How do I maintain consistent ODL configuration across a cluster?

ODL has good support for viewing logs across multiple servers in a cluster or domain withh Fusion Middleware Control. There seems to be no similar support for configuring ODL across multiple servers.
The objective is identical ODL configuration for all servers in a cluster. Clearly this can be done by copying logging.xml files to each server, issuing wlst logging commands to each server, or configuring each server using FMW Control.
Have I missed some built-in way to configure once and have FMW apply to multiple servers?

Hi,
The version set information and the tag hierarchy are stored within the catalog. It sounds as though you haven't brought over the catalog from your old computer.
The recommended way to transfer elements from one computer to a new one is to use the Backup catalog to CD, DVD or Hard Drive on your old system and then use Restore catalog from CD, DVD or Hard Drive on your new system. Is this how you did it?
That should have preserved your version sets.
Brian

Similar Messages

How do I maintain consistent video resolution in primary and tablet views?

I have a module that includes a screen shot, followed by a video demo of the screen scrolling, followed by another screen shot. Everything flows smoothly in the primary view. However, things change in the tablet view. When showing the scrolling video slide, the tablet view increases the resolution to show the entire recorded screen. This differs from the screen shots on slides before and after that show just what can fit in the tablet view. Is there any way to reduce the resolution of the video demo slide to match the rest of the slides?
Thanks,
Darin

aggro
What version of Premiere Elements are you using and on what computer operating system is it running?
This sounds like a split screen effect to me.
If so, one view on Video 1 and the other directly above that is the other view on Video 2.
Then crop each so that each occupies 1/2 the Edit area monitor screen.
(generalized since I do not know your program version, see effects Transform/Crop).
I wrote the following in 2011 for a Premiere Elements 8 user in another forum
Your basic tools to achieve your goal are Crop Video Effect and Horizontal Flip Video Effect.
Video ONE on video track 1.
Video TWO on video track 2, directly above Video ONE.
Highlight Video ONE on video track 1, Edit Mode/Effects/Video Effects/Transform/Crop, followed by adjusting the crop under Edit Effects (see bottom of Effects Panel) so that Video ONE occupies the left half of the screen.
Do the same for Video TWO on video track 2, Edit Mode/Effects/Video Effects/Transform/Crop etc. so that Video TWO occupies the right half of the screen. BUT end with Edit Mode/Effects/Video Effects/Transform/Horizontal Flip.
Highlight the video on either side to make adjusts in the Properties Palette and appropriate Panel (position, cropping, etc). But, remember that if you make changes in the "flipped" right side of the screen, Edit Effects/Crop Panel right option will be for left and left option will be for right.
You may or may not need the "flip" part of the effect.
Please review and consider. If I have misinterpreted your question, please let me know with details and I will rethink what you seek.
Thanks.
ATR

How to maintain consistance in muliple badi while we are creating

hi
1)how to maintain consistance in multiple badis
while we are doing this how we wil maintain

multiple implementation badis are governed by filter keys...please google 'multiple implementation badi' and you would get enough material.
Regards,
BJ

How do you recommend a JE configuration according to app. construction?

