How do i link an object to a bone point?

Hi. I'm pretty new to AS and usually use flash for some animation.
now this is what i want to achieve: a snake that consists of a shape IK as a tail and a Movieclip for the head to be able to do some eyes and mouth animation.
Is there any way to link a Movieclip to a bonepoint of an existing bonestructure in a shape-IK?
I hope this makes sense to anyone
Thanks
Dave

Look at forum post "Table mapping (KODO 3.4) using XDoclet"

Similar Messages

How do I link an object on the stage to an external class file?

I have a dynamic textfield called neighName on my Flash
stage. I also have a movieclip that I call a region on my stage.
When I mouseover the region, I want a word to display in a little
popup *and* I want some text to display in my textfield. I have an
external .as file for handling the region. I can make the code
"see" my region, but I can't seem to make it see my textfield,
although no errors are being thrown. Help, anyone?

My bad--I had set the textfield.visible to false. Apparently,
I need more coffee.

How to create a system object in portal that points to a web dispatcher

Hi,
How do we create a system object in the portal for a web dispatcher? The web dispatcher in turn points to an ECC system. The path for communication is EP>Web Dispatcher>ECC
Regards,
Sridevi

Hi,
Connection test for the following succeeded:
1. SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (mtw02spwp02:80)
5. The host name mtw02spwp02 was resolved successfully.
6. The Web AS ping service http://mtw02spwp02:80/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/bsp/sap was obtained successfully.
2. ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (mtw02spwp02:80)
6. The host name mtw02spwp02 was resolved successfully.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/gui/sap/its/webgui was obtained successfully.
Next test for SSO failed:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Regards,
Sridevi

BUS2089 for travel expense claim. How can i link it to portal?

Dear Expert,
I had created a customize object from the standard BUS2089 and named it ZBUS2089 and i have a workflow that trigger based on the ZBUS2089 object created.
My question is how do i link this object to my travel expense request. I want when the employee click on submit on the portal side, instead of triggering the standard BUS2089, i wanted to trigger my customise object ZBUS2089.
Thanks
Regards,
Bryan
Edited by: Brian Lee on Mar 25, 2008 3:23 AM

Hi Kappy,
The situation is hard to describe it seems. They say a picture is worth a thousand words, so I'll show screen shots....
Clicking on the Desktop icon does not open a finder window but rather opens a program. The problem seems to be that the "desktop folder" in the finder is not recognized as a "folder" but rather is listed as "anything".
Here is what the folder should be normally. (shot taken from another account on the same computer).
Solutions tried to fix this problem:
1. tried to delete the Desktop icon, and to pull it off to the trash and also to move the icon somewhere else. The icon doesn't change.
2. I've taken the icon off by removing it in the finder settings. When re-checked, the problem stays the same.
3. I've deleted the finder.plist file and the sidebar plist file in my account.
4. I've repaired permissions.
5. I've tried to re-assign the link in the info pane - associating the icon with the "finder"
I have three accounts on my computer. My main account is the only one affected by this problem.
Anyone who might have a solution, I'd love to hear your ideas!
It looks like the "kind" needs to be changed from "anything" to "folder" but I don't know how to do that.
Thanks for your help!
Douglas

How can i link from IR to ID

hi , all
while configuring objects in ID , how can i link design objects from IR into ID.
thanks & regards

Hi,
>><i>while configuring objects in ID , how can i link design objects from IR into ID</i>
--> In the receiver determination u will be specifying
1 .Message Interface ( Has the Message Type and Message has the Data Type)
2. Interface Mapping ( Has the Message Types and the Message Mapping to be Done).
--> Also u import the ccBPM in the in the Integeration Process of ID
By these steps the design objects of ID is linked to IR.
Regards
Santhosh

Drawing object on the intersections point of 2 lines.

hi guys, im very new in actionscrip , please give me some guidance.
i'm doing this project , about 2 lines intersecting each other(the 2 lines are not always on the same position) . i try to find the intersections point using collision detection method but how do i place an object on the intersections point?
if(line1.hitTestObject(line2)) // so this is how we find the intersection point but we do not know how to draw/place an object on the intersection point.

