How do I play (not burn) a DVD on Yosemite OS. I have a built in player.

How do I play (not burn) a DVD on Yosemite OS? I have a DVD player inside my MacPro.

Open:
/Applications/DVD Player.app
Insert the DVD.
Press Play.

Similar Messages

Why does brasero not burn a DVD?

I have a DVD to burn, but every time I run Brasero I get a message to insert an empty disk or otherwise it will attempt to make an image. With the empty disk inserted seems like brasero does not see the device and disk.
With my external DVD writer connected I can't burn anything to it. The user is added to optical group and the device is found. Growisofs however works with the provided path. Why does brasero not see the writer and how do I make it burn the dvd?
Last edited by tasty_minerals (2012-07-22 23:04:14)

A likely cause of this error is that some program did not report memory usage correctly to the OS.
This ARTICLE will give tips on finding "clues" as to what was happening at that moment. Chances are good that that program, or Process is identified somewhere in the Event Viewer. Now, be prepared to do a bit of reading, but follow EVERY link in any of the error, or warning messages.
Good luck,
Hunt

DVD is Not Burning in DVD Studio Pro

DVD is Not Burning in DVD Studio Pro 4.2.0

I used build and format approach. Both discs play fine on computer platforms, but not on a consumer DVD connected to the TV. Normally I have no problem. I checked and rechecked several times all the preferences for Studio Pro. The only thing I noticed was instead of generating a Video and Audio TS file, it generated one HVDVD_TS file. Is this the issue? If so,where do I correct this (in the settings)?
Thanks

My Adobe Premiere Elements 12 will not burn a DVD.

My Adobe Premiere Elements 12 ................. will not burn a DVD. I am using an ASUS model 11BB Desk top I recently purchased. The PC shuts down immeniately. I am using DVD-R mini and standard size disc. My subject Adobe works well on another computer.
Ken McAdams
Message was edited by: Geoff the kiwi
Serial number removed.
Note: never disclose your serial number.

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Idvd will not burn a dvd

I have tried to burn a dvd with no luck, I have a macbook for over two years and never has the idvd been able to burn a dvd. The dvd is ejected just before it is done "less than a minute remaining" the disk is always blank. I have put several projects together in idvd and can only view it on my macbook. Everything is updated, I have spent alot of time tring to get the idvd to burn but no luck. Is there anything else that I can use to burn a dvd?

Compose the DVD, recording it to the desktop. Will have img after the name. After you've composed the DVD ready for burn, instead of using iDVD, choose from the top left, drop down menu, for burn to disc image. (That's the same menu drop down you use for choosing your film in the first place.) When that's done, click on the disc icon which has appeared on the desktop, that one with img after the name, and that will make a box appear showing video and audio records. Click on the red + to get rid of it. That action will have made the disc to be seen and ready for burn in Utilities. Chose Go from the screen top and then Utilities - Disc Utility App. On the left side of the box is that name followed by img. Click on it. Go the top and in Images menu go down to burn and click on it. Your drawer ready for the burn should open. Pace your disk in the tray and choose Close. When Burn comes up, small box to the right, click on that and await results. Good luck.

Audio soundtrack won't play when burn to DVD or save to a file! HELP!

When I edit and playback a video project, the soundtrack plays back fine. But when I burn to DVD or export to a file, the soundtrack is silent. It DOES still play audiotracks that are from the original video footage, but it won't play the soundtrack song that I added to the video. I have this problem only when I make a HD version. The sountrack source file is in standard WAV format (44.1 khz). The project settings include:
Editing mode HDV 1080i
Timebase 29.97 frames/sec
Video frame size 1440x1080
Thank you for your help!!!

Glad that it worked.
As to why the Fixed Soundtrack sometimes has issues, I haven't a clue. What version of PrE are you working on?
Several users have reported issues with both the Fixed Soundtrack, and Narration Tracks, not working properly, but those cases seem to be Project specific, in that when the same users use those Fixed Tracks, in other Projects, everything works fine. In every case, that I can recall, the "fix" has been to Move the Audio Clips to an empty "regular" Audio Track.
The issues seem to have cropped up in about PrE 7, and continued through PrE 9. Again, because the problems with those Tracks, seems to be Project related, it is tough to diagnose what the real "cause" is. To date, I do not recall anyone having the issues in PrE 10, but maybe no one has hit the right combo of criteria (we have never been able to nail down what those criteria are) in a Project, to cause the problems.
Wish that we could track the problem down to something specific, so we could just say, "Don't do that," but we do not know what "that" is. Until we do, we'll just keep recommending that users Move the Clips to another regular Audio Track.
Good luck,
Hunt

IDVD will not burn a DVD - just disk image - why not?

