How do I print text in draft mode in CS5.5?

I'm sure this is really simple, but I'm stumped, and I haven't been able to find instructions online. A page of text I'm trying to print prints at the highest quality no matter what I do to try to change the settings. Not only is it wasting ink, but it's taking forever to print just a few paragraphs. I saw a reference in an online forum about printing in draft mode, but no instructions on how to do it. Does anyone know? Thanks.

Thanks. I meant to get back to you sooner but I've been busy. I'll have to consider looking into a laser again at some point. Last time I looked was several years ago, and prices for what I wanted (color, oversize printing, envelope printing, color photocopying) were higher than I wanted. If it would save me money to buy just an 8 1/2 x 11 monochrome for printing emails and stuff, though, maybe I should consider it. I'm doing a lot less photo printing than I used to. I also didn't want to take up more space by having two printers, but if the savings were significant it might be worth it.

Similar Messages

  • How can i print text messages from my htc amaze to my deskjet 3050A

    how can i print text messages from my htc amaze to my hp deskjet 3050A

    Hi,
    I believe the phone uses Android OS, v2.3.4 (Gingerbread) therefore you can use one of these applications:
       http://www.printeron.com/apps/androidprinting.html
       https://market.android.com/details?id=com.pauloslf​.cloudprint&hl=en
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can i print text message from my iPhone?

    I have an iPhone 5S.  How can I print text messages to save those conversations?

    Did you try to copy and paste the content into another app, like notes or Mail and then send it to the printer?

  • Wrong colors when printing PDF in Draft Mode Printing (Win)

    I am using Acrobat to print my contact sheets from the Print module (Windows). If I use the "Draft Mode Printing" in LR, colors in the resulting PDF are way off. Any idea what the settings in Acrobat should be, to obtain correct colors? I have tried many combinations in the "Adobe PDF Conversion Settings", especially in the "Color" tab, but with no success.
    Note that colors in the resulting PDF are correct instead when I disable the "Draft Mode Printing" from LR.

    No I did not build 1:1 previews first. The point of using the draft print is to me to do quick, so would rather not build any 1:1 preview. Anyway, I don't believe I got what you wrote: if I do not build the 1:1 preview, what is the color space of the print output in Draft Mode?

  • How can I print texts from iPhone4 to Canon MX870

    How can I print texts from iPhone4 to Canon MX870

    The following gives instructions. http://support.apple.com/kb/HT4517
    Note that your carrier may not support it or may have added charges.
    To use this feature, enable Personal Hotspot on your cellular data plan. Contact your carrier for information and pricing.

  • Time capsule wireless printing only in draft mode (HP D2460)

    I cannot print through time capsule wireless printing in hight quality, it prints only in draft mode. My printer is a HP D2460 and is connected to time capsule through its usb conection. I am connecting and trying to print trhough a macbook pro wirelessly connected to timecapsule.
    I already made all driver updates.
    If anyone can help, I would appreciate.
    Thanks

    no one has any suggestions ??

  • How to print Smartform in Draft mode.

    HI all,
    we are using Wipro LQ DSI 5232 printer, our problem is while printing smartform , its coming in Roman but it should come in Draft Mode.
    When it goes to Roman mode the printing become very slow.
    How to set in default Draft mode.
    Regards,
    Rahul.

    Hi,
    there is an SBO setting inside
    Administation>System Init>Print preferences>Print Draft Watermark on Draft
    Then a "DRAFT" watermark will appear if it's printed before adding.
    In CR use a stored proc to get data back according to the Objectid@.
    Then if its the object id of a draft then add a CR watermark.
    Hope this helps.
    Regards,
    D

  • How can I print my entire draft message, instead of only the part of it that shows on the screen?

    I have drafted response to a message I received. I need a copy of the draft to show my associate, but my printer will only print the portion of the draft that can be seen on the screen at one time. I have not previously encountered this problem. What needs to be changed?

    Does your email site have a print button to format the page for printing? That often gives the best results.
    If this just started with Firefox 4, it could be related to a change in how strict Firefox is about a page's HTML code. To see whether this problem is caused by the new HTML5 parser, you can turn it off like this:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''html5''' and pause while the list is filtered
    (3) Double-click '''html5.parser.enable''' to toggle it to false (it should turn bold).
    Then return to your mail site, reload the page, and test again. (Print Preview might be sufficient for testing.)
    Does that make any difference? If so, the site might not yet be fully compatible with Firefox 4 -- or you have found a bug in Firefox.