Hi to all,
When we use JE as following configuration, CPU utilization is consistently high ans sometimes low.
How do you recommend a JE configuration according to application construction?
Our Application and use of JE configuration is as follows.
- App. logic and JE usage as following;
Application creates 4 Environments(each one has data-store-Database for class-store-Database). Environments are not linked to each other, completely independent.
App. executes concurrent non-transactional 1600 inserts(Database.put), 1600 updates(Database.put) and 1600 deletes(Database.put) in a second ( It means 1600/4 inserts, 1600/4 updates, 1600/4 deletes for one environment)
Also using SerialBinding to store app. object that implements java.io.Serializable.
Environment.sync method called 1 time in minutes.
Insert-Update objects are the same and size of the object approximately 500 bytes-1 K.
%80 of inserted records will be updated 1 time in one second and than deleted in a 5 seconds.
%20 of inserted records will be updated 10 times in 28,5 hours and than deleted.
We have 50 GB disk space, totally 24 cpu with model name : Intel(R) Xeon(R) CPU X5675 @ 3.07GHz
- Our JVM settings as following;
-Xmx33g
-Xms33g
-XX:+UseParNewGC
-XX:+UseConcMarkSweepGC
-XX:CMSInitiatingOccupancyFraction=50
-XX:+PrintTenuringDistribution
-verbose:gc
-XX:+PrintGCApplicationConcurrentTime
-XX:+PrintGCApplicationStoppedTime
- je.properties as following;
## Environment
je.env.isReadOnly=false
je.env.isTransactional=false
je.maxMemoryPercent=30
je.log.bufferSize=20971520
je.log.numBuffers=2
je.log.fileMax=209715200
je.cleaner.minUtilization=30
je.cleaner.minFileUtilization=5
je.cleaner.threads=2
je.cleaner.lockTimeout=100000
je.cleaner.expunge=true
je.cleaner.bytesInterval=104857600
je.checkpointer.bytesInterval=104857600
je.checkpointer.highPriority=true
- Last JE Statistics;
          (1)CacheTotalBytes= The total amount of JE cache in use, in bytes.
          (2)DataBytes= The amount of JE cache used for holding data, keys and internal Btree nodes, in bytes
          (3)AdminBytes= The number of bytes of JE cache used for log cleaning metadata and other administrative structures
          (4)LockBytes= The number of bytes of JE cache used for holding locks and transactions.
          (5)NEvictPasses= Number of eviction passes, an indicator of the eviction activity level.
          (6)NCacheMiss= The total number of requests for database objects which were not in memory.
          (7)TotalLogSize= An approximation of the current total log size in bytes.
          (8)SharedCacheTotalBytes= The total amount of the shared JE cache in use, in bytes.
          (9)NTotalLocks= Total locks currently in lock table.
     Environment-1:(1)=174,757,042 (2)=132,804,551 (3)=9,235 (4)=216 (5)=0 (6)=188 (7)=284,132,682 (8)=0 (9)=2
     Environment-2:(1)=174,803,884 (2)=132,850,463 (3)=10,165 (4)=216 (5)=0 (6)=179 (7)=277,346,265 (8)=0 (9)=2
     Environment-3:(1)=174,739,257 (2)=132,776,071 (3)=19,930 (4)=216 (5)=0 (6)=184 (7)=278,147,194 (8)=0 (9)=2
     Environment-4:(1)=174,767,092 (2)=132,776,471 (3)=47,365 (4)=216 (5)=0 (6)=185 (7)=292,163,876 (8)=0 (9)=2
     Sum of Data-store-Database.count = 1137265
- Last CPU utilization ;
     top - 10:33:58 up 102 days, 22:42, 3 users, load average: 2.55, 3.22, 3.48
     Tasks: 403 total, 1 running, 402 sleeping, 0 stopped, 0 zombie
     Cpu0 : 2.6%us, 2.3%sy, 0.0%ni, 95.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu1 : 6.8%us, 1.3%sy, 0.0%ni, 91.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu2 : 3.3%us, 0.3%sy, 0.0%ni, 96.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu3 : 8.1%us, 2.3%sy, 0.0%ni, 89.3%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu4 : 7.5%us, 2.0%sy, 0.0%ni, 90.5%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu5 : 7.5%us, 1.3%sy, 0.0%ni, 90.9%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu6 : 7.1%us, 0.6%sy, 0.0%ni, 92.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu7 : 8.4%us, 1.0%sy, 0.0%ni, 90.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu8 : 6.5%us, 2.3%sy, 0.0%ni, 91.