I did a short iMovie project (just about 6 or 7 minutes of video); used a theme, added background music from my iTunes collection-- OK all fine; exported via "Share" to iDVD (all this is iLife'09 and Leopard 10.5.6 on a MacBook May 2006).
I did a DISK IMAGE but then also wanted to test to burn a real DVD. That got to to final step then hung- said one minute to go, then ejected the DVD - but nothing was on the DVD.
Later I used DISK UTILITY to burn the disk image to a DVD- and that DVD played fine on my Mac and even on my 7 year old DVD player.
OK so my MB DVD burner is working; the iDVD makes a valid Disk Image-- but why can't I go directly from iDVD to a DVD?
Thanks for any comments here -- I believe there has been a bit of discussion on this, but not sure if others are able to make a DISK IMAGE and then (if then) burn a DVD as I have. But I'm still not able to do this directly from iDVD.
Regards,
Steve Schulte
Monday 9 March 2009 at 10:50

Hi Beverly, I am using the imovie 09 version with iDVD 09. I didn't do any more editing after sharing the project to iDVD from within imovie. I get no error messages at all, that's the strange thing. It acts like it is encoding fine. But, when you watch the finished product, either a disc image or a burned dvd, it is garbled up from about halfway thru to the end. I even tried to have idvd save the project as a disc image and then used Toast 9 to burn it, and it is the same way, messed up. Just to be sure it wasn't the imovie 09 doing it, I took the same imovie 09 project, put it in Toast 9, and let Toast save it as a disc image, and it was fine. And I burned it with toast and the dvd played fine. I then tried to share the same project again, from imovie 09, to idvd 09, and save to disc image, and or burn it to dvd and again, it messes it up badly. This is a brand new imac bought from the apple store locally. I really can't understand why idvd 09 is this bad? It doesn't make any sense. I've eliminated imovie 09 as the problem. Like I said before, I have a lot of experience using the previous versions of imovie 6, and idvd 6 on a powerbook G4, without any problems? Oh, and I did get the menu sound to work, but not the method listed here. I tried all of those listed, without success. I found that if you keep dragging out the menu sound, and replace it with a new mp3, and drag it out, it finally works. I did this about 6 times. Then, all of a sudden it worked. Makes no sense at all. I never did see the little wave sound thing he talked about. It works now, but the wave isn't there? If there is a way to just remove idvd 09, and replace it with idvd 6.04, I'll do that. Is this possible?

How am I supposed to burn a dvd in iMovie 10?

C'mon !!! Just when I think I amy even know a little something....it all changes! With my upgrade to OS Maverick, so did my iMovie....to 10.0.1.
Of course, I now created a project (with great difficulty) and need to burn a DVD....something that seems to have been taken away.
REALLY!?
Looking back, I found the suggestion to use "Share" and save the file. Which I did.
I open iDVD ..but the suggested file => import...has no active link.
WILL SOMEONE tell me how in the **** to burn DVD's now?

Didn't you hear? Optical media is dead. Clearly you don't need DVDs anymore. It must be true because Apple decided it. If you think you do need them, well you are just mistaken
There is good news coming!
Technology experts are working on a movie storage system where YOU have physical possession of the movie.
This system stores the movie digitally on an optical disk system that will not be dependent upon a congested, complicated, and fragile network.
Because all of the data is stored only a few feet from your television, all the bottlenecks are removed. Performance and reliability are virtually flawless.
Further, the system will not utilize any form of security codes, authentications, or passwords. Once the optical disc is purchased it can be moved around freely at will, and can even be lent or given to friends and neighbors with zero hassles.
And if you don't like the movie, you can sell it for close to your purchase price!

Since 10.4.4 (10.4.5) - i can not burn Data-DVDs anymore...

System: iMac G4, 1GHz, 1GB RAM, Mac OS X 10.4.5, 4x SuperDrive (SONY DVD RW DW-U10A)
Dear Apple Support,
since Mac OS X 10.4.4 (same with 10.4.5) i can not burn a Data DVD-RW anymore. It is so annoying. I want to burn my backup on a DVD-RW with the Burn Folders in Mac OS X. it is not possible.
The Finder burn dialog hangs at the "ending burning process". It is so annoying.
It's not possible to erase this "half burned" DVD-RW too! So I have here a lot of destroyed DVD-RWs around me...
The burning of DVD-RWs is a problem since 10.4.0 here on my machine. With 10.4.3 it was half o.k. ... But since 10.4.4 (10.4.5) nothing works anymore.
Your product "Mac OS X Tiger" is nearly one year in the market. And burning a Data-DVD is not a exotical thing. It is a essential feature of a Operating System today. So what are you doing in your Test-Labs?
I am sitting here since 1 year with an Operating System from Apple an it doesn't works in the essential features.
Whats about your slogan "It just works"?
What happens with the quality of Apple?
Under 10.3.9 Panther i can burn everything. It absolutly no problem there.
So i don't understand what are you doing with Tiger?
It's so annoying!
Regards
Roessner

Hi,
I've got exactely the same problem and I have no solution at the moment.
Is there someone who could help us, please?
Thanks !
you can reply to : [email protected]

I can not burn a DVD-R in my Imac!

