How do I loop a set action in Photoshop extended?

How do I take a recorded action set , so that Photoshop Extended will loop or repeat the actions through all the frames of my Quicktime?
My set include an action with "next frame" and an action with "Match color". When I play the set, the movie goes one frame forward and change color with the match1.sta that I created. Now How Do I Loop The Set for each frame of my movie. I am not having much luck with Batch...
Thanks

G
I restarted PS to stop recording
Now I have
1- Stepaction
2- Machtaction
then
3- Youractiontomarchcolor with
play "Matchaction"
play "stepaction"
then
4- LoopAction with " play Youractiontomarchcoloraction "
Still I 'm getting " Could not complete the Play command because the action is recording" even after PS restart?
Help and thanks

Similar Messages

How do I download the trial version of Photoshop Extend?

I am trying to download the trial version of Photoshop Extend but I am having problems doing so. My computer meets all the system requirements, I have cleared out my temp files and tried switching web browsers from Windows Explorer to Mozilla Firefox. Nothing works. I go to the trial download page for Photoshop Extend, select the drop-down menu for "English/Windows/815.5" and click "Download". In Windows Explorer, I get that exclamation mark over the pointing finger then I'm directed to the page that says, "try again". Basically the same thing in Firefox. Why can't I download this program?
Many thanks!
Regards, Lewis J.

Turn off windows internet explorer popup blocker.
If your on a router turn off windows firewall. Most routers already have a builtin firewall and using 2 firewalls does not help matters in downloading.

How do I find my "Product Code" for Photoshop Extended CS6 Student Edition?

My daughter bought the Photoshop Extended CS6 student edition, retrieved the serial number, downloaded and installed the software. Now it is asking us to register and wants a 19 digit "product code" before continuing with the resistration. The retailer claims it is the serial number but the registration utility will not accept that. The Adobe account is showing no registered products. Can this be fixed?

Hoppej2140 have you tried redeeming the redemption code using the directions listed at Redemption Code Help?

How can i set action on UITaBar and get event from that

Hi All,
I m doing one apps in which i have to add three UITabBarItem and this is UITabBarSystemItem.
Now i cannot understand that how can i set action and get event from the?
And how can i set various views on three tab bar item.
I have to use UITabBar means i have to use UINavigationController+UITabBar
My code id
tabBar =[[UITabBar alloc] initWithFrame:CGRectMake(0,370,320,50)];
tabBar.backgroundColor =[UIColor blackColor];
UITabBarItem *search =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemSearch tag:0];
UITabBarItem *recents =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemRecents tag:1];
UITabBarItem *favorites =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemFavorit es tag:2];
tabBar.items =[[NSArray arrayWithObjects:search,recents,favorites, nil] retain];
tabBar.selectedItem = search;
[myView addSubview:tabBar];
[tabBar release];
I add a action:
UITabBarItem *search =[[UITabBarItem alloc] InitWithTabBarSystemItem:UITabBarSystemItemSearch tag:0 action:@selector(select:)];
So it error: Warning -no'InitWithTabBarSystemItem:tag:action:' method fount
So any can help me regarding it?

Thanks RickMaddy very much.
I read and do with sample at the View Controller Programming Guide . But when run it only view TabBar with title but haven't got any TabBarItem on it. I searched a few example about TabBar and i did, but i want do a form with a button then press on button it view a form with 2 TabBarItem on TabBar and press each TabBarItem will show correlative form page 1, page 2.
UITabBarController *tabBarControl = [[[UITabBarController alloc] initWithNibName:nil bundle:nil] autorelease];
tabBarControl.title = @"Tab bar";
ViewControl1 *view1 = [[[ViewControl1 alloc] initWithNibName:@"ViewControl1" bundle:nil] autorelease];
ViewControl1 *view2 = [[[ViewControl1 alloc] initWithNibName:@"ViewControl2" bundle:nil] autorelease];
tabBarControl.viewControllers = [NSArray arrayWithObjects:view1,view2,nil];
[self.navigationController pushViewController:tabBarControl animated:YES];

How to find out how many recourds in recourd set with out while loop

hi
i want to findout how many recourds in recourd set
with out useing any loops like
while(rs.next())
count+=1;
like this
any mathod like(RecoundCount like )
pls help me
regards
kedar

If you dont want to use a scrollable result set do
sql="SELECT COUNT(*) AS COUNT FROM TABLE"
rs=stmt.executeQuery(sql);
rs.next()
count=rs.getString("COUNT");

How to set Action of commandButton from javabean?

