How do I load Quicktime 7.7 on my imac running MAC OSX 10.6.8? I bought and downloaded, but when I try to install it says I cannot instal on macintosh HD
I just bought and downloaded quicktime Pro for it's exporting capabilities. When I tried to install it on my imac it said it couldn't because QT 10 already exists on computer. When I dumped quicktime 10 in the trash and restarted computer, I still am unable to install.
You can't install that version on Snow Leopard. Look here instead:
http://support.apple.com/kb/DL923
Similar Messages
-
I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I correct this? I have been emailing support but so far they have been no help
Open the App Store app, go to the Featured pane, swipe to the bottom, tap the Apple ID and sign out. Tap again and sign in with the Apple ID of your choosing.
-
My iPod touch is running 3.1.3 and I want to update to 4.2.6 but when I try to update it says my softtware is up to date. How can I update?
I had the same problem with my 1st gen iPod touch and I tried a couple times to update it but sadly you can't because the software on the 1st gens can't support a higher iOS.
-
I have some updates due on some Apps I have downloaded but when I try to update I get a message saying that my account is not in the UK store so must switch to Ireland before purchasing. Does anybody know how you change stores? I did not do this deliberately!
Yup! Here:
http://support.apple.com/kb/HT1311 -
How do I authorize my computer to play my Itunes music? I downloaded Itunes on my pc but when I try to play my songs in my library it says my computer is not authorized ..... Why not? These are songs I have had for a long time. This is a new HP computer I just bought. Help please.
You're welcome.
tt2 -
I have a bunch of songs that show up under my purchased list and they say they are downloaded. But when I try to play them in itunes it says it can't locate them. How do I correct this?
Welcome to Apple Communities
Select the songs and go to Edit > Delete. Then, download the music in iTunes Store -
I have been importing images via card reader with no problem. Now all of a sudden I can see the images on the screen but when I try to import the computer says that it can not read them and quotes numbers of the images. Any idea how to solve?
Please give us the exact error message.
Please state your operating system.
Please state the exact version of Lightroom you are using.
Please give us any other relevant details.
What does this mean: "Now all of a sudden I can see the images on the screen"? Are you looking in Lightroom or your operating system or the camera screen? Where? -
I have tried to download the book, How Jesus became God" by Bark Ehrman. Even though IBook states download and I have the icon for the book in my library when I try to open the book I get the message, " It is formatted incrrectly, or is not a format that iBooks can open". This is even though I purchased the book through IBooks and the IOS is adequate.
JoeForresterThis is a question. Any help or solutions?
-
How can I upgrade from iMovie 7.4.1 while running Mac OSX 10.7.5?
I am trying to upgrade iMovie 7.4.1, but I don't know where to get the next version of the software.
I am currently running OSX 10.7.5 on a 2008 iMac.
Thanks.With the above listed config that I have (iphoto 7.1.5 on an older iMac running OSX 10.6.8), how can I move my iPhoto library from this old iMac (2006) to my NEW iMac (2011) that is running iPhoto 9.5.1 ?
To open an iPhoto 7.1.x version in iPhoto '11 you need to run the iPhoto Library Upgrader. See this Support document:
iPhoto '11: About the Library Upgrade
Download and install the upgrader, then run it on your iPhoto 7.1.5 library. After that, iPhoto will be able to open your library and upgrade it to version 9.5.1. And you will be able to merge the libraries with if Library Manager. -
How to connect CLW 12/600 to PowerMac G4/G5 running Mac OSX 10.4 ?
I have an Apple Color LaserWriter 12/600 PS that are still running very well. How can I connect the printer to a PowerMac G5 (Quad) running OSX 10.4 Tiger ? Alternatively, I also have a PowerMac G4 MDD dual 1.25Ghz running the same OS.
Any input is appreciated! THANKS!
Apple CLW 12/600 PS Mac OS X (10.4.6)That printer has an Ethernet port, but it may have been implemented as an AAUI Ethernet, rather than RJ-45. Look for a connector labelled <_> If that is your connector type, you will need a US$5 used Transceiver to convert it to RJ-45 ("regular" Ethernet cable).
Connect the printer to your Ethernet Hub or Switch or Router, and it will be accessible as a Network Printer -- you can connect to it from all of your computers using AppleTalk-Over-Ethernet. It appears that this printer is also LPR/LPD capable, so you can also connect to it using LPR/LPD protocol, as described in this article:
245212- What Is LPR?
You will need to turn on AppleTalk in the Preferences > Network > Built-In Ethernet pane. The middle category should say AppleTalk. You have no Zones.
The driver for all Postscript level 2 LaserWriters is built in to Mac OS 9 and Mac OS X.
Preferences > Print and fax > ( Set up Printers ) > Add > using [ AppleTalk ] -
I have all files visible from control panel i am running windows 7 home premium.
That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support
-
I redeemed a gift card, the amount shows up in the top right corner of my account but when I try to purchase music it goes to the account that I have loaded previously. How do I use the gift card?
If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account. -
I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!
RESET YOUR ROUTER
No. Reset your router. -
How do I load a sd card into my imac?
How do I load a sd card into my imac?
I have a brand new iMac. Won't recognize my card.
Mac won't recognize my camera either
Won't recognize my HD video camera.
Somehow I can't believe my windows PC has done better on pictures and video. How is that possible? -
My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How can I delete an Icloud account that is already on my phone?
I have started a new job and my predesessor left his icloud account on the phone. How can i delete it without his password?
-
Sync File Corruption with 64-bit Vista/iTunes
I'm getting some file corruption problems when trying to sync my new 16GB iPhone with the latest 64-bit iTunes (7.6.0.29). "yes I have the 64-bit version". The sync seems to go correctly, but I have yet to be able to play any videos all the way throu
-
Tax statement item missing for tax code V0_During MIRO
Hi, I am currently working on 6.0 for a client in UAE. I am getting the above error with tax code while passing MIRO. The tax code dwfined is a 0% tax code. System throws an error as ; Tax statement item missing for tax code V0 Message no. FF805 Diag
-
Quick Look Filter not working in OS 10.6.8
I really like the ability to preview files by simply pressing the spacebar. I was able to do this fine on a previous iMac using OS 10.6.8, but when I installed the QuarkXpress.qlgenerator file on the new iMac running OS 10.6.8 it does not work unless
-
JRockit 1.4.2_04 and Thinthreads
Hi, I just upgraded to JRockit 1.4.2_04 from 1.4.1_x. With the latter one I used the -Xthinthreads option. Now JRockit tells me there wouldn't be such an option any longer. Has this optioned been renamed or is there no thinthreads support any longer?