How do I play my 16/9 QT file  with the right Aspect Ratio in QT?

My Quicktime file is 16/9 NTSC but when i play ti like in QT or on the web it is squeezed to 4/3.

When you export you need to adjust for the aspect ratio. For example, export 640x360...for that is 16:9. 640x480 is 4:3.
Shane

Similar Messages

  • How do I make Applescript to compress 2 filez with the same name?

    Hello guys and thank you for reading this!
    I don't know a lot about programming, but i believe applescript can save my life. What I need is.
    Detecting 2 files with the same name, but differnt extension. (song 1.jpg, song 1.mp3)
    Compressing those 2 files into a single .zip (In the end I would have song 1.jpg, song 1.mp3 and song 1.zip
    And that's it! I know its pretty simple, and I've seen the "Create Archive" in automator, but I don't really know how to tell him which files to Compress.
    Thanks again!

    Hi,
    Try this script :
    set sourceFolder to choose folder
    tell application "System Events"
          {name, name extension} of (files of sourceFolder whose name extension is not "zip")
          my compress2FilesSameName(the result, sourceFolder as string)
          repeat with i in (get folders of sourceFolder) --check in subfolders
                {name, name extension} of (files of i whose name extension is not "zip")
                my compress2FilesSameName(the result, path of i)
          end repeat
    end tell
    on compress2FilesSameName(tList, tFolder)
          set tnames to item 1 of tList
          set tExtensions to item 2 of tList
          set tc to count tnames
          set j to 1
          repeat while j < tc
                tell (item j of tExtensions) to if it is not missing value or it is not "" then
                      set n1 to (count) + 2
                else
                      set n1 to 1
                end if
                tell (item (j + 1) of tExtensions) to if it is not missing value or it is not "" then
                      set n2 to (count) + 2
                else
                      set n2 to 1
                end if
                set name1 to item j of tnames
                set name2 to item (j + 1) of tnames
                if (text 1 thru -n1 of name1) = (text 1 thru -n2 of name2) then -- same name
                      set tFile1 to quoted form of POSIX path of (tFolder & name1)
                      set tFile2 to quoted form of POSIX path of (tFolder & name2)
                      set zipFile to quoted form of POSIX path of (tFolder & (text 1 thru -n1 of name1) & ".zip")
                      do shell script "/usr/bin/zip -j  " & zipFile & " " & tFile1 & " " & tFile2
                      set j to j + 2
                else
                      set j to j + 1
                end if
          end repeat
    end compress2FilesSameName
    if an archive already exists with the same name (in the parent folder of the files to compress) , the ZIP command overwrite this ".zip" file.
    Example  with "song 1.jpg", "song 1.mp3" and "song 1.zip" :
    If "song 1.zip" doesn't exist, the ZIP command create the "song 1.zip" file.
    If "song 1.zip" exist, the ZIP command overwrite the "song 1.zip" file (it will not create a new archive).

  • How do I play a video and audio file at the same time on Apple Tv?

    I need to play a video loop (with no audio) on my apple tv and also play some music in the background. Its a video loop with no audio and then I need music to play in the background. The loop needs to repeat all day because its only 5 min long and the audio is an entire play list that's several hours. This is for a lobby flat screen setup.

    QuickTimeKirk wrote:
    Very difficult request because the Apple TV can only play one file at a time. It doesn't have a "loop" feature.
    You could use QuickTime Player Pro to "join" the audio files into one file. The hard part would be adding the five minute video chunks via copy/paste as each would be added as a new "video" track. QuickTime .mov files can have up to 99 "tracks" and the .mov container is supported by Apple TV.
    So this new file would have a new video track (actually just a copy of the original) that played up to 98 times. A five minute source video would end up being a bit over 8 hours in duration.
    The 98 track video could be "flattened" into one video track via export. The same for the audio track movie.
    Other options:
    Set the Quicktime Loop flag in the movie inspector properties.
    Make a video playlist, adding the file to the playlist lots of times - make sure playlists are enabled in Settings for video not just music.