Hi,
How can I to set Action of commandButton from javabean with JSF 1.1?
Thanks

Try this:
import javax.faces.component.html.HtmlCommandButton;
Application application = FacesContext.getCurrentInstance().getApplication();
HtmlCommandButton button = (HtmlCommandButton) application.createComponent(HtmlCommandButton.COMPONENT_TYPE);
MethodBinding mb = application.createMethodBinding("#{mybean.action}", null);
button.setAction(mb);

How to replay( looping ) a movie clip which animated by action script?

My movie clip has only one frame, I animate it by using
action script.
How can I looping its animation?

quote:
Originally posted by:
dzedward
if you're using the Tween class, listen for onMotionFinish
(as2) or MOTION_FINISH (as3) to start the tween over.
no, my movie clip was animated by using for loop. What I want
to do is no matter where I put my movie clip, it will contnuously
move from left to right.

How to find Latch and what actions need to be taken when there is a latch

Hi
Can you please tell me how to find Latch and what actions need to be taken when there is a latch?
Thanks
Regards,
RJ.

1. What is a latch?
Latches are low level serialization mechanisms used to protect shared
data structures in the SGA. The implementation of latches is operating
system dependent, particularly in regard to whether a process will wait
for a latch and for how long.
A latch is a type of a lock that can be very quickly acquired and freed.
Latches are typically used to prevent more than one process from
executing the same piece of code at a given time. Associated with each
latch is a cleanup procedure that will be called if a process dies while
holding the latch. Latches have an associated level that is used to
prevent deadlocks. Once a process acquires a latch at a certain level it
cannot subsequently acquire a latch at a level that is equal to or less
than that level (unless it acquires it nowait).
2. Latches vs Enqueues
Enqueues are another type of locking mechanism used in Oracle.
An enqueue is a more sophisticated mechanism which permits several concurrent
processes to have varying degree of sharing of "known" resources. Any object
which can be concurrently used, can be protected with enqueues. A good example
is of locks on tables. We allow varying levels of sharing on tables e.g.
two processes can lock a table in share mode or in share update mode etc.
One difference is that the enqueue is obtained using an OS specific
locking mechanism. An enqueue allows the user to store a value in the lock,
i.e the mode in which we are requesting it. The OS lock manager keeps track
of the resources locked. If a process cannot be granted the lock because it
is incompatible with the mode requested and the lock is requested with wait,
the OS puts the requesting process on a wait queue which is serviced in FIFO.
Another difference between latches and enqueues is that
in latches there is no ordered queue of waiters like in enqueues. Latch
waiters may either use timers to wakeup and retry or spin (only in
multiprocessors). Since all waiters are concurrently retrying (depending on
the scheduler), anyone might get the latch and conceivably the first one to
try might be the last one to get.
3. When do we need to obtain a latch?
A process acquires a latch when working with a structure in the SGA
(System Global Area). It continues to hold the latch for the period
of time it works with the structure. The latch is dropped when the
process is finished with the structure. Each latch protects a different
set of data, identified by the name of the latch.
Oracle uses atomic instructions like "test and set" for operating on latches.
Processes waiting to execute a part of code for which a latch has
already been obtained by some other process will wait until the
latch is released. Examples are redo allocation latches, copy
latches, archive control latch etc. The basic idea is to block concurrent
access to shared data structures. Since the instructions to
set and free latches are atomic, the OS guarantees that only one process gets
it. Since it is only one instruction, it is quite fast. Latches are held
for short periods of time and provide a mechanism for cleanup in case
a holder dies abnormally while holding it. This cleaning is done using
the services of PMON.
4. Latches request modes?
Latches request can be made in two modes: "willing-to-wait" or "no wait". Normally,
latches will be requested in "willing-to-wait" mode. A request in "willing-to-wait" mode
will loop, wait, and request again until the latch is obtained. In "no wait" mode the process
request the latch. If one is not available, instead of waiting, another one is requested. Only
