How do I modify an Illy .eps to get rid of IDs 'effective resolution' preflight error?

Hi there
We are running CS5.5 here, and have had an Illustrator .eps file supplied to us which is causing problems in InDesign, bring up the 'Effective resolution' error in the custom preflight (which we have set to 300pdi min.), and ID reports an effective resolution of 250dpi. The image is not scaled in ID – it's 100%. We get this a lot, and would like to totally stamp this out and find out what is going on here.
The Illustrator file has no raster images in it, either embedded or linked. There are raster effects like drop shadow and inner glow.
I opened the illy eps, selected all, and went to Effect>Document Raster Settings, and changed the resolution from 'High (300ppi)' to 'Other', and set it at 1200ppi. I also went to Edit>Transparency Flattener Presets, and made a copy of the 'High' setting, and changed the 'Gradient and Mesh' resolution to also 1200dpi. Complete overkill. I saved the .eps (and tried 'save as' .eps, ensuring again that the correct transparency setting was used).
However, the resulting images STILL displayed the pre-flight error in inDesign.
What am I missing? HELP!!

Just did a test on this, and the Illustrator (for some reason) changed this in the .eps
To this in the .ai.
Can't use that. Gotta go with .eps.
I tried selecting all, and going to 'Object>Flatten transparency', but it just made the .eps look like the .ai. And the problem still persisted anyway...
Is it safe just to ignore this ID warning? is it going to bounce back from the printers if I dont resolve it?

Similar Messages

How can I get rid of shimmer effect in videos that I create in iMovie?

How can I get rid of shimmer effect in videos that I create from photos in iMovie?

Well, not sure - so exactly what resolution do you use to shoot? Go in your camera settings and check. And, is there a settings to choose for regular/extra/fine/superfine quality? I shoot at the highest quality - period. My size/resolution is either widescreen or larger than what I need for the movie. My TV is HD 720p - that means the screen will display 1200 x 720 pixels in HD; if you have a 1080p, it'd be 1920 x 1080. So shoot in a size a bit larger than that because they can be adjusted down without any quality loss, but can't be made larger without significant loss of quality.
But,again, the problem usually doesn't start until you add movement, but camera quality has something to do with it as well. I know that a previous camera I had was not as good and a lot of my slideshows/movies didn't come out as perfect as I would have liked. So I bought a more expensive camera - shoots in full 1080 HD and I haven't had a problem since.
As for exporting a slideshow: finish it in Photo to Movie and export to desktop at highest quality (will take a while). Here is a screenshot of my export settings:
Once done, you can simply choose that movie by going to "import movies" in iMovie and navigating to the location (I usually save to desktop - easy to find).

How can i get rid of sound effects icon in middle of screen?

How can i get rid of sound effects icon in middle of screen?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

HT2487 how do I clean my mac mini and get rid of old files and clutter please

how do I clean my mac mini and get rid of old files and clutter lease

Try using one of these applications to see what is taking up your hard drive space.
File Scanner - OmniDiskSweeper Requires 10.8 or better
File Scanner – Whatsize

How do i factory reset my phone to get rid of the previous owner?

how do i factory reset my phone to get rid of the previous owner? I got this from a neighbor cause he upgraded to a iPhone 5 and gave me his iPhone 4 and I can not do anything as it wants his password to do any downloading for voxer or itunes i can do anything on there but download so he said i have to factory reset it how do i do that i am a totally stumped on this
can anyone help me

Look harder...
Settings -> general -> reset -> erase all contents and settings.

How do I get rid of "Server responded with an error"?

How do I get rid of "Server responded with an error" in Calendar? Calendar is frozen and Calendar menu will not allow preferences or quit.

Please take each of the following steps that you haven't already tried, until the problem is resolved. Back up all databefore making any changes.
Step 1
From the Calendar menu bar, select
Calendar ▹ Preferences ▹ Accounts
Choose the affected account from the list on the left and uncheck the box marked
Enable this account
Then check the box again. Test.
Step 2
Make a note of the account settings, then delete the account and add it back with the same settings.
Step 3
If you can't add the account, the settings may be invalid. Verify them. How you do that depends on what kind of account it is. If it's a Google calendar and you've activated 2-step verification, you need to generate an application-specific password in your Google account and enter it in place of your old password.
Step 4
Quit Calendar. Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

How do I get rid of "Server responded with an error" in Calendar? Calendar is frozen and Calendar menu will not allow preferences or quit.