  • How to install an entire directory structure and files with the LabVIEW installer

    I think I may be missing something on how to do this - preserve a file directory structure in the LabVIEW build process.
    Is there an easy way to distribute an entire directory structure (multiple directory levels/text files) and have the LabVIEW build process properly preserve and install them?   I included a directory in my build specification but it completely flattened the file structure and then so when the installer builds it, the resulting structure in the /data directory is flattened as well.    I'd prefer not to go through each file (~100) and setup a specific target location.   Is there an easy way to preserve the file structure in the build process/installer process that I am missing (maybe a check box that I didn't see or an option setting somewhere)?
    -DC

    Hi DC
    Sorry for the delay in responding to your question.
    You should be able to do this using a 'Source Distribution' as described below:
     - Right click on 'Build Specifications' and select 'New' - 'Source Distribution'
     - Provide a name
     - Add your files to 'Always included' under 'Source Files'
     - Under 'Destinations' select 'Preserve disk hierarchy' and ensure that 'Directory' is selected as the 'Destination type'
    When building an installer your can then choose to include your source distribution and it will be installed to a location of your choosing.
    Hope this helps.
    Kind Regards
    Chris | Applications Engineer NIUK

  • How to crop a whole selecton of pictures with the same aspect ratio?

    I want to crop a whole selecton of pictures with the same aspect ratio.
    I shoot my pictures in 4:3 and I want to use Lightroom to crop them all for example to 16:9.
    So I have only to adjust the size and it's done!
    I use Lightroom 4.4

    Thanks. It works! Prima!
    It's a little bit difficult for me to write and understand the English terms correctly, cause I am German.
    I did not recognize, that I had to go to the Library Module!
    Here I repeat Rikk's way in German:
    Im Bibliothek-Modul
    Rasteransicht
    Bilder selektieren
    Im Menufeld Ad-hoc Entwicklung:
    Freistellungsfaktor einstellen: 16:9

  • How can I get Firefox to respond to files with the .nxg extension?

    I have been trying to open other pages than the home page of this site http://www.marinemachining.com/ and the only way that I can get them to open is to right click the URL button and choose open in a different tab or new window. Just clicking on the button should go to the page (for example "Propeller Shafting" and this will not work. Any help you can give is appreciated. Seems this Netopia file extension .nxg is not dealt with right now unless I have set something up wrong. Otherwise, I love Firefox.

    Are that files that you have saved on your computer or web pages that you try to open?
    Are you opening the files with a double-click in Windows Explorer?
    See also http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.1 r82
    # Next Generation Java Plug-in 1.6.0_21 for Mozilla browsers
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
    Update the [[Adobe Reader]] plugin to the latest version.
    *http://get.adobe.com/reader/otherversions/

  • I have and apple tv,,..how do i play movies,from my apple mac,onto the apple tv..my movies are not on my itunes,but on an external hard drive...i just want to mirrow whats playing,on my mac to the tv...

    I have and apple tv,,..how do i play movies,from my apple mac,onto the apple tv..my movies are not on my itunes,but on an external hard drive...i just want to mirrow whats playing,on my mac to the tv...

    Are the movies in the correct format:
    Video formats
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Audio formats supported
    HE-AAC (V1), AAC (16 to 320 Kbps), protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV; Dolby Digital 5.1 surround sound pass-through
    When you say tit only sees your music folder, are you saying it only sees your music folder or does it see other empty folders.

  • How do you play mine craft on a mac with 2 screens fullscreen

        how do you play mine craft on a mac with 2 screens fullscreen   i play mine craft and i have a mac pro with 2 screens and i want to know how to play mine craft with both screens

    Up until Mavericks, the default setup for multiple displays was "Extended desktop". This picture show how it works far better than any words I could post here:
    The blue boxes are Icons for your displays, whose sizes are proportional to the number of pixels. Drag the boxes so that they accurately represent the placement of the displays on your bench (left, right, up, down). Then the mouse moves freely across the boundary between displays, and you can drag a window with it. You can also stretch a window so that it covers most of both screens.
    The small white header is an Icon for the MenuBar, which is also moveable.
    for Mavericks and later, a different scheme "Displays have separate spaces" becomes the default, but can be annulled by this setting in Mission Control:
    "Full Screen" is a concept ported from iOS, the land of tiny screens and one-at-a-time processing for the iPhone. If you have multiple screens, invoking "Full Screen" will make most of the screens stop working entirely, which your main window expands into the MenuBar area. Do not use "Full Screen" on a Mac with multiple screens.

  • PP CC 2014 plays video fine from .mts files, but the audio is glitchy and jumpy.