when all fail does the server process have to wait.
Examples of "willing-to-wait" latches are: shared pool and library cache latches
A example of "no wait" latches is the redo copy latch.
5. What causes latch contention?
If a required latch is busy, the process requesting it spins, tries again
and if still not available, spins again. The loop is repeated up to a maximum
number of times determined by the initialization parameter SPINCOUNT.
If after this entire loop, the latch is still not available, the process must yield
the CPU and go to sleep. Initially is sleeps for one centisecond. This time is
doubled in every subsequent sleep.
This causes a slowdown to occur and results in additional CPU usage,
until a latch is available. The CPU usage is a consequence of the
"spinning" of the process. "Spinning" means that the process continues to
look for the availability of the latch after certain intervals of time,
during which it sleeps.
6. How to identify contention for internal latches?
Relevant data dictionary views to query
V$LATCH
V$LATCHHOLDER
V$LATCHNAME
Each row in the V$LATCH table contains statistics for a different type
of latch. The columns of the table reflect activity for different types
of latch requests. The distinction between these types of requests is
whether the requesting process continues to request a latch if it
is unavailable:
willing-to-wait If the latch requested with a willing-to-wait
request is not available, the requesting process
waits a short time and requests the latch again.
The process continues waiting and requesting until
the latch is available.
no wait If the latch requested with an immediate request is
not available, the requesting process does not
wait, but continues processing.
V$LATCHNAME key information:
GETS Number of successful willing-to-wait requests for
a latch.
MISSES Number of times an initial willing-to-wait request
was unsuccessful.
SLEEPS Number of times a process waited a requested a latch
after an initial wiling-to-wait request.
IMMEDIATE_GETS Number of successful immediate requests for each latch.
IMMEDIATE_MISSES Number of unsuccessful immediate requests for each latch.
Calculating latch hit ratio
To get the Hit ratio for latches apply the following formula:
"willing-to-wait" Hit Ratio=(GETS-MISSES)/GETS
"no wait" Hit Ratio=(IMMEDIATE_GETS-IMMEDIATE_MISSES)/IMMEDIATE_GETS
This number should be close to 1. If not, tune according to the latch name
7. Useful SQL scripts to get latch information
** Display System-wide latch statistics.
column name format A32 truncate heading "LATCH NAME"
column pid heading "HOLDER PID"
select c.name,a.addr,a.gets,a.misses,a.sleeps,
a.immediate_gets,a.immediate_misses,b.pid
from v$latch a, v$latchholder b, v$latchname c
where a.addr = b.laddr(+)
and a.latch# = c.latch#
order by a.latch#;
** Given a latch address, find out the latch name.
column name format a64 heading 'Name'
select a.name from v$latchname a, v$latch b
where b.addr = '&addr'
and b.latch#=a.latch#;
** Display latch statistics by latch name.
column name format a32 heading 'LATCH NAME'
column pid heading 'HOLDER PID'
select c.name,a.addr,a.gets,a.misses,a.sleeps,
a.immediate_gets,a.immediate_misses,b.pid
from v$latch a, v$latchholder b, v$latchname c
where a.addr = b.laddr(+) and a.latch# = c.latch#
and c.name like '&latch_name%' order by a.latch#;
8. List of all the latches
Oracle versions might differ in the latch# assigned to the existing latches.
The following query will help you to identify all latches and the number assigned.
column name format a40 heading 'LATCH NAME'
select latch#, name from v$latchname;

How to use open data set in SAP

Hi SAP Gurus,
        Could anyone help, how to use open data set in SAP.
      I need to upload a file from Application server (ZSAPUSAGEDATA) to internal table (IT_FINAL).
Thanks & Regards,
Krishnau2026

Hi Krishna.
These are the steps you need to follow.
tables: specify the table.
data: begin of fs_...
        end of fs_    " Structure Field string.
data: t_table like
        standard table
                  of fs_...
data:
w_file TYPE string.
data:
fname(10) VALUE '.\xyz.TXT'.
select-options: if any.
PARAMETERS:
p_file LIKE rlgrap-filename.
w_file = p_file.
select .... statement
OPEN DATASET fname FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*OPEN DATASET fname FOR OUTPUT IN BINARY MODE.
LOOP AT t_... INTO fs_....
write:/ .....
TRANSFER fs_... TO fname.
or
TRANSFER t_... TO fname
ENDLOOP.
CLOSE DATASET fname.
Reward points wisely and if you are benefitted or ask for more detailed explanation if problem not solved.
Regards Harsh.