then it's easier to calculate the intersection algebraically:
function intersectionF(x1:Number,y1:Number,x2:Number,y2:Number,x3:Number,y3:Number,x4:Number,y4:Number):Array {
     if (x1==x2) {
          if (x3==x4) {
               if (x1==x3) {
                    return ["line1"];
               } else {
                    return [null];
          } else {
               // line 1 vert, line 2 not
               var m2:Number = (y3-y4)/(x3-x4);
               var b2:Number = y3-m2*x3;
               return [x1,m2*x1+b2];
     } else {
          // line 1 not vert
          if(x3==x4){
               // line 2 vert
               var m1:Number = (y1-y2)/(x1-x2);
               var b1:Number = y1-m1*x1;
               return [x3,m1*x3+b1];
          } else {
               // line 2 not vert
               m1 = (y1-y2)/(x1-x2);
               b1 = y1-m1*x1;
               m2 = (y3-y4)/(x3-x4);
               b2 = y3-m2*x3;
               var x:Number = (b2-b1)/(m1-m2);
               return [x,m1*x+b1];

How do I disable linked smart-object auto-update/refresh?

Working in the CC3D features, I am constantly making changes to my bump map. Every time I step-backwards, or make a significant change to the bump texture (smart object?), CC auto-saves the layer. This specific file is a very very large document (3 gigs in the bump texture layer alone), and the 3D layer has lots of lights and is very complex. This auto-refresh/update really bogs down the time that it would take me to make my changes. I have a very fast machine (I know it's fast, I dont need to list my specs), and I have all shadows disabled.
How do I disable linked smart-object auto-update/refresh?

If you do not like a feature like smart objects there is nothing forcing you to use it. Use some other features to do what you want. Please don't ask Adobe to introduce bug into smart object support.
You could work on your bump maps textures in external files. When your done some time in the future you could edit your project with the smart object layer and use replace smart object. Only then will all smart filters be applied to the smart layer with the replaced smart object.
Or if by CC Auto save Layer you referring to CC Generate feature you can disable that feature.
I have no idea what your referring to when you write "CC auto-saves the layer" being a feature. I know CC Generate will write layers out as web files but that more a Web feature then a 3d feature. Where do you see your layer being saved?

Motion Tracking: How to link a object which is not the tracked one?

Hello,
I have a video, its a landscape and the camera is moving from left to right. I want a flare appearing on the right side. There is one point which is always in the picture, I used this point to track the motion.
But the problem is, when I want to link optical flares with the tracking point, the flare is always ON the tracking point, but I want it a little bit more on the right side...
How is it possible to link a Object which is not exactly on the tracking point?

Usually you would apply the tracking info to a null and then use an expression to tie the position property of whatever you are trying to attach to the null with a simple expression. If you need update the position then you can either add value + to the front of the pickwhip generated expression or, and sometimes this is best, add a second null, parent null 2 to null 1 and then use the a layer space transformation expression on the position property of your effect. The expression looks like this:
p = thisComp.layer("Null 2");
p.toComp([0,0,0]);
If I did not if I did not accurately understand the problem then please post a screenshot of your project with all of the properties for the layers in question revealed.
Here's what a project would look like:

How to bind Links Detail Button to an object?

Hi,
As per the WebCenter Dev Guide, we can create link from "Any object to which you bind the custom JSF components, such as the Links Detail Button".
How to bind Link Details Button to an object?
TIA

maple_shaft wrote:
Each object has a unique id associated to it. One can retrieve that id string from an object by calling the toString() method, as long as this method hasn't been overridden from its default behavior.and if it has System has a method to help you.
But it is not quite a unique id. It might be, but a different JVM could implemented it as "return 1" and it would still technically satisfy the contract.
As much as is reasonably practical, the hashCode method defined by class Object does return distinct integers for distinct objects. (This is typically implemented by converting the internal address of the object into an integer, but this implementation technique is not required by the JavaTM programming language.)

