How do I listen to a JComboBox selection?

Hi
What listener is to be added in order to get an action only when an item is selected?? The ActionListener and ItemListener dont seem to behave rationally. I would like to know if there's a way to catch an action when an item is selected from the combo box.
Thanx in advance.
regards,
Giridhar

Action listener should fo the trick, in what way is it not behaving rationally?
Graeme

Similar Messages

  • How do I listen to the selected area I want to cut (b4 I cut it) so I know my timing is right?

    Trying to make a clean version of a song. Once I select the area I want to cut, how do I listent to the shaded part of the song I have selected before I cut it? I don't want to cut the part that is approximately the area. I want to be sure b4 I delete it.

    There's no way in GB to listen to just a selected region. You will always have to move the playhead to the starting point of that region and press play. However, if you double-click the region and look at its waveform in the finder, you can see very exactly where the sounds start and end, that gives you a very precise option to split and cut your regions.

  • TS5181 How do I listen to a local radio station KQED???  It is no longer listed when I select 'radio' !!!

    Apple seems to only allow me to listen to their pre-selected radio choices now.  Where is the listing of existing broadcasts???

    do they have an adapter that doesn't require that it be plugged into the car, just the phone.  Also if they do what is it called and where can I get one.

  • JComboBox selected value

    Hi,
    I have a JComboBox and I need to be notified if the selected item (or index) has changed. How can I do that?
    Thanks a bunch

    Use the addItemListener() method and add an item listener to the JComboBox. This will tell you when the selection changes.
    Mitch Goldstein
    Author, Hardcore JFC (Cambridge Univ Press)
    [email protected]

  • How Can I listen to the line-in on my T400?

    When I am at my desk, I've always had my satellite radio plugged into the line-in on my computer so that I can listen to it through the same speakers.  With my new T400, I have the radio's output plugged into the line-in on the Advanced Dock.  I know that it's getting a signal because if I record with Microsoft Sound Recorder, it records the radio.  
    How can I listen live to the signal coming into the line-in?

    You can thank Microsoft for this one.  They disabled the pass-through ability in Vista. Apparently too many people complained about feedback issues when trying to use webcams or VOIP programs and didn't know to mute the Line-In on the mixer.  It took me forever to find how to correct it.
    The following will enable the input sliders in your playback devices so audio pass through works without having to run through an application like it worked in XP. Remember, always backup your Registry just in case. I had to create new Keys for filter and SpeakerHp but yours may already be there
    1) Open regedit (Start->Run, type regedit)
    2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE1031*8}\0000\Settings\filter\SpeakerHp\
    3) Create a new Binary Value
    4) Give it the name EnableInputMonitor
    5) Set it's value to 01
    6) Restart your machine
    7) Open your Playback Devices (right click on volume control icon in system tray, select Playback Devices)
    8) Open the Speakers/Headphones
    9) Go to the levels tab
    10) Unmute the input monitor
    T500 - P8600 2.4Ghz Core 2 Duo, Modded - 4GB Patriot DDR3 and 320GB Caviar Black 7200rpm drive with Ati HD3650 and Catalyst 9.6 modded drivers - Vista Business 32bit stripped down to bare bones with VM's from Ubuntu to Win7RC1 64-bit.

  • How to start listener in sql developer for remote debug

    how to start listener in sql developer for remote debug ? Since the new version 1.1.0.23 is different with the old version for remote debug, I don't know how to start the listener on the new version for remote debug.
    even follow the user guide below and not work . Experts on sql developer please help me with this.
    Remote Debugging
    To debug a procedure or function for a connection where the database is on a different host than the one on which you are
    running SQL Developer, you can perform remote debugging.
    Remote debugging involves many of the steps as for local debugging; however, do the
    following before you start the remote debugging: Use an Oracle client such as SQL*Plus to issue the debugger connection command. Whatever
    client you use, make sure that the session which issues the debugger connection commands is the same session which executes your PL/SQL
    program containing the breakpoints.
    For example, if the name of the remote system is remote1, use the following SQL*Plus command to open a
    TCP/IP connection to that system and the port for the JDWP session:
    EXEC DBMS_DEBUG_JDWP.CONNECT_TCP('remote1', '4000'); The first parameter
    is the IP address or host name of the remote system, and the second parameter is the port number on that remote system on which the debugger
    is listening.
    Right-click the connection for the remote database, select Remote Debug, and complete the information in the Debugger - Attach
    to JPDA dialog box. Then, follow the steps that you would for local debugging (for example, see Debugging a PL/SQL Procedure).
    Debugger - Attach to JPDA This dialog box is displayed when you right-click a database connection name and select Remote Debug.
    Use this
    dialog box if you are using the Sun Microsystem's Java Platform Debugger Architecture (JPDA) and you would like the debugger to listen so
    that a debuggee can attach to the debugger.
    For more information about remote debugging, see Remote Debugging.
    Host: Name or IP address of
    the remote host on which SQL Developer should listen for the database to connect.
    Port: Listening port number on the remote host. You can
    choose any valid port number that is not in use by another process.
    Timeout: The number of seconds that SQL Developer will wait for the
    remote database to make a debugging connection. Don't Show Dialog Box Before Connecting: If this option is checked, this dialog box will not
    be displayed before future connections for remote debugging