    Premiere Pro CC 2014
    OSX 10.9.5
    I have imported .MTS files from one Canon C100 into PP through the Media Browser. I kept the file structure intact from the camera when copying. When I play a file in the source or program monitor the video plays back perfectly; however, the audio is glitchy and jumpy. It will skip time, jumping forward and backward seemingly randomly. If I open the same clip in Quicktime 10, it plays back 100% normal. I have restarted, reimported, and even transcoded the files to Pro Res 422 using Media Encoder CC 14. Nothing fixed it. The audio glitches the same way in the transcoded Pro Res Files.
    This is only the first of three cards of media. In total I have 120 .mts files in three separate AVCHD folders from a three camera C100 shoot. This leads to another issue I know I will run into. There will be three .mts files named "001," three named "002," etc. I have solved this issue in the past simply by transcoding, but that again failed to work for me thus far. So if I must stick with the .mts files, does anyone know a workflow for using multiple .mts files with the same name in one project/timeline?
    Thanks

    I find it hard to believe that this fixes the root of the problem as the same files playback fine in CS6. CS6 and CC 2014 should be referencing the same codec library on my system, right? If this is the case, then there is something wrong with how CC14 is decompressing the footage with the codecs that are working fine in CS6.
    To further this point. I imported the same files into CS6. CS6 played them back fine, so I saved the session and opened it up in CC14. CC14 converted the project file and all media loaded and plays back normal now.
    So if this is a codec issue, it would not have been solved by opening the files first in CS6. It also would not be solved as so many others report by moving the files and relinking to the new folder. It seems to me to be an import issue that is solely in CC14, not CC or CS6.

  • How to send music from a ipodtouch to another with the bluetooth??

    how to send music from a ipodtouch to another with the bluetooth??

    There is no way you can do that. You should either transfer the music to the phone and play it from there, or you should connect the speaker to the computer itself (provided it is Bluetooth speaker).
    Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
    If I've helped, use the Kudos button to thank

  • How do I get iTunes to accept FLAC files into the library?

    If I want to use iTunes to catalog FLAC files (but NOT play them...as I use my logitech Squeezebox fior that) how do I get iTunes to accept FLAC files into the library?

    As polydorus notes, iTunes has the huge shortcoming of not handling FLAC. 
    There are plugins that allow iTunes to play FLAC, but everything I've seen says they are problematic. 
    A much better approach is to get a 3rd party conversion program such as Switch and convert the FLAC files to an iTunes-compatible format such as  AAC or AIFF.
    Put the converted files in your iTunes library, and keep the original FLACs on hand for when you are using a more capable player.

  • I have the latest itunes and I've just purchased a season from a series but I cannot the episodes even though they seem to be downloaded. I'm going to the purchased section find the episode and pre play but it only comes up with the 30 sec trailer.

    I have the latest itunes and I've just purchased a TV series but I cannot watch the episodes even though they seem to be downloaded. I'm going to the purchased section find the episode and press play but it only comes up with the 30 sec trailer rather than the full trailer.. any suggestions?

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • How do you put safari web pages into icloud with the safari iCloud button?

    how do you put safari web pages into icloud with the safari iCloud button?

    What that button does is sync your tabs between your devices. So if you have multiple macs with Mountain Lion and/or devices with iOS 6 (once it comes out this fall) you can pick up where you left off. For example, let's say I have apple.com, nytimes.com, and facebook.com open on my mac, but I need to run. Later, if I need to use another computer in my household, I can just restore the tabs that I was using before on this other mac.

  • How can I pass multiple condition in where clause with the join table?

    Hi:
    I need to collect several inputs at run time, and query the record according to the input.
    How can I pass multiple conditions in where clause with the join table?
    Thanks in advance for any help.
    Regards,
    TD

    If you are using SQL-Plus or Reports you can use lexical parameters like:
    SELECT * FROM emp &condition;
    When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
    SELECT &columns FROM &tables &condition;
    But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
    Best of luck!

  • How can I login and retrieve my user file from the trash?

    I was trying to find out where all my HD had gone, which a did using ‘What Size’.
    I found what looked like an old backup file so I put the file in the trash.
    It turns out that the file was my user file. So now I can’t login to as the user.
    How can I login and retrieve my user file from the trash?

    The Digital Editions forum is here, in case this is what you are talking about:
    http://forums.adobe.com/community/adobe_digital_editions
    If you are not, I apologize for the misunderstanding.

Maybe you are looking for