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu9 : 7.5%us, 2.6%sy, 0.0%ni, 89.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu10 : 31.2%us, 0.3%sy, 0.0%ni, 68.2%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu11 : 2.9%us, 0.6%sy, 0.0%ni, 96.1%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu12 : 6.8%us, 0.3%sy, 0.0%ni, 92.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu13 : 9.2%us, 2.9%sy, 0.0%ni, 87.6%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu14 : 8.1%us, 0.6%sy, 0.0%ni, 91.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu15 : 12.1%us, 5.2%sy, 0.0%ni, 81.8%id, 0.0%wa, 0.0%hi, 1.0%si, 0.0%st
     Cpu16 : 2.6%us, 0.6%sy, 0.0%ni, 96.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu17 : 12.6%us, 5.5%sy, 0.0%ni, 80.3%id, 0.0%wa, 0.3%hi, 1.3%si, 0.0%st
     Cpu18 : 7.5%us, 0.6%sy, 0.0%ni, 91.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu19 : 11.3%us, 4.9%sy, 0.0%ni, 83.2%id, 0.0%wa, 0.0%hi, 0.6%si, 0.0%st
     Cpu20 : 6.8%us, 0.3%sy, 0.0%ni, 92.5%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu21 : 8.5%us, 8.1%sy, 0.0%ni, 82.1%id, 0.0%wa, 0.0%hi, 1.3%si, 0.0%st
     Cpu22 : 26.9%us, 0.6%sy, 0.0%ni, 72.1%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu23 : 6.5%us, 0.3%sy, 0.0%ni, 92.2%id, 0.0%wa, 0.3%hi, 0.6%si, 0.0%st
     Mem: 49454804k total, 26187100k used, 23267704k free, 1933064k buffers
     Swap: 50331640k total, 66092k used, 50265548k free, 4475980k cached
     PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
     22509 mtsmsc 18 0 34.3g 17g 14m S 260.8 37.6 1552:12 java
     top - 10:16:56 up 102 days, 22:25, 2 users, load average: 5.43, 4.32, 3.31
     Tasks: 400 total, 1 running, 399 sleeping, 0 stopped, 0 zombie
     Cpu0 : 7.3%us, 0.7%sy, 0.0%ni, 92.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu1 : 7.7%us, 2.0%sy, 0.0%ni, 90.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu2 : 1.7%us, 0.0%sy, 0.0%ni, 98.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu3 : 6.3%us, 1.3%sy, 0.0%ni, 92.1%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu4 : 2.3%us, 0.3%sy, 0.0%ni, 97.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu5 : 6.6%us, 1.3%sy, 0.0%ni, 91.7%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu6 : 27.7%us, 0.0%sy, 0.0%ni, 72.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu7 : 7.0%us, 1.0%sy, 0.0%ni, 92.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu8 : 7.6%us, 0.7%sy, 0.0%ni, 91.4%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu9 : 7.0%us, 2.7%sy, 0.0%ni, 90.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu10 : 6.3%us, 2.0%sy, 0.0%ni, 91.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu11 : 7.3%us, 2.3%sy, 0.0%ni, 90.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu12 : 3.0%us, 2.0%sy, 0.0%ni, 95.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu13 : 9.3%us, 3.3%sy, 0.0%ni, 86.4%id, 0.0%wa, 0.0%hi, 1.0%si, 0.0%st
     Cpu14 : 5.0%us, 0.3%sy, 0.0%ni, 94.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu15 : 11.3%us, 5.6%sy, 0.0%ni, 81.8%id, 0.0%wa, 0.3%hi, 1.0%si, 0.0%st
     Cpu16 : 6.3%us, 0.3%sy, 0.0%ni, 93.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu17 : 11.9%us, 5.6%sy, 0.0%ni, 81.5%id, 0.0%wa, 0.0%hi, 1.0%si, 0.0%st
     Cpu18 : 40.9%us, 0.0%sy, 0.0%ni, 59.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu19 : 10.6%us, 4.3%sy, 0.0%ni, 84.4%id, 0.0%wa, 0.0%hi, 0.7%si, 0.0%st
     Cpu20 : 2.3%us, 0.7%sy, 0.0%ni, 96.7%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Cpu21 : 14.9%us, 6.6%sy, 0.0%ni, 76.8%id, 0.0%wa, 0.3%hi, 1.3%si, 0.0%st
     Cpu22 : 5.6%us, 0.3%sy, 0.0%ni, 94.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
     Cpu23 : 3.3%us, 0.7%sy, 0.0%ni, 95.7%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
     Mem: 49454804k total, 33344956k used, 16109848k free, 1931968k buffers
     Swap: 50331640k total, 66092k used, 50265548k free, 11654696k cached
     PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
     22509 mtsmsc 18 0 34.3g 17g 14m S 260.4 37.6 1511:00 java
Many thanks in advance.
Edited by: 906759 on Jan 16, 2012 1:12 AM