Error: The burn to the OPTIARC DVD RW AD-5690H drive failed. The disc drive did not respond enquiry.c and can not recover or retry.

Ffirst and foremost you have to use the very best in blank media, like Maxell, Sony, or one of the many others. Next is the disc burning software you use. Last what is the content, movies, data, or anything it may be. (EXAMPLE) Some users have had issues burning from Microsoft Office Software. More info would surely help.
CHEERS
DON

Can not Burn CD/DVD after update to 10.6.7

Since I have updated to 10.6.7 from 10.6.6, I can't burn a DVD or CD in the Super drive. I switched back to 10.6.6 and everything worked, switching back to 10.6.7, no burning can happen. The burn file locks and would not allow the lock to be removed from the "Get Info" in the file sec. Any solution? please help

Downloaded the Combo Update (other than the one intended for 'early 2011 MBP', and it will not run on this computer. Says something like it is not authorized, or not intended for this computer. Did re-run the update for 'early 2011 MBPs' same result. Was able to solve the font display issue, but not the incorrect icon issue, and FaceTime will not run at all. Says it is not designed for the OS I have on this computer, and will not even start. I have tried to go to the AppStore, just to see if I can download the latest version - no dice. Won't let me download it. Says FT already installed on this computer. Tried deleting FT, and then downloading - same message. ?????

Idvd 08 shuts down after building, idvd will not burn a dvd

Dvd studio pro burns fine, Burning a DVD data disk works fine. Burning a project in Idvd 08 will not burn anything. It simply quits before finishing and spits out an empty dvd disk. I have a imac g5 power pc 2.1 ghz, 500gb hd, 2.5 gb ram and I am running idvd 08 version 7.0. I have tried reinstalling idvd and have even repaired permissions. What do I do? What could it be?

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• *Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb*
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
Yours Bengt W

Dvd studio pro does not burn readable dvds on other platforms

I have DVDSP 4.1.2 and always used it to create DVD with content.
Now after I upgrade to 10.6.4, I can burn DVDs but they are not readable on other platforms (PC or DVD Players).
Thank you

I have no such issues on my systems, we burn lots of DVDs. Description suggests something wrong with your DVD drive not the software or OS since neither Eric nor I can duplicate your problem.
bogiesan

Optiarc Drive does not burn DL DVDs

Hi, after looking up the post regards the Optiarc drive which came with MacPro computers I found the post about getting the error #6 here: http://discussions.apple.com/thread.jspa?threadID=1294824&tstart=0
I don't have this problem but my drive spits out DL discs when I try and burn on them. I checked Sys Profiler and drive info is:
OPTIARC DVD RW AD-7170A:
Firmware Revision: 1.N8
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 0 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RAM, -RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
I noticed that the cache is 0kb and DL disks aren't listed as supported, nor is an +media. Does anyone know if this is the reason my drive spits out DL discs? If so, does anyone have a fix for this? Do I need to reinstall or update the firmware? I'd rather not mess about with unsupported firmware if possible. Anyway, this seems a bit NQR. Can anyone help?

I have been having problems with my Optiarc drives for the last three months. After getting the error 6 and then having the drives not burn anything to fixing the burn issue and now having the problem you're having.
However, I can burn on TDK DVD+R DL 8x. When I insert Verbatim DVD-R DL 4x they just get spat out. I have two of exactly the same drive on the one Mac and they seem to perform independently.. ie. one may read a disk yet the other one wont.
So, to get a temporary fix for the Error#6 so I could use the drive I had to clear permissions. Here's a step by step of what I did:
1. Go to Users/user/Library/Preferences/ and trash "com.apple.finder.plist"
2. Restart using the install disk. (Can take a while)
3. Choose your language
4. Open "Disk Utility" from the "Utilities" menu
5. Select main drive and "Repair permissions"
6. Quit "Disk Utility"
7. Open "Reset Password" for the "Utilities" menu
8. Select the target hard drive and select the user account
9. Click "Reset Button" under "Reset Home Directory Permissions and ACLs"
10. When button says "Done" in grey, quit and restart.
After doing this I was able to burn. I am about to try the same thing to see if it fixes the disc "spit-out" issue and will post results.

Not burning, ejecting DVD

I'm trying to burn a DVD that I've burned numerous times, this is the first time after upgrading to Leopard. What happens is that iDVD goes through the whole assembling process but then just ejects the blank DVD (hasn't burned anything) and stalls in the "Burning ..." process. This happened with two brands of DVDs, so I don't think its a problem of the disks.

Hi Christoph
a. How much free space is there on Your internal (start-up) hard disk ? >25Gb OK
b. Deleting iDVD pref files and running Apple Disk Util tool (Repair permissions and hard disks)
might help. At least it's where to start when in trouble.
c. QuickTime up to version 7.3 ?
Yours Bengt W

How do I play (not burn) a DVD on Yosemite OS. I have a built in player.

Similar Messages

Maybe you are looking for