How do I get rid of "Server responded with an error" in Calendar? Calendar is frozen and Calendar menu will not allow preferences or quit.

If you've activated 2-step verification, you need to generate an application-specific password in your Google account and enter it in place of your old password.

I recently downloaded a program and have now lost Firefox's "awesome bar" which has been replaced by the program's own search bar. How can I restore the "awesome bar" and get rid of the other search bar?

I recently downloaded Bearshare.com which then overrode my Firefox "awesome bar". Now when I enter a search item in the search box at the upper right of my screen, I'm automatically shunted to this new search bar where I have to re-enter my search item and click return before it will begin a search. Previously, the Firefox "awesome bar" opened automatically together with my home page and I had the choice of searching using it or the default search box at the upper right of my screen. I 'uninstalled' Bearshare but it now continues to come up when I search using the right hand top search box , forcing me to use it instead of the search box at the upper right of my screen. How do I get rid of it completely so that only the "awesome bar" appears as an extra tab when I open Firefox browser?

First, some clarification:
* The location bar (often called the "awesome bar") is the larger bar on the left that shows you the address of the page you are currently viewing. As you type in the location bar it searches your history and bookmarks for matches.
* The search bar is the smaller one on the right. It typically displays an icon of whichever search engine is currently selected and may display search suggestions as you type in it.
It sounds like you are referring to the search bar rather than the location bar. You can change search engines for the search bar by clicking on the icon on the left edge of the search bar and choosing a different one. You can also choose "Manage Search Engines" to remove ones you aren't interested in using.
It also sounds like Bearshare might have changed your homepage in Firefox. To restore that you will need to open the preferences menu (click Tools > Preferences), go to the General tab (first on the top left), and click "Restore to Default".

How to get rid of the weblogic.kernel.Default errors and warning?

Hi there,
When i'm running my application deployed on WLS8.1 SP3 and the application is running fine, but the following error and warnings were thrown.
2004-08-05 11:26:30,453 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] ERROR com.bea.wlw.runtime.core.util.Config - Failed to obtain connection to datasource=cgDataSource, using generic DB properties
<Aug 5, 2004 11:26:30 AM SGT> <Error> <WLW> <000000> <Failed to obtain connection to datasource=cgDataSource, using generic DB properties>
2004-08-05 11:27:12,281 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.default.elementattributes
2004-08-05 11:27:12,282 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.default.elementattributes', using defaults.
2004-08-05 11:27:12,308 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.system.groupIdCache.elementattributes
2004-08-05 11:27:12,308 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.system.groupIdCache.elementattributes', using defaults.
2004-08-05 11:27:12,386 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.region.CodeTableCache.elementattributes
2004-08-05 11:27:12,386 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.region.CodeTableCache.elementattributes', using defaults.
2004-08-05 11:27:13,527 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN com.bea.wlw.netui.script.el.NetUIReadVariableResolver - Could not create a ContextFactory for type "com.bea.netuix.servlets.script.PortalVariableResolver$PortalContextFactory" because the ContextFactory implementation class could not be found.
May i know why this is so? How to get rid of these error and warnings?
Thanks
Derek
Message was edited by derekchan at Aug 4, 2004 8:41 PM
Message was edited by derekchan at Aug 4, 2004 8:42 PM

you didnt seem to have configured the datasource / connection pool / database control with proper db properties
you should check your configuration to see if you have done it right and then you should check your application and the properties settings in the controls to ensure they are right.

How to install OSX on 2nd HD and get rid of 1st HD?

(thanks to this forum) I managed to install a second HD on my MacPro (I have to specify that I'm degree below z-e-r-o in hardware...).
now, my second HD appears on the desktop (it's set for 1 partition in D.U.)
AND THE BIG QUESTION IS:
HOW CAN I INSTALL OSX ON THIS NEW DISK AND GET RID (once it's done) OF THE OLD CRAPPY SEAGATE HD?
I know that it can be 'cloned' (I've read about for that here on the forum) but, is this the best thing to do? or shall I restart from the original APPLE CD? but how to do that...?
thanks!