When we use JE as following configuration, CPU utilization is consistently high ans sometimes low.Do you consider this a problem? Or are you just asking for general tuning advice? Normally, high CPU utilization is considered to be a good thing.
Some additional questions:
* What version of JE are you using? If you are writing a new app, be sure to use JE 5.0.
* What is the total/maximum size of your data set?
* What is the key size (byte length)? (I see the data size is 0.5 to 1.0 KB)
* Are there no read operations?
* You mention throughput numbers (for example "%80 of inserted records will be updated 1 time in one second"). Is this a goal, or the measured value in your test, or both?
A couple initial comments:
* Calling Environment.sync is not appropriate for durability in JE 5.0, and will negatively impact performance. Instead use Environment.flushLog.
* Using multiple Environments in a single process is not recommended for maximum write performance. A single Environment with a shared cache (EnvironmentConfig.setSharedCache(true)) will result in better write throughput, because all writes are appending to the same log file and disk head movement is minimized.
* You may see better performance by using the DPL (persist package) or a custom binding, rather than SerialBinding. In general, if you find you are CPU-limited, take several thread dumps during this period too see if most threads are executing in the same place.
Performance tuning is an iterative process. Be sure to try only one change at a time to determine whether the impact is positive or negative.
--mark

How to maintain the data in the view cluster

we are doing upgrade, we have one view cluster app_log in this object scwb
and subobjects is swtlo1,02,03 like i have some subobjects in 4.6c we transported the view cluster to ecc6.0 in ecc 6.0 i have object scwb but subobjects doesn't exist how to maintain the subobjects in view cluster.

Definition
A view cluster is a group of maintenance dialogs which are collected in one maintenance unit for business or technical reasons. They allow related data in more than one table/view to be maintained consistently.
Use
Whereas only 1:1 relationships can be processed in maintenance views (except for language-dependent texts), key extensions and relationships of cardinality N:M can also be handled in view clusters. Maintenance dialogs with no key, or partial key-dependence, can also be combined into view clusters.
Grouping dialogs into one maintenance unit has the following advantages for data maintenance:
Navigation: A view cluster contains convenient standard navigation between the individual maintenance dialogs. This simplifies the maintenance of the data in a view cluster.
Consistency: The view cluster ensures data consistency when deleting, copying, saving, retrieving and manually transporting data. For example when an entry in a higher-level view is deleted, , it automatically ensures that all dependent entries in lower-level views are also deleted.
You can first split tables with a lot of fields into various views and then collect them into a view cluster.
Use tabs to format very wide tables with a lot of fields.
Structure
Navigation in a view cluster is usually based on the hierarchy of the tables/views on which the dialogs are based. A view cluster usually consists of one or more root dialogs and the at most 14 maintenance dialogs which depend on them. A view at a lower level has one or more additional fields in its key compared its higher-level view. Each data record at the higher level has several dependent data records below it.
Each maintenance dialog is an independent unit consisting of an overview screen or an overview and a detail screen, depending on the dialog type. As well as the data to be maintained, the overview screen contains a navigation area, in which you can go to higher or lower level maintenance dialogs.
One-level maintenance dialogs only contain one screen, the list screen, in which all existing data records are displayed in a table. In a two-level maintenance dialog, double-clicking on a data record in the list screen takes you to the detail screen, which displays all the fields in the selected data record.
Generate a maintenance dialog for each view before you call the cluster maintenance (SM34). When you generate the maintenance dialog, flag the key fields which are identical in the view and its higher-level in the cluster, with the maintenance attribute S. The system fills the key fields when you go from the upper to the lower level, with the values of the data record selected in the upper level. Go to the transaction SE54 to define a view cluster.
<b>Rewards point if useful.......</b>
regards....
Abhaysingh.