  • How can i print text contain multiple language

    hi all,
    i have swing application with JTextPane contains multiple data (kannada and English)
    i used to the follwoing code to print contatent of jtextPane and in this code i seted
    font Kedage(for kannada)
    if did not set to kannada font the kannada test is printing squre box
    if i set english font than kannada the english font is squre box,
    here how can i identify the the character is kannada and english
    help me to solve this problem or suggest me any other way to print multiple language
    text in JTextPane.
         public void printMeetingDetails(String meetingDate){
                   PrintJob pjob = getToolkit().getPrintJob(new JFrame(), "Meeting Details", new Properties());
                    if (pjob != null) {
                      Graphics pg = pjob.getGraphics();
                      if (pg != null) {
                        String s1 = taMeetingDetails.getText();
                        s1 = s1 + "\n Resolution :";
                        //String s2 = "\n This is the second paragraph for printing after the sample java code.";
                        String s2 = "\t"+taResolution.getText();
                        printLongString (pjob, pg, s1,s2);
                        pg.dispose();
                      pjob.end();
              private int margin = 72;
                // Print string to graphics via printjob
                // Does not deal with word wrap or tabs
                private void printLongString (PrintJob pjob, Graphics pg, String strEng,String strKan) {
                  int pageNum = 1;
                  int linesForThisPage = 0;
                  int linesForThisJob = 0;
                  // Note: String is immutable so won't change while printing.
                  if (!(pg instanceof PrintGraphics)) {
                    throw new IllegalArgumentException ("Graphics context not PrintGraphics");
                  StringReader srEng = new StringReader (strEng);
                  StringReader srKan = new StringReader (strKan);
                  LineNumberReader lnrEng = new LineNumberReader (srEng);
                  LineNumberReader lnrKan = new LineNumberReader (srKan);
                  String nextLine;
                  int pageHeight = pjob.getPageDimension().height - margin;
                // Font helv = new Font("Kedage", Font.PLAIN, 12);
                  Font helv = new Font("Kedage", Font.PLAIN, 12);
                  //have to set the font to get any output
                  pg.setFont (helv);
                  FontMetrics fm = pg.getFontMetrics(helv);
                  int fontHeight = fm.getHeight();
                  int fontDescent = fm.getDescent();
                  int curHeight = margin;
                  try {
                    do {
                      nextLine = lnrEng.readLine();
                      if (nextLine != null) {        
                        if ((curHeight + fontHeight) > pageHeight) {
                          // New Page
                          System.out.println ("" + linesForThisPage + " lines printed for page " + pageNum);
                          if (linesForThisPage == 0) {
                             System.out.println ("Font is too big for pages of this size; aborting...");
                             break;
                          pageNum++;
                          linesForThisPage = 0;
                          pg.dispose();
                          pg = pjob.getGraphics();
                          if (pg != null) {
                            pg.setFont (helv);
                          curHeight = 0;
                        curHeight += fontHeight;
                        if (pg != null) {
                          pg.drawString (nextLine, margin, curHeight - fontDescent);
                          linesForThisPage++;
                          linesForThisJob++;
                        } else {
                          System.out.println ("pg null");
                    } while (nextLine != null);
                    Font fMyFont = new Font("Kedage", Font.PLAIN, 12); //for kannada
                    //have to set the font to get any output
                    pg.setFont (fMyFont);
                    fm = pg.getFontMetrics(fMyFont);
                    fontHeight = fm.getHeight();
                    fontDescent = fm.getDescent();
                    curHeight += fontHeight;
                    do {
                      nextLine = lnrKan.readLine();
                      if (nextLine != null) {        
                        if ((curHeight + fontHeight) > pageHeight) {
                          // New Page
                          System.out.println ("" + linesForThisPage + " lines printed for page " + pageNum);
                          if (linesForThisPage == 0) {
                             System.out.println ("Font is too big for pages of this size; aborting...");
                             break;
                          pageNum++;
                          linesForThisPage = 0;
                          pg.dispose();
                          pg = pjob.getGraphics();
                          if (pg != null) {
                            pg.setFont (fMyFont);
                          curHeight = 0;
                        curHeight += fontHeight;
                        if (pg != null) {
                          pg.drawString (nextLine, margin, curHeight - fontDescent);
                          linesForThisPage++;
                          linesForThisJob++;
                        } else {
                          System.out.println ("pg null");
                    } while (nextLine != null);
                  } catch (EOFException eof) {
                    // Fine, ignore
                  } catch (Throwable t) { // Anything else
                    t.printStackTrace();
                }thanks
    daya