    You're not the only one:
    Not able to start remote debug listener
    Re: remote debug question at version 1.1.0.23 64

  • How can I listen to pandaro while exploring other apps

    How can I listen to pandaro while exploring other apps

    I'm guessing you mean "Pandora". Launch Pandora. Start listening to music. Tap the Home button. Select whatever app you want to work with.

  • How to get Listener Information using PL/SQL code

    How to get Listener Information using PL/SQL code

    user2075318 wrote:
    How to get Listener Information using PL/SQL codeThis approach (somewhat of a hack) can be used - but it does not really provide meaningful data at application layer.
    SQL> create or replace function TnsPing( ipAddress varchar2, port number default 1521 ) return varchar2 is
      2          type THexArray is table of varchar2(2);
      3          --// tnsping packet (should be 10g and 11g listener compatible)
      4          TNS_PING_PACKET constant THexArray := new THexArray(
      5                  '00', '57', '00', '00', '01', '00', '00', '00',
      6                  '01', '39', '01', '2C', '00', '00', '08', '00',
      7                  '7F', 'FF', '7F', '08', '00', '00', '01', '00',
      8                  '00', '1D', '00', '3A', '00', '00', '00', '00',
      9                  '00', '00', '00', '00', '00', '00', '00', '00',
    10                  '00', '00', '00', '00', '00', '00', '00', '00',
    11                  '00', '00', '00', '00', '00', '00', '00', '00',
    12                  '00', '00', '28', '43', '4F', '4E', '4E', '45',
    13                  '43', '54', '5F', '44', '41', '54', '41', '3D',
    14                  '28', '43', '4F', '4D', '4D', '41', '4E', '44',
    15                  '3D', '70', '69', '6E', '67', '29', '29'
    16          );
    17 
    18          socket  UTL_TCP.connection;
    19          txBytes number;
    20          rxBytes number;
    21          rawBuf  raw(1024);
    22          resp    varchar2(1024);
    23  begin
    24          socket := UTL_TCP.open_connection(
    25                          remote_host => ipAddress,
    26                          remote_port => port,
    27                          tx_timeout => 10
    28                  );
    29 
    30          --// convert hex array into a raw buffer
    31          for i in 1..TNS_PING_PACKET.Count loop
    32                  rawBuf := rawBuf || HexToRaw( TNS_PING_PACKET(i) );
    33          end loop;
    34 
    35          --// send packet
    36          txBytes := UTL_TCP.write_raw( socket, rawBuf, TNS_PING_PACKET.Count  );
    37 
    38          --// read response
    39          rxBytes := UTL_TCP.read_raw( socket, rawBuf, 1024 );
    40 
    41          UTL_TCP.close_connection( socket );
    42 
    43          --// convert response to varchar2
    44          resp := UTL_RAW.Cast_To_Varchar2( rawBuf );
    45 
    46          --// strip the header from the response and return the text only
    47          return( substr(resp,13) );
    48  end;
    49  /
    Function created.
    SQL>
    SQL> select tnsping( '10.251.93.30' ) as TNSPING from dual;
    TNSPING
    (DESCRIPTION=(TMP=)(VSNNUM=169869568)(ERR=0)(ALIAS=LISTENER))
    SQL> select tnsping( '10.251.95.69' ) as TNSPING from dual;
    TNSPING
    (DESCRIPTION=(TMP=)(VSNNUM=0)(ERR=0)(ALIAS=LISTENER))
    SQL>

  • How to write the value of JComboBox

    Hi All
    how to write the value of JComboBox, when the user selected?
    i.e. if i have text filed age and a JComboBox 20,30,40 and so on
    i want to save the age with the user selected item from JComboBox??
    any ideas

    Thanks for the useful link
    but what i need is how to write the JComboBox when it is appear in the line
    i.e if i have the following line
    Name Hana Age JComboBox Major JComboBox
    and i need to save all this line in a text file
    JLabel JTextfiled JLabel JComboBox JLabel JComboBox

  • How can I pre-define the default selection in a SelectOneChoice?