Visualizing SAP XI routing configuration across the system landscape

Hi Experts
Iam facing some challenges in visualizing SAP XI routing configuration across the system landscape (Development, Quality, Production). Basically routing is based on a field (technical target system). Depending on the environment we have different target systems (different Mainframe DB that represent the same target system) configured.
Any word/excel/ppt/pdf templates or any comments that could help visualizing routing would be highly appreciated.
Thanks! Santosh

Hi Santhosh,
If you are worrieed about how your Business Systems will change when you move from Dev to QA to PROD for the Configuration in your ID, then the answer is simple.
You can create transport target for your Business System and so when you migrate the ID objects from dev to Qa and so on, the business Systems will be automatically replaced.
Take a look at this blog,
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Regards,
Bhavesh

How to define Maintainance fees in REFX?

Hi All,
There is Lease Out Contract. How can we maintain the discount percent in the contract condition?
Information :-
Detail : (per room)
            Price: 2.000.000 VND/Month
            Discount : 3%
            Net Amount : 2.000.000*(100%-3%)= 1.940.000 VND/Month (A)
            Fee    : 300.000 VND/Month (B)
            Number of Room : 1 (C)
            Fee is free for 8 month when contract is signed.
Summarize : (Per room)
            Amount : (A+B)*C =2.240.000 VND
            VAT (10%)        = 224.000 VND
            Gross Amount : 2.464.000 VND
How to configure it REFX?
Thanks in Advance

Hi,
I will try to help you in the configuration. Before that may i know the following details.
1. What entries you want to post in to the customer ledger.
2. Do you want to show discount as gross or net?
Thanks,
Bala.

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver?

How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver? Please and thank you!

example.com is a generic http:// address to illustrate the difference between what you gave, file:/// and an actual URL address. There are no tutorials on that site. Sorry for the confusion.
#1 Have you procured your domain name and web hosting yet? You'll need to do that to publish your pages online.
#2 When you sign-up for web hosting, the company will send you FTP log-in credentials to your site's web server. You will enter this info into your DW Site Definition. Site > New Site > See screenshots below:
Under Servers: Root Directory is whatever your hosting company tells you to use. This varies by web host. Some commonly used ones are public_html, www or htdocs.
After your site definition is set-up, hit the TEST button to confirm it's working. If it's not connecting, go to More Options.
Go to the Files Panel (F8). Use the UP Arrow to PUT files to remote server.
Use the DOWN Arrow to GET files from server to your local site folder.
Post back when you have finished uploading your work to the remote server.
Nancy O

How do I maintain my Time Capsule hard drive?

How do I maintain the hard drive in my Time Capsule, say I wanted to maintain it with Disk Utility, Drive Genius, or Disk Warrior?
How should I connect to the TC from a MBP? I understand wireless or ethernet is not the way to do this.

apple says to never run disk utility on a time capsule disk and says when you reboot the time capsule it will check the file system. i tried to run disk utility on a sprase bundle and it trashed it and made it unusable. from other things i've read, it made it sound like if you need to run disk utility, or disk warrior, your supposed to remove the drive from the time capsule and connect it directly to the computer.

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

How can I maintain more than one contact person for a supplier

Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AM

Dear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN

How do I manage my iCloud Data across my apple devices

How do I manage my iCloud data across various devices....like my iPhone 5 and Macbook

If you are using the same iCloud account on all your devices (as recommended), then you could manage your iCloud storage in "Settings > iCloud > Storage & Backup > Manage Storage" which would have effects accross devices.

HT1660 How can I maintain two separate itunes accounts on one single device without erasing either set of data?

How can I maintain two separate itunes accounts on one single device (iPhone 4) without erasing either set of data when syncing with itunes?

Hi,
Depends on what you trying to setup but for purchases, you can roll down at the very end of the iTunes/AppStore pages to logout of your current account and then login into a different one. Then your purchase will be billded to this new account. Everything will sync as you used to but in order to use the purchased content in iTunes or other devices, you will need to authorize them (you can have up to 5 devices authorized for an account).

How can i print a network configuration page , i need the IP on a ph1510

how can i print a network configuration page , i need the IP on a ph1510

Hi,
What is the exact printer model?
If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I maintain consistent ODL configuration across a cluster?

Similar Messages

Maybe you are looking for