    hi all,
    i have swing application with JTextPane contains multiple data (kannada and English)
    i used to the follwoing code to print contatent of jtextPane and in this code i seted
    font Kedage(for kannada)
    if did not set kannada font then kannada text is not printing porperly(printg squre box)
    if i set kannada font then english font is squre box,
    here how can i identify the the character is kannada and english characater
    help me to solve this problem or suggest me any other way to print content of jtextpane which is in multiple language text.
    public void printMeetingDetails(String meetingDate){
                   PrintJob pjob = getToolkit().getPrintJob(new JFrame(), "Meeting Details", new Properties());
                    if (pjob != null) {
                      Graphics pg = pjob.getGraphics();
                      if (pg != null) {
                        String s1 = taMeetingDetails.getText();
                        s1 = s1 + "\n Resolution :";
                        //String s2 = "\n This is the second paragraph for printing after the sample java code.";
                        String s2 = "\t"+taResolution.getText();
                        printLongString (pjob, pg, s1,s2);
                        pg.dispose();
                      pjob.end();
              private int margin = 72;
                // Print string to graphics via printjob
                // Does not deal with word wrap or tabs
                private void printLongString (PrintJob pjob, Graphics pg, String strEng,String strKan) {
                  int pageNum = 1;
                  int linesForThisPage = 0;
                  int linesForThisJob = 0;
                  // Note: String is immutable so won't change while printing.
                  if (!(pg instanceof PrintGraphics)) {
                    throw new IllegalArgumentException ("Graphics context not PrintGraphics");
                  StringReader srEng = new StringReader (strEng);
                  StringReader srKan = new StringReader (strKan);
                  LineNumberReader lnrEng = new LineNumberReader (srEng);
                  LineNumberReader lnrKan = new LineNumberReader (srKan);
                  String nextLine;
                  int pageHeight = pjob.getPageDimension().height - margin;
                // Font helv = new Font("Kedage", Font.PLAIN, 12);
                  Font helv = new Font("Kedage", Font.PLAIN, 12);
                  //have to set the font to get any output
                  pg.setFont (helv);
                  FontMetrics fm = pg.getFontMetrics(helv);
                  int fontHeight = fm.getHeight();
                  int fontDescent = fm.getDescent();
                  int curHeight = margin;
                  try {
                    do {
                      nextLine = lnrEng.readLine();
                      if (nextLine != null) {        
                        if ((curHeight + fontHeight) > pageHeight) {
                          // New Page
                          System.out.println ("" + linesForThisPage + " lines printed for page " + pageNum);
                          if (linesForThisPage == 0) {
                             System.out.println ("Font is too big for pages of this size; aborting...");
                             break;
                          pageNum++;
                          linesForThisPage = 0;
                          pg.dispose();
                          pg = pjob.getGraphics();
                          if (pg != null) {
                            pg.setFont (helv);
                          curHeight = 0;
                        curHeight += fontHeight;
                        if (pg != null) {
                          pg.drawString (nextLine, margin, curHeight - fontDescent);
                          linesForThisPage++;
                          linesForThisJob++;
                        } else {
                          System.out.println ("pg null");
                    } while (nextLine != null);thanks
    daya

  • How to make sure text in landscape mode appeared in portrait?, How to make sure text in landscape mode appeared in portrait?

    I think a few pictures speak a thousand words. I try to get creative and design some pages in landscape mode.
    This is how the TOC looks like in landscape. As you can see there is a chapter and many pages. I didn't use sections to make sure that they don't appeared as a list in TOC page.
    This is how Chapter page looks like.
    But when viewed in portrait mode. nothing appeared.
    How shall I make sure that at least the text in chapter page goes there?
    Thanks!