Why is your Seagate "crappy?" Is it not behaving well in some manner? Because if you were to clone, the exact software issues that it has would appear on the clone. If you simply erase and install on the second empty hard drive, none of the other hard drive's software issues would be present. However, I would make sure your data is backed up before installing anything, and attempt to isolate whatever issues you are having first. If there is nothing on the second hard drive, you can go ahead and install and find out if you have the same issues on that drive. Erase and install is one of the installation options from the installation disks included with your Mac Pro. Be careful not to erase and install your original hard drive unless you are totally backed up as my FAQ explains:
http://www.macmaps.com/backup.html
P.S. in case you didn't realize it, on the internet using ALL UPPERCASE means you are attempting to shout and be rude. Please avoid it so people don't misunderstand you.

How to get rid of "entry point sqlite3 checkpoint" error on startup

When I startup my laptop (win7 64bit) I get the popup error box saying "This procedure entry point sqlite3_wal checkpoint could not be found in the dynamic link library SQLitwe3.dll. I'm realy tired of seeing it especialy seeing as its caused by Apples new and improved iTunes update. How can I get rid of it short of deleting iTunes?

When I startup my laptop (win7 64bit) I get the popup error box saying "This procedure entry point sqlite3_wal checkpoint could not be found in the dynamic link library SQLitwe3.dll. I'm realy tired of seeing it especialy seeing as its caused by Apples new and improved iTunes update. How can I get rid of it short of deleting iTunes?

HT6196 how do I edit a movie clip to get rid of unwanted parts of a clip

how do I edit a movie clip in thelatest version of I movie to get rid of unwanted parts of a clip

You can split a clip into pieces using Quicktime Player. See:
http://support.apple.com/kb/PH5879?viewlocale=en_US&locale=en_US
for details.
Second question:
I don't know what you want to acheive but yhe only way I can think of to move a precise time into a clip is to select it and trim it - whilst trimming the time amount trimmed is displayed. Stop when you have the right amount then position the playhead there. You can then 'untrim it' and he playhead will be at the desired spot.
Geoff.

How do you "clean up" your computer and get rid of programs?

I want to get rid of things I don't use. But how do you do that without deleting something important by accident? How do you do that when you don't recognize certain programs? Open each one at a time and decide if I want to keep it or not?
I'm referring mainly to things I may have downloaded but some of them on there make no sense and having a hard time reading the names. Is there a faster way to approach this without destroying something that doesn't need to be? Thanks.

How do you do that when you don't recognize certain programs? Open each one at a time and decide if I want to keep it or not?
I'm not aware of another way to decide which applications to delete.
These links may be helpful.
http://www.thexlab.com/faqs/uninstallingapps.html
http://www.thexlab.com/faqs/freeingspace.html

I got a new computer. How do I change my sync settings to get rid of the old one and add the new computer?

I got a new desktop computer and a new ipad. I need to find out how to remove the old devices from my itunes sharing. Also need to find the easiest way to get my content to the new ipad without using cloud.

You can de-authorise the old computer from the store menu in iTunes on that computer.
You can't de-authorise just the computers you no longer have access to.
Your only option is to de-authorise all your computers and then re-authorise those you wish to be authorised. You can do this by logging into your account settings in iTunes on your computer (Store > View My ID) and selecting the option to de-authorise all.
Please note however, you are only permitted to do this once in each 12 month period, therefore you would be better de-authorising your computers before you lose access to them. you can do this from the 'Store' menu in iTunes.
To copy your library to your iPad! connect it by USB, select it from the device list in iTunes and check the items you want to sync, then select sync.

How to unistall shapeshifter and application enhancer to get rid of bits of dock end

hi i have an 12 inch powerbook g4 2005 and i did run it on tiger and made the dock 3D using shapeshifter and application enhancher and when i tried to eject them after i got os x 10.5.8 but it doesn't show up on search but when i go on system prefernces it shows and can use it but i don't know how to unistall it
please help

Hello,
Double-click the "Install ShapeShifter" icon and click on the "Uninstall" button (the installer will move all ShapeShifter files to the Trash - it will never actually delete any files on your system).
Remove the file named "ShapeShifter.prefPane" from the Library/PreferencePanes folder in your home directory and the file "ShapeShifter.ape" from the Library/Application Enhancers folder in your home directory

How do I modify an Illy .eps to get rid of IDs 'effective resolution' preflight error?

Similar Messages

Maybe you are looking for