How to Run a Request Set on specific days and at specific hours

Hi community,
The question is simple, how to rin a Request Set on Specific Days and at Specific hours?
Let me explain the scenario.
E-Business Suite, Release 11.5.9.
We have a request set under Sysadmin user. This Request set is running 24x7, during all year, and we want to restrict the execution from Monday to Friday since 08:00 a.m. to 20:00 p.m. in order to increase the productivity of our system and more over, to avoid the size increase of a table (OE_EXPOSURE_INTERFACE)
The Request Set includes 5 Requests:
10. Workflow Background Process.
20. GUZMAN: Cálculo metodo pago en pedidos.
30. GUZMAN: Exposición de crédito externo.
40. Credit Exposure Import.
50 Initialize Credit Summaries Table.
As you can see three of them are standar Oracle Order Management Processes and two of them are custom Oracle Order Management Processes; and the requests must be executed in that order.
We have just thinking about to create a Custom Manager with a workshift from Monday to Friday since 08:00 a.m. to 20:00 p.m., and include the requests as specialization rules or assigning those request to a Request Type and then include that Request Type as specializated rule, but this does not assure us that the request will be executed in that order.
Any suggestion?
Thanks a lot for your answer in advice.
Luis.

Hi Anchorage,
It could be a solution, but not the exact solution that we want. Let me say why.
With the Request set we have the security that each concurrent request is executed when the prior one finishes; is that to say 20, does not begin till 10 finishes, and 30 does not begin till 20 finishes and so on. The most critical concurrent requests are 40 and 50, cause those are the ones that import an external credit exposure in the OE_EXPORURE_INTERFACE table (40) and are the ones that delete those external credit exposures imported (50). The problem is (and we do not know why) that these actions makes grow the size of the table and each time the 40 and 50 processes takes more minutes to finish. That's why we need to truncate the table in order to avoid the excesive grow of itself.
Making each process independent, with a begining time and hoping and expecting that the following one does not begin till the prior one ends is not an admisible or realizable solution due to the problem with the 40 and 50 processes.
So at the end, we need a request set in order to know that each one began when the prior one ends.
And Due to in order to truncate the table, as I said before, the processes that have a relationship whit it, must be stopped (just the 40 and 50 processes) prior to the truncation.
So as you see, it is difficult, very difficult.
Regards.

How to Disable the Lead selection Action on aTable n How to Refreh a Page

HI....
1)How to Disable the Lead selection Action on aTable n How to Refreh a Page r web dynpro application.
In my case i have a table n user enters data on multiple rows in table , n i have some input fields outside of table for those Inputs fields am settiing the data at the screen initilization(in Init() moethod by hard code).the problem is whenever the is clicking in th 2nd row of a table the Lead Selection is triggerig and the data in the Input Fields outside the table is not displayinig.
So by removing the lead Selection Action of a table i thought i can reslove this,
2) How to refresha page(like we click F5 on key board),is it can be done thru code in web dynpro application
Regards
Rajesh

Hi,
You did not explained what is your functionality or coding in leadselection. Is that action on leadselection is necessary for you?.
1)If you just want to remove the action then go to table properties and remove the action for leadselection.
2)If you still want to continue with your leadselect action, then what you can do is.. write the code in leadselection action to again set the input fields which are out from table. That is what you did in your init method.
Page Refreshing
3) What do you mean by page refreshing? is that refreshing your table only or both the table and input fields.
What I understood is you are allowing the user to enter values in table and soon after pressing a button the values should be saved and the data in input fields shld be deleted. For this if you only invalidate the node then the user entered data will be lost.
So what you do is after getting the input data from the user add it to a ArrayList and then invalidate the node which clears the data in input field. Finally bind the Arraylist to your node. see the following code. This is a concept make changes according to your requirement
ArrayList list1=new ArrayList();
wdContext.nodeAbc().bind(list1);
IPrivateExcelviw.IAbcElement ele = wdContext.createAbcElement();
ele.setNo(wdContext.currentAbcElement().getNo());
ele.setName(wdContext.currentAbcElement().getName());
ele.setMarks(wdContext.currentAbcElement().getMarks());
list1.add(ele);
wdContext.nodeAbc().invalidate();
wdContext.nodeAbc().bind(list1);
Revert me if you have any doubts
Regards
Raghu
Edited by: Raghunandan Madarikuruva on Oct 16, 2008 8:07 AM