    If I add a text box, it does not seem that inline is an option.
    When I create the chapter page, the bottom part is empty, but I do not know how to add text. If I add a text box, it is not inline.
    I hope to be able to add inline text which appeared at the bottom, possible?

  • How to read printed text from the browser.

    I have an API that take 2 parameters as query string and after validating it prints back 4 parameters on the browser itself like :
    para1=abc
    para2=xyz
    para3=123
    para4=pqr
    now i want to use the value of these parameters further in my program, can anyone tell me how can i take the parameter values in variables.

    I can think of two choices offhand.
    1. In addition to displaying the values, have your servlet or JSP write out a form with <input type="hidden" name="para1" value="abc"> fields in it, and a submit button. Your values will come back to you in the next post or get request. (If this is sensitive information, however, DO NOT do this unless you can re-validate the data, since it would be possible for someone to fabricate their own static page to submit bogus data.)
    2. Put the data in the session object, using the setAttribute(...) method, and retrieve it on the next page using getAttribute(...).
    You cannot really "read" the page that is visible on the user's browser.
    Hope this helps.
    Cheers!
    Jerry Oberle

  • How can I print / export in portrait mode?

    I would like to print in portrait mode, but I can't find anywhere to do it. Is it possible?

    I found this application .... iPhoneDrive.
    I have not tested, but it seems like it has what I'm looking for.
    Cheers
    Sirahuén

  • Terminfo question: how do I print text in RED

    Hi. Really basic question here, but I've spent hours trying to solve it.
    I have a Terminal application. I want to make some text appear as RED. I do not want to hard-code the escape characters, I want to do it with terminfo.
    I've read through the documentation many times and just can't figure it out. Any ideas?

    Well, I figured it out!
    Here is a code snipped which prints all of the termcap color:
    char *setf = tigetstr("setf");
    if(!setf) setf = tigetstr("setaf");
    for(int i=0;i<16;i++){
    putp(tparm(setf,i));printf("Color %d\n",i);
    putp(tparm(setf,0));
    Red is color 1

  • How do I print text document (spreadsheet) in 11 x 17 format with landscape orientation?

    Print preview shows only in portrait orientation when I get an image at all, then when I hit "print" icon, get instant message that says "out of memory".  Also cannot seem to get printer to recognize 11 x 17 size -- keeps saying that printer settings & paper size do not match.

    Don't want to come across as ungrateful, but I'm NOT impressed with how these postings are being handled.  Guess I should expect that with HP -- ever since their calculators came out with RPN, the culture of HP has been different from most others.
    To repeat myself, my printer is HP B8550 Photosmart, capable of wide format printing -- the reason I purchased this one after reading reviews by others  of all its features.  My OS is Windows XP Home Edition.  My problem is with trying to print out a spreadsheet format of a large genealogical database that I have created, using Windows Works.  When I open the file, create the desired printer settings, and perform the page set-up tasks, all I get when I hit "print preview" is an error message that says "out of memory", which prevents any further action.  When I clear that from the screen & try to see a print preview, I get a truncated image of the spreadsheet in PORTRAIT orientation & not the LANDSCAPE orientation that I have set the document printing for.
    While awaiting a useful response from yesterday's forum (& not getting one), I tried a different Word document while using the same 11 x 17 sheet size setting for the printer, & that document was processed without a hiccup.  I'm now more inclined to believe that there is something wrong with my Window Works software & NOT the printer software that just doesn't want to deal with 11 x 17 spreadsheets in queue or out on the stack (or heap -- wherever the machine stages such data for processing), but I just don't know.  Made a separate file using just one page of the database, thinking that maybe the 4.5 MB file size was the problem, but that had absolutely no effect on the situation -- it won't print even that small file as structured.  To display all the data, I need to use landscape orientation.  Puzzled why it won't show in that orientation even within print preview.
    ANY advice on how to get this project to work properly is appreciated -- it represents about 8 years' worth of work in creating it & I'm ready to make a hard copy to use while doing on-site work at various archives holding such records.

  • How do i print text message threads

    I would like to know if there is a way to print off a text message thread in a printer friendly format.

    Export the text messages to Word and then print them from your computer.

Maybe you are looking for