there!
Anybody knows how to get an AIR application to a video output via DeckLink card with alpha channel?
The reason is because we want to develope tv show games with air.
Thanks.

See if these have iMac Nvidia drivers:
http://www.laptopvideo2go.com/drivers/

How do I launch an application i.e iMovie.app via console? It is purely for self interest nothing else

Similar Messages

Maybe you are looking for