How do you update the location of linked smart objects?

The new linked smart object feature was a low-key feature but it's fundamentally changing our workflow for the better!
Quick question, is there a way to update the paths to linked smart objects or will Photoshop work it out? I can't see a links panel under WIndow or file so am not sure how you do it sorry.
I'm about to edit these files at home and want to make sure Photoshop can find the links - as well as find everything when I copy it all back to the server and work.
Cheers
ben

Yes, the linked smart object can be either raster or vector, but they will be placed as raster images, just as the embedded SO are. SO can be embedded or linked to an outside file. Edits to the original will not update in the original until you select "Update modified content from the menu" when you reopen the file that has the place SO in it. otherwise it will update when you save the linked file. Yes, there still is an advantage to having an embedded SO. You may not want to maintain the links - send a file off and forget to include the linked files. You may want to alter the SO, but not the original file.
Ah, thanks. But does this mean that raster and vector smart objects can EITHER be located within the Photoshop file (as they have been since their advent) OR linked to an external file?
And if so,
1. Can this linked file be either raster or vector?
2. Do edits to it automatically update the Photoshop file?
3. Is ther any longer any advantage to having the smart object data stored within the Photoshop file when it can be linked?

How to access the LOB objects through database links??????????????

How to access the LOB objects through database links??????????????

Hi
See:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:52297289480186
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:5322964030684
And you also might want to get a new keyboard, your '?' seems to be stucked....

How to (bulk) link objects in the FIM MA to metaverse objects

Is there a way to link / join objects which still exist in the FIM MA CS with objects in the metaverse?
Thanks
Mik

Hi Mik,
in FIM, you can configure joiner to perform your task.
More details here : http://technet.microsoft.com/en-us/library/jj572799(v=ws.10).aspx / http://social.technet.microsoft.com/wiki/contents/articles/1881.how-to-implement-joins-and-data-matching-in-fim.aspx
Regards,
joris
Joris Faure

How IT Resource and Resource Objects are linked?

Hi All,
I am new to OIM product and learning the basics. I have 2 questions.
I am not able to figure out how an "IT Resource" and "Resource Objects" are linked?
We always link "Resource Objects" and "Process Definition". How "Process Definition" picks the values provided in "IT Resource"?
Thanks in Advance
Jatin

Hi
I don't think "IT Resource" and "Resource Objects" are anyway linked with each other.
"IT Resource" is something where you specify all the resources in the system which are not meant to be provisioned to users. Like proxy server or Email server in your organization.
"Resource Objects" is a place where you define all the resources that you provision to users.
This is my understanding, which might be wrong. I think someone more experienced user can give better answer to this question.
-Kiran Thakkar

Button Link to Object Standard.

Dear All.,
Now I have a problem with button link to object stanbard (17 is Sale order object).
I have to use button link and Editbox on the new form, then I set button link to this editbox and set LinkedObject=17 in screen painter. I have run this form i select Sale Order document Number on this Editbox and i click button link to sale order that show data following my selected.. but it can't not open sale order and alert message "You are not permitted to perform this action [Message 200-30]".. so how can i set permitted to perform this action. pls help me...
Thanks,
Sivhour.

Hi Prasan,
Authorizations are set in under the Administration System Initialization Authorization General Authorization.
Regards,
Vítor Vieira

Convert an embedded smart object to a linked smart object

Hey guys,
love the new "linked smart object" functionality. However, I can not figure out how I can convert (or export) an existing embedded smart object to a linked smart object.
I have a huge photoshop file with several embedded smart objects that I would like to break down into a lightweigt photoshop with with links to the varios smart object photoshop files.
Is there any way to do this?
Thanks,
Philipp

Thanks a lot guys.
I am just now putting a document together with linked smart objects and I'm noticing that the file size of the PSD file still increases quite a bit. I thought the hole point of this was to have lightweigh psd files?
I currently have 11 1920x1080 linked smart object files in the PSD and the file size is already at 140MB. Any ideas why this is happening?

How do i link an object to a bone point?

Similar Messages

Maybe you are looking for