How does Iterate work inside an Action

I'm having trouble figuring out how does <Iterate > work inside an <Action> in a workflow. My <Action> is to call a subprocess that takes several arguments and initiates an approval. Since I need to fire-off several approvals at the same time instead of chaining them I use <Iterate> that loops over a list variable.
Now the subprocess being an approval the workflow gets suspended and divided into multiple parallel paths. My question is that how do these parallel paths assimilate together after approval or they don't assimilate at all and process in separate parallel lines or otherwise whichever approval returns first takes precedence and proceeds with rest of the activities.
TIA,
AndyDev

Thanks for the reply. But this doesn't answer my question completely.
Say within <Iterate> I specify **for='var_name' in='list_name'** will it continue to run after it has run once for each element in the list. If yes, doesn't it trigger the sub-process multiple times, something I don't want. If no, what happens next ? (that was actually my original ques).
Say if list_name had 5 elements, it triggers one sub-process (which is a multiapproval) for each of them. What happens next ? Does it transition to next activity? Does it wait for all approvals to finish approve/reject?

How do I loop a QuickTime sequence 7 times?

How do I loop a QuickTime sequence 7 times? Am using QT Pro. Thanks

A simple, inelegant approach: In QT Pro, copy the movie and paste it six times to extend the track. Resave.
Another approach (if you have Snow Leopard or above): Automator's Play Movies action has a looping option, though it uses QT 10 rather than QT 7 for playback and the playback isn't as seamless as the first method.

How do I: Loop through Application objects

How would I loop through the application object? My goal is to see if the object is a label and change its font size.
pseudocode would look like this:
function setsize(change int) {
for each obj in application {
    if obj is of type label {
      set font size to font size + change
Once I got that working, I'd add other objects that display text. The "change" would be a number to increase (positive) or decrease (negative) the size.
Thanks,
Jerry

I have this:
          <mx:HBox id="resultTextBox"
              width="100%"
              verticalScrollPolicy="off" horizontalScrollPolicy="auto">
              <mx:Label id="resultPotentialResultsLabel"
                  text="Food Stamp potential eligibility for household, estimated monthly benefit amount "
                  styleName="textNormal"
                  toolTip="Results message"
                  tabIndex="200" tabEnabled="true" fontSize="40"/>
              <mx:Text id="resultPotentialResultsData"
                  styleName="resultNumberNormal"
                  toolTip="Final results"
                  tabIndex="202" tabEnabled="true" />
          </mx:HBox>
When I expand the font size it pushes the "resultPotentialResutsData" to limbo. I tried adding the horizonal scroll bar to allow the user to still see the results, The scroll doesn't appear.
1) is there a way to get the box to expand to fix the content?
2) is there a way to get the scroll bar to appear when needed?
3) is there a way to wrap the text (in this case the second field) in the HBox?

How does one loop playback of small selections within the timeline?

How does one loop a selection of footage from within the timeline? I'm trying to edit students' tapping hands and pencils on desks into small timed chunks that will play back as seamless loops and I need to be able to slowly shorten or elongate sections of footage as it plays and repeates until the loop matches the timing of the song we are making. I'm using PE8 and can't seen to find an easy way to do this. Surely there is one! Is there?

I appreciate the help everbody, but It looks like I didn't state my question effectively. Let me try again.
It will be easier if I explain what it is I am used to. This is what I need to know how to do in PE8, because the school in which I teach AV has chosen PE8 for my classes and won't let me install anything else.
In Sony Vegas - all versions, you can click and drag to quickly make a selection of video and audio. You can do this while video is rolling and you can then choose to have your A&V loop within this selection. I have seen replies on this forum where this feature within Vegas was treated as if it were a dumb thing. It's not dumb once you realize what it can be used to do for you. While continuing to loop within your slelection, you can move this selection throughout your timeline, rough tuning where you want your loop to be. If your loop needs to be exactly 66 frames, for instance, you could first set this selection at 66 frames and then move it up and down the timlene until you find the best place to cut. Or, in the case of trying to find where some sound within your selection makes a seamless loop, you can increase or decrease the size of your selection on the fly as the selection continues to repeat.
How do you do that in PE8? If it can't do it, can the full version of Premiere?
Thanks again for the help.
-Chris

How do I loop a set action in Photoshop extended?

Similar Messages

Maybe you are looking for