    How can I pre-define the default selection in a SelectOneChoice?
    (1) Here's my JSF-code:
    <af:selectOneChoice label="#{res['usercreate.input.sex']}"
    value="#{bindings.Sex.inputValue}"
    binding="#{SelectListBean.sexlist}"
    readOnly="false" autoSubmit="false">
    <af:selectItem label="#{res['data.sex.women']}" value="1"/>
    <af:selectItem label="#{res['data.sex.man']}" value="2"/>
    </af:selectOneChoice>
    (2): manged bean: to set the default value to be the first in the list, my managed bean as follows:
    import oracle.adf.view.faces.component.core.input.CoreSelectOneChoice;
    public class MBSListBean {
    private CoreSelectOneChoice sexlist;
    public MBSListBean() {
    public void setSexlist(CoreSelectOneChoice sexlist) {
    this.sexlist = sexlist;
    this.sexlist.setValue(1);
    public CoreSelectOneChoice getSexlist() {
    return sexlist;
    (3) when i launch the page, it often gives me such warnings:
    WARNUNG: Could not find selected item matching value "1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id7]
    how to solve the problem ?
    Thanks,
    wzzdx

    You could also set the default on your entity or viewobject, in the properties of your attribute.

  • How to get the values from html:select? tag..?

    i tried with this, but its not working...
    <html:select styleClass="text" name="querydefs" property="shortcut"
                 onchange="retrieveOptions()" styleId="firstBox" indexed="true">
    <html:options collection="advanced.choices" property="shortcut" labelProperty="label" />
    </html:select>
                        <td align="left" class="rowcolor1">
                        <script language="javascript" type="text/javascript">
                              function retrieveOptions(){
                             var sel = document.querydefs.options;
                             var selectedOption = sel[sel.selectedIndex].value;
                             document.write(selectedOption);
                           </script>

    <td align="left" class="rowcolor1">
                        <script language="javascript" type="text/javascript">
                              function retrieveOptions(){
                             var sel = document.querydefs.options;
                             var selectedOption = sel[sel.selectedIndex].value;
                             document.write(selectedOption);
                           </script>This java script is not working at all..its not printing anything in document.write();
    This is code..
    <td class="rowcolor1" width="20%">
    <html:select styleClass="text" name="querydefs" property="shortcut"
                             onchange="retrieveSecondOptions()" styleId="firstBox"
                             indexed="true">
                             <html:options collection="advanced.choices" property="shortcut"
                                  labelProperty="label"  />
                        </html:select>i tried with this also. but no use..i'm not the getting the seleced option...
    function retrieveOptions(){
    firstBox = document.getElementById('firstBox');
                             if(firstBox.selectedIndex==0){
          return;
        selectedOption = firstBox.options[firstBox.selectedIndex].value;
    }actually , how to get the values from <html:select> ...?
    my idea is to know which value is selected from the combo box(<html:select> ) if that value is equal some string i have enable a hyperlink to open a popup window

  • My computer crashed necessitating re-install of op sys and all programs including iTunes. At the iTunes store when I click a song in my library get error message "can't find, do you want to search?" What's happening? How can I listen to my library on this

    My computer crashed necessitating re-install of operating sys and all programs including iTunes. When I click on a song in my library I get an error message "can't find this song, want to search?" What gives? How can I listen to songs in my library on this computer now?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • If I imported a CD into my iTunes library from one computer how can I listen to it from another computer?

    If I imported a CD into my iTunes library from one computer how can I listen to it from another computer?  I imported music from a CD into my compter at work and when I got home and went to my iTunes account none of the songs were in my library.  I also noticed that on my Work computer there were a couple songs that I had to click on the little 'cloud' icon before I could listen to them (these were not songs I imported they were songs that were already in my library).  Not sure if this makes semse...help.

    jamie171 wrote:
    My question is since I have imported them into my iTunes library from one computer why can't I access them from my iTunes library from another computer that I have authorized to access whats in my library?  Is there no way to import songs only once into the library and then access them from all my authorized computers?
    Only if you have iTunes Match or of the computers are on the same local network.

  • How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

    How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

    Try this general troubleshooting procedure:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks and Yosemite,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.

  • My computer is already authorised with my apple ID, how do i listen to my purchased music?

    My computer is already authorized with my Apple ID, how do I listen to my purchased music? iTunes keeps asking me to authorize my computer.

    Refer to this article:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389

Maybe you are looking for